CHAP 1 - Semiconductor Material-PA

Chapter 1
SEMICONDUCTOR
MATERIALS
BY:
ZAID AIHSAN
ELECTRONIC 1
CONTENT
1.1 Atomic structure

1.2 Semiconductor, conductors and insulators
1.3 Covalent bonding
1.4 Conduction in semiconductors
1.5 N-type and P-type semiconductors
1.6 The diode
1.7 Biasing the diode
1.8 Voltage-current characteristic of a diode
1.9 Diode models
1.10 Testing a diode
WHAT IS ELECTRONIC
DEVICES??
 Such as diodes, transistors, and

integrated circuits (ICs).
 Made of a semiconductive material.
To understand how these devices work, we should have a basic
knowledge of the atoms structure and the interaction of atom
particles !!
History Of Semiconductor Devices
 Atom is the smallest particle of an element contain 3 basic
particles:
ATOM
Electrons
Protons (negative charge)
(positive charge)
Nucleus
(core of atom)
Neutrons
(uncharged)
This model was
Proposed by Niels
Bohr in 1915
Electrons circle
the nucleus that
consists of
protons and
neutrons.
Figure 1.1 : Bohr model of an atom
ATOMIC STRUCTURE (cont..)

Atomic
number
Electron shells
Valence electron
ATOM & orbit
Ionization

Atomic Number
 Atomic no. = No. of protons in nucleus
 Element in periodic table are arranged according to atomic no.
Electron Shells and Orbits
 Electrons near the nucleus have less energy than those in more distant
orbits.
 Each distance (orbits) from the nucleus corresponding to a certain
energy level.
 In an atom, the orbits are group into energy bands – shells
 The maximum number of electrons (Ne) in each shell is calculated
using formula below:
N e 2n 2 n = number of shell

 Example for 2nd shell:
N  2n  2(2)  8
e
2 2

INSULATORS, CONDUCTORS & SEMICONDUCTORS (cont..)
Energy increases as the distance
from the nucleus increases
Valence Electrons
 Electrons with the highest energy levels exist in the outermost
shell and loosely bound to the atom. The outermost shell – valence
shell.
 Electron in the valence shell called valence electrons.
Ionization
 When atoms absorb energy (e.g heat source), the energies of electron
are raised .
 Valence electron can easily jump to higher orbits.
 If acquires a sufficient energy, it can escape from outer shell and atom’s
influence.
 Losing valence electrons called ionization – positive ion.
 Escape electron called free electron.

 Atom can be represented by the valence shell and a core.
 A core consists of all the inner shell and the nucleus.
Carbon atom:
valence shell – 4 e
inner shell – 2 e
+6 for the nucleus
and -2 for the two
Nucleus: inner-shell electrons
6 protons (net charge +4)
6 neutrons
Insulators
 material does not conduct electrical current
 valence electron are tightly bound to the atom – very few free electron
Conductors
 material that easily conducts electrical current.
 The best conductors are single-element material (e.g copper, silver,
gold, aluminum)
 Only one valence electron very loosely bound to the atom- free electron
Semiconductors
 material between conductors and insulators in its ability to conduct
electric current
 in its pure (intrinsic) state is neither a good conductor nor a good
insulator
 most common semiconductor- silicon(Si), germanium(Ge), and
carbon(C) which contains four valence electrons.

Energy Bands

Energy Bands
 Energy gap-difference in energy between the valence band and

conduction band.
 Band-another name for an orbital shell (valence shell=valence band)
 Conduction band –the band outside the valence shell where it has free
electrons.
Comparison between a Semiconductor Atom &
Conductor Atom
A Silicon atom: A Copper atom:
• 4 valence electrons • Only 1 valence electron
• A semiconductor • A good conductor
• Electron conf.: 2:8:4 • Electron conf.:2:8:18:1
14 protons 29 protons
14 nucleus 29 nucleus
10 electrons 28 electrons
in inner shell in inner shell

Covalent bonding – holding atoms together by sharing
valence electrons
Sharing of valence To form Si crystal
electron produce the
covalent bond
Result of the bonding:
 The atom are held together forming a solid substrate.
 The atoms are all electrically stable, because their valence shells are
complete.
 The complete valence shells cause the silicon to act as an insulator-
intrinsic (pure) silicon.
 In other word, it is a very poor conductor.
• Covalent bonding in an
intrinsic or pure silicon crystal.
An intrinsic crystal has no
impurities.
Covalent bonds in a 3-D silicon crystal
COVALENT BONDING (cont..)

Figure 1-10 Energy band diagram for a pure (intrinsic) silicon crystal
with unexcited (no external energy such as heat) atoms. There are no
electrons in the conduction band. This condition occurs only at a
temperature of absolute 0 Kelvin.
Conduction Electrons and Holes
Absorbs enough energy
(thermal energy)
to jumps
a free electron and

its matching valence
Recombination-when a conduction electron
band hole –
loses energy and fall back into hole in
electron-hole pair
valence band
Figure 1-11 Creation of electron-hole pairs in a silicon crystal. Electrons in the

conduction band are free (also called conduction electrons)
CONDUCTION IN SEMICONDUCTOR (cont..)
Conduction Electrons and Holes
Figure 1-12 Electron-hole pairs in a silicon crystal. Free electrons are being
generated continuously while some recombine with holes.

Electrons and Holes current
Electron current
free
electrons
Apply voltage
When a voltage is applied, free electrons are free to move randomly
and attracted toward +ve end. The movement of electrons is one type of
current in semiconductor and is called electron current.
Figure 1-13 Electron current in intrinsic silicon is produced by the movement of
thermally generated free electrons.
Electrons and Holes Current
movement
of holes
Figure 1-14 Hole current in intrinsic silicon.

Doping
 The process of creating N and P type materials
 By adding impurity atoms to intrinsic Si or Ge to improve the
conductivity of the semiconductor
 Two types of doping – trivalent (3 valence e-) & pentavalent (5
valence e-)
p-type material – a semiconductor that has added
trivalent impurities
n-type material – a semiconductor that has added
pentavalent impurities
Trivalent Impurities:
 Aluminum (Al)
 Gallium (Ga)
 Boron (B)
 Indium (In)
Pentavalent Impurites:
 Phosphorus (P)
 Arsenic (As)
 Antimony (Sb)
 Bismuth (Bi)
N-TYPE & P-TYPE SEMICONDUCTORS (cont..)

Si = 14 ( 2.8.4)
Sb = 51 ( 2.8.18.18.5)
B= 5 (2.3)
N-type semiconductor
 Pentavalent impurities are added to Si or Ge, the result is an increase of
free electrons
 1 extra electrons becomes a conduction electrons because it is not
attached to any atom
 No. of conduction electrons can be controlled by the no. of impurity
atoms
 Pentavalent atom gives up an electron - call a donor atom
 Current carries in n-type are electrons – majority carriers
 Holes – minority carriers (holes created in Si when electron- hole pairs
are thermally generated.
Sb
impurity Pentavalent
atom impurity atom
in a Si crystal

P-type semiconductor
 Trivalent impurities are added to Si or Ge to increase number of holes.
 Boron, indium and gallium have 3 valence e- form covalent bond with 4
adjacent silicon atom. A hole created when each trivalent atom is added.
 The no. of holes can be controlled by the no. of trivalent impurity atoms
 The trivalent atom can take an electron- acceptor atom
 Current carries in p-type are holes – majority carries
electrons – minority carries (created during electron-holes pairs
generation).
B
impurity
atom
Trivalent impurity
atom in a Si crystal

The valence Shell
 1e-perfect Conductor (<4e)

( Easy to drift @ move to other atom)
 8e- Insulator
 4e- Semiconductor
Checkup Questions
1) Describe an atom.
2) What is a valence electron?
3) How are ions formed?
4) What is the difference between conductors and insulators?
5) Why does a semiconductor have fewer free electrons than a
conductor?
6) What is a crystal?
7) How a covalent bonds formed?
8) Which electrons are responsible for electron current in silicon?
9) What is a hole?
10) How is an n-type and a p-type material formed?
11) What is the difference between intrinsic and extrinsic
semiconductors?

CHAP 1 - Semiconductor Material-PA

Uploaded by

Copyright:

Available Formats

CHAP 1 - Semiconductor Material-PA

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CHAP 1 - Semiconductor Material-PA

Uploaded by

Copyright:

Available Formats

Chapter 1

1.1 Atomic structure

 Such as diodes, transistors, and

Figure 1.1 : Bohr model of an atom

ATOMIC STRUCTURE (cont..)

ATOMIC STRUCTURE (cont..)

N e 2n 2 n = number of shell

ATOMIC STRUCTURE (cont..)

ATOMIC STRUCTURE (cont..)

INSULATORS, CONDUCTORS & SEMICONDUCTORS (cont..)

INSULATORS, CONDUCTORS & SEMICONDUCTORS (cont..)

 Energy gap-difference in energy between the valence band and

INSULATORS, CONDUCTORS & SEMICONDUCTORS (cont..)

Covalent bonds in a 3-D silicon crystal

COVALENT BONDING (cont..)

a free electron and

Figure 1-11 Creation of electron-hole pairs in a silicon crystal. Electrons in the

CONDUCTION IN SEMICONDUCTOR (cont..)

Figure 1-14 Hole current in intrinsic silicon.

CONDUCTION IN SEMICONDUCTOR (cont..)

N-TYPE & P-TYPE SEMICONDUCTORS (cont..)

N-TYPE & P-TYPE SEMICONDUCTORS (cont..)

N-TYPE & P-TYPE SEMICONDUCTORS (cont..)

 1e-perfect Conductor (<4e)

You might also like