Modern Control Systems (MCS)

Lecture-13
Introduction to State Space Modeling & Analysis

Dr. Imtiaz Hussain

email: imtiaz.hussain@faculty.muet.edu.pk
URL :http://imtiazhussainkalwar.weebly.com/
 Lecture Outline
• Introduction to state space
– Basic Definitions

– State Equations

– State Diagram

– State Controllability

– State Observability

– Output Controllability
 Introduction
• Modern control theory is contrasted with conventional
control theory in that the former is applicable to
multiple-input, multiple-output systems, which may be
linear or nonlinear, time invariant or time varying, while
the latter is applicable only to linear time invariant single-
input, single-output systems.
 Definitions
• State of a system: We define the state of a system at time t0 as
the amount of information that must be provided at time t0,
which, together with the input signal u(t) for t  t0, uniquely
determine the output of the system for all t  t0.

• State Variable: The state variables of a dynamic system are the

smallest set of variables that determine the state of the
dynamic system.

• State Vector: If n variables are needed to completely describe

the behaviour of the dynamic system then n variables can be
considered as n components of a vector x, such a vector is called
state vector.

• State Space: The state space is defined as the n-dimensional

space in which the components of the state vector represents
its coordinate axes.
 Definitions
• Let x1 and x2 are two states variables that define the state
of the system completely .

dx
x2 dt
Velocity State (t=t1)
State (t=t1)

State
Vector
x1 Position
x

Two Dimensional State space State space of a Vehicle

5
 State Space Equations
• In state-space analysis we are concerned with three types of
variables that are involved in the modeling of dynamic systems:
input variables, output variables, and state variables.

• The dynamic system must involve elements that memorize the

values of the input for t> t1 .

• Since integrators in a continuous-time control system serve as

memory devices, the outputs of such integrators can be
considered as the variables that define the internal state of the
dynamic system.

• Thus the outputs of integrators serve as state variables.

• The number of state variables to completely define the dynamics

of the system is equal to the number of integrators involved in the
system.
 State Space Equations
• Assume that a multiple-input, multiple-output system involves 𝑛
integrators.
• Assume also that there are 𝑟 inputs 𝑢1 𝑡 , 𝑢2 𝑡 , ⋯ , 𝑢𝑟 𝑡 and 𝑚
outputs 𝑦1 𝑡 , 𝑦2 𝑡 , ⋯ , 𝑦𝑚 𝑡 .
• Define 𝑛 outputs of the integrators as state variables:
𝑥1 𝑡 , 𝑥2 𝑡 , ⋯ , 𝑥𝑛 𝑡 .
• Then the system may be described by
𝑥ሶ 1 𝑡 = 𝑓1 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)

𝑥ሶ 2 𝑡 = 𝑓2 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)

𝑥ሶ 𝑛 𝑡 = 𝑓𝑛 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
 State Space Equations
• The outputs 𝑦1 𝑡 , 𝑦2 𝑡 , ⋯ , 𝑦𝑚 𝑡 of the system may be given as.
𝑦1 𝑡 = 𝑔1 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
𝑦2 𝑡 = 𝑔2 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)

𝑦𝑚 𝑡 = 𝑔𝑚 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
• If we define
𝑥1 𝑓1 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
𝑥2 𝑓 (𝑥 , 𝑥 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
𝒙 𝑡 = ⋮ 𝒇 𝒙, 𝒖, 𝑡 = 2 1 2
⋮
𝑢1
𝑥𝑛 𝑓𝑛 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
𝑢2
𝒖 𝑡 = ⋮

𝑦1 𝑢𝑟
𝑔1 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
𝑦2 𝑔2 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
𝒚 𝑡 = ⋮ 𝒈 𝒙, 𝒖, 𝑡 =
⋮
𝑦𝑚 𝑔𝑚 (𝑥1 , 𝑥2 , ⋯ , 𝑥𝑛 ; 𝑢1 , 𝑢2 , ⋯ , 𝑢𝑟 ; 𝑡)
 State Space Modelling

• State space equations can then be written as

𝒙ሶ 𝑡 = 𝒇(𝒙, 𝒖, 𝑡) State Equation

𝒚 𝑡 = 𝒈(𝒙, 𝒖, 𝑡) Output Equation

• If vector functions f and/or g involve time t explicitly, then

the system is called a time varying system.
 State Space Modelling
• If above equations are linearised about the operating
state, then we have the following linearised state
equation and output equation:

x (t )  A(t ) x(t )  B(t )u (t ) y (t )  C (t ) x(t )  D(t )u (t )

 State Space Modelling
• If vector functions f and g do not involve time t explicitly then
the system is called a time-invariant system.

• In this case, state and output equations can be simplified to

x (t )  Ax(t )  Bu (t ) y (t )  Cx(t )  Du (t )

B C

A
 Example-1
• Consider the mechanical system shown in figure. We assume that
the system is linear. The external force u(t) is the input to the
system, and the displacement y(t) of the mass is the output. The
displacement y(t) is measured from the equilibrium position in the
absence of the external force. This system is a single-input, single-
output system.

• From the diagram, the system equation is

𝑚𝑦(𝑡)
ሷ + 𝑏𝑦(𝑡)
ሶ + 𝑘𝑦(𝑡) = 𝑢(𝑡)

• This system is of second order. This means that

the system involves two integrators. Let us
define state variables 𝑥1 (𝑡) and 𝑥2 (𝑡) as

𝑥1 𝑡 = 𝑦(𝑡)
𝑥2 𝑡 = 𝑦(𝑡)
ሶ
 Example-1
𝑥1 𝑡 = 𝑦(𝑡) 𝑥2 𝑡 = 𝑦(𝑡)
ሶ 𝑚𝑦(𝑡)
ሷ + 𝑏𝑦(𝑡)
ሶ + 𝑘𝑦(𝑡) = 𝑢(𝑡)

• Then we obtain
𝑥ሶ 1 𝑡 = 𝑥2 (𝑡)
𝑏 𝑘 1
𝑥ሶ 2 𝑡 = − 𝑦ሶ 𝑡 − 𝑦 𝑡 + 𝑢 (𝑡)
𝑚 𝑚 𝑚
• Or
𝑥ሶ 1 𝑡 = 𝑥2 (𝑡)
𝑏 𝑘 1
𝑥ሶ 2 𝑡 = − 𝑥2 𝑡 − 𝑥1 𝑡 + 𝑢 (𝑡)
𝑚 𝑚 𝑚
• The output equation is
𝑦 𝑡 = 𝑥1 𝑡
 Example-1
𝑏 𝑘 1
𝑥ሶ 1 𝑡 = 𝑥2 (𝑡) 𝑥ሶ 2 𝑡 = − 𝑥2 𝑡 − 𝑥1 𝑡 + 𝑢 (𝑡) 𝑦 𝑡 = 𝑥1 𝑡
𝑚 𝑚 𝑚

• In a vector-matrix form,

 x1 (t )   0 1   x (t )   0 
 x (t )   k b   1    1 u (t )
   x2 (t )  
 2   m m m

 x1 (t ) 
y (t )  1 0 
 2
x (t ) 
 Example-1
• State diagram of the system is

𝑥ሶ 1 𝑡 = 𝑥2 (𝑡)

𝑏 𝑘 1
𝑥ሶ 2 𝑡 = − 𝑥2 𝑡 − 𝑥1 𝑡 + 𝑢 (𝑡)
𝑚 𝑚 𝑚

𝑦 𝑡 = 𝑥1 𝑡

-k/m

-b/m
𝑥ሶ 2
𝑢(𝑡) 1/m 1/s 1/s
𝑥1
𝑦(𝑡)
𝑥2 = 𝑥ሶ 1
 Example-1
• State diagram in signal flow and block diagram format

-k/m

-b/m
1/m 𝑥ሶ 2 𝑥1
𝑢(𝑡) 1/s 1/s 𝑦(𝑡)
𝑥2 = 𝑥ሶ 1
 Example-2
• State space representation of armature Controlled D.C Motor.
Ra La
B 
ia
ea eb T J


• ea is armature voltage (i.e. input) and  is output.

dia
ea  Ra ia  La  eb
dt
T  J  B
 Example-2
T  K t ia eb  K b

J  B-K t ia  0
dia
La  Ra ia  K b  ea
dt
• Choosing 𝜃, 𝜃ሶ 𝑎𝑛𝑑 𝑖𝑎 as state variables
10 0
𝐵 𝐾𝑡 0
𝑑 𝜃 0 − 𝜃
ሶ 0
𝜃 = 𝐽 𝐽 𝜃ሶ + 1 𝑒𝑎
𝑑𝑡 𝑖 𝐾𝑏 𝑅𝑎 𝑖𝑎
𝑎
0 − − 𝐿𝑎
𝐿𝑎 𝐿𝑎
• Since 𝜃 is output of the system therefore output equation is given as

𝜃
𝑦 𝑡 = 1 0 0 𝜃ሶ
𝑖𝑎
 State Controllability
• A system is completely controllable if there exists an
unconstrained control u(t) that can transfer any initial
state x(to) to any other desired location x(t) in a finite
time, to ≤ t ≤ T.

uncontrollable

controllable
 State Controllability
• Controllability Matrix CM

CM  B AB A2 B  An1B 

• System is said to be state controllable if

rank (CM )  n
 State Controllability (Example)
• Consider the system given below

 1 0  1
x    x   u
 0  3 0
y  1 2x

• State diagram of the system is

U (s ) 1 s -1 x1
1
Y (s)
1
2
 3 x2
s -1
 State Controllability (Example)
• Controllability matrix CM is obtained as
CM  B AB
1  1
B  AB   
0  0

• Thus
1  1
CM   
0 0 
• Since 𝑟𝑎𝑛𝑘(𝐶𝑀) ≠ 𝑛 therefore system is not completely
state controllable.
 State Observability
• A system is completely observable if and only if there exists a finite
time T such that the initial state x(0) can be determined from the
observation history y(t) given the control u(t), 0≤ t ≤ T.

observable
unobservable
 State Observability
• Observable Matrix (OM)
 C 
 CA 
 
Observabil ity Matrix OM   CA 
2

 
  
CAn 1 

• The system is said to be completely state observable if

rank (OM )  n
 State Observability (Example)
• Consider the system given below
0 1   0 
x    x   u
0  2 1
y  0 4x

• OM is obtained as
C 
OM   
CA

• Where C  0 4

0 1 
CA  0 4   0  12
0  2 
 State Observability (Example)
• Therefore OM is given as
0 4 
OM   
 0  12 
• Since 𝑟𝑎𝑛𝑘(𝑂𝑀) ≠ 𝑛 therefore system is not completely state
observable.

U (s ) 1 s -1 x2 s -1 x1 Y (s)

2
 Output Controllability
• Output controllability describes the ability of an external
input to move the output from any initial condition to any
final condition in a finite time interval.

• Output controllability matrix (OCM) is given as


OCM  CB CAB CA2 B  CAn 1 B 
 Home Work
• Check the state controllability, state observability
and output controllability of the following system

0 1 0
A  , B   , C  0 1
1 0 1
To download this lecture visit
http://imtiazhussainkalwar.weebly.com/

END OF LECTURES-13