Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

The GSM Technology: Global System For Mobile Communication

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 31

The GSM technology

GLOBAL SYSTEM
FOR MOBILE
COMMUNICATION
It contains
• Introduction to gsm.
• Specifications of gsm.
• Gsm network area.
• Gsm architecture.
• Mobile station.
• Mobile identification numbers.
HISTORY
In 2001 the first commercial launch of 3G was done in
Japan. With 3G following services are available :

 Video Conferencing
 online games
 net surfing..
introduction
Global System for Mobile (GSM) is a second
generation cellular standard developed to cater
voice services and data delivery using digital
modulation.

GSM Services
TELE SERVICES : Includes mobile phones, emergency callin
DATA SERVICES : Includes SMS (Short message service), fa
voicemail, electronic mail.
SUPPLYMENTARY SERVICES : I/C & O/G calls, call forwarding,
call hold, call waiting, conference, e
Advantages of GSM
 Communication
– mobile, wireless communication, support for voice
and data services
 Total mobility
– international access, chip-card enables use of access
points of different providers.
 Worldwide connectivity
– one number, the network handles every location.
 High capacity
– better frequency efficiency, smaller cells, more
customers per cell.
 High transmission quality
– high audio quality and reliability for wireless,
uninterrupted phone calls at higher speeds (e.g., from
cars, trains).
GSM Specifications
• RF Spectrum
GSM 900
Mobile to BTS (uplink): • Carrier Separation :
890-915 MHz 200 KHz
BTS to • Duplex Distance
Mobile(downlink):935- : 45
960 MHz MHz
Bandwidth : 2* 25 • No. of RF carriers : 124
MHz • Access Method :
TDMA/FDMA
GSM 1800 • Modulation Method :
Mobile to BTS (uplink): GMSK
1710-1785 MHz • Modulation data rate :
BTS to Mobile(downlink) 270.833 Kbps
1805-1880 MHz
Bandwidth : 2* 75
MHz
now

Gsm
architecture
Network sub-system
Radio sub-system
Operation and maintenance
sub-system
Network subsystem

Performs call processing and


subscriber related functions. It
includes:

MSC: Mobile Switching Centre


HLR: Home Location Register
VLR : Visitor Location Register
AuC: Authentication Centre
EIR: Equipment Identity Register
GMSC:Gateway MSC.
Network
Mobile switching centre subsystem

• It is included in the GSM system for call-switching. Its overall


purpose is the same as that of any telephone exchange.

The functions carried out by the MSC are listed below:


• Call Processing
Includes control of data/voice call setup, inter-BSS and inter-
MSC handovers and control of mobility management (subscriber
validation and location).
• Operations and Maintenance Support
Includes database management, traffic metering and
measurement, and a man–machine interface.
• Internetwork Interworking
Manages the interface between the GSM network and the
PSTN.

When the MSC provides the interface with the other networks
in the
GSM network it is known as a Gateway MSC.
Network
Home location register subsystem

Reference database for


subscriber parameters.
 Subscriber ID (IMSI &
MSISDN).
 Current location of
subscriber.
 Subscriber status
(registered/unregistered)
 Authentication key and
AUC functionality.
 Mobile subscriber
roaming number.
Network
Visitor location register subsystem

• It provides local database


for the subscribers
wherever they are
physically located within a
PLMN, this may or may not
be the “home” system. It
is a local database and
contains copy of most of
the data stored in HLR.
It contains:
• Mobile status(busy/free/no
ans)
• Location area identity(LAI)
• TMSI AND MSRN .
Network
Authentication centre subsystem

• It provides authentication and


encryption parameters for verification
of subscriber identity.
• It ensures confidentiality of each cell.
• It protects network operators from
frauds in today's cellular world.
• It is associated with HLR.
• The authentication process will usually
take place each time the subscriber
“initializes” on
the system.
Network
EQUIPMENT IDENTITY subsystem
REGISTER
• The EIR contains a centralized database for
validating the International Mobile Equipment
Identity (IMEI).

• It contains three lists:


• White List
Contains those IMEIs which are known to have been
assigned to valid MS equipment.

• Black List
• Contains IMEIs of MS which have been reported
stolen or which are to be denied service for some
other reason.

• Grey List
Contains IMEIs of MS which have problems (for
example, faulty software). These are not, however,
sufficiently significant to warrant a ‘‘black listing”.
radio subsystem
• Management of
radio network and is
controlled by a MSC
. One MSC controls
many radio
subsystem.
It consists of :
 BSC: Base station
controller.
 BTS: Base
transceiver station.
RADIO
base station controller subsystem

 It is connected to MSC.
 Controls one or more
BTS.
 Switches traffic and
signaling to/from BTSs
and MSC.
 Connects terrestrial
circuits and channels
on air interface.
 Controls handover
performed by BTS.
 Frequency allocation
and power control.
RADIO
base transceiver station subsystem

• Maintains air interface


and minimize
transmission
problems.
• Paging information.
• Radio level power
control.
• BTS identification.
• Ciphering
• Speech processing.
OPERATION AND MAINTENANCE
SUBSYSTEM

 Dynamic monitoring and controlling


of network.
 operation and maintenance data
function.
 Configuration management.
 Fault report and alarm handling.
 Performance supervision.
 Storage of software and data.
 Stores data for minimum one year.
Mobile station (MS)

SIM is a removable module that


Mobile Equipment Capabilities goes into mobile set. Each SIM
Encryption capability has a unique number called
Frequency capability IMSI number.
Short messages service capability. Stores user addresses
Location updates. -IMSI
Voice and data recognition. - MSISDN
Identified by IMEI no.( -Temporary addresses for
International Mobile Equipment location,
Identity) roaming, etc
From Speech to Radio Transmission
Blah... Blah... Blah... Blah… Blah… Blah...
Digitizing and
Source Decoding
Source Coding

Channel Coding Channel Decoding

Interleaving De-interleaving

Ciphering Deciphering

Burst Formatting Burst De-formatting

Modulating Demodulating

The GSM technology


Gsm network area
Gsm network area contd…
Mobile Identification numbers/ mobile identifiers
. International Mobile Equipment Identity
 Uniquely identifies the mobile equipment.
 A 15 digit hierarchical address assigned to user at time of manufacturing.

International Mobile Subscriber Identity


 Uniquely identifies the user (SIM CARD).
 A 15 digit hierarchical address assigned by operator to SIM card upon
subscription .
Continued…
Mobile Subscriber ISDN Number (MSISDN)

4.TEMPORARY ADDRESS
• Call Originating from MS
• Call termination to MS
OUTGOING CALL
1. MS sends dialed number to
BSS
2. BSS sends dialed number to
MSC
3,4 MSC checks VLR if MS is
allowed the requested
service. If so, MSC asks BSS
to allocate resources for
call.
4 MSC routes the call to
GMSC
5 GMSC routes the call to
local exchange of called
user
INCOMING 1.Calling a GSM
subscribers
CALL 2.Forwarding call
to GSMC
3.Signal Setup to
HLR
4.5. Request
MSRN from VLR
5.Forward
responsible MSC
to GMSC
6.Forward Call to
current MSC
7.9. Get current
status of MS
8.11. Paging of MS
9.13. MS answers
10.15. Security
FUTURE OF GSM
 2nd Generation
 GSM -9.6 Kbps (data rate)

 2.5 Generation ( Future of GSM)


HSCSD (High Speed ckt Switched data)
Data rate : 76.8 Kbps (9.6 x 8 kbps)
GPRS (General Packet Radio service)
Data rate: 14.4 - 115.2 Kbps
EDGE (Enhanced data rate for GSM
Evolution)
Data rate: 547.2 Kbps (max)
 3 Generation
WCDMA(Wide band CDMA)
Data rate : 0.348 – 2.0 Mbps

You might also like