Superposition
Superposition
Superposition
Standing waves
Interference
Diffraction
Constructive interference
i.e. yt = y1 + y2 +
Destructive interference
What will the addition (superposition) of these two waves look like?
Harmonic sum
HARMSUM.XLS
1) Same frequency.
2) Phase difference must be constant. 3) Roughly equal amplitude. 4) Transverse waves must be substantially polarised in the same direction.
Standing/Stationary waves.
Are produced when two coherent waves meet, travelling in opposite directions.
Plates Pipe
String
Rods
2) Electron Orbitals
Musical Instruments
All musical instruments produce a standing wave. By the superposition of a wave and its reflection. Particular positions in an instrument can be shown to be Nodes and others to be Antinodes e.g. Closed Pipes Air undergoes longitudinal vibration. Fundamental (1st Harmonic) Wavelength, = 4 x l f = v/ F = v/4l
Another possible wave in this pipe is: What is the wavelength of this wave? What is the frequency of this wave? How does this frequency compare with the frequency of the fundamental?
Stretched Strings
First Harmonic 1) What is the wavelength of this wave? 2) What is the frequency of the 1st Harmonic? N A N
Sketch the next two possible waves in this string and calculate the possible harmonics.
Rods
Travelling
Energy transfer
Adjacent particles Adjacent particles are in phase. not in phase but have constant phase difference. Adjacent particles All particles have have different same amplitude. amplitudes
MOVEWAVE.xls
2 Source Interference
Youngs slits experiment usually with light.
Theory
Wavelength, = ay/d
N.B. 1) y is proportional to 1/a : need a small a (0.5mm) 2) y is proportional to d :- need a large d ( 0.5 5m) 3) y is proportional to wavelength :- the larger the wavelength the greater y
WAVEADD.xls
Measurement of length.
1 metre is defined as:- 1650763.73 wavelengths of a certain line in the line spectrum of Kr. Can use the movement towards each other of two mirrors, counting fringes to measure the standard. an accuracy of 1 in 109 can be achieved. In a similar manner the expansion of a crystal can be measured.
H.W Study and explain the colours of soap bubbles (in a bath?)
If the distance between the slits is d. It can be seen that for constructive interference;
/d = sin
The wavelength of light can be determined accurately using a spectrometer. Typically; Monochromatic light is incident normally on a diffraction grating having 3000 lines/cm. The angular separation of the zero order and the 1st order maxima is 10o. Calculate the wavelength of the incident light.
What colour is this light?
What is the greatest order of diffraction maxima possible in the example above?
Diffraction
Large gap not much observable diffraction; most energy passes straight through gap. Small gap most of the energy is diffracted and passes into the geometric shadow.
Practically:
Theoretically:
Constructive interference
Destructive interference
At P a wavelet from AC will interfere constructively with a wavelet from BC, a bright fringe will occur. At Q, wavelets in AC will all find a wavelet in BC half a wavelength different destructive interference will occur.
And more