CIM MC1707: BY: Nikhil Vivek Shrivas Department of Mechatronics Manipal University Jaipur
CIM MC1707: BY: Nikhil Vivek Shrivas Department of Mechatronics Manipal University Jaipur
CIM MC1707: BY: Nikhil Vivek Shrivas Department of Mechatronics Manipal University Jaipur
Lecture 1
BY:
NIKHIL VIVEK SHRIVAS
DEPARTMENT OF MECHATRONICS
MANIPAL UNIVERSITY JAIPUR
Introduction to
Production process
and NC machines
Production
systems
the factory, production machines and tooling, material handling
equipment, inspection equipment, and computer systems that
control the manufacturing operations.
Facilities also include the plant layout, which is the way the
equipment is physically arranged in the factory.
The equipment is usually organized into manufacturing systems,
which are the logical groupings of equipment and workers that
Facilities accomplish the processing
Figure: Three categories of manufacturing systems: (a) manual work system, (b) worker-machine system,
and (c) fully automated system.
Manufacturing support involves a sequence of activities
The activities consist of four functions that include much
information flow and data processing:
(1) business functions, (2) product design, (3) manufacturing
planning, and (4) manufacturing control
Manufacturing
support
systems
Components
of NC Machine
It is a step by step
direction for
performing the
operation of the
Program of machine tool.
instructions It uses various input
media like 25 mm
Wider Paper Tape,
Magnetic Tape, and
Punched Card for
storing the programs.
It reads the program of instructions and translates into
machine tool mechanical actions.
It has various elements such as tape reader, data buffer,
MCU (Machine signal output channels, feedback channels, sequence
control unit, and a control panel.
Control Unit)
It is the
important
part in a NC
machine.
It comprises
slides,
worktables,
and spindle
including
individual
Machine Tool servo
motors and
controls.
A part programming is a set of instructions with coordinate values
to specify the work of a tool in order to get the preferred machining
form. The different methods of creating part programs are:
Manual Part Programming
Part Program Voice Programming
Computer Aided Part Programming
MDI Programming (Manual Data Input)
Graphic NC Programming
Create the required part program
Place the work piece on the table
By the use of control panel buttons, the tools and slides can be
moved with reference to work piece. Place it at zero position of
work piece.
Working of NC Place the tape in the tape reader
machine Now by pressing the appropriate control panel, it reads the data in
first block in the tape into data buffer
After the reading of data in first block, the control signals are
given to machine tool and operation is started
Next it reads the data in second block and the operation continues
Corrections are done if it is necessary
Flexibility with accuracy
Repeatability