Dr. Rajendra Gode Institute of Technology & Research: "Automatic Pothole Detection While Driving"

Dr.
Rajendra Gode Institute of

Technology & Research
A
PRESENTATION
ON
“AUTOMATIC POTHOLE
DETECTION WHILE DRIVING”
PRESENTED BY :
MR. NIKETAN A. BANARASE
GUIDED BY :
DR.R.M.DESHMUKH
CONTENT
1. INTRODUCTION
2. BLOCK DIAGRAM
3. FLOWCHART
4. MAIN COMPONENTS
5. ADVANTAGES
6. REFERENCES
INTRODUCTION
 Roads indirectly contribute to the economic growth of the
country
 Roads are normally placed with speed breakers that are used
to control the speed of the vehicle.
 Likewise, potholes are formed due to
oil spills
heavy rains
movement of heavy vehicles.
 we have proposed a system that would notify the drivers
regarding any hurdles such as potholes and humps and this
information can be used by the Government to correct these
roads effectively.
BLOCK DIAGRAM
METHODOLOGY
 The ultrasonic sensor is used for measuring the depth of a

pothole and height of a hump.
 The data obtained from ultrasonic sensor is displayed on the

LCD display and sent to the Wi-Fi module.
 The Wi-Fi module transmits the data to the server or device

to maintain the database of potholes and humps.
 The GPS receiver obtains the location co-ordinates of the

detected pothole or humps and then transmits them to the
microcontroller which then can be eventually displayed on
the LCD display.
FLOWCHART
REQUIRED COMPONENTS
 Power Supply
 Arduino Uno
 IOT Module
 Ultrasonic Sensor
 LCD Display
 GPS Receiver
 Buzzer
POWER SUPPLY
 Transformer 12v, 1amp.
 Diode 1N4007
 Capacitor 1000 micro Farad 25v
 Voltage regulator 7805
POWER SUPPLY CIRCUIT
COMPONENT SPECIFICATION
ARDUINO-UNO
 Microcontroller
ATmega328P
 Operating Voltage : 5V
 Digital I/O Pins 14 (of
which 6 provide PWM
output) PWM
 Digital I/O Pins 6
 Analog Input Pins 6
 Flash Memory 32 KB
(ATmega328P)
IOT MODULE
 Wi-fi direct (P2P), soft-
ap
 Integrated TCP or IP
protocol stack
 Operating Temperature
Range –40°C ~ 125°C
 Communication interface
voltage: 3.3V
 Operating Current : 80
mA
 Wireless criteria: 802.11
b/g/n
ULTRASONIC SENSOR
 Power supply :5V DC
 Working current : 15mA
 Measuring angle: <15°
 Ranging distance : 2cm

– 500 cm
 Resolution : 0.3 cm
LCD
 Display Formate: 16
Character x 2 Line
 Input Data: 4-Bits or 8-Bits

interface available
 Power Supply : Single Power

Supply (5V±10%)
 Backlight (Side) : LED

(Yellow)
GPS Receiver
 LED indicator for

GPS fix or not fix
 Support 32-channel
GPS
 Up to 5 Hz update
rate
Buzzer
 Rated Voltage-6V DC
 Operating Voltage-4 to
8V DC
 Rated Current-≤30mA
 Operating Temperature--
25°C to +80°C
 Weight-2g
ADVANTAGES
 Advantage of this system is that it can detect
potholes and object in the way.
 It is user friendly and can fit on multiple vehicle.
 This system can reduce the accidents.
 Determining Traffic Intensity using server updates

for a particular pothole
FUTURE SCOPE
 The proposed system considers the presence of
potholes and humps. This can be further extended
by generating the data and gets repaired by
concerned authorities periodically.
 Also, Google maps and SATNAV can be

integrated in the future system to improve user
experience.
CONCLUSION
• it automatically detects the potholes and humps
and sends the information regarding this to the
vehicle drivers
• This system helps us to avoid dreadful potholes,

humps and to avoid any tragic accidents due to
bad road conditions.
• The information can also be used by the

Government authorities for the maintenance of
the roads.
REFERENCES
 Adand pawar, “AUTOMATIC DETECTION OF POTHOLES
AND HUMPS ON ROAD”, IJSER,volume 6,issue 5,5 may
2018,pp. 39-41
 Parag G. Kadale, “AUTOMATIC DETECTION OF POTHOLES

AND HUMPS ON ROAD” , International Education & Research
Journal [IERJ], Volume 4, Issue 4, April 2018, pp. 69-70
 Omkar Rajmane, “ROAD CONDITION DETECTION USING

ARDUINO BASED SENSING MODULE AND ANDROID
SMARTPHONE”, International Journal of Advance Engineering
and Research Development, January -2017, pp. 52-57
 Sanjay Kumar, “AUTOMATIC DETECTION AND

NOTIFICATION OF POTHOLES AND HUMPS USING IOT”,
international journal for research & development in technology,
Volume-7,Issue-6, June-17, pp. 112-116
THANK
YOU ....

Dr. Rajendra Gode Institute of Technology & Research: "Automatic Pothole Detection While Driving"

Uploaded by

Copyright:

Available Formats

Dr. Rajendra Gode Institute of Technology & Research: "Automatic Pothole Detection While Driving"

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dr. Rajendra Gode Institute of Technology & Research: "Automatic Pothole Detection While Driving"

Uploaded by

Copyright:

Available Formats

Dr.

Rajendra Gode Institute of

 The ultrasonic sensor is used for measuring the depth of a

 The data obtained from ultrasonic sensor is displayed on the

 The Wi-Fi module transmits the data to the server or device

 The GPS receiver obtains the location co-ordinates of the

 Power supply :5V DC

 Working current : 15mA

 Measuring angle: <15°

 Ranging distance : 2cm

 Input Data: 4-Bits or 8-Bits

 Power Supply : Single Power

 Backlight (Side) : LED

 LED indicator for

 It is user friendly and can fit on multiple vehicle.

 This system can reduce the accidents.

 Determining Traffic Intensity using server updates

 Also, Google maps and SATNAV can be

• This system helps us to avoid dreadful potholes,

• The information can also be used by the

 Parag G. Kadale, “AUTOMATIC DETECTION OF POTHOLES

 Omkar Rajmane, “ROAD CONDITION DETECTION USING

 Sanjay Kumar, “AUTOMATIC DETECTION AND

You might also like