The document discusses sedimentary facies analysis and the concepts of facies, facies associations, and sedimentary processes. It defines a facies as the physical features of a sedimentary deposit that can be used to distinguish it from adjacent deposits. Facies associations are genetically related groups of facies that record particular depositional environments. Sedimentary processes include selective processes that transport and structure sediments, as well as mass processes involving large sediment movements like debris flows, grain flows, mud flows, and turbidity flows.
1 of 20
More Related Content
Sedimentology Lecture 4. concept of sedimentary facies, association and processes
1. Some basic remarks on the Concept
of Facies, Facies association and
sedimentary processes
2. An useful method to analyse sedimentary bodies is the FACIES ANALYSIS.
This approach allows us to describe and interpret sedimentary bodies occurring in outcrop or in the Earth subsurface.
A SEDIMENTARY FACIES is the ensemble of physical features of a sedimentary accumulation, including lithology, grain size,
structures, fossil content etc. and that can be used in order to distinguish it from adjacent different deposits.
A SEDIMENTARY FACIES can be recognise through three main phases of investigation:
1) Observation of the physical features;
2) Documentation by using standards;
3) Interpretation as processes.
F A C I E S A N A L Y S I S
2
observation description interpretation
3. A SEDIMENTARY FACIES is the ensemble of physical features of a sedimentary accumulation, including lithology, grain size, structures, fossil
content etc. and that can be used in order to distinguish it from adjacent different deposits. Each SEDIMENTARY FACIES can be subdivided into
minor components (sub-facies) or adjacent facies can be grouped into a FACIES ASSOCIATION.
3
R2
R1
R3
FACIES ASSOCIATION
Association 1
Association 2
Association 3
FACIES
Facies A
Facies B
Facies C
sub-FACIES
Sub-Facies
A1
Sub-Facies
A2
Sub-Facies
A3
4. • Nonstratified (massive), planar parallel-stratified, trough
cross-stratified, planar cross-stratified and ripple cross-lamin.
sandstone facies
• Massive, cross-stratified and planar parallel-stratified gravel
facies
• Turbidite bed classes based on Bouma divisions, such as
Tabcde, Tacde, Tbcde, Tbde, Tcde, Tde, etc.
HIGH (with facies as the
record of depositional
processes)
Sedimentological study of
a basin-fill succession or
its selected part
• Braided vs. meandering river facies
• Channel-fill vs. overbank alluvial facies
• Prodelta, delta toe, delta slope, delta front and delta top facies
• Foreshore, upper shoreface, lower shoreface, offshore
tranistion and offshore facies
• Tidal sandflat, mixed flat, mudflat and channel/creek facies
• Subtidal, intertidal and supratidal facies
• Upper, middle and lower submarine fan facies; or channel-fill
vs. overbank turbidites
MODERATE (with facies as
the record of depositional
subenvironments or narrowly-
defined specific
environments)
Basin-scale
palaeogeographic study
and sequence stratigraphy
• Alluvial, aeolian, shoreline/deltaic, nearshore, offshore facies
• Barrier/lagoon and estuarine facies
• Patch reef and carbonate platform facies
• Submarine fan/apron and abyssal plain facies
LOW (with facies as the
record of broadly-defined
depositional environments)
Broad, regional-scale
palaeogeographic study
• Terrestrial vs. marine facies
• Shallow-marine vs. deep-marine facies
• Carbonate vs. siliciclastic facies
• Evaporitic vs. carbonate facies
VERY LOW (with facies as
the record of whole classes of
depositional environmets)
Very broad, inter-regional
or ’global-scale’
palaeogeographic study
EXAMPLE DEPOSIT TYPESRESOLUTION LEVELSCOPE OF STUDY
The concept of sedimentary facies
The notion of facies used by researcher depends on the scope of a particular study.
5. The Walther Law
The palaeoenvironments (facies assemblages) that we find stacked vertically upon one another in a stratigraphic succession ...
… did originally occur laterally to one another and were superimposed by the lateral shifting of environment zones.
The concept of lithostratigraphic logging
and the interest in vertical facies organization stem
from the Walther Law.
Systems tract in sequence-stratigraphic sense
Systems tract in palaeogeographical sense
6. STRATIGRAPHIC ELEMENTS SEDIMENTOLOGICAL ANALYSIS INFORMATION DERIVED
SEDIMENTARY FACIES are the basic types of
sedimentary deposits, distinguished macroscopically on
a descriptive basis as the elementary “building blocks”
of a sedimentary succession.
The sedimentary succession is logged by being divided into more-
or-less uniform “units”, or beds, on the basis of:
sediment texture (grain characteristics)
sediment structures (grain organization characteristics)
colour and biogenic features (if present)
geometry (thickness, lateral extent, shape, boundary types).
Units with similar characteristics are classified as one facies. Each
facies is separately described and interpreted.
The principal processes of sediment transport
and deposition are recognized.
Some processes may be directly diagnostic of a
particular sedimentary environment and others
may not, but as a group – or association – they
invariably are (see the next step of analysis).
FACIES ASSOCIATIONS are assemblages of spatially
and genetically related facies, distinguished as the
basic “building megablocks” of the sedimentary
succession.
The succession of facies is reviewed to recognize their natural
stratigraphic grouping into genetically coherent assemblages:
facies associations. These are interpreted, on the basis of their
depositional processes, as the record of particular sedimentary
environments. The environments are then arranged into a spectrum
from “proximal” to “distal”, or from shallower to deeper water. On
this basis, a conceptual model of the environments as a “systems
tract” is developed. A geographical systems tract is a spatial array
of coeval sedimentary environments through which the net transfer
of sediment occurs from land to the sea. The term is used also for
the sedimentary record of such an array of environments and their
behaviour (see below). A systems tract can be “short” or “long”,
depending on the number and range of systems (environments)
involved.
The sedimentary environments, or depositional
“systems”, are identified and their spatial
organization as a geographical “systems tract” is
recognized.
sea level
geographical systems tract (ST)
This part of facies analysis requires that the
researcher has a good “facies atlas” of natural
environments in mind and understands well their
possible variation and spatial relationships.
SYSTEMS TRACT = a succession of facies
associations recording particular types of shoreline
behaviour in a geographical systems tract. The basic
types are lowstand and highstand normal-regressive
STs and forced-regressive and transgressive STs.
SEQUENCE = a succession of systems tracts recording
one complete R-T cycle of relative sea-level change,
from one maximum regression phase to the maximum
flooding phase and to another maximum regression
phase; alternatively, sequences can be distinguished
as T-R cycles, with the maximum flooding phases
(surfaces) as boundaries.
Based on the identified spectrum and stratigraphic order of facies
associations (palaeoenvironments), the principal types of systems
tracts are recognized within the sedimentary succession. The
stratigraphic organization of these tracts is then used to distinguish
“sequences”, or transgressive-regressive cycles of relative sea-level
change (combined with possible changes in sediment supply).
The term parasequence denotes the record of a relative sea-level rise
followed by a “normal” (progradational) regression and another sea-level
rise, without an intervening relative fall, in which case a transgressive
systems tract (TST), possibly negligibly thin, culminates in the maximum
flooding phase (surface) and is followed by a regressive systems tract
(RST), which in turn is terminated by a new marine transgression.
The term sequence denotes the record of a cycle of relative sea-level fall
and rise, in which case the relative fall (“forced” regression) is represented
by an erosional unconformity surface with coeval distal deposits (FRST) and
a subsequent aggradational/progradationl lowstand systems tract (LST),
jointly a form of RST, overlain by a transgressive systems tract (TST) that
culminates in the maximum flooding phase and is followed by a
progradational (normal-regressive) highstand systems tract (HST).
The stratigraphic pattern of relative sea-level
changes (combined with changes in sediment
supply) is recognized. A hierarchy of lower-order
(longer-term) and higher-order (shorter-term)
cycles of such changes can be distinguished.
parasequence
sequence
Proximal Medial Distal
T
Distal
Medial
Proxim.
R
Facies analysis scheme
SFR
FS
MFS
MFS
FS
8. 1) SELECTIVE PROCESSES (Tractive)
Selective processes generate both a transport (TRACTIONAL TRANSPORT) but also a modelling of the
sediment, producing structures (TRACTIONAL STRUCTURES).
(Ex.: marine currents; waves; river floods).
2) MASS PROCESSES
Mass processes produce a ‘mass transport’ of large amount (masses) of sediment, both in subaerial and
subaqueous settings.
(Ex.: landslides; mudflows, etc.).
2.1) Gravitative Processes
The gravitative processes represent a type of mass process, which occur mostly under the effect of the gravity force.
(Ex.: debris flow, grain flow, mud flow; turbidity flow).
2.2) NON Gravitative Processes
The gravitative processes represent a type of mass process, whose energy exceeds that of the gravity force, in case of
excpetional events.
(Ex.: river catastrophic floods; cyclones, hurricanes, typhoons; volcanic surges).