One-Sample Tests of Hypothesis

Chapter 10

McGraw-Hill/Irwin Copyright © 2010 by The McGraw-Hill Companies, Inc. All rights reserved.
 GOALS

1. Define a hypothesis and hypothesis testing.

2. Describe the five-step hypothesis-testing
procedure.
3. Distinguish between a one-tailed and a two-tailed
test of hypothesis.
4. Conduct a test of hypothesis about a population
mean.
5. Conduct a test of hypothesis about a population
proportion.
6. Define Type I and Type II errors.
7. Compute the probability of a Type II error.
10-2
 Hypothesis and Hypothesis Testing

HYPOTHESIS A statement about the value of a population parameter developed for the purpose of testing.

HYPOTHESIS TESTING A procedure based on sample evidence and probability theory to determine whether
the hypothesis is a reasonable statement.

TEST STATISTIC A value, determined from sample information, used to determine whether to reject the null
hypothesis.

CRITICAL VALUE The dividing point between the region where the null hypothesis is rejected and the region
where it is not rejected.

10-3
 Important Things to Remember about H0 and H1

 H0: null hypothesis and H1: alternate hypothesis

 H0 and H1 are mutually exclusive and collectively
exhaustive
 H0 is always presumed to be true
 H1 has the burden of proof Inequality
Keywords Part of:
 A random sample (n) is used to “reject H0” Symbol
 If we conclude 'do not reject H0', this does not
necessarily mean that the null hypothesis is true, it Larger (or more) than > H1
only suggests that there is not sufficient evidence
Smaller (or less) < H1
to reject H0; rejecting the null hypothesis then,
suggests that the alternative hypothesis may be No more than  H0
true.
 Equality is always part of H0 (e.g. “=” , “≥” , “≤”). At least ≥ H0
 “≠” “<” and “>” always part of H1 Has increased > H1
 In actual practice, the status quo is set up as H0
Is there difference? ≠ H1
 If the claim is “boastful” the claim is set up as H1
(we apply the Missouri rule – “show me”). Has not changed = H0
Remember, H1 has the burden of proof
Has “improved”, “is better See left H1
 In problem solving, look for key words and convert
than”. “is more effective” text
them into symbols. Some key words include:
“improved, better than, as effective as, different
from, has changed, etc.”

10-4
 Hypothesis Setups for Testing a Mean () or
a Proportion ()

MEAN

PROPORTION

10-5
 Testing for a Population Mean with a
Known Population Standard Deviation- Example

EXAMPLE Step 4: Formulate the decision rule.

Jamestown Steel Company manufactures and Reject H0 if |Z| > Z/2
assembles desks and other office equipment . The
weekly production of the Model A325 desk at the Z  Z / 2
Fredonia Plant follows the normal probability
distribution with a mean of 200 and a standard X 
 Z / 2
deviation of 16. Recently, new production methods / n
have been introduced and new employees hired.
The VP of manufacturing would like to investigate 203.5  200
whether there has been a change in the weekly  Z .01/ 2
production of the Model A325 desk. 16 / 50
1.55 is not  2.58
Step 1: State the null hypothesis and the
alternate hypothesis.
H0:  = 200
H1:  ≠ 200
(note: keyword in the problem “has
changed”)

Step 5: Make a decision and interpret the result.

Step 2: Select the level of significance. Because 1.55 does not fall in the rejection region, H0 is not
α = 0.01 as stated in the problem rejected. We conclude that the population mean is not
different from 200. So we would report to the vice president
Step 3: Select the test statistic. of manufacturing that the sample evidence does not show
that the production rate at the plant has changed from 200
Use Z-distribution since σ is known
per week.
10-6
 Testing for a Population Mean with a Known
Population Standard Deviation- Another Example

Suppose in the previous problem the vice

president wants to know whether there has Step 4: Formulate the decision rule.
been an increase in the number of units Reject H0 if Z > Z
assembled. To put it another way, can we
conclude, because of the improved Step 5: Make a decision and interpret the result.
production methods, that the mean number Because 1.55 does not fall in the rejection region, H0
of desks assembled in the last 50 weeks was is not rejected. We conclude that the average
more than 200? number of desks assembled in the last 50 weeks is
Recall: σ=16, n=200, α=.01 not more than 200

Step 1: State the null hypothesis and the

alternate hypothesis.
H0:  ≤ 200
H1:  > 200
(note: keyword in the problem “an increase”)

Step 2: Select the level of significance.

α = 0.01 as stated in the problem

Step 3: Select the test statistic.

Use Z-distribution since σ is known

10-7
 Type of Errors and p-value in Hypothesis
Testing

 Type I Error -
EAMPLE p-Value
– Defined as the probability of rejecting
the null hypothesis when it is actually Recall the last problem where the hypothesis and
true. decision rules were set up as:
– This is denoted by the Greek letter “” H0:  ≤ 200
– Also known as the significance level H1:  > 200
of a test Reject H0 if Z > Z
where Z = 1.55 and Z =2.33
 Type II Error:
– Defined as the probability of Reject H0 if p-value < 
“accepting” the null hypothesis when it 0.0606 is not < 0.01
is actually false.
– This is denoted by the Greek letter “β”

 p-VALUE is the probability of observing a

sample value as extreme as, or more
extreme than, the value observed, given
that the null hypothesis is true.

 In testing a hypothesis, we can also

compare the p-value to the significance
level ().

Conclude: Fail to reject H0

 Decision rule using the p-value:
Reject H0 if p-value < significance level
10-8
 Testing for the Population Mean:
Population Standard Deviation Unknown

When the population standard deviation (σ) is EXAMPLE

unknown, the sample standard deviation (s) is The McFarland Insurance Company Claims
used in its place the t-distribution is used as test Department reports the mean cost to process a
statistic, which is computed using the formula: claim is $60. An industry comparison showed
this amount to be larger than most other
insurance companies, so the company
instituted cost-cutting measures. To evaluate
the effect of the cost-cutting measures, the
Supervisor of the Claims Department selected
a random sample of 26 claims processed last
month. The sample information is reported
below.
At the .01 significance level is it reasonable a claim
is now less than $60?

10-9
 Testing for the Population Mean: Population
Standard Deviation Unknown - Example

Step 1: State the null hypothesis and the

alternate hypothesis.
H0:  ≥ $60
H1:  < $60

Step 2: Select the level of significance.

α = 0.01 as stated in the problem

Step 3: Select the test statistic.

Use t-distribution since σ is unknown

Step 4: Formulate the decision rule.

Reject H0 if t < -t,n-1

Step 5: Make a decision and interpret the result.

Because -1.818 does not fall in the rejection region,
H0 is not rejected at the .01 significance level.
We have not demonstrated that the cost-cutting
measures reduced the mean cost per claim to
less than $60. The difference of $3.58 ($56.42 -
$60) between the sample mean and the
population mean could be due to sampling
error.

10-10
 Tests Concerning Proportion
using the z-Distribution
 A Proportion is the fraction or percentage that indicates the part of the population or sample having a
particular trait of interest.
 The sample proportion is denoted by p and is found by x/n
(1) the sample data collected are the result of counts;
(2) the outcome of an experiment is classified into one of two mutually exclusive categories—a
“success” or a “failure”;
(3) the probability of a success is the same for each trial; and (4) the trials are independent
 Both n and n(1-  ) are at least 5.
 When the above conditions are met, the normal distribution can be used as an approximation to the
binomial distribution
 The test statistic is computed as follows:

10-11
 Test Statistic for Testing a Single
Population Proportion - Example
EXAMPLE Step 4: Formulate the decision rule.
Suppose prior elections in a certain state indicated it Reject H0 if Z < -Z
is necessary for a candidate for governor to
receive at least 80 percent of the vote in the
northern section of the state to be elected. The
incumbent governor is interested in assessing
his chances of returning to office and plans to
conduct a survey of 2,000 registered voters in
the northern section of the state. Using the
hypothesis-testing procedure, assess the
governor’s chances of reelection.

Step 1: State the null hypothesis and the

alternate hypothesis.
H0:  ≥ .80
H1:  < .80
(note: keyword in the problem “at least”)
Step 5: Make a decision and interpret the result.
Step 2: Select the level of significance.
The computed value of z (-2.80) is in the rejection
α = 0.01 as stated in the problem
region, so the null hypothesis is rejected at the .05
level. The evidence at this point does not support
Step 3: Select the test statistic. the claim that the incumbent governor will return
Use Z-distribution since the to the governor’s mansion for another four years.
assumptions are met and n and n(1-) ≥ 5
10-12
 Type II Error
 Recall Type I Error, the level of significance,
denoted by the Greek letter “”, is defined as the
probability of rejecting the null hypothesis when it
is actually true.

 Type II Error, denoted by the Greek letter “β”,is

defined as the probability of “accepting” the null
hypothesis when it is actually false.

EXAMPLE
A manufacturer purchases steel bars to make cotter
pins. Past experience indicates that the mean
tensile strength of all incoming shipments is
10,000 psi and that the standard deviation, σ, is
400 psi. In order to make a decision about
incoming shipments of steel bars, the
manufacturer set up this rule for the quality-control
inspector to follow: “Take a sample of 100 steel
bars. At the .05 significance level if the sample
mean strength falls between 9,922 psi and 10,078
psi, accept the lot. Otherwise the lot is to be
rejected.”

10-13
 Type I and Type II Errors Illustrated

10-14