Introduction To Nondestructive Testing

Introduction to Nondestructive
Testing
Six Most Common NDT

Methods
Visual
Liquid Penetrant
Magnetic
Ultrasonic
Eddy Current
X-ray
Outline
Introduction to NDT
Overview of Six Most
Common NDT Methods
Selected Applications
Definition of NDT
The use of noninvasive
techniques to determine
the integrity of a material,
component or structure
or
quantitatively measure
some characteristic of
an object.
i.e. Inspect or measure without doing harm.
Methods of NDT
Micr
ow
Visual
ng
i
t
s
e
Tap T
X-ray
ave
The
rmo
grap
hy
le
c
i
t
r
a
P
c
i
t
e
Magn
Acousti
c Micros
copy
Acous
tic Emi
ts
n
t
e
n
ssion
a
m
r
t
e
ne
ur
e
s
P
a
id
e
u
q
M
i
L
ic
t
e
Ult
n
g
a
ras
M
Replication
on
ic
Lase
Eddy
r Inte
Curr
rfero
e
g
a
k
ent
a
metr
Flux Le
y
What are Some Uses

of NDE Methods?
Flaw Detection and Evaluation
Leak Detection
Location Determination
Dimensional Measurements
Fluorescent penetrant indication
Structure and Microstructure Characterization

Estimation of Mechanical and Physical Properties
Stress (Strain) and Dynamic Response Measurements
Material Sorting and Chemical Composition
Determination
Common Application of NDT

Inspection of Raw Products
Inspection Following Secondary
Processing
In-Services Damage Inspection
Inspection of Raw Products

Forgings,
Castings,
Extrusions,
etc.
Inspection Following
Secondary Processing
Machining
Welding
Grinding
Heat treating
Plating
etc.
Inspection For
In-Service Damage
Cracking
Corrosion
Erosion/Wear
Heat Damage
etc.
When are NDE Methods Used?

There are NDE application at almost any stage
in the production or life cycle of a component.
To assist in product development
To screen or sort incoming materials
To monitor, improve or control
manufacturing processes
To verify proper processing such as heat
treating
To verify proper assembly
To inspect for in-service damage
Visual Inspection
Most basic and common
inspection method.
Tools include
fiberscopes,
borescopes, magnifying
glasses and mirrors.
Portable video inspection
unit with zoom allows
inspection of large tanks
and vessels, railroad tank
cars, sewer lines.
Robotic crawlers permit
observation in hazardous or
tight areas, such as air
ducts, reactors, pipelines.
Liquid Penetrant Inspection

A liquid with high surface wetting characteristics
is applied to the surface of the part and allowed
time to seep into surface breaking defects.
The excess liquid is removed from the surface
of the part.
A developer (powder) is applied to pull the
trapped penetrant out the defect and spread it
on the surface where it can be seen.
Visual inspection is the final step in the
process. The penetrant used is often loaded
with a fluorescent dye and the inspection is
done under UV light to increase test
sensitivity.
Basic Process of PT
1) Clean & Dry Component
4) Apply Developer
2) Apply Penetrant
5) Visual Inspection
3) Remove Excess
6) Post Clean Component
Magnetic Particle Inspection

The part is magnetized. Finely milled iron particles coated with a dye
pigment are then applied to the specimen. These particles are attracted to
magnetic flux leakage fields and will cluster to form an indication directly
over the discontinuity. This indication can be visually detected under
proper lighting conditions.
Magnetic Particle Crack Indications
Radiography
The radiation used in radiography
testing is a higher energy (shorter
wavelength) version of the
electromagnetic waves that we
see as visible light. The radiation can
come from an X-ray generator or a
radioactive source.
High Electrical Potential

Electrons
+
X-ray Generator
or Radioactive
Source Creates
Radiation
Radiation
Penetrate
the Sample
Exposure Recording Device
Film Radiography
The part is placed between the
radiation source and a piece of film.
The part will stop some of the
radiation. Thicker and more dense
area will stop more of the radiation.
X-ray film
The film darkness

(density) will vary with
the amount of radiation
reaching the film
through the test object.
= less exposure
= more exposure
Top view of developed film
Radiographic Images
Eddy Current Testing
Coil
Coil's
magnetic field
Eddy current's
magnetic field
Eddy
currents
Conductive
material
Eddy Current Testing

Eddy current testing is particularly well suited for detecting
surface cracks but can also be used to make electrical conductivity
and coating thickness measurements. Here a small surface probe
is scanned over the part surface in an attempt to detect a crack.
Ultrasonic Inspection (Pulse-Echo)

High frequency sound waves are introduced into a
material and they are reflected back from surfaces or
flaws.
Reflected sound energy is displayed versus time, and
f
inspector can visualize a cross section of the specimen
showing the depth of features that reflect sound.
initial
pulse
crack
echo
back surface
echo
crack
0
Oscilloscope, or flaw
detector screen
10
plate
Ultrasonic Imaging
High resolution images can be produced by plotting
signal strength or time-of-flight using a computercontrolled scanning system.
Gray scale image produced using

the sound reflected from the front
surface of the coin
Gray scale image produced using the

sound reflected from the back surface
of the coin (inspected from heads side)
Power Plant Inspection

Periodically, power plants are
shutdown for inspection.
Inspectors feed eddy current
probes into heat exchanger
tubes to check for corrosion
damage.
Pipe with damage
Probe
Signals
produced by
various amounts
of corrosion
thinning.
Wire Rope Inspection

Electromagnetic devices
and visual inspections are
used to find broken wires
and other damage to the
wire rope that is used in
chairlifts, cranes and other
lifting devices.
Storage Tank Inspection

Robotic crawlers
use ultrasound to
inspect the walls of
large above ground
tanks for signs of
thinning due to
corrosion.
Cameras on
long
articulating
arms are used
to inspect
underground
storage tanks
for damage.
Pressure Vessel Inspection

The failure of a pressure vessel
can result in the rapid release of
a large amount of energy. To
protect against this dangerous
event, the tanks are inspected
using radiography and
ultrasonic testing.
Pipeline Inspection
NDT is used to inspect pipelines
to prevent leaks that could
damage the environment. Visual
inspection, radiography and
electromagnetic testing are some
of the NDT methods used.
Remote visual inspection using

a robotic crawler.
Magnetic flux leakage inspection.

This device, known as a pig, is
placed in the pipeline and collects
data on the condition of the pipe as it
is pushed along by whatever is being
transported.
Radiography of weld joints.

Introduction To Nondestructive Testing

Uploaded by

Copyright:

Available Formats

Introduction To Nondestructive Testing

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Introduction To Nondestructive Testing

Uploaded by

Copyright:

Available Formats

Introduction to Nondestructive

Six Most Common NDT

What are Some Uses

Fluorescent penetrant indication

Structure and Microstructure Characterization

Common Application of NDT

Inspection of Raw Products

When are NDE Methods Used?

Liquid Penetrant Inspection

6) Post Clean Component

Magnetic Particle Inspection

Magnetic Particle Crack Indications

High Electrical Potential

The film darkness

Top view of developed film

Eddy Current Testing

Eddy Current Testing

Ultrasonic Inspection (Pulse-Echo)

Gray scale image produced using

Gray scale image produced using the

Power Plant Inspection

Pipe with damage

Wire Rope Inspection

Storage Tank Inspection

Pressure Vessel Inspection

Remote visual inspection using

Magnetic flux leakage inspection.

Radiography of weld joints.

You might also like