Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 174 views

    Ceragon-Fibeair Ip-10 Technical Specs

    Uploaded by

    Cesar Santiago Bolaño Salazar
    1. The document provides instructions for commissioning an IDU, including logging in, configuring system parameters and time settings, disabling features like XPIC and PLA, configuring ports, VLANs, and the radio link. 2. Steps include opening and enabling ports, setting port VLANs and types, adding and deleting VLANs, configuring the NMS port, setting the radio link frequency and power levels, and muting the TX port temporarily. 3. Once the radio link has been established and meets the design RSL levels, transmission tests are run on the 3G/2G and NMS ports by connecting them to the PC and pinging gateway IPs, before performing the MW SWAP

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Ceragon-Fibeair Ip-10 Technical Specs

    Uploaded by

    Cesar Santiago Bolaño Salazar
    174 views30 pages
    1. The document provides instructions for commissioning an IDU, including logging in, configuring system parameters and time settings, disabling features like XPIC and PLA, configuring ports, VLANs, and the radio link. 2. Steps include opening and enabling ports, setting port VLANs and types, adding and deleting VLANs, configuring the NMS port, setting the radio link frequency and power levels, and muting the TX port temporarily. 3. Once the radio link has been established and meets the design RSL levels, transmission tests are run on the 3G/2G and NMS ports by connecting them to the PC and pinging gateway IPs, before performing the MW SWAP

    Original Description:

    zte

    Original Title

    Ceragon-fibeair Ip-10 Technical Specs

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides instructions for commissioning an IDU, including logging in, configuring system parameters and time settings, disabling features like XPIC and PLA, configuring ports, VLANs, and the radio link. 2. Steps include opening and enabling ports, setting port VLANs and types, adding and deleting VLANs, configuring the NMS port, setting the radio link frequency and power levels, and muting the TX port temporarily. 3. Once the radio link has been established and meets the design RSL levels, transmission tests are run on the 3G/2G and NMS ports by connecting them to the PC and pinging gateway IPs, before performing the MW SWAP

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    174 views30 pages

    Ceragon-Fibeair Ip-10 Technical Specs

    Uploaded by

    Cesar Santiago Bolaño Salazar
    1. The document provides instructions for commissioning an IDU, including logging in, configuring system parameters and time settings, disabling features like XPIC and PLA, configuring ports, VLANs, and the radio link. 2. Steps include opening and enabling ports, setting port VLANs and types, adding and deleting VLANs, configuring the NMS port, setting the radio link frequency and power levels, and muting the TX port temporarily. 3. Once the radio link has been established and meets the design RSL levels, transmission tests are run on the 3G/2G and NMS ports by connecting them to the PC and pinging gateway IPs, before performing the MW SWAP

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 30

    1.

    1 Login to IDU
    Setting PC as following IP, can not use
    192.168.1.16,this IP is IDU IP.
    1.2 Login to IDU
    Connect cable from PC to IDU LMT port
    1.3 Login to IDU
    Input 192.168.1.16 in IE browser, user name and password all
    is admin
    2.1 System Parmeter
    Setting NE name and IP information according to the design
    Path：Setup->System->Parameter,Apply after setting
    2.2 System Time
    Bogota,Lima,Quito zone
    Path：Setup->System->Time,Apply after setting
    2.3 SNTP management
    All IDU setting the same as following,10.221.175.1 is the MW server
    IP. Path：Setup->System->Time,Apply after setting.
    2.4 NMS
    Management VLAN and bandwidth,setting VLAN accroding to
    desgin,bandwidth use 2M. Path：Setup->System->NMS,Apply after setting.
    3.Disable XPIC
    Disable XPIC,Path：Radio Link->XPIC,Apply after setting.
    4.Delete PLA
    Delete PLA,Path：Radio Link->PLA,Apply after delete.
    5.1 Port open or close
    Double-click the port, follow the prompts to select Apply or Cancel, open the
    ports need to be used and close the ports no need to be used Path：
    Home,Apply after setting
    5.2 Port enable
    Enable the opend ports.Path：ETH->Port Related->Port
    Configration,Apply after setting.
    6.1 Port VLAN configuration
    Setting port vlan according to the design.Path：ETH->VLAN-
    >Port Info Configration.
    6.2 Port Type configuration
    Port connect to BBU or IDU or SDH or ALU router use Trunk type,port
    connect to PC use access type.Path：ETH->VLAN->Port Info
    Configration,Apply after setting.
    6.3 Add Port VLAN
    Add the VLAN according to the design,Path：ETH->VLAN->Port Info
    Configration
    6.4 Delete Port VLAN
    Delete the no used VLAN,Path：ETH->VLAN->Port Info Configration
    6.5 PVID setting
    Setting PVID,PVID can only use number of VLAN ID Region,Path：
    ETH->VLAN->Port Info Configration,Apply after setting
    6.6 NMS port configuration
    Commissioning NMS port as Access mode and setting the NMS VLAN as PVID,add
    any no used IP to PC(check from IP design document),so NMS port can be used for
    remote login.
    7.1 Radio Link setting
    Basic Configuration of Radio Link,select transmiision unit,setting link
    name.Paht：Radion Link->Basic Configuration,Apply after setting
    7.2 Mute TX
    Mute TX for 60 mins,so will not affect the exist link,need to mute again
    if not finished commissioning in 60 mins.Paht：Maintenance->Radio
    port,Apply after setting
    7.3 Work mode configuration
    Bandwidth and Modulation mode must be the same for two sites of one
    link according to the design.Bandwidth change to 7M to find temporary
    frequency. Paht：Radio Link->Basic Configuration,Apply after setting
    7.4 Work mode configuration
    Disable RDI/ATPC/ACM for commissioning. Paht：Radio Link->Basic
    Configuration,Apply after setting
    7.5 Work mode configuration
    T/R Spacing select Other,setting TX Power as design,setting TX
    Frequency and RX Frequency as design. Paht：Radio Link->Basic
    Configuration,Apply after setting
    7.6 Search temporary frequency
    If the current RSL is too low, adjustment the antenna untill can receive the remote
    old antena signal(one site search the temporary frequency,no need both site
    search ). Paht：Radio Link->Basic Configuration,Apply after setting
    7.7 Search temporary frequency
    If can receive the remote old antena signal(RSL is not too low),change T/R spacing to Other, plus
    or decrease 7 or 14 or other for TX Frequency and RX Frequency at the same time, if RSL change
    to too low, means this frequency can use for temporary, tell to remote site engineer to use this
    frequency to commissioning. Paht：Radio Link->Basic Configuration,Apply after setting
    Notice:use TX Frequency 7187.5 for example,7187.5 setting in the IDU is 7187500,add 7 the
    frequency is 7194500,is not 7187507
    7.8 RSL meet the design
    Adjustment antenna untill RSL meet the design requirements (not more than 3dB
    more or less than the design)
    7.9 Relation between RSL and output voltage @ RSSI interface
    Tower engineer use Voltmeter to test from ODU RSSI interface

    2.1
    2
    1.9
    1.8
    1.7
    RSSI (V)

    1.6
    1.5
    1.4 RSSI (V)
    1.3
    1.2
    1.1
    1
    -100 -90 -80 -70 -60 -50 -40 -30 -20
    RSL (dBm)
    8.1 3G/2G Transmission test
    Commissioming free port as Access mode and use 3G/2G VLAN as PVID,add 3G/2G
    IP to PC, then connect cable to the test port and ping 3G/2G Gateway IP, if ping successful, can
    do the SWAP operation
    8.2 NMS Transmission test
    Commissioming NMS port as Access mode and use NMS VLAN as PVID, then connect
    cable to the test port and ping NMS Gateway IP, if ping successful,means the link can be
    management in BOC.
    8.3 Neighbor NE check
    1.Connect cable to NMS port;
    2.Check the remote site IP information;
    Paht：Radio Link->Neighbor NE
    9 MW SWAP
    1.Turn off the old MW;
    2.Change the new IDU frequency to design frequency;
    3.Change the work mode as design, both site IDU work mode must be the same all the time;
    4.Connect the BBU traffic cable to new IDU traffic port and check the SWAP result;
    5.Remove the old MW equipment if SWAP successful.

    You might also like