Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
132 views

Module 3a - Welding Processes

This document discusses various welding processes. It describes fusion welding processes like arc welding which use heat to melt materials together. Arc welding can use consumable electrodes that act as filler material or non-consumable electrodes with added filler. Processes also differ in how they provide shielding from oxidation during welding through gases or flux coatings. The document outlines common welding techniques like gas metal arc welding, shielded metal arc welding, and oxy-fuel welding.

Uploaded by

Mayur Patel
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
132 views

Module 3a - Welding Processes

This document discusses various welding processes. It describes fusion welding processes like arc welding which use heat to melt materials together. Arc welding can use consumable electrodes that act as filler material or non-consumable electrodes with added filler. Processes also differ in how they provide shielding from oxidation during welding through gases or flux coatings. The document outlines common welding techniques like gas metal arc welding, shielded metal arc welding, and oxy-fuel welding.

Uploaded by

Mayur Patel
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 36

ME 330

Manufacturing Processes
WELDING PROCESSES

Overview of processes

Principle of the process

Structure and configuration

Process modeling

Defects

Design For Manufacturing (DFM)

Process variation

Welding
1. Process in which two (or more) parts are coalesced at
their contacting surfaces by application of:

Heat and pressure


2. Some welding processes use a filler material added to
facilitate coalescence

Principle of welding

Assembly two parts together by creating a fusion and/or


deformation in the interaction area, which is further based on
the physics laws such as fusion and solid state deformation.

Principle of welding

Fusion welding (FW)

Heat materials to melt the materials of


compositions and
melting points. Due to the high-temperature phase
transitions inherent to these processes, a heat-affected zone
is created in the material

Principle of welding

Solid State welding (SSW)

On the interface between two materials there is no melting


that happens but the interface of materials is reconfigured to
form many
structure.

Two Categories of Welding Processes


1. Fusion welding - coalescence is accomplished by melting
the two parts to be joined, in some cases adding filler
metal to the joint
Examples: arc welding, oxyfuel gas welding, resistance
spot welding
2. Solid state welding - heat and/or pressure are used to
achieve coalescence, but no melting of base metals
occurs and no filler metal is added
Examples: forge welding, diffusion welding, friction
welding

The general function of welding


1. Provides a permanent joint
2. One of the most economical ways to join parts in terms
of material usage and fabrication costs
Mechanical fastening usually requires additional hardware
(e.g., screws) and geometric alterations of the assembled
parts (e.g., holes)
3. Not restricted to a factory environment
Welding can be accomplished "in the field"

Limitations and Drawbacks of Welding


1. Most welding operations are performed manually and
are expensive in terms of labor cost.
2. Most welding processes utilize high energy and are
inherently dangerous.
3. Welded joints do not allow for convenient disassembly.
4. Welded joints can have quality defects that are difficult to
detect.

Welding

Fusion Welding (FW)


Solid State Welding (SSW)
Arc Welding (AW)

Principle of the process

Structure and configuration

Process modeling

Defects

Design For Manufacturing (DFM)

Process variation

Fusion Welding: Arc Welding (AW)


A fusion welding process in which coalescence of the metals
is achieved by the heat from an electric arc between an
electrode and the work
1.Electric energy from the arc produces temperatures ~
10,000 F (5500 C), hot enough to melt any metal.
2.Most AW processes add filler metal to increase volume
and strength of weld joint.

Fusion Welding: Arc Welding (AW)


A pool of molten metal is formed near electrode tip, and as
electrode is moved along joint, molten weld pool solidifies in
its wake

Welding

Fusion Welding (FW)


Solid State Welding (SSW)
Arc Welding (AW)

Consumable electrodes

Non-consumable electrodes

Two Basic Types of Arc Welding (Based on


Electrodes)
1. Consumable electrodes
consumed during welding process
added to weld joint as filler metal
in the form of rods or spools of wire
2. Non-consumable electrodes
not consumed during welding process but does get
gradually eroded
filler metal must be added separately if it is added

Arc welding (AW): Arc Shielding


1. At high temperatures in AW, metals are chemically
reactive to oxygen, nitrogen, and hydrogen in air
Mechanical properties of joint can be degraded by
these reactions
Arc must be shielded from surrounding air in AW
processes to prevent reaction
2. Arc shielding is accomplished by
Shielding gases, e.g., argon, helium, CO2
Flux

Arc welding (AW): Flux


A substance that prevents formation of oxides and other
contaminants in welding, which comes from
1. granules that are created from the welded material.
2. a coating on the stick electrode that melts during
welding to cover operation.
3. a core that is within tubular electrodes and is released
as electrode is consumed.
Melts during welding to be liquid slag that hardens when
cooled. The slag should be removed for a clean look by
brushing or grinding off.

Consumable Electrode AW Processes


Shielded Metal Arc Welding (or Stick Welding)
Gas Metal Arc Welding (or Metal Inert Gas Welding)
FluxCored Arc Welding
Electro-gas Welding
Submerged Arc Welding

AW: Consumable: Shielded Metal Arc Welding


(SMAW)

Uses a consumable electrode consisting of a filler metal rod and


coating around rod.
Coating composed of chemicals that provide flux and shielding.
Low cost welding system: Power supply, connecting cables, and
electrode holder available for $300 to $400.

SMAW Applications
Used for steels, stainless steels, cast irons, and certain
nonferrous alloys.
Not used or rarely used for
and its alloys,
copper alloys, and titanium.
Can be used in windy weather.
Can be used on dirty metals (i.e. painted or rusted
surfaces).
Good for repair work.
Makes thick welds.

AR: Consumable: Gas Metal Arc Welding


(GMAW) or Metal Inert Gas (MIG) Welding
Uses a consumable bare metal wire as electrode with
shielding by flooding arc with a gas
1.Wire is fed continuously and automatically from a spool
through the welding gun.
2.Shielding gases include argon and helium for aluminum
welding, and CO2 for steel welding.
3.Bare electrode wire (no flux) plus shielding gases
eliminate slag on weld bead. No need for manual grinding
and cleaning of slag
4.Medium cost welding system: $1000 to $1200

Gas Metal Arc Welding

GMAW Advantages over SMAW


1. Continuous welding because of continuous wire
electrode. Sticks must be periodically changed in SMAW.
2. Higher deposition rates.
3. Eliminates problem of slag removal.
4. Can be readily automated.
5. Has better control to make cleaner & narrower welds
than SMAW.

GMAW Applications
1. Used to weld ferrous and various non-ferrous and
metals.
2. Good for fabrications such as frames and farm
equipment.
3. Can weld thicker metal (not as thick as SMAW).
4. Metal must be clean to start weld.

Non-consumable Electrode Processes


Gas Tungsten Arc Welding
Plasma Arc Welding
Carbon Arc Welding
Stud Welding

AW: non-consumable: Gas Tungsten Arc


Welding (GTAW) or Tungsten Inert Gas (TIG)
Welding
Uses a non-consumable tungsten electrode and an inert gas
for arc shielding
1.Melting point of tungsten = 3410C (6170F).
2.Used with or without a filler metal. When filler metal used,
it is added to weld pool from separate rod or wire.
3.Applications: aluminum and stainless steel mostly.
4.High cost for welding system: $4000.

Gas Tungsten Arc Welding

Filler rod

Advantages and Disadvantages of GTAW


Advantages:
1. High quality welds for suitable applications
- Welds are cleaner and narrower than MIG
2. No spatter because no filler metal through arc
3. Little or no post-weld cleaning because no flux
Disadvantages:
1. More difficult to use than MIG welding
2. More costly than MIG welding

GTAW Applications
1. Used to weld ferrous and various non-ferrous and metals.
2. Can weld various dissimilar metals together.
3. Good for fabrications such as aircraft or race car frames.
4. Used for welding thinner metal parts (not as thick as
MIG).
5. Metal must be very clean to start weld.

Welding

Fusion Welding (FW)


Solid State Welding (SSW)
Arc Welding (AW)
Oxyfuel gas welding

Oxyfuel Gas Welding (OFW)


Group of fusion welding operations by a high temperature
flame that burns various fuels mixed with oxygen
Oxyfuel gas is also used in flame cutting torches to cut and
separate metal plates and other parts
Most important OFW process is oxyacetylene welding (has
high temperatures up to 3480C)
Filler metal is sometimes added
Composition must be similar to base metal
Filler rod often coated with flux to clean surfaces and
prevent oxidation
Low cost for welding system: $400

Oxyacetylene Welding

Oxyacetylene Torch
1. Maximum temperature reached at tip of inner cone, while
outer envelope spreads out and shields work surface from
atmosphere
2. Shown below is neutral flame of oxyacetylene torch indicating
temperatures achieved

Oxyacetylene Gas Welding Applications


Suitable for low quantity production and repair jobs
Used for welding thinner parts

Welding

Summary

Fusion Welding (FW)


Solid State Welding (SSW)
Oxyfuel welding

Shielding
Flux
Non-consumable electrodes

Arc welding

Consumable electrodes

Various welding processes (AW) are developed to address


the two issues: shielding and flux

You might also like