BEE Module 5part 2

Complex Numbers
Module 5
Engr. RODEL A. TEJADA
Intended Learning Outcomes:
1. Understand complex number
2. Familiarize with the basic complex number operations.
Complex Numbers and Phasors
The mathematics used in
Electrical Engineering to add
together resistances, currents or
DC voltages use what are called
“real numbers” used as either
integers or as fractions.
In electrical engineering this type of number is called an
“imaginary number” and to distinguish an imaginary number from a
real number the letter “ j ” known commonly in electrical engineering
as the j-operator, is used. Thus the letter “j” is placed in front of a
real number to signify its imaginary number operation.
• Examples of imaginary numbers are: j3, j12, j100 etc. Then
a complex number consists of two distinct but very much related
parts, a “ Real Number ” plus an “ Imaginary Number ”.
Complex Numbers represent points in a two dimensional
complex or s-plane that are referenced to two distinct axes. The
horizontal axis is called the “real axis” while the vertical axis is
called the “imaginary axis”. The real and imaginary parts of a
complex number are abbreviated as Re(z) and Im(z), respectively.
Complex numbers that are made up of real (the active
component) and imaginary (the reactive component) numbers can
be added, subtracted and used in exactly the same way as
elementary algebra is used to analyse DC Circuits.
The rules and laws used in mathematics for the addition or
subtraction of imaginary numbers are the same as for real
numbers, j2 + j4 = j6 etc. The only difference is in multiplication
because two imaginary numbers multiplied together becomes a
negative real number. Real numbers can also be thought of as a
complex number but with a zero imaginary part labelled j0.
The j-operator has a value exactly equal to √-1, so
successive multiplication of “ j “, ( j x j ) will result in j having
the following values of, -1, -j and +1. As the j-operator is
commonly used to indicate the anticlockwise rotation of a vector,
each successive multiplication or power of “ j “, j2, j3 etc, will
force the vector to rotate through a fixed angle of 90o in an
anticlockwise direction as shown below. Likewise, if the
multiplication of the vector results in a -j operator then the
phase shift will be -90o, i.e. a clockwise rotation.
Vector Rotation of the j-operator
So by multiplying an imaginary
number by j2 will rotate the vector
by 180o anticlockwise, multiplying
by j3 rotates it 270o and by j4 rotates
it 360o or back to its original position.
Multiplication by j10 or by j30 will cause
the vector to rotate anticlockwise by the
appropriate amount. In each successive
rotation, the magnitude of the vector
always remains the same.
Complex Numbers using the Rectangular Form
We saw that a complex number is represented by a real part and
an imaginary part that takes the generalized form of:
• Where:
• Z - is the Complex Number representing the Vector
• x - is the Real part or the Active component
• y - is the Imaginary part or the Reactive component
• j - is defined by √-1
Addition and Subtraction of Complex Numbers
The addition or subtraction of
complex numbers can be done
either mathematically or graphically
in rectangular form. For addition,
the real parts are firstly added
together to form the real part of the
sum, and then the imaginary parts to
form the imaginary part of the sum
and this process is as follows using
two complex numbers A and B as
examples.
Addition and Subtraction of Complex Numbers
Multiplication and Division of Complex Numbers
The multiplication of complex
numbers in the rectangular form
follows more or less the same
rules as for normal algebra along
with some additional rules for the
successive multiplication of the j-
operator where: j2 = -1. So for
example, multiplying together our
two vectors from right
of A = 4 + j1 and B = 2 + j3 will
give us the following result.
The Complex Conjugate
The Complex Conjugate, or simply Conjugate of a complex number
is found by reversing the algebraic sign of the complex numbers
imaginary number only while keeping the algebraic sign of the real
number the same and to identify the complex conjugate of z the
symbol z is used. For example, the conjugate of z = 6 + j4 is z = 6 – j4,
likewise the conjugate of z = 6 – j4 is z = 6 + j4.
The points on the Argand diagram for a complex conjugate have the
same horizontal position on the real axis as the original complex number,
but opposite vertical positions. Thus, complex conjugates can be thought
of as a reflection of a complex number. The following example shows a
complex number, 6 + j4 and its conjugate in the complex plane.
Multiplication and Division of Complex Numbers
Mathematically, the division of
complex numbers in rectangular form is
a little more difficult to perform as it
requires the use of the denominators
conjugate function to convert the
denominator of the equation into a real
number. This is called “rationalising”.
Then the division of complex numbers
is best carried out using “Polar Form”,
which we will look at later. However, as
an example in rectangular form lets find
the value of vector A divided by
vector B.
The Complex Conjugate
The sum of a complex number and its
complex conjugate will always be a real
number as we have seen above. Then the
addition of a complex number and its
conjugate gives the result as a real number
or active component only, while their
subtraction gives an imaginary number or
reactive component only. The conjugate of
a complex number is an important element
used in Electrical Engineering to
determine the apparent power of an AC
circuit using rectangular form
Converting Rectangular Form into Polar Form, ( R→P )
Converting between Rectangular Form and Polar Form
In the rectangular form we can
express a vector in terms of its
rectangular coordinates, with the
horizontal axis being its real axis and
the vertical axis being its imaginary
axis or j-component. In polar form
these real and imaginary axes are
simply represented by “A ∠θ“. Then
using our example above, the
relationship between rectangular form
and polar form can be defined as.
Polar Form Multiplication and Division
Rectangular form is best for adding and subtracting complex
numbers as we saw above, but polar form is often better for
multiplying and dividing. To multiply together two vectors in
polar form, we must first multiply together the two modulus or
magnitudes and then add together their angles.
Multiplication in Polar Form
Multiplying together 6 ∠30o and 8 ∠– 45o in polar form gives us.

Division in Polar Form
Likewise, to divide together two vectors in polar form, we must
divide the two modulus and then subtract their angles as shown.
Fortunately today’s modern scientific calculators have built in

mathematical functions (check your book) that allows for the easy
conversion of rectangular to polar form, ( R → P ) and back from
polar to rectangular form, ( R → P ).

BEE Module 5part 2

Uploaded by

Copyright:

Available Formats

BEE Module 5part 2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BEE Module 5part 2

Uploaded by

Copyright:

Available Formats

Complex Numbers

Multiplying together 6 ∠30o and 8 ∠– 45o in polar form gives us.

Fortunately today’s modern scientific calculators have built in

You might also like