The document contains the input parameters and results of a finite element analysis simulation with the following details:
- The simulation analyzed a 4-layer linear elastic system under a single concentrated load case with 8 points of interest through the thickness.
- The results show the displacements, stresses, and strains at each point of interest for a contact pressure of 800 kPa applied at the surface.
- Peak stresses occurred at the top layer/contact interface with compressive tangential and radial stresses of around 1500 kPa while strains remained small at around 1%. Deeper points showed decreasing stresses and strains through the thickness.
The document contains the input parameters and results of a finite element analysis simulation with the following details:
- The simulation analyzed a 4-layer linear elastic system under a single concentrated load case with 8 points of interest through the thickness.
- The results show the displacements, stresses, and strains at each point of interest for a contact pressure of 800 kPa applied at the surface.
- Peak stresses occurred at the top layer/contact interface with compressive tangential and radial stresses of around 1500 kPa while strains remained small at around 1%. Deeper points showed decreasing stresses and strains through the thickness.
The document contains the input parameters and results of a finite element analysis simulation with the following details:
- The simulation analyzed a 4-layer linear elastic system under a single concentrated load case with 8 points of interest through the thickness.
- The results show the displacements, stresses, and strains at each point of interest for a contact pressure of 800 kPa applied at the surface.
- Peak stresses occurred at the top layer/contact interface with compressive tangential and radial stresses of around 1500 kPa while strains remained small at around 1%. Deeper points showed decreasing stresses and strains through the thickness.
The document contains the input parameters and results of a finite element analysis simulation with the following details:
- The simulation analyzed a 4-layer linear elastic system under a single concentrated load case with 8 points of interest through the thickness.
- The results show the displacements, stresses, and strains at each point of interest for a contact pressure of 800 kPa applied at the surface.
- Peak stresses occurred at the top layer/contact interface with compressive tangential and radial stresses of around 1500 kPa while strains remained small at around 1%. Deeper points showed decreasing stresses and strains through the thickness.
Download as TXT, PDF, TXT or read online from Scribd
Download as txt, pdf, or txt
You are on page 1/ 1
INPUT FILE NAME -C:\KENPAVE\Trial Question.
DAT
NUMBER OF PROBLEMS TO BE SOLVED = 1
TITLE -Trial Question
MATL = 1 FOR LINEAR ELASTIC LAYERED SYSTEM
NDAMA = 0, SO DAMAGE ANALYSIS WILL NOT BE PERFORMED NUMBER OF PERIODS PER YEAR (NPY) = 1 NUMBER OF LOAD GROUPS (NLG) = 1 TOLERANCE FOR INTEGRATION (DEL) -- = 0.001 NUMBER OF LAYERS (NL)------------- = 4 NUMBER OF Z COORDINATES (NZ)------ = 8 LIMIT OF INTEGRATION CYCLES (ICL)- = 80 COMPUTING CODE (NSTD)------------- = 9 SYSTEM OF UNITS (NUNIT)------------= 1
Length and displacement in cm, stress and modulus in kPa
unit weight in kN/m^3, and temperature in C
THICKNESSES OF LAYERS (TH) ARE : 5 8 20
POISSON'S RATIOS OF LAYERS (PR) ARE : 0.35 0.35 0.35 0.35 VERTICAL COORDINATES OF POINTS (ZC) ARE: 2 4 6 10 15 20 25 30 ALL INTERFACES ARE FULLY BONDED
FOR PERIOD NO. 1 LAYER NO. AND MODULUS ARE : 1 7.000E+06 2 4.000E+06 3 4.000E+05 4 1.000E+05
LOAD GROUP NO. 1 HAS 1 CONTACT AREA
CONTACT RADIUS (CR)--------------- = 14.1 CONTACT PRESSURE (CP)------------- = 800 RADIAL COORDINATES OF 1 POINT(S) (RC) ARE : 0
