Technical Standards and Specifications Including Safety Standards

Technical Standards and
Specifications including
Safety Standards
for
City or Local Natural Gas
Distribution Network
Gaurav Yadu
B.A. LL.B
8th Semester
The PNGRB Act defines technical standards and specifications

including safety standards for all CGD and Local Gas
Distribution Networks.
Technical standards and specifications including safety
standards for city or local natural gas distribution networks
are as specified in Schedule-I which cover 1.
Material and Equipment (Schedule-1A).
2.
Welding (Schedule-1B).
3.
Piping System Components and Fabrication (Schedule1C).
4.
Design, Installation and Testing (Schedule-1D).
5.
Operating and Maintenance Procedures (Schedule-1E).
6.
Corrosion Control (Schedule-1F).
7.
Miscellaneous (Schedule-1G).
Introduction
The entity operating a CGD network shall have an effective Health, Safety
and Environment Management System (HSE Management System) and
Management of Change System in place to ensure overall safety during
operation and emergencies.
The HSE Management System shall cover the following key elements.
1.
HSE Policy Statement
2.
Organizational objectives to ensure implementation of the policy.
3.
Set of detailed processes supporting each activities of the HSE
management system
4.
Implementation of control and monitoring activities
5.
Periodic monitoring, review and reporting of performance
6.
Audit of internal and external activities
Health, Safety and Environment

Management
Exposure to gas leaks and explosions
Recommended techniques to prevent and control exposure to gases and explosive atmospheres
caused by accidental gas line ruptures and / or leaks include:
1. Training of employees and contractor personnel in safety procedures, together with provision
of appropriate tools and equipment;
2. Identification and location of existing gas and other buried utility infrastructure prior to
excavation for installation or repair of gas pipelines. Installation of visual marking of gas
lines as part of installation, and updating as necessary on an ongoing basis;
3. Removal of sources of ignition prior to gas venting for maintenance and repair activities.
Purging of gas from pipeline or pipe components prior to welding or cutting activities;
4. Installation of gas lines and components using sufficient separation distance and appropriate
pipe protection layering to minimize potential interference with other underground
infrastructure. Separation of plastic pipes from sources of heat;
5. Odourization of gas to facilitate detection of gas leakage;
6. Training of gas utility workers in procedures for emergency preparedness and response
involving appropriate public authorities, in addition to emergency shutdown and pressure
reduction in the pipeline system.
Occupational Health and Safety
Confined Spaces
Gas distribution companies should develop and
implement confined space entry procedures and include
the following
1. Requiring work permits for all confined space entries;
2. Installation of appropriate access controls for
unauthorized personnel including signage to alert
workers to the hazards of confined spaces;
3. Use of ventilation and oxygen / explosive level
detection and alarm equipment prior to access.
Contd
Electrocution
Excavation, construction, and repair of gas
distribution systems may result in workers exposure
to existing aboveground or underground utilities,
including aerial or buried electric transmission lines.
Identification and location of all relevant existing
underground utilities should be undertaken prior to
any construction and excavation activities.
Contd
Public Exposure to gas Leaks and Explosions

Gas utility operators should inform and advise affected
communities, schools, businesses / commercial facilities,
and residents about the potential hazards presented by gas
infrastructure.
2. Gas distribution system operators should establish an
emergency preparedness and response plan and
communicate this plan to the public as necessary.
3. Gas distribution system operators should make information
available to customers (e.g. through flyers and internetbased information) regarding the safe operation of gas
fueled appliances and equipment.
1.
Community Health and Safety
Measures to prevent and control air emissions due to

leaks include:
1. Gas pipelines and pipeline components, in addition
to general installation and pipe joining techniques
such as welding, should meet international
standards for structural integrity and operational
performance.
2. Corrosion prevention of buried ferrous metal
pipelines should be undertaken using coating or
cathodic protection techniques.
Air Emissions
3.
4.
5.
Testing of pipelines and pipeline components for pressure

specifications and presence of leaks should be undertaken prior to
commissioning. The system should be gas tight when tested at a
higher pressure than the normal maximum operation gas pressure.
Comparisons of purchased and delivered gas amounts should be
periodically examined for discrepancies and unaccounted for gas
which may be an indicator of excessive system leakage.
Regulating stations and vaults, both above and below ground,
may contain equipment (e.g. safety valves, filters) that may emit
fugitive emissions of gas. Pipelines, valves, and other component
infrastructure should be regularly maintained, and ventilation and
gas detection / alarm equipment installed in station buildings or
vaults.
Contd..
Thank
You

Technical Standards and Specifications Including Safety Standards

Uploaded by

Copyright:

Available Formats

Technical Standards and Specifications Including Safety Standards

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Technical Standards and Specifications Including Safety Standards

Uploaded by

Copyright:

Available Formats

Technical Standards and

The PNGRB Act defines technical standards and specifications

Health, Safety and Environment

Exposure to gas leaks and explosions

Occupational Health and Safety

Public Exposure to gas Leaks and Explosions

Community Health and Safety

Measures to prevent and control air emissions due to

Testing of pipelines and pipeline components for pressure

You might also like