SOLID WASTE MANAGEMENT AND TREATMENT

16CH350

Dr. Anoar Ali Khan

(Assistant Professor)

Dept. of Chemical Engineering

Unit 1
Sources and types of municipal
solid wastes
Course Description and Objectives:
The course deals with waste disposal and conversion techniques. The
objective of this course is to identify key sources, typical quantities
generated, composition, and properties of solid and hazardous waste, the
relevant regulations that apply for disposal, and destruction of waste.

Course Outcomes:

The student will be able to :

• Identify the physical and chemical composition of waste
• Understand the techniques and methods used in conversion and recovery
of materials from solid waste
What is waste ?
It is unwanted materials and objects that people have thrown away. It is often also
called trash, garbage, rubbish, or junk. It can be solid, liquid, or gas, or it can
be waste heat. When waste is a liquid or gas, it can be called an emission.

Waste is an unavoidable by-product of most human activity.

Solid wastes may be defined as useless, unused, unwanted, or discarded material

available in solid form. Semisolid food wastes and municipal sludge may also be
included in municipal solid waste

What is solid waste?

Solid wastes are the wastes arising from human and animal activities that are
normally solid and are discarded as useless or unwanted. This unavoidably places
an enormous strain on natural resources and seriously undermines efficient and
sustainable development
Municipal solid waste (MSW)

Municipal solid waste (MSW) includes wastes such as durable goods, nondurable
goods, containers and packaging, food wastes yard wastes, and miscellaneous
inorganic wastes from residential, commercial, institutional, and industrial sources.
Example of waste from these categories include appliances, newspapers,
clothing, food scarps, boxes, disposable tableware, office and classroom paper,
wood pallets, and cafeteria wastes. MSW does not include wastes from sources
such as municipal sludge, combustion ash, and industrial non-hazardous process
wastes that might also be disposed of in municipal waste landfills or incinerators.
 Classification of solid waste

Solid wastes are the organic and inorganic waste materials such as product
packaging, grass clippings, furniture, clothing, bottles, kitchen refuse, paper,
appliances, paint cans, batteries, etc., produced in a society, which do not
generally carry any value to the first user. Solid wastes, thus, encompass both a
heterogeneous mass of wastes from the urban community as well as a more
homogeneous accumulation of agricultural, industrial and mineral wastes.

• Source-based classification
• Type-based classification

Source-based classification

(i) Residential: This refers to wastes from dwellings, apartments, etc., and consists
of leftover food, vegetable peels, plastic, clothes, ashes, etc.

(ii) Commercial: This refers to wastes consisting of leftover food, glasses, metals,
ashes, etc., generated from stores, restaurants, markets, hotels, motels, auto-
repair shops, medical facilities, etc.
(iii)
Institutional: This mainly consists of paper, plastic, glasses, etc.,
generated from educational, administrative and public buildings such as
schools, colleges, offices, prisons, etc.

(iv) Municipal: This includes dust, leafy matter, building debris, treatment
plant residual sludge, etc., generated from various municipal activities like
construction and demolition, street cleaning, landscaping, etc. (Note,
however, in India municipal can typically subsume items at (i) to (iii) above).

(v) Industrial: This mainly consists of process wastes, ashes, demolition

and construction wastes, hazardous wastes, etc., due to industrial activities.

(vi) Agricultural: This mainly consists of spoiled food grains and

vegetables, agricultural remains, litter, etc., generated from fields, orchards,
vineyards, farms, etc.

(vii) Open areas: this includes wastes from areas such as Streets, alleys,
parks, vacant lots, playgrounds, beaches, highways, recreational areas, etc.
Type-based classification

Classification of wastes based on types, i.e., physical, chemical, and biological

characteristics of wastes, is as follows

(i) Garbage: This refers to animal and vegetable wastes resulting from the handling,
sale, storage, preparation, cooking and serving of food. Garbage comprising these
wastes contains putrescible (rotting) organic matter, which produces an obnoxious
odour and attracts rats and other vermin. It, therefore, requires special attention in
storage, handling and disposal.

(ii) Ashes and residues: These are substances remaining from the burning of
wood, coal, charcoal, coke and other combustible materials for cooking and heating
in houses, institutions and small industrial establishments. When produced in large
quantities, as in power-generation plants and factories, these are classified as
industrial wastes. Ashes consist of fine powdery residue, cinders and clinker often
mixed with small pieces of metal and glass. Since ashes and residues are almost
entirely inorganic, they are valuable in landfills.
(iii) Combustible and non-combustible wastes: These consist of wastes
generated from households, institutions, commercial activities, etc., excluding food
wastes and other highly putrescible material. Typically, while combustible material
consists of paper, cardboard, textile, rubber, garden trimmings, etc., non-combustible
material consists of such items as glass, crockery, tin and aluminium cans, ferrous
and non-ferrous material and dirt.

(iv) Bulky wastes: These include large household appliances such as refrigerators,
washing machines, furniture, crates, vehicle parts, tyres, wood, trees and branches.
Since these household wastes cannot be accommodated in normal storage
containers, they require a special collection mechanism.

(v) Street wastes: These refer to wastes that are collected from streets, walkways,
alleys, parks and vacant plots, and include paper, cardboard, plastics, dirt, leaves
and other vegetable matter. Littering in public places is indeed a widespread and
acute problem in many countries including India, and a solid waste management
system must address this menace appropriately
vi) Biodegradable and non-biodegradable wastes: Biodegradable wastes mainly
refer to substances consisting of organic matter such as leftover food, vegetable
and fruit peels, paper, textile, wood, etc., generated from various household and
industrial activities. Because of the action of micro-organisms, these wastes are
degraded from complex to simpler compounds. Non-biodegradable wastes consist
of inorganic and recyclable materials such as plastic, glass, cans, metals, etc. Table
1.1 below shows a comparison of biodegradable and non-biodegradable wastes
with their degeneration time, i.e., the time required to break from a complex to a
simple biological form.

vi) Dead animals: With regard to municipal wastes, dead animals are those that die
naturally or are accidentally killed on the road. Note that this category does not
include carcasses and animal parts from slaughter-houses, which are regarded as
industrial wastes. Dead animals are divided into two groups – large and small.
Among the large animals are horses, cows, goats, sheep, pigs, etc., and among the
small ones are dogs, cats, rabbits, rats, etc. The reason for this differentiation is that
large animals require special equipment for lifting and handling when they are
removed. If not collected promptly, dead animals pose a threat to public health since
they attract flies and other vermin as they decay. Their presence in public places is
particularly offensive from the aesthetic point of view as well

.
(viii) Abandoned vehicles: This category includes automobiles, trucks
and trailers that are abandoned on streets and other public places.
However, abandoned vehicles have significant scrap value for their metal,
and their value to collectors is highly variable.

(ix) Construction and demolition wastes: These are wastes generated

as a result of construction, refurbishment, repair and demolition of
houses, commercial buildings and other structures. They consist mainly of
earth, stones, concrete, bricks, lumber, roofing and plumbing materials,
heating systems and electrical wires and parts of the general municipal
waste stream.

(x) Farm wastes: These wastes result from diverse agricultural activities
such as planting, harvesting, production of milk, rearing of animals for
slaughter and the operation of feedlots. In many areas, the disposal of
animal waste has become a critical problem, especially from feedlots,
poultry farms and dairies.
(xi) Hazardous wastes: Hazardous wastes are those defined as wastes
of industrial, institutional or consumer origin that are potentially dangerous
either immediately or over a period of time to human beings and the
environment. This is due to their physical, chemical and biological or
radioactive characteristics like ignitability, corrosivity, reactivity and
toxicity. Note that in some cases, the active agents may be liquid or
gaseous hazardous wastes. These are, nevertheless, classified as solid
wastes as they are confined in solid containers. Typical examples of
hazardous wastes are empty containers of solvents, paints and
pesticides, which are frequently mixed with municipal wastes and become
part of the urban waste stream. Certain hazardous wastes may cause
explosions in incinerators and fires at landfill sites. Others such as
pathological wastes from hospitals and radioactive wastes also require
special handling. Effective management practices should ensure that
hazardous wastes are stored, collected, transported and disposed of
separately, preferably after suitable treatment to render them harmless.
(xii) Sewage wastes: The solid by-products of sewage treatment are
classified as sewage wastes. They are mostly organic and derived from
the treatment of organic sludge separated from both raw and treated
sewages. The inorganic fraction of raw sewage such as grit and
eggshells is separated at the preliminary stage of treatment, as it may
entrain putrescible organic matter with pathogens and must be buried
without delay. The bulk of treated, dewatered sludge is useful as a soil
conditioner but is invariably uneconomical. Solid sludge, therefore, enters
the stream of municipal wastes, unless special arrangements are made
for its disposal
Factors that influence the quantity of municipal wastes
generated include:

Geographic location

Season of the year

Collection frequency

Use of kitchen waste grinders

Characteristics of populace

Extent of salvaging and recycling

Public attitudes

Legislation
 Solid Waste Characteristics
• Physical and chemical composition of solid wastes vary depending on
sources and types of solid wastes.

• The nature of the deposited waste in a landfill will affect gas and leachate
production and composition by virtue of relative proportions of degradable
and non-degradeable components, the moisture content and the specific
nature of the bio-degradeable element.

• The waste composition will effect both the bulk gases and the trace
components.

Determination of Characteristics in the Field:

• Solid wastes are complex, multiphase mixtures.
• Because of the heterogeneous nature of solid wastes, determination of
composition is not easy. Statistical procedures are difficult and usually
procedures based on random sampling techniques are used to determine
composition.
• To obtain a sample for analysis the waste is reduced to about 100 kg by
coning and quartering.
 Waste Characteristics

In order to identify the exact characteristics of municipal wastes, it is necessary

that we analyse them using physical and chemical parameters.

Chemical Characteristics
Physical Characteristics
Proximate analysis
Chemical Characteristics Fusing point of ash
Ultimate analysis
Energy content

Physical Characteristics
Density/Specific weight Color
Moisture content Voids
Particle size Shape of components
Size distribution Optical property
Field capacity Magnetic properties
Compacted waste porosity Electric properties
 Physical Characteristics
Information and data on the physical characteristics of solid wastes are
important for the selection and operation of equipment and for the analysis
and design of disposal facilities.

The major physical characteristics measured in waste are:

(1) density
(2) size distribution of components and
(3) moisture content.

Other characteristics which may be used in making decision about solid

waste management are:
(1) colour
(2) voids
(3) shape of components
(4) optical property
(5) magnetic properties and
(6) electric properties.
 Physical Characteristics

The required information and data include the following:

Density or Specific weight:

Density of waste, i.e. its mass per unit volume (kg/m3) is a critical factor in the
design of a SWM system e.g., the design of sanitary landfills, storage, types of
collection and transport vehicles etc.

To explain, an efficient operation of a landfill demands compaction of wastes to

optimum density.

Any normal compaction equipment can achieve reduction in volume of wastes

by 75%, which increases an initial density of 100 kg/m3 to 400 kg/m3.
Because the densities of solid wastes vary markedly with geographic
location, season of the year, the length of time in storage, great care should
be used in selecting typical values. Municipal solid wastes as delivered in
compaction vehicles have been found to have a typical value about 300
kg/m3.
 Physical Characteristics

In other words, a waste collection vehicle can haul four times the weight of
waste in its compacted state than when it is uncompacted.

A high initial density of waste precludes the achievement of a high compaction

ratio and the compaction ratio achieved is no greater than 1.5:1.

Significant changes in density occur spontaneously as the waste moves from

source to disposal, due to scavenging, handling, wetting and drying by the
weather, vibration in the collection vehicle and decomposition.

Note that:
• the effect of increasing the moisture content of the waste is detrimental in
the sense that dry density decreases at higher moisture levels
• soil-cover plays an important role in containing the waste
• there is an upper limit to the density, and the conservative estimate of in-
place density for waste in a sanitary landfill is about 600 kg/m3
 Physical Characteristics

Moisture content:

Moisture content is defined as the ratio of the weight of water (wet weight - dry
weight) to the total weight of the wet waste.

Note: Dry weight is the weight of sample after drying at 105 0C

Moisture increases the weight of solid wastes and thereby, the cost of collection
and transport.

In addition, moisture content is a critical determinant in the economic feasibility

of waste treatment by incineration because wet waste consumes energy for
evaporation of water and in raising the temperature of water vapour.

In the main, wastes should be insulated from rainfall or other extraneous water.
 Physical Characteristics

We can calculate the moisture percentage, using the formula given below:

wd Where M = moisture content, %

M  100 W= initial weight of sample as delivered, kg
 w 
D=weight of sample after drying at 105 0C, kg

A typical range of moisture content is 20 to 40%, representing the extremes

of wastes in an arid climate and in the wet season of a region of high
precipitation. However, values greater than 40% are not uncommon.
 Physical Characteristics

Size:

The size and size distribution of the component materials in solid wastes are
an important consideration in the recovery of materials especially with
mechanical means such as trommel screens and magnetic separators.

Measurement of size distribution of particles in waste stream is important

because of its significance in the design of mechanical separators and
shredders.

Generally, the results of size distribution analysis are expressed in the manner
used for soil particle analysis.

That is to say, they are expressed as a plot of particle size (mm) against
percentage, less than a given value.
 Physical Characteristics

Size:

The size of waste component may be defined by one or more of the following
measures:
SC  l

l  w
SC   
 2 
Where
SC     
l w h
 3  SC = size of component in mm
l= length in mm
SC  l  w w = width in mm
1 h = height in mm
2

SC  l  w  h
1

3
 Physical Characteristics
• The major means of controlling particle size is through shredding.

• Shredding increases homogeneity, increases the surface area/volume ratio

and reduces the potential for preferential liquid flow paths through the
waste.

• Particle size will also influence waste packing densities and particle size
reduction (by shredding) could increase biogas production through the
increased surface area available to degradation by bacteria.

• But the smaller particles allow higher packing density which decrease water
movement, bacterial movement and the bacterial access to substrate
 Physical Characteristics
• Optical property can be used to segregate opaque materials from
transparent substances which would predominately contain glass and
plastic.

• Magnetic separators are designed based on the magnetic characteristics

of the waste.

• Moisture content is essential for leachate calculation and composting.

• Density is used to assess volume of transportation vehicle and size of the

disposal facility.

• Shape can be used for segregation as flaky substance will behave

differently compared to non-flaky substance.
 Physical Characteristics

The physical properties that are essential to analyse wastes disposed at

landfills are:

Field capacity:

The field capacity of MSW is the total amount of moisture which can be
retained in a waste sample subject to gravitational pull.

It is used to determine the formation of leachate in landfills.

It is a critical measure because water in excess of field capacity will form

leachate and leachate can be a major problem in landfills.

Field capacity varies with the degree of applied pressure and the state of
decomposition of the wastes.
 Physical Characteristics

Permeability of compacted wastes:

The hydraulic conductivity of compacted wastes is an important physical

property because it governs the movement of liquids and gases in a landfill.

Permeability depends on the other properties of the solid material include pore
size distribution, surface area and porosity.

The coefficient of permeability is normally written as   k

K  cd 2

 
Where
K = coefficient of permeability γ = specific weight of water

C = dimensionless constant or shape factor µ = dynamic viscosity of water

d = average size of pores k = intrinsic permeability

 Physical Characteristics
The term Cd2 is known as the intrinsic permeability.

The intrinsic permeability depends solely on the properties of the solid material
including pore size distribution, tortuosity, specific surface and porosity.

Typical values for the intrinsic permeability for compacted solid waste in a
landfill are in the range between about 10-11 and 10-12 m2 in the vertical
direction and about 10-10 m2 in the horizontal direction.

The reported range of permeability of refuse is 10-1 to 10-5 cm/sec.

Porosity:

It represents the amount of voids per unit overall volume of material.

The porosity of MSW varies typically from 0.40 to 0.67 depending on the
compaction and composition of the waste.

Porosity of solid waste n= e/ (1+e) Where e is void ratio of solid waste

 Physical Characteristics

Compressibility of MSW:

Degree of physical changes of the suspended solids or filter cake when

subjected to pressure.

ΔHT =ΔHi +ΔHc +Δhα

ΔHT= total settlement

ΔHi=immediate settlement
ΔHc = consolidation settlement
ΔHα = secondary compression or creep

C’α = ΔH/ [H0 X (Log (t2/t1))] = Cα/ (1+e0)

Cα, C’α = Secondary compression index and Modified secondary

Compression index; and t1, t2= Starting and ending time of secondary
settlement respectively
 Physical Characteristics
Determine the moisture content of the sample from the following data:
Physical Characteristics
Physical Characteristics
 Chemical Characteristics
Chemical characteristics:

Knowledge of the classification of chemical compounds and their

characteristics is essential for the proper understanding of the behaviour of
waste, as it moves through the waste management system.

The products of decomposition and heating values are two examples of

chemical characteristics. If solid wastes are to be used as fuel, or are used for
any other purpose, we must know their chemical characteristics, including the
following:
• Lipids Important chemical properties
• Carbohydrates measured for solid waste are: (1)
• Proteins moisture (water content can
• Natural fibres change chemical and physical
• Synthetic organic material (Plastics) properties) (2) volatile matter (3)
• Non-combustibles ash (4) fixed carbon (5) fusing
• Heating value point of ash (6) calorific value (7)
• Ultimate analysis percent of carbon, hydrogen,
• Proximate analysis oxygen, sulphur and ash.
 Chemical Characteristics

Lipids:

This class of compounds includes fats, oils and grease and the principal
sources of lipids are garbage, cooking oils and fats.

Lipids have high heating values, about 38,000 kJ/kg (kilojoules per kilogram),
which makes waste with high lipid content suitable for energy recovery.

Since lipids become liquid at temperatures slightly above ambient, they add to
the liquid content during waste decomposition.

Though they are biodegradable, the rate of biodegradation is relatively slow

because lipids have a low solubility in water.
 Chemical Characteristics
Carbohydrates:

These are found primarily in food and yard wastes, which encompass sugar
and polymer of sugars (e.g., starch, cellulose, etc.) with general formula
(CH2O)x.

Carbohydrates are readily biodegraded to products such as carbon dioxide,

water and methane.

Decomposing carbohydrates attract flies and rats and therefore, should not be
left exposed for long duration.

Proteins:

These are compounds containing carbon, hydrogen, oxygen and nitrogen and
consist of an organic acid with a substituted amine group (NH2).

They are mainly found in food and garden wastes. The partial decomposition
of these compounds can result in the production of amines that have
unpleasant odours.
 Chemical Characteristics
Natural fibres:

These are found in paper products, food and yard wastes and include the
natural compounds, cellulose and lignin that are resistant to biodegradation.
(Note that paper is almost 100% cellulose, cotton over 95% and wood
products over 40%.)

Because they are a highly combustible solid waste, having a high proportion of
paper and wood products, they are suitable for incineration.

Calorific values of oven-dried paper products are in the range of 12,000 -

18,000 kJ/kg and of wood about 20,000 kJ/kg, i.e., about half that for fuel oil,
which is 44,200 kJ/kg.
 Chemical Characteristics
Synthetic organic material (Plastics):

Accounting for 1 – 10%, plastics have become a significant component of solid

waste in recent years.

They are highly resistant to biodegradation and therefore, are objectionable

and of special concern in SWM.

Hence the increasing attention being paid to the recycling of plastics to reduce
the proportion of this waste component at disposal sites.

Plastics have a high heating value, about 32,000 kJ/kg, which makes them
very suitable for incineration.

But, you must note that polyvinyl chloride (PVC), when burnt, produces dioxin
and acid gas.

The latter increases corrosion in the combustion system and is responsible for
acid rain..
 Chemical Characteristics
Non-combustibles:

This class includes glass, ceramics, metals, dust and ashes, and accounts for
12 – 25% of dry solids.

Energy Content of Solid Waste Components:

The energy content of the organic components in MSW can be determined (1)
by using a full scale boiler as a calorimeter (2) by using a laboratory bomb
calorimeter, and (3) by calculation, if the elemental composition is known.

Because of the difficulty in instrumenting a full-scale boiler, most of the data on

the energy content of the organic components of MSW are based on the
results of bomb calorimeter tests.
 Chemical Characteristics
Heating value:

An evaluation of the potential of waste material for use as fuel for incineration
requires a determination of its heating value expressed as kilojoules per
kilogram (kJ/kg).

The heating value is determined experimentally using the Bomb calorimeter

test, in which the heat generated, at a constant temperature of 25 0C from the
combustion of a dry sample is measured.

Since the test temperature is below the boiling point of water (100 0C), the
combustion water remains in the liquid state.

However, during combustion, the temperature of the combustion gases

reaches above 100 0C, and the resultant water is in the vapour form.
 Chemical Characteristics
Typical Heating and Inert Residue Values
 Chemical Characteristics
Note that while evaluating incineration as a means of disposal or energy
recovery, we need to consider the heating values of respective constituents.

For example:
• Organic material yields energy only when dry.

• The moisture content in the waste reduces the dry organic material per
kilogram of waste and requires a significant amount of energy for drying.

• The ash content of the waste reduces the proportion of dry organic
material per kilogram of waste and retains some heat when removed
from the furnace.
 Chemical Characteristics
Ultimate analysis:

• This refers to an analysis of waste to determine the proportion of carbon,

hydrogen, oxygen, nitrogen and sulphur and the analysis is done to
make mass balance calculation for a chemical or thermal process.

• Besides, it is necessary to determine ash fraction because of its

potentially harmful environmental effects, brought about by the presence of
toxic metals such as cadmium, chromium, mercury, nickel, lead, tin and
zinc.

• Note that other metals (e.g., iron, magnesium, etc.) may also be present
but they are non-toxic.

• The results are use to characterize the chemical composition of the

organic matter in MSW.
• Used to define proper mix of waste material to achieve suitable C/N ratios
for biological conversion processes.
 Chemical Characteristics
Analysis for solid waste for carbon, hydrogen, nitrogen and sulphur can be
done using CHNS analyser.

In the absence of such equipment chemical formula for solid waste can be
calculated.

CHNS analyser used for analysis of

carbon, hydrogen, nitrogen and sulphur
 Chemical Characteristics

Municipal Solid Waste: A Typical Ultimate Analysis

 Chemical Characteristics
Proximate analysis:

Proximate analysis of waste aims to determine moisture, volatile matter, ash

and fixed carbon. This is important in evaluating the combustion properties of
wastes or refuse derived fuel.

The fractions of interest are:

• moisture content which adds weight to the waste without increasing its
heating value, and the evaporation of water reduces the heat released
from the fuel

• ash which adds weight without generating any heat during combustion

• volatile matter i.e. that portion of the waste that is converted to gases
before and during combustion

• fixed carbon which represents the carbon remaining on the surface

grates as charcoal. A waste or fuel with a high proportion of fixed carbon
requires a longer retention time on the furnace grates to achieve
complete combustion than a waste or fuel with a low proportion of fixed
carbon
 Chemical Characteristics
Proximate analysis:

Proximate analysis for the combustible components of MSW includes the

following tests

• Loss of moisture (loss at 105 0C for 1 h)

• Volatile Combustible Matter (VCM) (additional loss of weight on

ignition at 950 0C in a closed crucible i.e. additional loss on ignition at
950 0C)

• Fixed Carbon (combustible residue left after volatile matter is

recovered i.e. residue after burning)

• Ash (weight of residue after combustion in an open crucible i.e.

remainder)
 Chemical Characteristics

Municipal Solid Waste: A Typical Proximate Analysis

 Chemical Characteristics
Fusing Point of Ash

The fusing point ash is defined as that temperature at which the ash resulting
from the burning of waste will form a solid (clinker) by fusion and
agglomeration.

Typical fusing temperature for the formation of clinker from solid waste range
from 2000 to 2200 oF (1100 to 1200 oC).
Example: Estimation of the chemical composition of a solid waste sample.
Determine the chemical composition of the organic fraction, without and with
sulfur and without and with water of a residential MSW with the typical
composition shown in Table
Component Wet MC % by weight (Dry Basis)
weight %

C H O N S Ash
Food Waste 9 70 48 6.4 37.6 2.6 0.4 5.0
Paper 34 6 43.5 6.0 44 0.3 0.2 6.0
Card Board 6.0 5 44 5.9 44.6 0.3 0.2 5.0
Plastics 7.0 2 60.0 7.2 22.8 - - 10
Textiles 2 10 55 6.6 31.2 4.6 - 2.5
Rubber 0.5 2 78 10 - 2.0 - 10
Leather 0.5 10 60 8.0 11.6 10 - 10
Yard Waste 18.5 60 47.8 6 38 3.4 0.3 4.5
Wood 2.0 20 49.5 6 42.7 0.2 0.1 1.5
Component Wet Dry Composition, lb
weight, Weight,
lb lb
C H O N S Ash
Food waste 9 2.7 1.3 0.17 1.02 0.07 0.01 0.14

Paper 34 32 13.92 1.92 14.08 0.10 0.06 1.92

Cardboard 6 5.7 2.51 0.34 2.54 0.02 0.01 0.28

Plastics 7 6.86 4.14 0.50 1.57 - - 0.69

Textiles 2 1.8 0.99 0.12 0.56 0.08 - 0.05

Rubber 0.5 0.49 0.39 0.05 - 0.01 - 0.05

Leather 0.5 0.45 0.24 0.03 0.05 0.04 - 0.04

Yard wastes 18.5 7.4 3.11 0.39 2.47 0.22 0.02 0.29

Wood 2 1.6 0.79 0.10 0.68 - - 0.02

 Biological Properties of MSW
Biological Properties
Biodegradability of OWC
Odors
Breeding of flies

The most important biological characteristic of the organic fraction of MSW is

that almost all of the organic components can be converted biologically to
gases and relatively inert organic and inorganic solids.

The production of odours and the generation of flies are also related to the
putrescible nature of the organic materials found in MSW (e.g., food wastes).
 Biological Properties of MSW
Excluding plastic, rubber and leather components, the organic fraction of most
MSW can be classified as follows:

• Water-soluble constituents such as sugars, starches, amino acids, and

various organic acids.
• Hemicelluloses, a condensation product of five- and six-carbon sugars
• Cellulose, a condensation product of the six-carbon sugar glucose
• Fats, oils, and waxes which are esters of alcohols and long-chain fatty
acids
• Lignin, a polymeric material containing aromatic rings with methoxyl
groups (-OCH3), the exact chemical nature of which is still not known
(present in some paper products such as newsprint and fibreboard)
• Lignocelluloses, a combination of lignin and cellulose
• Proteins, which are composed of chains of amino acids
 Biological Properties of MSW
Biodegradability of Organic Waste Components

Volatile solids (VS) content, determined by ignition at 550 oC, is often used as a
measure of the biodegradability of the organic fraction of MSW.

The use of VS in describing the biodegradability of the organic fraction of MSW is

misleading, as some of the organic constituents of MSW are highly volatile but
low in biodegradability (e.g., newsprint and certain plant trimmings).

Alternatively, the lignin content of a waste can be used to estimate the

biodegradable fraction, using the following relationship:

BF = 0.83 – 0.028 LC

where BF= biodegradable fraction expressed on a volatile solids (VS) basis

0.83 = empirical constant
0.028 = empirical constant
LC = lignin content of VS expressed as a percent of dry weight

Wastes with high lignin contents, such as newsprint, are significantly less
biodegradable than the other organic wastes found in MSW.
 Waste Characteristics

Physical, chemical and biological

characteristics vary hugely from place to
place
25-11-2019