Modeling and Simulation Systems

Lecture-13
Introduction to State Space Modeling & Analysis

Dr. Imtiaz Hussain

email: imtiaz.hussain@faculty.muet.edu.pk
URL :http://imtiazhussainkalwar.weebly.com/
 Lecture Outline
• Introduction to state space
– Basic Definitions
– State Equations
– State Diagram
– State Controllability
– State Observability
– Output Controllability
 Introduction
• Modern control theory is contrasted with conventional
control theory in that the former is applicable to
multiple-input, multiple-output systems, which may be
linear or nonlinear, time invariant or time varying, while
the latter is applicable only to linear time invariant single-
input, single-output systems.
 Definitions
• State of a system: We define the state of a system at time t0 as the
amount of information that must be provided at time t0, which,
together with the input signal u(t) for t  t0, uniquely determine the
output of the system for all t  t0.

• State Variable: The state variables of a dynamic system are the smallest
set of variables that determine the state of the dynamic system.

• State Vector: If n variables are needed to completely describe the

behaviour of the dynamic system then n variables can be considered as
n components of a vector x, such a vector is called state vector.

• State Space: The state space is defined as the n-dimensional space in

which the components of the state vector represents its coordinate
axes.
 Definitions
• Let x1 and x2 are two states variables that define the state
of the system completely .

dx
x2 dt
Velocity State (t=t1)
State (t=t1)

State
Vector
x1 Position
x

Two Dimensional State space State space of a Vehicle

5
 State Space Equations
• In state-space analysis we are concerned with three types of
variables that are involved in the modeling of dynamic systems:
input variables, output variables, and state variables.

• The dynamic system must involve elements that memorize the

values of the input for t> t1 .

• Since integrators in a continuous-time control system serve as

memory devices, the outputs of such integrators can be
considered as the variables that define the internal state of the
dynamic system.

• Thus the outputs of integrators serve as state variables.

• The number of state variables to completely define the dynamics

of the system is equal to the number of integrators involved in the
system.
 State Space Equations
• Assume that a multiple-input, multiple-output system involves
integrators.
• Assume also that there are inputs and outputs .
• Define outputs of the integrators as state variables: .
• Then the system may be described by

˙ 1 ( 𝑡 ) = 𝑓 1 ( 𝑥1 , 𝑥 2 ,⋯ , 𝑥 𝑛 ;𝑢 1 , 𝑢2 , ⋯ ,𝑢 𝑟 ; 𝑡 )
𝑥

˙ 2 ( 𝑡 ) = 𝑓 2 ( 𝑥 1 , 𝑥 2 , ⋯ , 𝑥 𝑛 ; 𝑢1 ,𝑢 2 , ⋯ , 𝑢𝑟 ; 𝑡 )
𝑥

˙ 𝑛 ( 𝑡 )= 𝑓 𝑛 ( 𝑥1 , 𝑥 2 ,⋯ , 𝑥𝑛 ; 𝑢 1 , 𝑢2 , ⋯ ,𝑢 𝑟 ; 𝑡 )
𝑥
 State Space Equations
• The outputs of the system may be given as.
𝑦 1 ( 𝑡 ) =𝑔 1 (𝑥 1 , 𝑥 2 ,⋯ , 𝑥𝑛 ; 𝑢 1 , 𝑢2 ,⋯ ,𝑢𝑟 ; 𝑡 )

𝑦 2 ( 𝑡 )=𝑔 2 ( 𝑥1 , 𝑥2 , ⋯ , 𝑥 𝑛 ; 𝑢1 ,𝑢2 , ⋯ ,𝑢 𝑟 ; 𝑡 )

𝑦 𝑚 ( 𝑡 )=𝑔𝑚 ( 𝑥 1 , 𝑥 2 , ⋯ , 𝑥 𝑛 ; 𝑢1 ,𝑢 2 , ⋯ , 𝑢𝑟 ; 𝑡 )
• If we define

[] [ ]
𝑥1 𝑓 1 ( 𝑥 1 , 𝑥 2 , ⋯ , 𝑥 𝑛 ; 𝑢1 ,𝑢 2 , ⋯ , 𝑢𝑟 ; 𝑡 )

𝒙 ( 𝑡 )=
𝑥2 𝒇 ( 𝒙 , 𝒖 , 𝑡 ) = 𝑓 2 ( 𝑥 1 , 𝑥 2 , ⋯ , 𝑥 𝑛 ; 𝑢1 ,𝑢 2 , ⋯ , 𝑢𝑟 ; 𝑡 )
⋮

[]
⋮
𝑥𝑛 𝑓 𝑛 ( 𝑥1 , 𝑥 2 , ⋯ , 𝑥 𝑛 ; 𝑢1 , 𝑢2 , ⋯ ,𝑢 𝑟 ; 𝑡 ) 𝑢1
𝑢2
𝒖 ( 𝑡 )=
⋮
𝑢𝑟

[] [ ]
𝑦1 𝑔 1( 𝑥 1 , 𝑥 2 ,⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 ,⋯ , 𝑢𝑟 ;𝑡 )
𝑦2
𝒚 (𝑡)= 𝒈 ( 𝒙 , 𝒖 , 𝑡 )= 𝑔 2 ( 𝑥1 , 𝑥 2 ,⋯ , 𝑥 𝑛 ; 𝑢 1 , 𝑢2 , ⋯ ,𝑢 𝑟 ; 𝑡 )
⋮ ⋮
𝑦𝑚 𝑔𝑚 (𝑥 1 , 𝑥 2 ,⋯ , 𝑥𝑛 ; 𝑢 1 , 𝑢2 ,⋯ ,𝑢𝑟 ; 𝑡 )
 State Space Modelling

• State space equations can then be written as

𝒙˙ ( 𝑡 )= 𝒇 ( 𝒙 , 𝒖, 𝑡 ) State Equation

𝒚 ( 𝑡 ) =𝒈 ( 𝒙 ,𝒖 ,𝑡 ) Output Equation

• If vector functions f and/or g involve time t explicitly, then

the system is called a time varying system.
 State Space Modelling
• If above equations are linearised about the operating
state, then we have the following linearised state
equation and output equation:

x (t )  A(t ) x(t )  B (t )u (t ) y (t ) C (t ) x(t )  D(t )u (t )

 State Space Modelling
• If vector functions f and g do not involve time t explicitly then
the system is called a time-invariant system.
• In this case, state and output equations can be simplified to
x (t )  Ax(t )  Bu (t ) y (t ) Cx(t )  Du (t )

B C

A
 Example-1
• Consider the mechanical system shown in figure. We
assume that the system is linear. The external force u(t) is
the input to the system, and the displacement y(t) of the
mass is the output. The displacement y(t) is measured from
the equilibrium position in the absence of the external force.
This system is a single-input, single-output system.

• From the diagram, the system equation is

𝑚 𝑦¨ ( 𝑡 )+𝑏 𝑦˙ (𝑡 )+ 𝑘𝑦 (𝑡 )=𝑢 (𝑡 )

• This system is of second order. This means

that the system involves two integrators.
Let us define state variables and as

𝑥1 ( 𝑡 ) =𝑦 ( 𝑡 )
𝑥 2 ( 𝑡 ) = 𝑦˙ (𝑡 )
 Example-1
𝑥1 ( 𝑡 ) =𝑦 ( 𝑡 ) 𝑥 2 ( 𝑡 ) = 𝑦˙ (𝑡 ) 𝑚 𝑦¨ ( 𝑡 )+𝑏 𝑦˙ (𝑡 )+ 𝑘𝑦 (𝑡 )=𝑢 (𝑡 )

• Then we obtain
𝑥˙ 1 ( 𝑡 ) =𝑥2 (𝑡 )
𝑏 𝑘 1
𝑥˙ 2 ( 𝑡 ) =− 𝑦˙ (𝑡 ) − 𝑦 ( 𝑡 ) + 𝑢 (𝑡 )
𝑚 𝑚 𝑚
• Or
𝑥˙ 1 ( 𝑡 ) =𝑥2 (𝑡 )
𝑏 𝑘 1
𝑥˙ 2 ( 𝑡 ) =− 𝑥2(𝑡 )− 𝑥 1 ( 𝑡 ) + 𝑢(𝑡 )
𝑚 𝑚 𝑚
• The output equation is
𝑦 ( 𝑡 )=𝑥 1 ( 𝑡 )
 Example-1
𝑏 𝑘 1
𝑥˙ 1 ( 𝑡 ) =𝑥2 (𝑡 ) 𝑥˙ 2 ( 𝑡 ) =− 𝑥2(𝑡 )− 𝑥 1 ( 𝑡 ) + 𝑢(𝑡 ) 𝑦 ( 𝑡 )=𝑥 1 ( 𝑡 )
𝑚 𝑚 𝑚

• In a vector-matrix form,

 x 1 (t )   0 1   x (t )   0 
 x (t )   k b   1    1  u (t )
 2   m    x2 (t )  
m  m

 x1 (t ) 
y (t ) 1 0 
x
 2 (t ) 
 Example-1
• State diagram of the system is

𝑥˙ 1 ( 𝑡 ) =𝑥2 (𝑡 )
𝑏 𝑘 1
𝑥˙ 2 ( 𝑡 ) =− 𝑥2(𝑡 )− 𝑥 1 ( 𝑡 ) + 𝑢(𝑡 )
𝑚 𝑚 𝑚

𝑦 ( 𝑡 )=𝑥 1 ( 𝑡 )

-k/m

-b/m
1/m 𝑥
˙2 𝑥1
𝑢(𝑡 ) 1/s 𝑥 = 𝑥 1/s 𝑦 (𝑡 )
2 ˙ 1
 Example-1
• State diagram in signal flow and block diagram format

-k/m

-b/m
1/m 𝑥
˙2 𝑥1
𝑢(𝑡 ) 1/s 𝑥 = 𝑥 1/s 𝑦 (𝑡 )
2 ˙ 1
 Example-2
• State space representation of armature Controlled D.C Motor.
Ra La
B 
ia
ea eb T J

t
stan
= con
Vf
• ea is armature voltage (i.e. input) and  is output.

dia
ea Ra ia  La  eb
dt
T  J  B
 Example-2
T K t ia eb K b

J  B-K t ia 0
dia
La  Ra ia  K b ea
dt
• Choosing as state variables

[ ] [][ ]
0 1 0

[]
𝐾𝑡 0
𝜃 𝐵 𝜃
𝑑 ˙ 0 − ˙ + 0 𝑒𝑎
𝜃 = 𝐽 𝐽 𝜃
𝑑𝑡 1
𝑖𝑎 𝐾 𝑅 𝑖𝑎
0 − 𝑏 − 𝑎 𝐿𝑎
𝐿𝑎 𝐿𝑎
• Since is output of the system therefore output equation is given as

[]
𝜃
𝑦 ( 𝑡 )=[ 1 0 0] 𝜃˙
𝑖𝑎
 State Controllability
• A system is completely controllable if there exists an
unconstrained control u(t) that can transfer any initial
state x(to) to any other desired location x(t) in a finite
time, to ≤ t ≤ T.

uncontrollable

controllable
 State Controllability
• Controllability Matrix CM

CM  B AB A2 B  An  1 B 
• System is said to be state controllable if

rank (CM ) n
 State Controllability (Example)
• Consider the system given below

 1 0   1
x    x   u
 0  3  0
y 1 2x
• State diagram of the system is
U (s ) 1 s -1 x1
1
Y (s )
1
2
 3 x2
s -1
 State Controllability (Example)
• Controllability matrix CM is obtained as
CM B AB 
 1   1
B   AB  
 0  0
• Thus

 1  1
CM  
0 0 
• Since therefore system is not completely state
controllable.
 State Observability
• A system is completely observable if and only if there exists a finite
time T such that the initial state x(0) can be determined from the
observation history y(t) given the control u(t), 0≤ t ≤ T.

observable
unobservable
 State Observability
• Observable Matrix (OM)
 C 
 CA 
 
Observability Matrix OM  CA 2

 
  
 CAn  1 

• The system is said to be completely state observable if

rank (OM ) n
 State Observability (Example)
• Consider the system given below
0 1   0
x   x   u
 0  2  1
y 0 4x

• OM is obtained as
C
OM  
 CA
• Where C 0 4

0 1 
CA 0 4  0  12
 0  2
 State Observability (Example)
• Therefore OM is given as
0 4 
OM  
 0  12 
• Since therefore system is not completely state observable.

U (s ) 1 s -1 x2 s -1 x1 Y (s )

2
 Output Controllability
• Output controllability describes the ability of an external
input to move the output from any initial condition to any
final condition in a finite time interval.

• Output controllability matrix (OCM) is given as


OCM  CB CAB CA 2 B  CA n  1 B 
 Home Work
• Check the state controllability, state observability
and output controllability of the following system

 0 1  0
A   , B    , C 0 1
 1 0  1
To download this lecture visit
http://imtiazhussainkalwar.weebly.com/

END OF LECTURES-13