New Thermoforming

R V College of Engineering
Dept of mechanical engineering
Presentation on
THERMOFORMING
One of the manufacturing process
By,
Vijay pattanashetti
1RV18MMD18
Contents
• Thermoforming process
• Materials used
• Types Of Thermoforming Process
Vacuum forming
Pressure forming
Matched die forming
• Advantages
• Disadvantages
• Applications
• Definition:-Thermoforming is a manufacturing
process where a plastic sheet is heated to a
pliable forming temperature, formed to a
specific shape in a mold, and trimmed to
create a usable product
• Thin sheet (up to 1.5 mm) and thick sheet

(about 3 mm) can be formed easily.
Types of molds
• Plaster of paris mold
• Wooden mold
• Plastic mold
• Aluminium mold
Materials used
 The different types of thermoplastic materials which
can be processed using thermoforming process are:-
• Acrylic (PMMA)
• Acrylonitrile butadiene styrene (ABS)
• Cellulose acetate
• Low density polyethylene (LDPE)
• High density polyethylene (HDPE),
• Polypropylene (PP),
• Polystyrene (PS)
• Polyvinyl chloride (PVC)
Animation of thermoforming process
Types Of Thermoforming Process
• There are mainly three different types of
thermoforming process depending upon the
pressure required
Vacuum forming
Pressure forming
Matched die forming
1.Vacuum forming process
1.Vacuum forming process
• The vacuum pressure is used to form the heated
thermoplastic sheet into the desired shape.
• The thermoplastic sheet is placed on the mold surface
and fixed with the help of clamping unit.
• The sheet is heated until it is softens and thereafter
vacuum needs to be applied quickly.
• A surge tank is used to quickly pull the air out between
the mold cavity and the sheet.
• When the vacuum is created, the sheet conforms to
the shape of the mold cavity.
• The formed part is cooled and then ejected from the
mold cavity.
2.Pressure forming process
2.Pressure forming process
• The pressure forming process is closely related to vacuum forming.
• In this process, the air pressure required is much higher as
compared to the vacuum forming.
• The preheated plastic sheet is placed on the mold surface, and then
air pressure is applied quickly above the sheet.
• The high pressure is developed in between the softened sheet and
the pressure box.
• Due to high pressure, the preheated plastic sheet can be deformed
into the mold cavity in a fraction of a second.
• The formed sheet is held in the mold cavity for cooling for a few
seconds.
• The formed part there by solidifies and is ejected from mold cavity.
• Prototype parts can also be made using pressure forming process.
3.Match die forming
3.Matched die forming
• Matched die forming is also called mechanical forming.
• In this process, mold consists of two parts i.e. die and
punch.
• The thermoplastic sheet is heated with the application of
heat until it softenes.
• The preheated sheet is placed into the mold surface (that is
called die) and through punch pressure is applied on the
hot sheet.
• The air in between the die and softened sheet is evacuated
by using vacuum pump, and therefore the thermoplastic
sheet conforms to the mold shape.
• The formed part is cooled and ejected from the mold
cavity.
Advantages
• Extremely adaptive to design requirement
• Rapid prototype development
• Low initial setup costs
• Low production costs
• Less thermal stresses than injection molding
and compression molding
• Good dimensional stability
Disadvantages
• Poor surface finish
• Parts may have non-uniform wall thickness.
• All parts need to be trimmed
• Limited number of materials can be used
• Very thick plastic sheets can’t be formed
Applications
 Thermoforming process is used for variety of applications
• Food packaging,
• Automotive parts
• Trays
• Building products
• Aircraft windscreens
 Thick gauge parts are used as cosmetic surfaces on permanent
structures such as trucks, medical equipment, material handling
equipment, electrical and electronic equipment, vehicle door,
refrigerator liners and plastic pallets.
 Thin gauge parts are primarily used to package or contain a food
item, disposable cups, containers, lids, blisters and clamshells.
Thermoforming machine
US $79000-83000
References
1) https://en.wikipedia.org/wiki/Thermoformin
g
2) https://nptel.ac.in/courses/112107085/mod
ule4/lecture6

New Thermoforming

Uploaded by

Copyright:

Available Formats

New Thermoforming

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

New Thermoforming

Uploaded by

Copyright:

Available Formats

R V College of Engineering

Dept of mechanical engineering

• Thin sheet (up to 1.5 mm) and thick sheet

You might also like