Siemens

SIEMENS
BETA GUARD
MINIATURE CIRCUIT BREAKERS
(5SP4)
The first characteristic is the overload which is intended to prevent the accidental overloading of the cable in a no fault situation. The speed of the MCB tripping will vary with the degree of the overload. This is usually achieved by the use of a thermal device in the MCB The second characteristic is the magnetic fault protection, which is intended to operate when the fault reaches a predetermined level and to trip the MCB within one tenth of a second.
The level of this magnetic trip gives the MCB its type characteristic as follows: - Type B - trips between 3 and 5 time full load current Type C - trips between 5 and 10 times full load current Type D - trips between 10 and 20 times full load current
Betagard is available with C and D- tripping character with current range from 80A-125A and 80A-100A respectively Features Current limiting class 3 MCB S Finger touch proof terminals Suitable for AC /DC circuits Accessories like auxiliary contact ,shunt trip, under voltage release, fault signal contact
APPLICATIONS
Mainly as incomer MCB in residential applications C characteristics MCB suitable for general line protection especially with higher starting current lamps, motors etc D characteristics MCB s suitable for high inrush current applications line transformers generating significant pulses ect
TECHNICAL SPECIFICATIONS
Standards IS 8828(1996),IEC 608898,DIN VDE 0641 Series: 5sp4 Tripping character : C and D Current range:80A,100A,125A Poles: sp,dp,tp,fp
SELECTION AND ORDERING DATA

Pole 1pole 2 pole A 80,100,125 80,100,125 MW* 1.5 3 Characters Both C an D Both C and D
3pole
4 pole
80,100,125
80,100,125
4.5
6
Both C and D
Both C and D
AUXILIARY CONTACT
Applications Remotely indicating the switching condition of MCB on/off Mounted individually to MCB with factory fitted clips.
SHUNT TRIPS
Remotely tripping the MCB Can be mounted individually
FAULT SIGNAL CONTACT

Remotely indicating the tripping condition of MCB Can be mounted individually to MCB
UNDER VOLTAGE RELEASE

Tripping of MCB in case of interruption or insufficient voltage Can be mounted individually Prevents MCB from switching ON in the event of interruption or insufficient voltage.
BETAGARD 5SX4 MCB S

Betagard 5sx4 range of MCBs have rated breaking capacity of 10kA. Comply to the latest national and international standards with current ratings from0.5Ato 63A Standards According to IS8828(1996),IEC 60898(1995) VDE 0641/6.78
RESIDUAL
CURRENT BREAKER OPERATOR
A residual current circuit breaker (RCCB) combines the functions of over current protection and leakage detection. They are not intended to provide protection against overload or short-circuit conditions.
TYPES OF RESIDUAL CURRENT PROTECTIVE

DEVICES
Type AC Type A
Type AC: Residual current protective devices of type is suitable only for detecting Sinusoidal AC residual currents.
Type A Type A measure pulsating DC residual currents in addition to AC sinusoidal currents.e.g applications like ECGs,washing machine etc.
BETAGARD RCOS
Combination devices which offer over current protection for overload short circuit protection in addition to protection against residual currents. A version in this device group is a residual current block combined to a miniature circuit breaker to form RCBO.
Betagard RCBOs are available in 4 standard versions from 32 A-63A.they offer 10kA breaking capcity as per IS8828 IN 2P and 4P versions
4 STANDARD VERSIONS
MCB C characteristics with RC unit type AC MCB C characteristics with RC unit type A MCB D characteristics with RC unit type AC MCB D characteristics with RC unit type A
TECHNICAL SPECIFICATIONS
Standards Poles : IS 12640-2(2001),IEC 61009 :2P/4p
Tripping characters : C and D
BETAGARD DISTRIBUTION BOARDS
Distribution board: A distribution board (or panel board) is a component of an electricity supply system which divides an electrical power feed into subsidiary circuits, while providing a protective fuse or circuit breaker for each circuit, in a common enclosure.
BETAGARD DBS
5 DBs Flush as well as surface type available from 4way to 12 way in double door version. Beta flex DBs Beta bus DBs Beta bus plus DBs Beta multi DBs Beta change over DB s
Beta flex: offered in row system and are available in 12 and 16 row design Beta bus: vertical ready made insulated bus bar available with 4 w/6w/8w Beta multi :special feature for accommodating Siemens 3vf/3vl/3vt MCCB. Beta multi DBs:special feature for accommodating TV socket and tel crone connector apart from LV power distribution.
Beta change over DBs : designed to cater to few specific requirement of regions where in the consistent availability 3 phase supply are not reliable.
BETA FLEX DB(8GB31)-2 ROW
Recommended for residential and commercial buildings where in mounting of modular devices like timers ammeters are to be connected in the outgoing circuit
BETA FLEX DB (8GB31) 4 ROWS SYSTEM
Highly recommended for commercial buildings where in total number of circuits are considerably more.
BETAGARD SPN DB (8 GB31) WITH OR WITHOUT TV

SPLITTER AND KRONE TYPE TELE SOCKET
Recommended for single phase power distribution work TV and telephone in one location .
BETAGARD TPN(8GB31) WITH OR WITHOUT TV

SPLITTER AND KRONE TYPE TELEPHONE SOCKET
Recommended for 3 phase power distribution network.
BETA BUS DB(8GB31)
Recommended where ever TP/SP MCBs are to be mounted in the outgoing circuits.
BETA BUS PLUS DB WITH VERTICAL BUS BAR(8GB31)
Highly recommended and where ever MCB as incomer up to 160 and TP/SP MCB s are to mounted in the outgoing circuits.
BETA PHASE CHANGE OVER DB (8GB31)
Recommended where ever the reliability of 3 phase supplies are not dependable.
DELTA VEGA
MODULAR SWITCHES ISI marked as per IS 3854:1997 Suitable upto250 AC Unique double rocker design Available in 3 colors Metallic carbon Metallic aluminum Snow white
SOCKETS Safety shutters for all type sockets Variety of sockets available up to 25A Sockets are ISI marked as per IS 1293:2005 All sockets are tested as per IEC 60884-1 Sockets are available up to 250 V AC
ACCESSORIES
360 degree rotating knob for fan step regulator ensures no more knob breakage. Telephone socket is suitable for two line instrument. Uniform illuminating neon indicator for phase induction
HOSPITALITY RANGE
Complete range for hotel application Shaver socket for 110V and 240V operations Hotel card switch with time delay Movement and smoke detectors which help energy saving and fire safety.

Siemens

Uploaded by

Copyright:

Available Formats

Siemens

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Siemens

Uploaded by

Copyright:

Available Formats

SIEMENS

SELECTION AND ORDERING DATA

FAULT SIGNAL CONTACT

UNDER VOLTAGE RELEASE

BETAGARD 5SX4 MCB S

CURRENT BREAKER OPERATOR

TYPES OF RESIDUAL CURRENT PROTECTIVE

Tripping characters : C and D

BETAGARD DISTRIBUTION BOARDS

BETA FLEX DB(8GB31)-2 ROW

BETA FLEX DB (8GB31) 4 ROWS SYSTEM

BETAGARD SPN DB (8 GB31) WITH OR WITHOUT TV

BETAGARD TPN(8GB31) WITH OR WITHOUT TV

Recommended for 3 phase power distribution network.

BETA BUS DB(8GB31)

BETA BUS PLUS DB WITH VERTICAL BUS BAR(8GB31)

BETA PHASE CHANGE OVER DB (8GB31)

You might also like