Jori Uusitalo 
Pre-harvest measurement of pine stands for sawing production planning
Uusitalo J. (1997). Pre-harvest measurement of pine stands for sawing production planning. Acta Forestalia Fennica no. 259 article id 7519. https://doi.org/10.14214/aff.7519
Abstract
To enhance the utilization of the wood, the sawmills are forced to place more emphasis on planning to master the whole production chain from the forest to the end product. One significant obstacle to integrating the forest-sawmill-market production chain is the lack of appropriate information about forest stands. Since the wood procurement point of view in forest planning systems has been almost totally disregarded there has been a great need to develop an easy and efficient pre-harvest measurement method, allowing separate measurement of stands prior to harvesting. The main purpose of this study was to develop a measurement method for Scots pine (Pinus sylvestris L.) stands which forest managers could use in describing the properties of the standing trees for sawing production planning.
Study materials were collected from ten Scots pine stands located in North Häme and South Pohjanmaa, in Southern Finland. The data comprise test sawing data on 314 pine stems, diameter at breast height (dbh) and height measures of all trees and measures of the quality parameters of pine sawlog stems in all ten study stands as well as the locations of all trees in six stands. The study was divided into four sub-studies which deal with pine quality prediction, construction of diameter and dead branch height distributions, sampling designs and applying height and crown height models. The final proposal for the pre-harvest measurement method is a synthesis of the individual sub-studies.
Quality analysis resulted in choosing dbh, distance from stump height to the first dead branch, crown height and tree height as the most appropriate quality characteristics of Scots pine. Dbh and dead branch height are measured from each pine sample tree while height and crown height are derived from dbh measures by aid of mixed height and crown height models. Pine and spruce diameter distribution as well as dead branch height distribution are most effectively predicted by the kernel function. Roughly 25 sample trees seem to be appropriate in pure pine stands. In mixed stands the number of sample trees needs to be increased in proportion to the intensity of pines in order to attain the same level of accuracy.
Keywords
Pinus sylvestris;
diameter distribution;
height models;
crown height estimation;
forest sampling;
lumber quality prediction
Published in 1997
Views 2115
Available at https://doi.org/10.14214/aff.7519 | Download PDF
