CH 14 Single-Station Manufacturing Cells

Ch 14
Single-Station Manufacturing Cells

Sections:
1. Single-Station Manned Workstations
2. Single-Station Automated Cells
3. Applications of Single-Station Cells
4. Analysis of Single-Station Cells
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 1
Classification of
 Most common manufacturing system in industry

 Operation is independent of other stations
 Perform either processing or assembly operations
 Can be designed for:
 Single model production – all parts/products made by the system are
identical
 Batch production – different part styles are made in batches
 Mixed model production – different part styles are made
sequentially, not in batches
Analysis of Single-Station Systems
 How many workstations are required to satisfy production

requirements?
 How many machines can be assigned to one worker in a
machine cluster?
A machine cluster is a collection of two or more identical or

similar machines that are serviced by one worker.
Single-Station Manned Cell
“One worker tending one production machine (most

common model)”
 Most widely used production method, especially in job
shop and batch production
 Reasons for popularity:
 Shortest time to implement
 Requires least capital investment
 Easiest to install and operate
 Typically, the lowest unit cost for low production
 Most flexible for product or part changeovers
Single-Station Manned Cell Examples
 Worker operating a standard machine tool
 Worker loads/unloads parts, operates machine
 Machine is manually operated
 Worker operating semi-automatic machine
 Worker loads/unloads parts, starts semi-automatic work
cycle
 Worker attention not required continuously during entire
work cycle
 Worker using hand tools or portable power tools at one
location
Variations of
Single-Station Manned Cell
 Two (or more) workers required to operate machine (w>1)
 Two workers required to manipulate heavy forging at forge
press
 Welder and fitter in arc welding work cell
 One principal production machine plus support equipment
 Drying equipment for a manually operated injection molding
machine
 Trimming shears at impression-die forge hammer to trim
flash from forged part
Single-Station Automated Cell
“Fully automated production machine capable of

operating unattended for longer than one work cycle”
 Worker not required except for periodic tending
 Reasons why it is important:
 Labor cost is reduced
 Easiest and least expensive automated system to
implement
 Production rates usually higher than manned cell
 First step in implementing an integrated multi-station
automated system
Enablers for
Unattended Cell Operation
 For single model and batch model production:
 Programmed operation for all steps in work cycle
 Parts storage subsystem
 Automatic loading, unloading, and transfer between parts
storage subsystem and machine
 Periodic attention of worker for removal of finished work
units, resupply of starting work units, and other machine
tending
 Built-in safeguards to avoid self-destructive operation or
damage to work units
Enablers for
Unattended Cell Operation
 For mixed model production:
 All of the preceding enablers, plus:
 Work unit identification:
 Automatic identification (e.g., bar codes) or sensors
that recognize alternative features of starting units
 If starting units are the same, work unit identification
is unnecessary
 Capability to download programs for each work unit
style (programs prepared in advance)
 Capability for quick changeover of physical setup
Parts Storage Subsystem and
Automatic Parts Transfer
np = parts storage capacity of the storage subsystem (pieces)
Tcj= cycle time for part j that is held in the parts substorage
system (min)
UT = unattended time of operation
np
UT   Tcj
j 1
This equation assumes that one work unit is processed each cycle.
Parts Storage Subsystem and
Automatic Parts Transfer
 If all the parts are identical and require the same machine cycle,
UT = npTc
 In reality, unattended time will be less than UT because the
worker needs time to unload finished parts and load raw
work parts into the storage subsystem
Parts Storage Capacity
 Typical objectives in defining the desired parts storage capacity

np :
 Make npTc = a fixed time interval that allows one worker to
tend multiple machines
 Make npTc = time between scheduled tool changes
 Make npTc = one complete shift
 Make npTc = one overnight (“lights-out operation”)
Storage Capacity of One Part
 Example: two-position automatic pallet changer (APC)

 With no pallet changer, work cycle elements of
loading/unloading and processing would have to be performed
sequentially
Tc = Tm + Ts
where Tm = machine time and Ts = worker service time
 With pallet changer, work cycle elements can be performed
simultaneously
Tc = Max{Tm, Ts} + Tr
where Tr = repositioning time of pallet changer
CNC Machining Center with Automatic
Pallet Changer - Stores One Part
Storage Capacities Greater Than One
 Machining centers:
 Various designs of parts storage unit interfaced to
automatic pallet changer (or other automated transfer
mechanism)
 Turning centers:
 Industrial robot interface with parts carousel
 Plastic molding or extrusion:
 Hopper contains sufficient molding compound for
unattended operation
 Sheet metal stamping:
 Starting material is sheet metal coil
Machining center and automatic pallet changer with pallet holders arranged
radially; parts storage capacity = 5
Machining center and in-line shuttle cart system with pallet holders along its
length; parts storage capacity = 16
Machining center with pallets held on indexing table; parts storage capacity =
6
Machining center and parts storage carousel with parts loaded onto pallets;
parts storage capacity = 12
Applications of Single Station
Manned Cells
 CNC machining center with worker to load/unload
 CNC turning center with worker to load/unload
 Cluster of two CNC turning centers (TC) with time sharing of
one worker to load/unload
 Plastic injection molding on semi-automatic cycle with worker
to unload molding, sprue, and runner
 One worker at electronics subassembly workstation inserting
components into PCB
 Stamping press with worker loading blanks and unloading
stampings each cycle
Applications of Single Station
Automated Cells
 CNC MC with APC and parts storage subsystem
 CNC TC with robot and parts storage carousel
 Cluster of ten CNC TCs, each with robot and parts storage
carousel, and time sharing of one worker to load/unload the
carousels
 Plastic injection molding on automatic cycle with robot arm to
unload molding, sprue, and runner
 Electronics assembly station with automated insertion machine
inserting components into PCBs
 Stamping press stamps parts from long coil
CNC Machining Center
Machine tool capable of performing multiple operations that use

rotating tools on a workpart in one setup under NC control
 Typical operations: milling, drilling, and related operations
 Typical features to reduce nonproductive time:
 Automatic tool changer
 Automatic workpart positioning
 Automatic pallet changer
CNC Horizontal Machining Center
CNC Turning Center
Machine tool capable of performing multiple operations on a

rotating workpart in one setup under NC control
 Typical operations:
 Turning and related operations, e.g., contour turning
 Drilling and related operations along workpart axis of
rotation
CNC Turning Center
Automated Stamping Press
Stamping press on automatic cycle producing stampings from

sheet metal coil
CNC Mill-Turn Center
Machine tool capable of performing multiple operations either with

single point turning tools or rotating cutters in one setup under
NC control
 Typical operations:
 Turning, milling, drilling and related operations
 Enabling feature:
 Capability to control position of c-axis in addition to x- and
z-axis control (turning center is limited to x- and z-axis
control)
Part with Mill-Turn Features
Example part with turned, milled, and drilled features
Sequence of Operations of a
Mill-Turn Center for Example Part
(1) Turn smaller diameter, (2) mill flat with part in programmed angular
positions, four positions for square cross section; (3) drill hole with part in
programmed angular position, and (4) cutoff of the machined piece
Analysis of Single-Station Systems
 No of single stations required to satisfy specified production

requirements, and
 No of machines to assign to a worker in a machine cluster
Number of Workstations
1. Determine the total workload that must be accomplished in a

certain period, where workload is defined as the total hours
required to complete a given amount of work or to produce a
given number of work units scheduled during the period.
2. Divide the workload by the hours available on one workstation
in the same period.
WL  QTc
WL=workload scheduled for a given period (hr or work/hr)
Q= quantity to be produced during the period (pc/hr)
Tc= cycle time required per piece (hr/pc)
If there are multiple parts or product styles
WL   Q jTcj
j
WL
n
AT
n= number of workstations
AT= available time on one station in the period (hr/period)
Factors Complicating the Computation of
1. Setup time in batch production
2. Availability
3. Utilization
4. Defect rate
Availability and Utilization
AT  H sh AU
AT= available time
Hsh= shift hours during the period (hr)
A= availability
U= utilization
Defect Rate
Defect rate is the fraction of parts produced that are defective.
Q  Qo  1  q 
Q= quantity of good units made in the process
Qo= original or starting quantity
q= fraction defect rate
QTc
WL 
 1 q
Machine Clusters
A machine cluster is a collection of two or more machines producing

parts or products with identical cycle times and serviced (usually
loaded and unloaded) by one worker.
Conditions to organize a collection of machines into a machine cluster:
1. The semi-automatic machine cycle must be long relative to the service
portion of the cycle that requires the worker’s attention.
2. The cycle time must be the same for all machines.
3. The machines that the worker would service must be located in close
enough proximity to allow time to walk between them.
4. The work rules of the plant must permit a worker to service more than
one machine.
Machine Clusters
Let Tc  Tm  Ts
The time required for the operator to service one machine is
Ts  Tr
where Tr is repositioning time.
The time to service n machines is
n  Ts  Tr 
For a perfectly balanced system, assuming one work unit is
produced by each machine during a cycle:
n  Ts  Tr   Tm  Ts
Machine Clusters
Tm  Ts
n
Ts  Tr
n may not be integer.
 Tm  Ts   Tm  Ts 
Let n1    and n2   
 Ts  Tr   Ts  Tr 
n1 : the operator has idle time  Tc  Tm  Ts 
n2 : the machines have idle time  Tc  n2  Ts  Tr  
Machine Clusters
Let CL  labor cost rate and Cm  machine cost rate

The cost per work unit
 CL 
C pc  n1     Cm   Tm  Ts 
 n1 
C pc  n2    CL  Cm n2   Ts  Tr 
Select the case with lower cost per unit.
In the absence of cost data, use n1. Machine idle time
costs more than worker idle time.

CH 14 Single-Station Manufacturing Cells

Uploaded by

Copyright:

Available Formats

CH 14 Single-Station Manufacturing Cells

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CH 14 Single-Station Manufacturing Cells

Uploaded by

Copyright:

Available Formats

Ch 14

Single-Station Manufacturing Cells

 Most common manufacturing system in industry

 How many workstations are required to satisfy production

A machine cluster is a collection of two or more identical or

“One worker tending one production machine (most

“Fully automated production machine capable of

 Typical objectives in defining the desired parts storage capacity

 Example: two-position automatic pallet changer (APC)

Machine tool capable of performing multiple operations that use

Machine tool capable of performing multiple operations on a

Stamping press on automatic cycle producing stampings from

Machine tool capable of performing multiple operations either with

Example part with turned, milled, and drilled features

 No of single stations required to satisfy specified production

 No of machines to assign to a worker in a machine cluster

1. Determine the total workload that must be accomplished in a

If there are multiple parts or product styles

Defect rate is the fraction of parts produced that are defective.

A machine cluster is a collection of two or more machines producing

Let CL  labor cost rate and Cm  machine cost rate

You might also like