Bomba Dosadora Milroyal C
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Report
Share
Report
Share
1 of 12
Download to read offline
1
2
3
4
5
6
7
8
9
10
11
12
More Related Content
Bomba Dosadora Milroyal C
1. MilRoyalC
1
Milroyal C
PD 3661
Effective 6/2009
1
Milroyal C
PD 3661
Effective
Milroyal
C Pumps
GENERAL SPECIFICATIONS
Drive
Polar crank design — all moving parts submerged in oil. Front end scavenging—
The plunger always set to top dead center on each stroke.
Liquid Ends Available
High Performance Diaphragm (HPD); Packed Plunger; Disc Diaphragm
Accuracy
±1.0% over 10:1 turndown ratio
Maximum Performance Ratings (per head)
2080 gph (7873 l/h) @ 50 psig (3 bar) to 4 Gph (15 l/h) @ 10,000 psig (689 bar)
Capacity Control
Manual Micrometer standard; Electronic, pneumatic, or variable speed optional
Multiplexing
Up to 6 pumps driven by one motor. Limited to a maximum of 25 HP. Consult Applications
Engineering concerning capabilities for a specific application.
Approximate Shipping Weight. (Simplex)
850–1400 lbs. (386-635 kg), depending upon liquid end selected
Milroyal C DUPLEX with HPD Liquid End
3. MilRoyalC
3
Milroyal C
PD 3661
Effective 6/2009
MAXIMUM ALLOWABLE SUCTION PRESSURE RANGE — HPD
Plunger Diameter Standard Mid Range High Range Maximum Range
in. mm PSIG Bar PSIG Bar PSIG Bar PSIG Bar
1″ 25 100 7 — — — — — —
1¼″ 32 100 7 — — — — — —
1½″ 38 85 6 100 7 — — — —
2″ 51 70 5 100 7 — — — —
2½″ 64 50 3 70 5 100 7 — —
3½″ 89 30 2 40 3 70 5 100 7
5″ 127 12 1 17 1 28 2 65 4
5¾″ 146 9 1 13 1 21 1 50 3
Material
Plunger
Diameter
A‡ B‡ C* D
in. mm in. mm in. mm in. mm in.
1″ 25 57⁄32″ 133 57⁄32″ 133 73⁄4″ 197 ½″
11⁄4″ 32 71⁄16″ 179 71⁄16″ 179 913⁄16″ 249 1″
11⁄2″ 38 717⁄32″ 191 717⁄32″ 191 913⁄16″ 249 1″
Metal
2″ 51 717⁄32″ 191 717⁄32″ 191 913⁄16″ 249 1″
2½″ 64 101⁄8″ 257 101⁄8″ 257 125⁄16″ 313 1½″
3½″ 89 101⁄8″ 257 101⁄8″ 257 125⁄16″ 313 1½″
5″ 127 123⁄8″ 314 123⁄8″ 314 167⁄8″ 429 –
53⁄4″ 146 123⁄8″ 314 123⁄8″ 314 167⁄8″ 429 –
2½″ 64 13″ 330 13″ 330 12″ 305 1½″
Plastic
3½″ 89 13″ 330 13″ 330 12″ 305 1½″
5″ 127 181⁄2″ 470 14″ 356 137⁄8″ 352 2½″†
53⁄4″ 146 181⁄2″ 470 14″ 356 137⁄8″ 352 2½″†
Notes:
* 3″–150 lb. ANSI raised face flange.
† Suction and discharge connections are horizontal on metal and vertical on plastic,
except on plastic 5″ (127 mm) and 5¾″ (146 mm) plungers, where suction is
horizontal and discharge is vertical.
‡ A B dimensions are based on standard ball check configuration: metallic-single ball
checks (single poppet on 5″ (127 mm) and 5¾″ (146 mm)); plastic-double ball checks
(single on 5″ (127 mm) and 5¾″ (146 mm)).
HPD LIQUID END DIMENSIONS
For exact dimensions, request a certified drawing
4. MilRoyalC
4
Milroyal C
PD 3661
Effective 6/2009
NOTES:
* Plunger codes 16, BG, 20, CA, 24, CE, 32 are not available with plastic liquid ends (liquid end material code 2) since this capacity
range is covered by the Milroyal B Series.
†
Plunger codes 40 56 are only available with double ball checks (ball quantity code 22) when ordered in plastic.
‡
Plunger codes 80 92 are only available with poppet valves on metallic pumps or single ball checks on plastic pumps (ball quantity
code 11), and ANSI 150 lb. socket weld connections (connection code S1). Plunger codes 80 92 are not available in Alloy C22
(liquid end material code 6).
§ Operating pressure is the application system pressure. The internal relief valve is normally set 15% above the operating pressure. If
an internal relief valve setting greater than 15% above the operating pressure range is required, select the operating pressure range
that will accommodate the relief valve setting.
** Refer to the suction pressure table for maximum suction pressure vs. range.
†† Options C5, SN, and SE are only available on metallic liquid ends.
‡‡ Flange sizes equal the NPT connection size as noted on the liquid end drawing.
§§ Explosion proof electronic actuators are certified by Factory Mutual for Class I, Division I, Groups B, C, D; Class II, Division I,
Groups E, F, G.
*** Special ball check and seat materials are available for severe slurry service. Contact factory.
HIGH PERFORMANCE DIAPHRAGM (HPD) LIQUID END MODEL CODE
M HC
End Item Model Code Option Select Number
Plunger Dia.
16 = 1″*
BG = 1″ (1600 psi+)
20 = 11
⁄4″*
CA = 11
⁄4″* (1000 psi+)
24 = 11
⁄2″*
CE = 11
⁄2″ (1000 psi+)
32 = 2″*
40 = 21
⁄2″†
56 = 31
⁄2″†
80 = 5″‡
92 = 53
⁄4″‡
Liquid End Material
1 = 316 SS
2 = Plastic
5 = Alloy 20
6 = Alloy C22
Gear/Shaft
Single Shaft
8F = 12.5:1
8G = 15.5:1
8H = 20.5:1
8J = 24:5:1
8K = 40:1
Double Shaft
8A = 12.5:1
8B = 15.5:1
8C = 20.5:1
8D = 24:5:1
8E = 40:1
Motor Mount
AA = None
Flange Mount
CB = Nema 56C
CC = Nema 143TC, 145TC
CD = Nema 182TC, 184TC
CE = Nema 213TC, 215TC
CF = Nema 254TC, 256TC
Metric Mount, B5 Flange
ME = 1EC 90
MF = 1EC 100
MG = 1EC 132
MH = 1EC 160
Foot Mount
FK = Nema 143T, 145T
FN = Nema 182T, 184T
FP = Nema 213T, 215T
FR = Nema 254T, 256T
Suction
Pressure
Range**
ST = Standard
H2 = Medium
H3 = High
H7 = Maximum
Rupture Detection/Double Dia.
NN = None
C5 = Rupt. Det. w/gauge††
SN = Rupt. Det. w/gauge Nema 4 switch††
SE = Rupt. Det. w/gauge exp. pr. switch††
DD = Double Diaphragm
DP = Double Diaphragm w/Probe
Connections‡‡
SE = NPT
T1 = ANSI 150 lb. threaded
T3 = ANSI 300 lb. threaded
T6 = ANSI 600 lb. threaded
S1 = ANSI 150 lb. socket weld
S3 = ANSI 300 lb. socket weld
S6 = ANSI 600 lb. socket weld
Capacity Adjustment
Manual
M1 = Micrometer (316 SS)
Electronic, 4–20 mA Input
E1 = Nema 4, 115 V
E2 = Nema 4, 230 V, 60 Hz
E3 = Nema 4, 230 V, 50 Hz
EA = Explosion Proof, 115 V§§
EB = Explosion Proof, 230 V, 60 Hz§§
EC = Explosion Proof, 230 v, 50 Hz§§
Pneumatic
PN = 3–15 PSI
Ball
Quantity***
11 = Single
22 = Double
Base
11 = Simplex
22 = Duplex
33 = Simplex
NN = None
Operating Pressure§
1″, 1¼″ Plunger Dia.
PB = 0-400 psi (460 max. RV)
PC = 401-750 psi (860 max. RV)
PD = 751-1550 psi (1780 max. RV)
PE = 1551-3025 psi (3500 max. RV)
1½″, 2″ Plunger Dia.
PB = 0-220 psi (250 max. RV)
PC = 221-450 psi (515 max. RV)
PD = 451-750 psi (860 max. RV)
PE = 751-1000 psi (1150 max. RV)
PF = 1001-2060 psi (2370 max. RV)
2½″, 3½″, 5″, 5¾″ Plunger Dia.
PB = 0-220 psi (250 max. RV)
PC = 221-340 psi (390 max. RV)
PD = 341-500 psi (575 max. RV)
9. MilRoyalC
9
Milroyal C
PD 3661
Effective 6/2009
MAXIMUM ALLOWABLE SUCTION PRESSURE RANGE — Packed Plunger
Plunger Diameter Standard Mid Range High Range Maximum Range
in. mm PSIG Bar PSIG Bar PSIG Bar PSIG Bar
7⁄16″ 11 850 59 1510 104 2950 203 — —
5⁄8″ 16 450 31 780 54 1500 103 3800 262
7⁄8″ 22 250 17 420 29 780 54 2000 138
11⁄8″ 29 170 12 250 17 490 34 1200 83
11⁄2″ 38 110 8 165 11 290 20 690 48
2″ 51 70 5 100 7 170 12 395 27
21⁄2″ 64 50 3 70 5 115 8 260 18
31⁄2″ 89 30 2 40 3 70 5 140 10
47⁄16″ 113 25 2 30 2 40 3 85 6
Material
Plunger
Diameter
E F G H
in. mm in. mm in. mm in. mm in.
7⁄16″ 11
41
⁄2″
114
41
⁄2″
114
45
⁄16″ 110
3
⁄4″
5⁄8″ 16
7⁄8″ 22
59
⁄16″ 141 59
⁄16″ 141 45
⁄16″ 110 11
⁄4″
Metal 11⁄8″ 29
Only 11⁄2″ 38 5″ 127 5″ 127 47⁄16″ 113 11⁄2″
2″ 51 55⁄8″ 143 55⁄8″ 143 51⁄8″ 130 11⁄2″
2½″ 64 73⁄8″ 187 73⁄8″ 187 7″ 178 21⁄2″
31⁄2″ 89 83⁄4″ 222 83⁄4″ 222 43⁄4″ 121 3″
47⁄16″ 113 81⁄8″ 206 81⁄8″ 206 413⁄16″ 122 3″
Packed Plunger LIQUID END DIMENSIONS
Discharge
Connection
“H” NPT
Suction
Connection
“H” NPT
CL
“G”
“F”
“E”
10. MilRoyalC
10
Milroyal C
PD 3661
Effective 6/2009
PACKED PLUNGER LIQUID END MODEL CODE
NOTES:
* Plunger Diameter Codes BA, AH, 24, 32, 40, 56 71 are available in 316 SS only. Other liquid end materials can be quoted by the Milton Roy
Application Engineering Department. High pressure plunger diameter codes are for applications requiring pressures over 5000 psi.
** Packing code NM is a standard option for 316 SS liquid ends with plunger diameters of 11⁄2″ and larger.
*** Select packing lube GF with packing codes TM NM. Contact Applications Engineering for other packing lube selection.
† Refer to suction pressure table for suction pressure verus range.
†† Flange sizes equal the NPT connection size as noted on the liquid end drawing.
‡ Alloy 20 liquid ends are available standard with packing code TM. Contact applications engineering for other packings or plunger materials
with Alloy 20 liquid ends.
‡‡ The plunger material will automatically match the liquid end material when selecting packing/plunger material code TM.
§ Packing/plunger codes AL, TL, VL are offered on 316 SS liquid ends with 7⁄16″ through 11⁄8″ plunger diameters. Contact Milton Roy
applications engineering to apply to other plunger diameters or liquid end materials.
§§ Packing/plunger codes AR, TR, VR are offered on 316 SS liquid ends with 7⁄16″ and 5⁄8″ high pressure plunger diameters. Contact Milton Roy
applications engineering to apply to other plunger diameters or liquid end materials.
§§§ Explosion proof electronic actuators are certified by Factory Mutual for Class I, Division I, Groups B, C, D; Class II, Division I, Groups E, F, G.
M PC
End Item Model Code Option Select Number
Plunger Dia.
07 = 7
⁄16″
AH = 7
⁄16″ High Press.*
10 = 5
⁄8″
BA = 5
⁄8″ High Press.*
14 = 7
⁄8″
18 = 11
⁄8″
24 = 11
⁄2″
32 = 2″
40 = 21
⁄2″*
56 = 31
⁄2″*
71 = 43
⁄4″*
Liquid End Material
1 = 316 SS
5 = Alloy 20
Connections‡‡
SE = NPT
T1 = ANSI 150 lb. threaded
T3 = ANSI 300 lb. threaded
T6 = ANSI 600 lb. threaded
T9 = ANSI 900 lb. threaded
S1 = ANSI 150 lb. socket weld
S3 = ANSI 300 lb. socket weld
S6 = ANSI 600 lb. socket weld
S9 = ANSI 1500 lb. socket weld
Base
11 = Simplex
22 = Duplex
33 = Triplex
NN = None
Gear/Shaft
Single Shaft
8F = 12.5:1
8G = 15.5:1
8H = 20.5:1
8J = 24.5:1
8K = 40.1
Double Shaft
8A = 12.5:1
8B = 15.5:1
8C = 20.5:1
8D = 24.5:1
8E = 40.1
Motor Mount
AA = None
Flange Mount
CB = Nema 56C
CC = Nema 143TC, 145TC
CD = Nema 182TC, 184TC
CE = Nema 213TC, 215TC
CF = Nema 254TC, 256TC
Metric Mount, B5 Flange
ME = 1EC 90
MF = 1EC 100
MG = 1EC 132
MH = 1EC 160
Foot Mount
FK = Nema 143T, 145T
FN = Nema 182T, 184T
FP = Nema 213T, 215T
FR = Nema 254T, 256T
Capacity Adjustment
Manual
M1 = Micrometer (316 SS)
Electronic, 4–20 mA Input
E1 = Nema 4, 115 V
E2 = Nema 4, 230 V, 60 Hz
E3 = Nema 4, 230 V, 50 Hz
EA = Exp. Pr., 115 V§§§
EB = Exp. Pr., 230 V, 60 Hz§§§
EC = Exp. Pr., 230 v, 50 Hz§§§
Pneumatic
PN = 3–15 PSI
Crosshead Material/
Suction Pressure Range†
ST = Steel/Std. Range
11 = 316 SS/Std. Range
H2 = Steel/Mid Range
HS = 316 SS/Mid Range
H3 = Steel/High Range
H7 = Steel/Max. Range
Packing Lube***
GF = Grease Fitting
IF = Internal Flush
TF = Through Flush
LR = Oiler
NN = None
Code Description Type Plunger PSI Range* Plunger Materials Oiler
range Suggested?
TM Teflon Braid 5022 AFP Compression- 7⁄16″ to 316ss or A 20
User adjust 11⁄8″ (Same as Liquid end)
BC Teflon Braid 5022 AFP required 11
⁄8
″ 0 to 1500 Ceramic No
NM Nitrile Fabric
V-Ring
to 316 ss
NR Nitrile Fabric 47⁄16″ Ceramic
Spring load 7⁄16″ to
0 to 10,000* Ceramic YesTR Teflon
self adjust 11⁄8″
Packing/Plunger Material
11. MilRoyalC
11
Milroyal C
PD 3661
Effective 6/2009
HPD MATERIALS OF CONSTRUCTION — WETTED PARTS
Materials of
Construction Diaphragm
Diaphragm
Head
Port
Connection Ball Seat Ball Check
Ball
Guide
316 SS‡
PTFE/Elastomer
316 SS
CF-8M
316 SS
CF-8M
316 SS 316 SS
316 SS
CF-8M§
Alloy 20‡
PTFE/Elastomer
20Cb-3
CN-D7M**
20Cb-3
CN-7M**
20Cb-3 20Cb-3
20Cb-D3
CN-7M*
Plastic‡
PTFE/Elastomer PVC* PVC PVC Ceramic†
PVC
Alloy C22‡
PTFE/Elastomer
Alloy C22
CX2MW††
Alloy C22
CX2MW†† Alloy C22 Alloy C22
Alloy C22
CX2MW††
NOTES:
* Polyethylene diaphragm heads on 5″ (127 mm) and 5¾″ (146 mm) plunger size.
† PTFE single ball checks used on 5″ (127 mm) and 5¾″ (146 mm) plunger size.
‡ Temperature range for metallic versions is 10°F (−12°C) to 225°F (107°C). PTFE/FKM diaphragm option is required above 190°F
(88°C). Temperature range for plastic versions is 10°F (−12°C) to 140°F (60°C).
§ CF-8M is the cast equivalent to wrought 316 SS.
** CN-7M is the cast equivalent to wrought 20Cb-3 SS.
†† CX2MW is the cast equivalent to wrought Alloy 20.
DISC DIAPHRAGM MATERIALS OF CONSTRUCTION — WETTED PARTS
Materials of
Construction
Diaphragm
Head
Cartridge
Body Seats Balls
Limit
Pins Diaphragm
Contour
Plate
316 SS*
316 SS
CF-8M†
316 SS
CF-8M† 316 SS 316 SS 316 SS PTFE
316 SS
CF-8M†
Alloy 20*
20Cb-3
CN-7M‡
20Cb-3
CN-7M‡ Alloy 20 Alloy 20 Alloy 20 PTFE
20Cb-3
CN-7M‡
NOTES:
* Temperature range is 20°F (–7°C) to 250°F (121°C).
† CF-8M is the cast equivalent to wrought 316 SS.
‡ CN-7M is the cast equivalent to wrought 20Cb-3 SS.
PACKED PLUNGER MATERIALS OF CONSTRUCTION — WETTED PARTS
Liquid
End
Material
Plunger Check
Valve
Seat Seat
Seal
Ball
Lantern
Ring/
Spacers
Packing
Spring
Gland
Cap
316 SS
316 SS
(to 1500 psi)
316 SS
CF-8M*
316 SS PTFE 316 SS
316 SS
CF-8M*
N/A
316 SS
CF-8M*
Colmonoy
(to 5000 psi)
316 SS
CF-8M*
316 SS PTFE 316 SS
316 SS
CF-8M*
316 SS
316 SS
CF-8M*
Carbide
(to 10,000 psi)
316 SS
CF-8M*
Hardened
13-8 Mo
PTFE Carbide
316 SS
CF-8M*
316 SS
316 SS
CF-8M*
Alloy 20
20Cb-3
CN-7M†
20Cb-3
CN-7M† 20Cb-3 PTFE N/A
20Cb-3
CN-7M† N/A
20Cb-3
CN-7M†
NOTES:
* CF-8M is the cast equivalent to wrought 316 SS.
† CN-7M is the cast equivalent to wrought 20Cb-3 SS.