Martti Varmola 
Männyn istutustaimikoiden lustonleveysmalli.
Varmola M. (1989). Männyn istutustaimikoiden lustonleveysmalli. Silva Fennica vol. 23 no. 4 article id 5388. https://doi.org/10.14214/sf.a15546
English title: A model for ring width of planted Scots pineAbstract
Ring width at breast height is presented as a function of stem radius at breast height, the ratio between the diameter of a tree and the basal area median diameter, site index, and density of stand. By means of a conversion model ring width at stump height can be estimated as a function of ring width at breast height.
According to previous studies substantially better wood quality can be expected if mean width near the pith at stump height decreases from 3 to 2 mm. According to the present study only on the poorest sites suitable for Scots pine (Pinus sylvestris L.) planting (poor Vaccinium type) the ring width is less than 3 mm at stump height even in the thickest trees. On more fertile sites a substantial increase in the recommended planting density is required, if the mean ring width is aimed to be less than 3 mm. On the best sites it is impossible to reach mean ring width of less than 2 mm, when the density is less than 4,000 stems/ha. Only the thinnest trees on the poorest sites can have a mean ring width less than 2mm.
The PDF includes an abstract in English.
Original keywords
mänty;
taimikot;
lustonleveys;
kasvumallit;
puuaineen laatu
English keywords
Pinus sylvestris;
wood quality;
spacing;
ring width;
growth models
Published in 1989
Views 2309
Available at https://doi.org/10.14214/sf.a15546 | Download PDF
