Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Field Visit Report

    Uploaded by

    Hemanth gowda
    1. The document summarizes a field visit by civil engineering students to an RMC plant. 2. The visit included observing the raw material storage, concrete mixing process, and filled transit mixtures. 3. Key activities observed were the automated filling of aggregates, cement, and fly ash into the mixer from storage bins using conveyors and pressure systems, and the mixing and filling of concrete into transit trucks.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Field Visit Report

    Uploaded by

    Hemanth gowda
    30 views13 pages
    1. The document summarizes a field visit by civil engineering students to an RMC plant. 2. The visit included observing the raw material storage, concrete mixing process, and filled transit mixtures. 3. Key activities observed were the automated filling of aggregates, cement, and fly ash into the mixer from storage bins using conveyors and pressure systems, and the mixing and filling of concrete into transit trucks.

    Original Description:

    Field visit ppt in civil engineering Btech. Field visit was conducted on RMC plant.

    Original Title

    Field visit report

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document summarizes a field visit by civil engineering students to an RMC plant. 2. The visit included observing the raw material storage, concrete mixing process, and filled transit mixtures. 3. Key activities observed were the automated filling of aggregates, cement, and fly ash into the mixer from storage bins using conveyors and pressure systems, and the mixing and filling of concrete into transit trucks.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    30 views13 pages

    Field Visit Report

    Uploaded by

    Hemanth gowda
    1. The document summarizes a field visit by civil engineering students to an RMC plant. 2. The visit included observing the raw material storage, concrete mixing process, and filled transit mixtures. 3. Key activities observed were the automated filling of aggregates, cement, and fly ash into the mixer from storage bins using conveyors and pressure systems, and the mixing and filling of concrete into transit trucks.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    You are on page 1of 13

    FIELD VISIT PRESENTATION

    NAME : K HANUMANTHA PRASAD


    SRN : R20CV818

    D AT E O F V I S I T: 0 7 / 1 0 / 2 0 2 2 - 1 8 - 1 1 - 2 0 2 2
    CONTENTS

    • General Information of the site


    • Major activities
    • Micro activities
    • Observation of the student at site
    • General information of the RMC site.
    • Major and Minor activities of RMC Plant.
    • Observation of student of the Site.

    2
    GENERAL INFORMATION OF THE SITE

    Site is located at the 5th floor of SIR M VISHVESWARAYYA BLOCK, REVA UNIVERSITY. It is
    a roof terrace and is an open, wide, flat area over that building. The flat roof is made of reinforced
    concrete with a 3 feet full brick wall construction as a parapet wall above the roof, along the edge of
    roof that surrounding its perimeter,
    extension of exterior wall. 

    3
    MAJOR ACTIVITIES

    1. Erection of new columns to increase the height of


    that building so has to include additional floors
    2. The retrofitting techniques are used to raise the
    columns / piers on this existing building.

    4
    MINOR ACTIVITIES

     There are markings with respect to all the points to add columns. 

     The wall is cut carefully up to the beam level. 

     Concrete at the roof beam level is hacked and removed to expose the reinforcements.

    5
    OBSERVATION

    1.  It was observed that Built-up members were used in many structures, such as compression
    members of supporting columns.

    2. They are composed from two rolled U-sections or four rolled angles. The distance between
    them were fixed by lacing or battening. And thus, 

    3. It was noticed that T - section and square section of steel are used. 

    6
    GENERAL INFORMATION OF THE SITE

    1. On 18 November 2022, a visit was organized by the


    Department of Civil Engineering for the students of IV year.
    The students along with 2 faculties, Prof. Srinidhi S U, Dr
    Sumanth Kulkarni went on a visit to IS INFRA CONMIX
    RMC plant Kannuru, Banglore.

    2. As the part of Pre-Activity for this visit, a session was taken


    by the faculty on the same day before the visit on “Concrete
    manufacturing process and Ready-mix concrete” that students
    need to understand while visiting the Plant.

    3. IS INFRA CONMIX RMC (Ready mix concrete supplier in


    Karnataka), Kannuru, Bengaluru.

    7
    MAJOR ACTIVITIES:

    1. The raw material such as sand, aggregate is filled in the shallow


    vessels, the cement is stored in the two of the three large
    cylindrical bins i.e., in first and last bins, cement is stored and
    in middle silos fly ash is stored. The aggregates used in the mix
    were of 20 mm and 10 mm at plant according to the
    requirement. The aggregate and sand move up with the help of
    a conveyor belt and the cement and fly ash were pressurized
    upward from downward with the help of air pressure.

    8
    The mix sand and aggregate are filled
    automatically in the bucket and reach upward to the
    mixture with the help of pulley system, All the
    ingredients of the ready-mix concrete are the mixed and
    filled in the Transits.

    Admixtures are mixing either during


    the mixing process or it after reaching the site and the
    admixture taken in use in plant is super-plasticizers
    which enhance the workability and setting of the
    concrete.

    9
    MINOR ACTIVITIES 

    1. The capacity of the plant of making mix in one time is (0.5 cubic meter) and the
    capacity of the Transit Mixture is 7 cubic meters. It takes up to 20-25 minutes to
    fill one Transit Mixture of 7 cubic meter. The plant is completely based on
    software working system which is regulatory under the observation of Operator.
    Operator simply fills the data on the software according to requirement of the
    client and the machines starts working accordingly.

    10
    OBSERVATION OF THE STUDENT AT SITE

    Variety sizes of aggregates were


    procured. As per the requirement the
    aggregates will be used.

    GGBS storage procedure was


    observed. All the basic tests conducted on
    the concrete were observed.

    11
    12
    THANK YOU

    You might also like