Welding
Welding
Welding
Electroslag MIG
High Energy Beam TIG
ELECTRODE COATING
CORE WIRE
WELDING ATMOSPHERE
ARC STREAM
ARC POOL
SOLIDIFIED SLAG
PENETRATION
DEPTH
WELD
BASE METAL
Weld Metal Protection
• During fusion welding, the molten metal in the
weld “puddle” is susceptible to oxidation
• Must protect weld puddle (arc pool) from the
atmosphere
• Methods
• Weld Fluxes
• Inert Gases
• Vacuum
Weld Fluxes
• Typical fluxes
• SiO2, TiO2, FeO, MgO, Al2O3
• Produces a gaseous shield to prevent
contamination
• Act as scavengers to reduce oxides
• Add alloying elements to the weld
• Influence shape of weld bead during
solidification
Inert Gases
• Argon, helium, nitrogen, and carbon
dioxide
• Form a protective envelope around the
weld area
• Used in
• MIG
• TIG
• Shield Metal Arc
Vacuum
• Produce high-quality welds
• Used in electron beam welding
• Nuclear/special metal applications
• Zr, Hf, Ti
• Reduces impurities by a factor of 20
versus other methods
• Expensive and time-consuming
Types of Fusion Welding
• Oxyacetylene Cutting/Welding
• Shielded Metal Arc (“Stick”)
• Metal Inert Gas (MIG)
• Tungsten Inert Gas (TIG)
Oxyacetylene Welding
• Flame formed by burning a mix of acetylene
(C2H2) and oxygen
POWER
SOURCE
++ ++
SHIELDING GAS ARC COLUMN ---
FLAT
HORIZONTAL
OVERHEAD
VERTICAL
Weld Defects
• Undercuts/Overlaps
• Grain Growth
• A wide T will exist between base metal and HAZ.
Preheating and cooling methods will affect the brittleness of
the metal in this region
• Blowholes
• Are cavities caused by gas entrapment during the
solidification of the weld puddle. Prevented by proper weld
technique (even temperature and speed)
Weld Defects
• Inclusions
• Impurities or foreign substances which are forced into the weld
puddle during the welding process. Has the same effect as a
crack. Prevented by proper technique/cleanliness.
• Segregation
• Condition where some regions of the metal are enriched with an
alloy ingredient and others aren’t. Can be prevented by proper heat
treatment and cooling.
• Porosity
• The formation of tiny pinholes generated by atmospheric
contamination. Prevented by keeping a protective shield over the
molten weld puddle.
Residual Stresses
• Rapid heating and cooling results in thermal stresses
detrimental to joint strength.
• Prevention
• Edge Preparation/Alignment – beveled edges and space
between components to allow movement
• Control of heat input – skip or intermittent weld technique
• Preheating – reduces expansion/contraction forces (alloys)
and removes moisture from the surface
• Peening – help metal stretch as it cools by hitting with a
hammer. Use with care since it may work harden the metal
• Heat Treatment – “soak” the metal at a high temperature to
relieve stresses
• Jigs and Fixtures – prevent distortion by holding metal fixed
• Number of Passes – the fewer the better.
Joint Design
BUTT JOINT
FILLET JOINT
STRAP JOINT
CORNER JOINT
LAP JOINT
Generalized Welding Symbol
1/2
1/2” 1/2”
Weld Symbols (Butt Joints)
Backing
Weld Symbol (Fillet Joints)
Weld Symbol (Corner Joints)