Excitation & Propulsion Control
Excitation & Propulsion Control
Excitation & Propulsion Control
Control
Excitation control
Generates modulated PWM signal based on traction
requirement.
Engine & Loco Propulsion control
Control engine based on drivers request.
Controls loco movement based on drivers request.
MCBG communication
Receives data from MCBG for display and control.
Loco Configuration
Configure the MEP software to suit the type of loco.
Digital input Vs output function
Controls the output devices based on input signals as per
the software logic.
1
Excitation & Propulsion
Control
EP analog input measurements
Monitor Excitation related analog input signals and take
appropriate action.
Engine speed calculation and monitoring
Receive engine speed signal from MWSCC card and control
GHP proportionately to speed based on type of loco.
EP related faults diagnosis
Generates EP related faults based on the fault conditions.
2
Excitation & Propulsion
Control
Communicates with other control cards
1. WS related faults are sent to MEPCC card to get time
stamp from MAUCC card.
2. MEPCC card send these WS related faults as well as
internal generated EP related faults to MAUCC card for
time stamp.
3. MAUCC card provide time stamp and send these faults
along with its internal AU related faults also to MEPCC
card and to display.
4. MEPCC card send this fault to MWSCC card once again for
recording.
1
MEPCC MWSCC
4
2 3
MAUCC 3 Display