4.2 Ieee 802.11

Mobile Computing-
CSC603
Subject Incharge
Ansari Fatima Anees
Assistant Professor
email: fatima.ansari@mhssce.ac.in
4.2
IEEE 802.11
IEEE 802.11
🞂 IEEE 802.11 is a standard for implementing Wireless
LAN.
🞂 This standard belongs to the group of 802.x LAN
standards, e.g., 802.3 Ethernet or 802.5 Token Ring.
🞂 This standard specifies the physical and medium access
layer adapted to the special requirements of wireless
LANs, but offers the same interface as the others to
higher layers to maintain interoperability.
🞂 The primary goal of the standard was the specification
of a simple and robust WLAN which offers time-
bounded and asynchronous services.
IEEE 802.11-System Architecture
🞂 IEEE 802.11 can be configured as infrastructure-based
or ad-hoc network.
Figure :
Architecture of
an
infrastructure-
based IEEE
802.11
🞂 Several nodes, called stations (STAi), are connected
to access points (AP).
🞂 Stations are terminals with access mechanisms to the
wireless medium and radio contact to the AP.
🞂 The stations and the AP which are within the same
radio coverage form a basic service set (BSSi).
🞂 The example shows two BSSs – BSS1 and BSS2 –
which are connected via a distribution system.
🞂 A distribution system connects several BSSs via the AP to form a single
network and thereby extends the wireless coverage area.
🞂 This network is now called an extended service set (ESS) and has its own
identifier, the ESSID.
🞂 The ESSID is the ‘name’ of a network and is used to separate different
networks. Without knowing the ESSID (and assuming no hacking) it should
not be possible to participate in the WLAN.
🞂 The distribution system connects the wireless networks via the APs with a
portal, which forms the interworking unit to other LANs.
🞂 Stations can select an AP and associate with it. The APs
support roaming (i.e., changing access points), the
distribution system handles data transfer between the
different APs.
🞂 APs provide synchronization within a BSS, support
power management, and can control medium access to
support time-bounded service
Figure :
Architecture of
IEEE 802.11 ad-
hoc
wireless LANs
🞂 IEEE 802.11 allows the building of ad-hoc networks
between stations, by forming one or more independent
BSSs (IBSS) .
🞂 An IBSS comprises a group of stations using the same
radio frequency.
🞂 Stations STA1, STA2, and STA3 are in IBSS1,
🞂 STA4 and STA5 in IBSS2. This means for example that
STA3 can communicate directly with STA2 but not
with STA5.
🞂 Several IBSSs can either be formed via the distance
between the IBSSs or by using different carrier
frequencies (then the IBSSs could overlap physically).
🞂 IEEE 802.11 does not specify any special nodes that
support routing, forwarding of data or exchange of
topology
IEEE 802.11-Protocol Architecture
🞂 An IEEE 802.11 fits seamlessly into the other 802.x
standards for wired LANs.
🞂 An IEEE 802.11 wireless LAN connected to a switched
IEEE 802.3 Ethernet via a bridge.
🞂 Applications should not notice any difference apart
from the lower bandwidth and perhaps higher access
time from the wireless LAN.
🞂 The WLAN behaves like a slow wired LAN.
Figure :
IEEE 802.11
protocol architecture
and bridging
🞂 The higher layers (application, TCP, IP) look the same
for wireless nodes as well as wired nodes.
🞂 The upper part of the data link control layer, the logical
link control (LLC), covers the differences of the
medium access control layers needed for the different
media.
🞂 The IEEE 802.11 standard only covers the physical
layer PHY and medium access layer MAC .
🞂 The physical layer is subdivided into the physical
layer convergence protocol (PLCP) and the physical
medium dependent sublayer PMD.
Figure :Detailed IEEE 802.11 protocol architecture and management

🞂 The basic tasks of the MAC layer comprise medium
access, fragmentation of user data, and encryption.
🞂 The PLCP sublayer provides a carrier sense signal,
called clear channel assessment (CCA), and provides a
common PHY service access point (SAP) independent
of the transmission technology.
🞂 The PMD sublayer handles modulation and
encoding/decoding of signals.

4.2 Ieee 802.11

Uploaded by

Copyright:

Available Formats

4.2 Ieee 802.11

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4.2 Ieee 802.11

Uploaded by

Copyright:

Available Formats

Mobile Computing-

Figure :Detailed IEEE 802.11 protocol architecture and management

You might also like