Module 3

MODULE - 3
Traffic Engineering
Definition:
• Institute of Traffic Engineers, USA defines ‘Traffic Engineering is that phase
of engineering which deals with planning and geometric design of streets,
highways, abutting lands and with traffic operation there on, as their use is
related to the safe, convenient and economic transportation of persons and
goods’.
Scope of Traffic Engineering:
Study may be divided into six major sections.
1. Traffic characteristics
2. Traffic studies and analysis
3. Traffic operation – control & regulation
4. Planning and analysis
5. Geometric design
6. Administration and management
 Traffic Characteristics
Traffic Characteristics

Road users characteristics Vehicular characteristics Physical

characteristics Static characteristics

Mental characteristicsDynamic characteristics Psychological

factors

Environmental factors
Road user characteristics
• Human beings are the road users as pedestrians, cyclists or motorists.
The mental, physical and psychological characteristics of road users
affect their ability to be a safe pedestrian or motorists.

Physical characteristics

1. Temporary characteristics: Fatigue, consumption of alcohol or drugs

and illness which reduce alertness and increase the reaction time and
also affects the ability to judge.
2. Permanent characteristics: Vision, hearing, strength and general
reaction to traffic situations.
Visio
nost important factor that affects highway design and safety.
M
1. Acute or clear vision cone: Field of clearest and acute vision is within the cone whose
angle is 3° about the centre line of retina.
• Helps for distant vision.
2. Fairly clear vision cone: Vision is satisfactory when angle of cone is 10° to 12° around
the line of sight.
• Colour and shape can be identified in this field.
• Important for locating traffic signs and signals.
3. Peripheral vision: Total visual field for two eyes.
• Vision is possible but without clear details and colour.
• Angle of peripheral vision.
 160° in horizontal direction
 115° in vertical direction
• Hearing helps drivers in a way, though it is more important for
pedestrians and cyclists.
• Though strength is not an important factor in general, lack of strength
may make parking difficult, particularly for heavy vehicles.

Mental characteristics

•Knowledge, skill, intelligence, experience and literacy can affect the road user
characteristics
•knowledge of vehicle characteristics, traffic behaviour, driving practice, rules
of roads and psychology of road users will be useful for safe traffic
operations.
•Experience helps in reacting to certain situations.
•Understanding traffic regulation, timely action for special instructions
depends on intelligence and literacy.
Road user characteristics
Psychological factors
• These factors affect the reaction time to traffic situation of road users.
Emotional factors such as attentiveness, fear, anger, superstition,
impatience, general attitude towards traffic and regulation also comes
under this.
Environmental Factors
• Various environmental factors include traffic stream characteristics,
facilities to traffic, atmospheric conditions and locality. The purpose of
trip such as educational, shopping, official or recreational purpose will
also affect the behaviour of the user.
Vehicular characteristics
• Vehicular characteristics are important for the design of road. The basic
criteria for design is that it should cater for needs of existing and
anticipated traffic. Geometric standards and thickness of pavement
cannot be increased from time to time to meet the needs of emerging
vehicles.
• Various vehicular characteristics may be divided into two:

1. Static characteristics
2. Dynamic characteristics
Vehicular characteristics
1. Static characteristics: Static characteristics affecting road design
are dimensions, weight and maximum turning angle. Height of vehicle
affects the clearance of overhead structure. Width of vehicles affects
width of lanes. Height of driver seats affects the visibility distance and
height of head light affects the headlight sight distance. The visibility
of driver is also affected by the design of wind shield, front body of
the vehicle etc.
2. Dynamic characteristics: Dynamic characteristics affecting
design are speed, acceleration and braking characteristics. Speed
affects sight distance, superelevation. Length of curve, design gradient
etc. Braking characteristics also affects sight distance and spacing
between vehicles. Stability of vehicle is affected by width of wheel
base and height of centre of gravity. Riding comfort depends on
suspension system of vehicles.
Traffic Capacity
 Traffic volume: It is the number of vehicles moving in a direction in a given lane during
unit time.
 Traffic density: It is the number of vehicles occupying unit length of roadway.
Traffic capacity: It is the ability to accommodate traffic volume. It is the maximum
number of vehicle in a lane or road that can pass a given point in unit time.
Basic capacity: It is the maximum number of passenger cars that can pass a point on a
lane or roadway during one hour under most ideal conditions of roadway and traffic.
 Possible capacity: It is the maximum number of vehicles that can pass a given point on a
lane or roadway during one hour under prevailing roadway and traffic conditions.
Practical capacity: It is the maximum number of vehicles that can pass a given point on
a lane or roadway during one hour, without traffic density being so great as to cause
unreasonable delay, hazard or restriction to driver. This is also called design capacity.
Level of Service LOS
LOS is defined as a qualitative measure describing operational condition
within a traffic stream and their perception by drivers/passengers.
Factors for determining LOS are speed, travel time, freedom to maneuver,
traffic interruptions, comfort, convenience and safety.
 6 LOS are commonly recognized:
 Factors affecting capacity and level of service

•Roadway Factors
• Lane width: According to Highway Capacity Manual lane width of 3.6m is
considered as ideal. As lane width decreases capacity also decreases
• Lateral Clearance: Such as retaining walls, abutments, signposts, light posts,
parked cars etc. located closer than 1.8m from the edge of traffic lane reduce
the capacity
• Width of shoulder: Narrow shoulders reduces the effective width of traffic lanes
as the vehicle travel towards the center of the pavement
 Factors affecting capacity and level of service

•Roadway Factors
• Grades: Grade adversely affect the speed of the vehicles, especially trucks and
thus influence the capacity
• Presence of intersection: Intersections restrict free flow of traffic and thus
adversely affect the capacity
• Alignment: if alignment and geometric (particularly sight distance) are not of
desired standards, the capacity will decrease
• Surface condition: A deteriorated and poorly maintained pavement adversely
affects the capacity
 Factors affecting capacity and level of service

•Traffic Factors
• Percentage of commercial vehicles
• Directional distribution of traffic
 Passenger Car Units
•Passenger Car Unit (PCU) is a metric used in Transportation Engineering, to assess
traffic-flow rate on a highway.
•Different types of vehicles offer different degrees of interference to other traffic and it
is necessary to bring all types to a common unit
Types of Road Intersections
• Intersections may be broadly classified as
1. Intersection at grade
2. Grade separated intersection
• Intersection at grade, all roads meet at the
same level. All traffic maneuvers – merging,
diverging and crossing involved.
• In grade separated intersection, roads are
separated by difference in level.
Types of Road Intersections
Intersection at grade
All roads meeting at the same level with all traffic maneuvers
including merging, diverging and crossing is called at grade intersection.
 Basic requirements are:
i. Area of conflict should be small.
ii. Relative speed and angle of approach of vehicle should be small.
iii. Adequate visibility should be available.
iv. Sudden change of path should be avoided.
v. Features like turning radius and width of pavement should be
adequately provided.
vi. Proper signs should be provided to warn the drivers.
vii. Good lighting at night is desirable.
viii. Separate facility for pedestrian and cyclists should be provided if their volume
is high.
Various forms of intersections at grade

Te Cross Staggered Skewed

e

Skewed Staggered Wy Multiple

Skewed Cross e
Intersection at grade may be
further classified as:
i. Unchannelized intersection
ii. Channelized intersection
iii. Rotary intersection

Unchannelized intersection
In this type there is no restriction to vehicle to use any
part of intersection area. They are the lowest class of
intersection with maximum conflict. When no additional
width is provided for turning movement, it is called
plain intersection. When pavement is widened at
intersection area, it is called flared intersection.
Channelized intersection
In channelized intersection, islands are introduced at intersectional area, thus
reducing the conflicts. Islands help to channelize turning traffic, to control their
speed and angle of approach and to decrease the conflict area. Channelization
may be either partial or complete with divisional and directional islands and
medians.
Advantages:
• Vehicles can be confined to definite paths.
• Angle of merging can be made flat.
• Major and minor conflicts can be reduced.
• Speed control can be established.
• Refuge islands can be provided for pedestrians.
• Channelizing island provide space for installation of
traffic signals.
Rotary intersection
• A rotary intersection or traffic rotary is an enlarged road
intersection where all converging vehicles are forced to move
around large control island in one direction before they weave
out of flow into their respective direction.
• These islands eliminate conflicts.
• Design factors to be considered are design speed, shape of
central island, radius of rotary, weaving angle, width of
rotary, radius of entrance and exit curves, channelizing
islands, camber and super elevation, grade, lighting and
signs.
Advantages of Rotary Intersection Limitations of Rotary Intersection

•Severe crossing conflicts are •All the vehicles are forced to slow down
eliminated and negotiate the intersection. Hence there
•Vehicles entering the rotary are gently will be more delay.
forced to reduce the speed and continue •Even when the traffic is relatively low,
at a lower speed. vehicles are forced to slow down.
•Because of lower speed and •Rotaries require large land area making
elimination of severe conflicts, them unviable in urban areas.
accidents and their severity are less •Vehicles accelerate and leave the rotary at
•Rotaries are self governing and do not high speeds. Hence not suitable when there
need any control by police or traffic is high pedestrian movement.
signals
•Ideally suited for moderate traffic and
intersections with four or more
approaches
Grade separated intersections
Grade separation is generally achieved by means
of a vertical level.
For example, if two roads are intersecting at one
point on a ground level, then grade separation is
achieved by raising or lowering the profile of one
of the roads with respect to ground level. So, the
traffic from both roads will never meet and safety
aspect stays intact.
 The grade separated intersections as:
1. Over pass
2. Under pass
When major highway is taken above the general
ground level, it is an over pass.
Ifhighway is taken below the ground level
by means of under bridge, it is an under pass.
 Over pass
Advantages Disadvantages

• Drainage problems may be • In rolling terrain, if major road is

reduced. taken above, the vertical profile
• When wider road is taken above will also have rolling grade line.
the bridge of smaller span, • If highway is taken over high
construction cost is less. embankment by providing steep
• Aesthetic preference to main gradients, grader existence will
through traffic. cause reduction in speeds.
• No feeling of confinement as in
the case of under pass.
• Future expansion possible.
 Under pass
Advantages Disadvantages

• Warning is given to traffic in • Drainage problem may occur.

advance due to presence of under • Water may have to be
pass. pumped out.
• Vehicles can accelerate while • Overhead structure may
descending the ramp. restrict vertical SD.
• Feeling of restriction occur.
• No possibility of
stage construction.
 Grade separated intersections
Grade separation eliminates intersection of traffic flow at junctions but it is
incomplete without provision for interchanges.
 Interchanges facilitates the change of direction of traffic from one highway to
another
highway at intersections.
 Interchange ramps at grade separations can be provided in three different types and they are :
1. Direct interchange ramp involves diverging to right side and merging from right.
2. Semi-direct interchange ramp allows diverging to left but merging is from right side.
3. Indirect interchange ramp, a simple diverging to left and merging from left side
are involved.
 Grade separated intersections
 Different types of interchanges at grade separated intersections are as follows :
1. Diamond Interchange
2. Trumpet Interchange
3. Rotary Interchange
4. Partial Cloverleaf Interchange
5. Cloverleaf Interchange
 Grade separated intersections
Diamond Interchange
Diamond interchanges are used where two highways cross each other. It contains 4 legs
of direct interchange ramps in 4 quadrants of the junctions as shown in the image.
Grade separated intersections
Trumpet Interchange

Trumpet interchanges are constructed where one highway terminates at another

highway as shown in the figure. It contains three legs at the end, two of them are
direct interchange ramps and another one is loop ramp which is a combination of
semi-direct and indirect interchange ramps. This is also called as a three-leg
interchange.
 Grade separated intersections
Cloverleaf Interchange

Cloverleaf interchanges contain 4–legs and eight ramps. In each quadrant, one
direct interchange ramp and one indirect interchange ramp is provided as shown in
the figure. This type of interchange fulfills all the requirements for
complete separation of traffic. Cloverleaf interchanges are used at intersections
where two major highways cross each other.
Kathipara Flyover, Chennai- India’s first cloverleaf interchange designed by IITM
 Grade separated intersections
Partial Cloverleaf Interchange

Partial cloverleaf interchange is the modification of cloverleaf interchange. It also

contains 4 legs but with fewer loop ramps than cloverleaf interchange as shown
below.
Grade separated intersections
Rotary Interchange

Rotary interchange is provided at circular junctions where traffic is permitted to

flow in one direction around Central Island and one road axis is raised above the
rotary intersection to allow grade separation.
 Grade Separated Intersection
Advantages Disadvantages
• Since roads are separate, no need for • Very costly
stopping and accidents are avoided • Not possible when right of way is
• Increased safety for turning traffic- limited like in urban areas or built up
Right turn movement is converted to areas
diverging from left and merging
from left - hence more safe.
• Savings in travel time
• Stage construction of ramps possible
after the structure is constructed