This document provides an overview of the key elements needed to establish a strong safety program for a workplace. It outlines seven foundational activities for an effective safety program: 1) management leadership, 2) hazard anticipation and detection, 3) hazard prevention and control, 4) planning and evaluation, 5) administration and supervision, 6) safety and health training, and 7) employee participation. Specific actions are described for each foundational activity to integrate safety practices into daily business operations. Templates and forms are also included in the document to help implement aspects of the safety program such as investigating accidents and reporting hazards.
2. 2
About this guide
“The foundation of a safe workplace” is an Oregon OSHA
Standards and Technical Resources publication.
Layout, design, and editing:
Layout and design: Patricia Young
Editing and proofing: Mark Peterson
Questions or comments? We’d like to hear from you.
Contact: Ellis Brasch, Oregon OSHA, 503-947-7399, ellis.k.brasch@state.or.us
Privacy notice: Reprinting, excerpting, or plagiarizing this publication is fine with us!
Please inform Oregon OSHA of your intention as a courtesy.
3. 3
Laying the foundation for a safe workplace
Workplace safety doesn’t have to be complicated. It doesn’t have to be expensive. And it doesn’t
have to be government mandated. We’ve never met a small business owner who is “against”
workplace safety or one who says “I don’t care about my employees.” That’s not how
businesses succeed.
This guide is about what it takes to make a workplace safe. It describes the fundamentals of a
sound safety and health program, which are based on just seven key management activities:
1. Management leadership
2. Hazard anticipation and detection
3. Hazard prevention and control
4. Planning and evaluation
5. Administration and supervision
6. Safety and health training
7. Employee participation
Just as you lay the foundation for a building by placing the forms, pouring the footings, and
placing rebar, you lay the foundation for a safe workplace with these seven activities. But they
won’t happen unless you make them happen. You can manage workplace safety just as you
manage any other part of your business with commitment, perseverance, and the support of
your most valuable asset: your employees.
Tools for maintaining the foundation
At the back of the guide, you will find the following tear-out materials, which will help you prepare
a written safety policy, investigate accidents, and report workplace hazards:
99 Sample safety and health policy statement
99 How to conduct an accident investigation
99 Form for reporting a hazard or other safety concern
99 Form for describing an accident or incident
99 Form for investigating an accident
99 Form for investigating an accident (or incident)
99 Form for reporting an overexertion injury
4. 4
Management leadership
Workplace safety is a right and responsibility. Your employees have a right to a safe workplace
and must be involved in keeping it that way. The most important thing you can do for your safety
program is to believe that safe production is the only way to do business.
Show your commitment by:
• Writing a company safety policy that emphasizes what safety means to your business
and states your expectations for all employees. Include your program’s safety and health
goals and reinforce your belief that workplace safety is a responsibility that all your
employees share.
• Making sure your employees follow safe work practices — and you follow them, too.
• Giving your employees the authority they need to carry out their safety responsibilities.
• Budgeting the time and resources to achieve your workplace safety goals.
• Acting on the recommendations from your safety committee or safety meeting group.
• Making sure your employees have the safety and health training they need to do
their jobs.
Hazard anticipation and detection
How do you anticipate hazards? That’s easy. You think about them. And then you find them before
they cause an accident. Here are seven things you can do to anticipate and detect hazards:
• Conduct a baseline hazard survey. A baseline survey is a thorough evaluation of your
entire workplace — including work processes, equipment, and facilities — that identifies
safety or health hazards. A complete survey will tell you what the hazards are, where they
are, and how severe they could be. Have an experienced safety professional survey your
workplace with you.
• Perform regular workplace inspections. Regular workplace inspections tell you
whether you’ve eliminated or controlled existing hazards and help you identify new
hazards. Quarterly inspections by employees trained in hazard recognition are a good
way to get the job done.
• Do a job-hazard analysis. A job-hazard analysis (JHA) is a method of identifying,
assessing, and controlling hazards associated with specific jobs. A JHA breaks a job down
into tasks. You evaluate each task to determine if there is a better, safer way to do it. A
job-hazard analysis works well for jobs with difficult-to-control hazards and jobs with
histories of accidents or near misses. JHAs for complex jobs can take a considerable
amount of time and expertise to develop. You may want to have a safety professional
help you.
• Use material safety data sheets to identify chemical hazards. Your employees
must be able to understand and use material safety data sheets (MSDS). An MSDS
has detailed information about a hazardous chemical’s health effects, its physical and
chemical characteristics, and safe practices for handling. You must prepare an inventory
list of your hazardous chemicals and have a current MSDS for each hazardous chemical
used at your workplace. If your employees handle hazardous chemicals or chemical
products, you’ll also need to develop a written hazard-communication plan that identifies
the chemicals and describes how your employees are informed about chemical hazards.
5. 5
• Look for new hazards whenever you change equipment, materials, or work
processes. Determine what hazards could result from the changes and how to control
them. If your business works at multiple sites — construction contracting, for example —
you may need to do a hazard assessment at each site.
• Investigate accidents to determine root causes. Most accidents are preventable.
Each one has a cause — poor supervision, inadequate training, and lax safety policies are
examples. When you eliminate the cause, you can prevent another accident. Develop a
procedure that determines who will do the investigation and ensures the investigation
will be thorough and accurate.
• Investigate incidents to determine root causes. An incident is a miss or a “close
call.” One way to investigate near misses is to have a “no-fault” incident reporting
system: Employees just fill out a simple incident-report form that describes the incident
and how it happened. Investigate the incident as if it were an accident and tell your
employees what you will do to prevent it from happening again.
Hazard prevention and control
The best way to control a hazard is to eliminate it. If you can’t eliminate it, control it so that
it won’t do any harm. The best controls also protect the worker by reducing the risk of human
error, such as interlocks on guards and other “fail-safe” mechanisms.
Other ways to prevent and control hazards:
• Ensure that your employees know when and how to use personal protective
equipment (PPE). Personal protective equipment is another way to minimize exposure
to a hazard, but it’s only a barrier between the hazard and the user. If PPE fails, your
employee risks exposure. Before you purchase PPE, know the specific hazards it protects
against and be sure that it fits the user. When you’re unsure, ask someone who’s familiar
with the type of equipment you need — especially when you’re selecting chemical-
protective clothing or respirators. Always train employees how to wear, use, and maintain
their equipment before they use it for the first time.
• Maintain equipment on schedule. Preventive maintenance keeps equipment
running properly, reduces downtime, and prevents accidents. Maintenance logs that
show when the work was done, what was done, and the next scheduled maintenance
date are a good idea. And always follow the equipment manufacturers’ maintenance
requirements.
• Practice good housekeeping. Keep passageways, storerooms, and work areas clean
and sanitary. Keep electrical cords away from areas where people could trip over them.
Keep floors clean and dry. Use drains, false floors, platforms, or mats in wet areas. Keep
floors and passageways free from protruding nails, electrical cords, splinters, holes, or
loose boards.
• Enforce workplace safety rules. These include any Oregon OSHA rules that apply
to your workplace as well as your own rules. Document them, ensure that employees
understand them, and enforce them.
• Plan for emergencies. A well-rehearsed emergency plan can protect people,
equipment, and property. You should have well-stocked first-aid kits and a procedure for
summoning ambulance or paramedic services.
• Document how you control hazards. Keep records that show what you’ve done to
eliminate or control hazards. Identify the hazard, describe what you did to correct it, and
record the date it was corrected.
6. 6
Planning and evaluation
Planning and evaluation give your safety program a long-term focus. Are you achieving your goals?
If not, what are the reasons? Were your accident investigations effective? Did the reports identify
causes and recommend how to control or eliminate them? At least once each year, evaluate your
safety effort.
Use the results of your evaluation to set new goals. Describe what needs to be done to accomplish
each goal, determine who’s responsible for accomplishing it, and set a date for achieving it.
Other important planning activities include:
• A workplace injury-and-illness analysis.
• A comprehensive review of your written safety procedures for equipment.
• A comprehensive review of your required programs (such as lockout/tagout and hazard
communication).
Administration and supervision
Administration and supervision are fancy terms for accountability. An effective safety program holds
all employees accountable for doing their jobs safely. Ways to strengthen accountability:
• Write a disciplinary policy that expresses clear safety expectations for all employees.
• Make supervisors accountable for enforcing workplace safety rules and safe practices
among those they supervise.
• Include your employees’ workplace safety responsibilities in their job descriptions and
performance evaluations.
• Acknowledge your employees’ contributions to the safety effort.
Safety and health training
Your employees need to know their safety responsibilities, what hazards they could be exposed
to, and how to control their exposures. New-employee orientations, emergency drills, classroom
sessions, and hands-on practice are good ways they can learn. And don’t forget managers and
supervisors.
• All employees must know the Oregon OSHA requirements that apply to their jobs. They must
be trained to do their jobs safely before they begin, retrained whenever there are changes
that create new workplace hazards, and trained periodically to maintain their skills.
• New employees should have orientation training that covers your business’ safety policy,
workplace safety rules, hazards, and procedures for responding to emergencies.
• Supervisors must know the hazards, hazard-control methods, applicable Oregon OSHA rules,
and emergency procedures associated with their jobs.
• Managers must understand the importance of leadership in maintaining a safe workplace,
the applicable Oregon OSHA rules, and how to comply with them.
7. 7
Employee participation
You won’t have a strong safety program without employee participation. Your employees operate
the equipment, use the tools, and do the tasks that expose them to hazards so they need to be
involved in the effort to keep your workplace safe.
Make sure your employees have a way to report hazards and respond promptly to
their concerns. They can also participate by:
• Suggesting safety policies, safety-training topics, and ways to allocate safety resources.
• Suggesting ways to prevent and control hazards.
• Showing coworkers how to work safely.
• Helping to evaluate your safety and health program.
9. 9
Tools for maintaining the foundation
Use the following materials to help you – or inspire you – to prepare a written safety policy, investigate accidents,
and report workplace hazards. They’re just examples, intended for use within your company, and not to be used for
reporting to Oregon OSHA.
• Sample safety and health policy statement
• How to conduct an accident investigation
• Form for reporting a hazard or other safety concern
• Form for describing an accident or incident
• Form for investigating an accident
• Form for investigating an accident (or incident)
• Form for reporting an overexertion injury
10. 10
The safety and health of our employees is this company’s most important business consideration. Employees will
not be required to do a job that they consider unsafe. The company will comply with all applicable Oregon OSHA
workplace safety and health requirements and maintain occupational safety and health standards that equal or
exceed the best practices in the industry.
The company will establish a safety committee, consisting of management and labor representatives, whose
responsibility will be identifying hazards and unsafe work practices, removing obstacles to accident prevention,
and helping evaluate the company’s effort to achieve an accident-and-injury-free workplace.
The company pledges to do the following:
• Strive to achieve the goal of zero accidents and injuries.
• Provide mechanical and physical safeguards wherever they are necessary.
• Conduct routine safety and health inspections to find and eliminate unsafe working conditions,
control health hazards, and comply with all applicable Oregon OSHA safety and health requirements.
• Train all employees in safe work practices and procedures.
• Provide employees with necessary personal protective equipment and train them to use and care
for it properly.
• Enforce company safety and health rules and require employees to follow the rules as a condition
of employment.
• Investigate accidents to determine the cause and prevent similar accidents.
Managers, supervisors, and all other employees share responsibility for a safe and healthful workplace.
• Management is accountable for preventing workplace injuries and illnesses. Management will
consider all employee suggestions for achieving a safer, healthier workplace. Management also
will keep informed about workplace hazards and regularly review the company’s overall safety
and health program.
• Supervisors are responsible for supervising and training workers in safe work practices.
• Supervisors must enforce company rules and ensure that employees follow safe practices during
their work.
• Employees are expected to participate in safety-program activities, including reporting hazards,
unsafe work practices, and accidents to supervisors or a safety committee representative; wearing
required personal protective equipment; and supporting the safety committee.
Business owner’s signature:__________________________________________________ Date:_______________
Sample company safety and health policy statement
11. 11
1. Establish an investigation team: Include employees who have been trained to conduct an effective
investigation. A typical team might include:
• An employee from the work area where the accident occurred
• A supervisor from a work area not involved in the accident
• A maintenance supervisor or an employee who understands equipment or
processes associated with the accident
• The safety supervisor
• A safety committee representative
2. Gather information: Record the facts about the accident. Interview witnesses and others involved.
3. Analyze the facts: Identify the accident’s causes and contributing factors. Determine how the
accident could have been prevented.
4. Report the findings: Prepare a written report that describes who was involved, where the accident
occurred, when it happened, and what caused it. Recommend, specifically, how to prevent the
accident from happening again.
5. Act on the recommendations: Have management review the report and determine what will be
done to prevent similar accidents from occurring in the future.
6. Follow up: Ensure that appropriate corrective action was taken to prevent the accident.
How to conduct an accident investigation
12. 12
To the employee: Complete the section below and return to a safety committee representative.
Employee name (optional): _________________________________________________________ Date:_________________
Work unit:________________________________________________ Work section:__________________________________
Describe the hazard or your concern (Be specific): __________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Safety committee follow-up
Action taken: __________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Follow-up action: ____________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Completion date: ________________________________________
Form for reporting a hazard or other safety concern
13. 13
Use this form to describe an accident or incident then fill out an investigation report as soon as possible.
Employee(s) name(s): ____________________________________________________________________________________
Time and date of accident/incident:________________________________________________________________________
Job title(s) and department(s): ____________________________________________________________________________
Supervisor or lead person: ________________________________________________________________________________
Witnesses: ______________________________________________________________________________________________
Brief description of the accident or incident: ________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Body part affected: ______________________________________________________________________________________
Did the injured employee(s) see a doctor? r Yes r No
Did the injured employee(s) go home during their work shift? r Yes r No
If yes, list the date and time injured employee(s) left job(s): ___________________________________________________
Supervisor’s comments:___________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
What could have been done to prevent this accident/incident?________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Have the unsafe conditions been corrected? ( ) Yes ( ) No
If yes, what has been done? ______________________________________________________________________________
If no, what needs to be done? ____________________________________________________________________________
Employer or supervisor’s signature: __________________________________________________ Date: _________________
Additional comments/notes: _____________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Form for describing an accident or incident
14. 14
Use this form to investigate workplace accidents.
Company:________________________________________________ Report no.:____________________________________
Operation:________________________________________________ Investigator:___________________________________
Name of accident victim:___________________________________ Victim’s job title:_______________________________
How long has victim been with this company?________________ How long on this job?__________________________
(Attach this information for each additional person injured.)
Witnesses:
Name:____________________________________________________ Name:________________________________________
Name:____________________________________________________ Name:________________________________________
Name:____________________________________________________ Name:________________________________________
When did the accident occur? Date:__________________________ Time:___________________ Shift:_________________
Where did the accident occur? Department:___________________ Location:______________________________________
What happened? (Describe sequence of events and extent of injury. Attach separate page if necessary.)
Has a similar accident ever occurred? r Yes r No If yes, when?
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
What caused the accident?
List all causes and contributing factors.
•_____________________________________________________________________________________
•_____________________________________________________________________________________
•_____________________________________________________________________________________
•_____________________________________________________________________________________
•_____________________________________________________________________________________
•_____________________________________________________________________________________
Form for investigating an accident
15. 15
List each corrective action to be taken. Who will do it and when will it be done?
1.______________________________________________________________________________________________________
2.______________________________________________________________________________________________________
3.______________________________________________________________________________________________________
4.______________________________________________________________________________________________________
5.______________________________________________________________________________________________________
6.______________________________________________________________________________________________________
7.______________________________________________________________________________________________________
Attach photographs, sketches of the scene, or other relevant information.
Prepared by:______________________________________________ Title:____________________ Date:_________________
Form for investigating an accident continued
16. 16
Use this form to investigate workplace accidents and incidents.
Employee portion
Employee name:______________________________________ Employee work phone:______________________
Work unit:___________________________________________ Work section:______________________________
Supervisor name:_____________________________________ Supervisor work phone:______________________
Length of service in present position:
r Less than 6 months r 6 months-1 year r 1-2 years r 2-3 years r 3-5 years r More than 5 years
Exact location of accident/incident:___________________________________________________________________
Accident/incident date:_____________________________________ Time:________________________ _r a.m. r p.m.
Witnesses Name:______________________________________________ Phone:_______________
r (check if no witness) Name:______________________________________________ Phone:_______________
Body part affected: (check all that apply)
r Neck r Shoulder(s) r Elbow(s) r Wrist(s)/hand(s) r Thigh(s) r Lower leg(s)
r Ankle(s)/foot(feet) r Knee r Hip r Upper back r Lower back r Chest/abdomen
r Other: ________________________________________________________________________
Task that led to the incident:
r Driving r Lifting r Carrying r Pushing/pulling r Keyboarding
r Climbing r Reaching r Handling r Bending r Twisting
r Other: __________________________________________________________________________________________
Describe accident/incident in detail (use additional sheets if necessary):
_______________________________________________________________________________________________________
Employee signature:___________________________________ Date:____________________________________
Supervisor portion
Reported to:______________________________________________ Time:________________________ _r a.m. r p.m.
Supervisor’s description of incident (what happened and why): ______________________________________________
_______________________________________________________________________________________________________
Corrective action: ______________________________________________________________________________________
_______________________________________________________________________________________________________
Employee signature:_______________________________________________________________ Date:_______________
Form for investigating an accident (or incident)
17. 17
Use this form to record and track symptoms of overexertion injuries.
Employee name:___________________________________________ Date:_________________________________________
Employee job title:_________________________________________ Supervisor:____________________________________
Division:__________________________________________________ Section:_________________ Unit:_________________
Length of service in present position:
r Less than 6 months r 6 months-1 year r 1-2 years r 2-3 years r 3-5 years r More than 5 years
Location of task:
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Check activities that led to symptom:
r Driving r Keyboarding r Lifting r Carrying r Pushing/pulling
r Climbing r Reaching r Handling r Bending r Twisting
r Other:
Task(s) causing symptom:
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Total time spent at task in one work day:
r Less than 2 hours r 2-4 hours r 4-6 hours r 6-8 hours r 8-10 hours
Continuous time spent at task without rest:
r Less than 1 hour r 1-2 hours r 2-3 hours r More than 3 hours
Form for reporting an overexertion injury
19. 19
Oregon OSHA offers a wide variety of safety and health services to employers and employees:
Appeals
503-947-7426; 800-922-2689; admin.web@state.or.us
• Provides the opportunity for employers to hold informal meetings with Oregon OSHA on concerns
about workplace safety and health.
• Discusses Oregon OSHA’s requirements and clarifies workplace safety or health violations.
• Discusses abatement dates and negotiates settlement agreements to resolve disputed citations.
Conferences
503-378-3272; 888-292-5247, Option 1; oregon.conferences@state.or.us
• Co-hosts conferences throughout Oregon that enable employees and employers to learn and share
ideas with local and nationally recognized safety and health professionals.
Consultative Services
503-378-3272; 800-922-2689; consult.web@state.or.us
• Offers no-cost, on-site safety and health assistance to help Oregon employers recognize and
correct workplace safety and health problems.
• Provides consultations in the areas of safety, industrial hygiene, ergonomics, occupational
safety and health programs, assistance to new businesses, the Safety and Health Achievement
Recognition Program (SHARP), and the Voluntary Protection Program (VPP).
Enforcement
503-378-3272; 800-922-2689; enforce.web@state.or.us
• Offers pre-job conferences for mobile employers in industries such as logging and construction.
• Inspects places of employment for occupational safety and health hazards and investigates
workplace complaints and accidents.
• Provides abatement assistance to employers who have received citations and provides compliance
and technical assistance by phone.
Public Education
503-947-7443; 888-292-5247, Option 2; ed.web@state.or.us
• Provides workshops and materials covering management of basic safety and health programs,
safety committees, accident investigation, technical topics, and job safety analysis.
Standards and Technical Resources
503-378-3272; 800-922-2689; tech.web@state.or.us
• Develops, interprets, and gives technical advice on Oregon OSHA’s safety and health rules.
• Publishes safe-practices guides, pamphlets, and other materials for employers and employees
• Manages the Oregon OSHA Resource Center, which offers safety videos, books, periodicals, and
research assistance for employers and employees.
Need more information? Call your nearest Oregon OSHA office.
Salem Central Office
350 Winter St. NE, Rm. 430
Salem, OR 97301-3882
Phone: 503-378-3272
Toll-free: 800-922-2689
Fax: 503-947-7461
en Español: 800-843-8086
Web site: www.orosha.org
Bend
Red Oaks Square
1230 NE Third St., Ste. A-115
Bend, OR 97701-4374
541-388-6066
Consultation: 541-388-6068
Eugene
1140 Willagillespie, Ste. 42
Eugene, OR 97401-2101
541-686-7562
Consultation: 541-686-7913
Medford
1840 Barnett Road, Ste. D
Medford, OR 97504-8250
541-776-6030
Consultation: 541-776-6016
Pendleton
200 SE Hailey Ave.
Pendleton, OR 97801-3056
541-276-9175
Consultation: 541-276-2353
Portland
1750 NW Naito Parkway, Ste. 112
Portland, OR 97209-2533
503-229-5910
Consultation: 503-229-6193
Salem
1340 Tandem Ave. NE, Ste. 160
Salem, OR 97301
503-378-3274
Consultation: 503-373-7819
OregonOSHA Services