09 - Instruction Sets Characteristics

Chapter 09
Instruction Sets:
Characteristics and Functions
What is an Instruction Set?
• The complete collection of instructions
that are understood by a CPU
• Machine Code
• Binary
• Usually represented by assembly codes
Elements of an Instruction
• Operation code (Op code)
—Do this
• Source Operand reference
—To this
• Result Operand reference
—Put the answer here
• Next Instruction Reference
—When you have done that, do this...
Where have all the Operands Gone?
• Long time passing….
• (If you don’t understand, you’re too
young!)
• Main memory (or virtual memory or
cache)
• CPU register
• I/O device
Instruction Cycle State Diagram
Instruction Representation
• In machine code each instruction has a
unique bit pattern
• For human consumption (well,
programmers anyway) a symbolic
representation is used
—e.g. ADD, SUB, LOAD
• Operands can also be represented in this
way
—ADD A,B
Simple Instruction Format
Instruction Types
• Data processing
• Data storage (main memory)
• Data movement (I/O)
• Program flow control
Number of Addresses (a)
• 3 addresses
—Operand 1, Operand 2, Result
—a = b + c;
—May be a forth - next instruction (usually
implicit)
—Not common
—Needs very long words to hold everything
Number of Addresses (b)
• 2 addresses
—One address doubles as operand and result
—a = a + b
—Reduces length of instruction
—Requires some extra work
– Temporary storage to hold some results
Number of Addresses (c)
• 1 address
—Implicit second address
—Usually a register (accumulator)
—Common on early machines
Number of Addresses (d)
• 0 (zero) addresses
—All addresses implicit
—Uses a stack
—e.g. push a
— push b
— add
— pop c
—c = a + b
How Many Addresses
• More addresses
—More complex (powerful?) instructions
—More registers
– Inter-register operations are quicker
—Fewer instructions per program
• Fewer addresses
—Less complex (powerful?) instructions
—More instructions per program
—Faster fetch/execution of instructions
Design Decisions (1)
• Operation repertoire
—How many ops?
—What can they do?
—How complex are they?
• Data types
• Instruction formats
—Length of op code field
—Number of addresses
Design Decisions (2)
• Registers
—Number of CPU registers available
—Which operations can be performed on which
registers?
• Addressing modes (later…)
• RISC v CISC
Types of Operand
• Addresses
• Numbers
—Integer/floating point
• Characters
—ASCII etc.
• Logical Data
—Bits or flags
• (Aside: Is there any difference between numbers and
characters? Ask a C programmer!)
x86 Data Types
• 8 bit Byte
• 16 bit word
• 32 bit double word
• 64 bit quad word
• 128 bit double quadword
• Addressing is by 8 bit unit
• Words do not need to align at even-
numbered address
• Data accessed across 32 bit bus in units of
double word read at addresses divisible by
4
• Little endian
SMID Data Types
• Integer types
— Interpreted as bit field or integer
• Packed byte and packed byte integer

— Bytes packed into 64-bit quadword or 128-bit double
quadword
• Packed word and packed word integer
— 16-bit words packed into 64-bit quadword or 128-bit double
quadword
• Packed doubleword and packed doubleword integer
— 32-bit doublewords packed into 64-bit quadword or 128-bit
double quadword
• Packed quadword and packed qaudword integer
— Two 64-bit quadwords packed into 128-bit double quadword
• Packed single-precision floating-point and packed double-

precision floating-point
— Four 32-bit floating-point or two 64-bit floating-point values
packed into a 128-bit double quadword
x86 Numeric Data Formats
ARM Data Types
• 8 (byte), 16 (halfword), 32 (word) bits
• Halfword and word accesses should be word aligned
• Nonaligned access alternatives
— Default
– Treated as truncated
– Bits[1:0] treated as zero for word
– Bit[0] treated as zero for halfword
– Load single word instructions rotate right word aligned data transferred by
non word-aligned address one, two or three bytesAlignment checking
— Data abort signal indicates alignment fault for attempting unaligned
access
— Unaligned access
— Processor uses one or more memory accesses to generate transfer of
adjacent bytes transparently to the programmer
• Unsigned integer interpretation supported for all types
• Twos-complement signed integer interpretation supported for all
types
• Majority of implementations do not provide floating-point
hardware
— Saves power and area
— Floating-point arithmetic implemented in software
— Optional floating-point coprocessor
— Single- and double-precision IEEE 754 floating point data types
ARM Endian Support
• E-bit in system control register
• Under program control
Types of Operation
• Data Transfer
• Arithmetic
• Logical
• Conversion
• I/O
• System Control
• Transfer of Control
Data Transfer
• Specify
—Source
—Destination
—Amount of data
• May be different instructions for different
movements
—e.g. IBM 370
• Or one instruction and different addresses
—e.g. VAX
Arithmetic
• Add, Subtract, Multiply, Divide
• Signed Integer
• Floating point ?
• May include
—Increment (a++)
—Decrement (a--)
—Negate (-a)
Shift and Rotate Operations
Logical
• Bitwise operations
• AND, OR, NOT
Conversion
• E.g. Binary to Decimal
Input/Output
• May be specific instructions
• May be done using data movement
instructions (memory mapped)
• May be done by a separate controller
(DMA)
Systems Control
• Privileged instructions
• CPU needs to be in specific state
—Ring 0 on 80386+
—Kernel mode
• For operating systems use
Transfer of Control
• Branch
—e.g. branch to x if result is zero
• Skip
—e.g. increment and skip if zero
—ISZ Register1
—Branch xxxx
—ADD A
• Subroutine call
—c.f. interrupt call
Branch Instruction
Nested Procedure Calls
Use of Stack
Stack Frame Growth Using Sample
Procedures P and Q
Exercise For Reader
• Find out about instruction set for Pentium
and ARM
• Start with Stallings
• Visit web sites
Byte Order
(A portion of chips?)
• What order do we read numbers that
occupy more than one byte
• e.g. (numbers in hex to make it easy to
read)
• 12345678 can be stored in 4x8bit
locations as follows
Byte Order (example)
• Address Value (1) Value(2)
• 184 12 78
• 185 34 56
• 186 56 34
• 186 78 12
• i.e. read top down or bottom up?

Byte Order Names
• The problem is called Endian
• The system on the left has the least
significant byte in the lowest address
• This is called big-endian
• The system on the right has the least
significant byte in the highest address
• This is called little-endian
Example of C Data Structure
Alternative View of Memory Map
Standard…What Standard?
• Pentium (x86), VAX are little-endian
• IBM 370, Moterola 680x0 (Mac), and most
RISC are big-endian
• Internet is big-endian
—Makes writing Internet programs on PC more
awkward!
—WinSock provides htoi and itoh (Host to
Internet & Internet to Host) functions to
convert

09 - Instruction Sets Characteristics

Uploaded by

Copyright:

Available Formats

09 - Instruction Sets Characteristics

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

09 - Instruction Sets Characteristics

Uploaded by

Copyright:

Available Formats

Chapter 09

• Packed byte and packed byte integer

• Packed single-precision floating-point and packed double-

• i.e. read top down or bottom up?

You might also like