B PHARAM 6TH SEM
PHARAMACEUTICAL QUALITY ASSURANCE
COMPLAINT
Reasons
Types of Complaint
Steps involved in Handling of complaints
Product Complaint Data Sheet
Complaint Record
Regulatory Guidelines
SOP on Complaint Handling
RECALL
Reasons
Types of Recall
Recall Classification
Levels of Recall
How to Recall the Product?
How To Notify The Consumers?
Regulatory Guidelines
SOP on Product Recall
DRUG RECALL IN 2013 AND 2014
2. • COMPLAINT
• Reasons
• Types of Complaint
• Steps involved in Handling of complaints
• Product Complaint Data Sheet
• Complaint Record
• Regulatory Guidelines
• SOP on Complaint Handling
• RECALL
• Reasons
• Types of Recall
• Recall Classification
• Levels of Recall
• How to Recall the Product?
• How To Notify The Consumers?
• Regulatory Guidelines
• SOP on Product Recall
CONTENT
2
3. Statement that is something wrong or not good
enough, which shows customer dissatisfaction about
the company and the product
Example: Complaint about packaging materials, Concerning about
the product etc.
Product
COMPLAINT
3
4. • It gives the company an opportunity to improve the quality of
the product
• It is helpful to maintain cGMP
• It maintains committed relationship between the customer and
company
• It is the regulatory obligation.
• Aid in implementing solutions to these quality problems
• Reduce costs and improve production schedules
• Reduce employee confusion
• Improve the safety and performance of devices
Reasons
4
5. • Identify poor performance in the overall quality system,
particularly faulty design of devices, and faulty manufacturing
processes
• Verify confidence in, and improve the performance of the
quality system
• Reduce medical device reporting
• Improve customer relations by reducing the frequency of
problems, complaints, and recalls; and,
• Assure compliance with device regulations and consensus
standards.
5
6. Quality complaints: Originate at consumer level and
concern with physical, chemical and biological properties
or condition of labeling and /or packaging of the product.
Adverse reaction complaints: Due to allergic reactions of
any other untoward reaction or fatal reaction or near fatal
reaction.
Other medically related complaints: Include complaints
such as lack of efficacy or clinical response.
Types of Complaint
6
7. Internal: complaint can be from production, quality control,
warehouse, marketing division.
External: complaint can be from customers, doctor, clinics,
hospitals, drugstore, pharmacy.
Verbal: complaint received by oral.
Written: complaint received in written via mail or latter
Sources of Complaint
7
8. OBJECTIVE: To lay out the procedure for investigation and
reporting the market complaints.
RESPONSIBILITY: The quality assurance manager along
with manager of the complaint related department.
ACCOUNTABILITY:
The Head, Q.A / Q.C / Regulatory shall review the
investigation report, suggest corrective actions and
approve the complaint report.
SOP on complaint handling
8
9. PROCEDURE:
9
1. Market complaint may be received from any of the following sources:
Physicians , Pharmacist , Warehouse, Patients, Regional Offices,
Hospitals Regulatory affairs, Wholesale Traders, Actual users
2. Complaints shall be classified in following categories to facilitate
investigation:
Product quality complaints (non therapeutic).
Packaging complaints (shortages and packaging error).
Medical complaints (therapeutic problems).
3. As a company policy even verbal complaints shall be formalized and
investigated.
4. All written and oral complaints to be forwarded to Head,
QA/QC/Regulatory or his nominee for investigation
5. All the Product Quality Complaints shall be investigated jointly with
QA/F and D (Formulation and Development)/Manufacturing within
5 days of the receipt of the complaint.
6. Medical complaint investigations shall be carried out jointly by
Medical department, QA, Production, F and D and Marketing
Department within 3 days of receipt of complaint
7. Packaging complaints and Quality complaints shall be jointly
investigated by QA, F and D and Manufacturing department within 10
days of receipt of complaint.
10. 8. The investigator shall investigate the complaint by referring to the Batch
Manufacturing Record, SOP, machine log tables, retain samples,
reconciliation of materials, storage conditions used and prepare the
Product Complaint Report (PCR)
9. The PCR (Annexure I) shall include the product details, details of the
complainant, quantity involved, enclosed complaint sample (if any),
details of investigation actions taken and recommended corrective actions
to prevent such recurrences in future. Each PCR shall be approved by
Head/QA/QC/Regulatory or his nominee.
10. Incase of the Head/QA/QC/Regulatory finds that investigation is not
necessary, such written records shall be maintained including reasons for
not conducting the investigation.
11.Each report shall be assigned a specific PCR number, which will be a 3 digit
number starting with “001”in continuous sequence prefixed with “PCR”
and suffixed with the last two digits of the year. For example, the first
market complaint for 2020 shall have the number PCR/001/020
12.If product defect is established or suspended in a batch,
Head/QA/QC/Regulatory will decide for checking other batches in order
to determine weather they are also affected.
13. Incase of medical complaints, if Head, /QA /QC /Regulatory and Medical
Advisor feels that the product will put the public at risk, he shall advise
immediate recall of the batch. The depth of recall is dependent on the
seriousness of the complaint.
10
11. 14.Complaint Record shall be maintained at least one year after
expiration date of medicine.
15. Complaint Record shall be reviewed and a monthly summary shall be
prepared for the management.
1 6 . A Register is maintained having the complete details of complaint for
future reference.
11
13. Step 1: Receiving Complaints
It is important to have open channels with customers in order
to receive their suggestions, doubts and complaints. Generally,
these channels are toll-free numbers, e-mails, chat-rooms and
P.O. boxes. Whatever the channel, it is necessary to have a
person in charge of receiving the complaints and in putting
them into an appropriate investigation form that shall be
addressed to the Quality Assurance (QA) unit for
investigation.
Steps Involved in Handling
of Complaints
13
14. customer
14
Make a complaint
through toll free no., E-
mails, P.O. Box
Company's
contact Person
•Open the investigation, including
information about the customer
and about the complaint(product
name, lot no., mfg & expiry date
and complaint description.)
• Ask the customer to return the
product for analysis.
QA
Complaint
Officer
15. Step 2: Technical Investigation
15
Upon receipt of the investigation form, the QA unit is able to start the
investigation, which can be divided in two phases:
Technical investigation
Documentation-based
Checking if this complaint
Occurred previously in the
same lot or if any
nonconformance was found
in the lot during its
production
Laboratory analysis phase
Requesting QC laboratory to analyze
both samples (complaint & retained).
If the customer did not send the
complaint sample for analysis, the
lab. Investigation will be carried out
only with the retained.
16. After receiving the analytical results, there are three
possible conclusions, as follows:
• Confirmed complaints.
• Non confirmed complaints.
• Counterfeit/ tamper suspicion.
1. Confirmed complaint - When both complaint and
retained samples showed out-of-specification (OOS)
results or when only the complaint sample showed
OOS results, it is clearly a single unexplained failing
product.
Example:
a single unexplained failure may be when one tablet is
missing in the intact blister strip in the complaint
sample, but no deviation was found in the retained
samples or during the in-process controls and final QC
analysis recorded in the batch record. 16
17. 2. Non-confirmed complaint - When both complaint and retained
samples showed results in compliance with specifications or when
only the complaint sample showed OOS results that cannot be
considered a single unexplained failing product.
OOS results in a complaint sample can be attributed to misuse or
mishandling, when the drug product was not kept under
appropriate conditions of temperature, humidity and light so that the
identity, strength, quality and purity of the drug product could be
affected.
Example: Tablets of the complaint sample show a change in
their appearance that is characteristic of a light, humidity or
high temperature exposure.
11
18. 3. Counterfeit / tamper suspicion - When the retained
sample is within the specification but the complaint sample is
clearly OOS with no reason for that, such as a counterfeit or
tampered drug product.
Example:
when packaging material is different from the original; an
example of tampering is when the color of the drug
product is completely different from the original or when
any foreign substance was added to the product.
11
19. The Complaint Officer must also check if the complaint
represents a serious and unexpected adverse drug experience.
The Complaint Officer and the QA Manager must sign off the
investigation form once the investigation is completed.
30 days is a reasonable time to conclude an investigation.
Complaint files should be retained for at least 1 year after the
expiry date of the lot.
11
20. Step 3: Corrective Actions and Feedback to
Customers-
20
o Corrective actions can range from a simple and quick training
to some employees to a formal Corrective Action and
Preventive Action (CAPA) handling.
The criteria for choosing appropriate action depend on the
nature of the complaint, and the complaint incidence.
If a CAPA is opened, a multidisciplinary team consisting of
representatives of QA, QC, Regulatory Affairs and Production
Management must be established.
o As feedback to the customer, the company must write a
response letter to the complainant to explain the investigation
approach taken, the results obtained and any implications, in
case the quality problem was confirmed.
21. o The customer should be sent a free replacement product
together with the response letter, since the customer returned
the product (the “complaint sample”) to the company for
analysis and a quality problem was found.
o Concerning non-confirmed complaints originating from misuse
or inadequate handling of the drug product, even if there is no
need for internal corrective actions, corrective measures should
be implemented to provide orientation to the customer.
21
22. Step 4: Monthly Reports and Trend Analysis-
22
Monthly reports should be elaborated in order to evaluate the
amount and the nature of the complaints received and to performa
trend analysis of these complaints.
The monthly reports must answer the following questions:
How many complaints did the company receive in the period?
How many were confirmed?
How many were non-confirmed or were counterfeit/tamper
suspicion?
Graphic methods of displaying data are important adjuncts to
data analysis and presentation.
The report must be readily available mainly during GMP
inspections
23. o Serial number assigned to the complaints.
o Exact nature of the complaints.
o Name of the complainants.
o Address of the complainants.
o Date of complaint received.
o If verbal, name of the person who received the complaint.
o Name of the product, strength and batch number of the
product.
o Reference to analytical record number.
Product Complaint Data Sheet
23
24. o Quantity involved in the complaint.
o Size of sample obtained from the complainant.
o Evaluation of complaint by QC department.
o Materials and records used to perform evaluation.
o Other possible effected materials, products and results of
their investigation.
o Name and signature of the investigator(s) and date.
o Action taken by the company.
o Copy of reply sent to complainant.
24
25. o Name and address of complainant;
o Name (and, where appropriate, title) and phone number of person
submitting the complaint;
o Complaint nature (including name and batch number of the bulk
product or Medicinal Product/Drug);
o Date complaint is received;
o Action initially taken (including dates and identity of person taking
the action);
o Any follow-up action taken;
o Response provided to the originator of complaint (including date
response sent); and
o Final decision on bulk product or Medicinal Product/Drug batch or
lot.
Complaint Record
25
26. Report Date Product Received Product Date Date
no. received name by lot no. investiga investiga
tion tion
started ended
Customer Complaint Record Book
26
27. A SOP should be available giving full details about how to
handle products complaints and necessary records about
complaints handled should be maintained.
A person should be designated for handling the complaints
and deciding the measures to be taken together with sufficient
supporting staff to assist him. This person should normally be
from quality management department, with sufficient
knowledge and experience in related work.
Regulatory Guidelines
27
28. If product defect is suspected in a batch, other batches should
also be checked in order to determine whether they are also
affected. In particular, other batches which may contain rework
of the defective batch should be investigated.
All decisions and measures taken as a result of a complaint
should be recorded and referenced to the corresponding batch
records.
A file regarding such drug products complaints shall be
maintained at the factory site, where the drug product involved
was manufactured, processed or packed.
Written records involving a drug product shall be maintained
until atleast 1 year after the expiration date of the drug product
or 1 year after the date that the complaint was received,
whichever is longer.
28
29. Incase of certain OTC products where expiration date is not
given the records should be maintained for atleast for 3 years
after the complete distribution of the drug product.
Complaint records shall be regularly reviewed for any
indication of specific recurring problems requiring attention
and possibly the recall of the marketed product
All decisions and measures taken as a result of a complaint
should be recorded and referenced in the corresponding batch
records.
Trend analysis should be performed in an event to identify
possible recurrent causes leading to a negative effect on a
product.
29
31. Recall is an action taken to withdraw/remove the
drugs from distribution or use including corrective
action for which deficiencies are reported in
quality, efficacy or safety.
Recalls also include drugs prohibited under the
Provisions of Drugs & Cosmetics Act and also those
products for which product licenses are
suspended/cancelled
Recall
31
32. Products which are already distributed or sold, may require at
times to be recalled from market for various reasons.
e.g. - substandard quality detected after the product was
distributed - damage of goods during transit.
Such recalled products should be clearly identified and stored
separately in a secure area until a decision is taken on their
force.
Such decision should be made as soon as possible.
Recall applies a;
Total ban or Permanent removal
Temporary ban or Temporary removal
Recalled Products
32
33. FDA authorities may order a recall for substandard quality of
the finished product or for any other justified reasons
Manufacturer himself may find problems with the product such
as:
substandard quality
problems related to the stability of the product
based on the market complaint received from a customer or
physician
Accidental damage of the consignment may also happen
during transportation
In such case product quality may not be questionable, but
packages may get damaged and cannot be sold or distributed
as such in the market, and hence required to be recalled.
Reasons
33
34. Types of Recall
34
Compulsory Product
Recall
Industries do not take the
responsibility of recalling
the product voluntarily.
Commission conducts a
“Compulsory Product
Recall”
Voluntary Product
Recall
Industries voluntarily recall
the products in consultation
with ICCC( Independent
Consumer and Competition
Commission)
Encouraged by the
commission where suppliers
recall a product as soon as a
defect is found that makes a
product hazardous or unsafe
for use or consumption.
35. CLASS I RECALLS
Class I is a situation in which there is a reasonable probability
that the use of, or exposure to, a violative product will cause
serious adverse health consequences or death.
Examples of Class I Recalls
•Pathogens in ready-to-eat food: Salmonella, Listeria monocytogenes,
E. coli, Clostridium
•High levels of sulfites
•High levels of heavy metals
•Choking hazards for susceptible populations
33
Recall Classification
36. CLASS II RECALLS
Class II is a situation in which use of, or exposure to, a
violative product may cause temporary or medically
reversible adverse health consequences or where the
probability of serious adverse health consequences is remote.
• Examples of Class II Recalls
•Foreign objects that pose a physical hazard
•Pathogens: Shigella, hepatitis A, Cyclospora, Cryptosporidium
36
37. CLASS III RECALLS
Class III is a situation in which use of, or exposure to, a
violative product is not likely to cause adverse health
consequences.
• Example of Class III Recalls
An example might be bottles of aspirin that contains 90 tablets
instead of the 100 stated on the label.
37
38. Based on the category of risks involved, a time
line of :
Within 24 hours up to a maximum of 72hours for Class I
recall
For Class II recall up to a maximum of 10 days and
For Class III recall up to a maximum of 30 days is allowed.
38
Time Lines For Effective
Recall System & Rapid Alert
39. WHOLESALE PRODUCT RECALL (Distributor)
wholesale, distribution Centre's and importers
RETAIL PRODUCT RECALL (Dealer)
supermarkets, stores, hospitals, restaurants and major retail outlets
INDIVIDUAL CONSUMER RECALL
individual consumer
Level of Recalls
39
40. 1. Product Recall Process
Product is likely to cause injury/adverse health effect to a person,
the Supplier should identify & take the necessary steps required to
recall the product, control the risk and coordinate the recall
process.
2. Level of Recall
A product can be recalled at 3 levels; wholesale, retail, individual
consumer or combination of any two or three levels.
Determination of the level of recall is dependent of how far the
product has penetrated the market from the supplier.
How to Recall the
Product?
40
41. 3. Recall Strategy
41
Supplier should develop recall strategies for various levels of recall
as specified.
Supplier should consider the following:
Notification mechanism to stop distribution and sale of
product.
How to effectively and efficiently remove potentially unsafe
product from market place
Isolation and safe storage of recovered product
Disposal of product or return of product to market
Availability of resources for remedial action.
42. 4. Product Recovery, Storage and Disposal
42
Methods of product recovery: product may be recovered by being
returned to the supplier, supermarkets, wholesellers or retailers.
Methods of product storage: recovered products must be stored in an
area that is isolated and separated from any other products.
Methods of corrective actions or product disposal:
Food products– destroyed by burial, denatured through retort and
incinerated under supervision by the relevant or appointed officers
Product for general or consumer use– returned to the manufacturers or
destroyed through the appropriate industrial practices.
5. Remedial Actions by the Supplier
The Supplier’s notification to its distribution chain and clients should
include advice on how to settle for the returned products at the wholesale,
retail and consumer level.
The notification should be clear and concise to ensure no
distribution chain and client business operations are affected
severely.
43. 6. Monitoring the Effectiveness of the Product Recall
The measurement standard is the total number of
products recovered against the total number of products
being issued.
43
Supplier must have a scale of measurement for measuring the
effectiveness of the recall.
7. Post Recall Reporting
One month after the termination of recall process, the Supplier is
required to furnish the recall coordination unit with a final report
on the recall.
The report should contain the following information with details;
a. Copy of letter to customers
b. Circumstance leading to the recall
c. Actions taken by the supplier including copies of media statement
d. Method of disposal
e. Proposed action to avoid future recurrence
f. Difficulties experienced in conducting the recall
g. Forms of assistance from government agencies and industries.
44. Public Notification
Through media coverage system
The media coverage system covers radio broadcast,
television, newspapers, TV news and current affairs
programs.
Media Release
Short, concise, clear and written in simple language.
Should contain the product recall detail, problem or hazard,
actions to take, remedial action, names, address, phone
numbers and email address of people.
How To Notify The
Consumers?
44
45. Publicity Material
45
Product information
Clear identification of supplier
Statement of hazard and associated risk
Actions consumers should take to avoid injury
Contact telephone numbers
Advice that the recall is at the expense of the supplier
47. A detailed SOP should be available and records of recall
should be maintained by the manufacturer.
A person should be designated as responsible for execution
and coordination and should be supported by sufficient staff
to handle all aspects of the recall with the appropriate degree of
urgency. This person should normally be independent of the
sales and marketing organisation.
Recall procedure should be capable of being initiated promptly
and at any time.
Regulatory Guidelines
47
48. All competent authorities of the countries to which the product
might have been distributed should be informed promptly if
products are intended to be recalled because these are being
defective (or suspected of).
The distribution records should be readily available to the
person responsible for recalls, and should contain, sufficient
information on wholesellers and directly supplied customers,
including those for exported products and medical samples.
Recalled products should be identified and stored separately
in a secured area while awaiting decision on its fate.
The program of the recall process should be recorded and a
final report issued including a reconciliation between the
delivered and recovered quantities of the product.
48
49. The effectiveness of the recall procedure should be evaluated
from time to time by a dummy recall.
A detailed check-list may be designed by the manufacturer to
recall a product.
49
50. SOP on Product Recall
OBJECTIVE:
To specify a method of operation that will ensure the prompt
and effective removal of any medicines for which XYZ
Pharmaceuticals Ltd. Is the manufacturer and which may
represent a health hazard to the consumer or user from the
market.
1. Responsibility
2. General manager (QA/QC,
Regulatory): General
Manager (Manufacturing):
3. In case of adverse event a committee evaluates the crisis. It
consists of following individuals:
- GM/QA/QC, Regulatory
- GM Manufacturing
- V.P-Marketing
- V.P – International Marketing
- GM, Formulation and Development - V.P – Technical Operations
- Medical advisor
48
51. All available members of the crisis committee shall review the crisis
and take appropriate action.
ACCOUNTABILITY
Vice President
51
1. DEFINATION
1.“Violation Medicine” means any medicine for which XYZ
Pharmaceuticals Ltd is the manufacturer and,
2. which is reported to be causing serious adverse health reactions-not
include in the package insert and/or
3.With regard to which reports of serious adverse health reactions
described in the package insert are being received with unacceptable
frequency, and/ or
4. which has a material formulation error, or other errors, and/ or,
5. Which has a material labelling error, or other errors, and/or,
6.Which has a result of on going stability studies, is found not to
comply with the release specifications.
52. PROCEDURE
52
1.Any employee of XYZ Pharmaceutical Ltd becoming aware of
“Violative medicine” immediately notifies the GM, QA/QC/Regulatory
or in his absence GM, Manufacturing.
2.If the GM, QA/QC/Regulatory or GM, Manufacturing, is of opinion that
the violation is of a sufficiently serious nature to possibly warrant a
medicine recall, he shall immediately quarantine existing in-house stocks
of the relevant medicines and obtain the following information :
a) The product name, strength, packs size, batch number,
Manufacturing Date and Expiry Date.
b) The total number of units released for sale.
c) The Date on which distribution commenced.
d) The total number of units distributed.
e) The number of units still in stock in factory and with stockiest(s)
through the Market.
f) The nature of reported violation.
The above information is recorded on the attached document “Medicine
Recall Control document” under “Product Information” (Annexure- 2)
53. 3.In the light of above information GM-(QA/QC/Regulatory) or GM-
(Manufacturing) or GM-(Formulation and Development) evaluates the
health hazard presented by the medicine and documents this evaluation
on the attached document “Medicine Recall Control Document” under
Health Hazard Evaluation (Annexure-3).
4.Taking into consideration the available information as well as the
health hazard evaluation the GM-(QA/QC/Regulatory) formulates a
proposed recall strategy. The recall strategy specifies the nature of
communication to be used (phone, fax, telegram, letters, telemail, etc.) as
well as the level in the distribution chain to which recall is
extended.(wholesalers, retailers, general public, etc.)
5.The GM-(QA/QC/Regulatory) or GM-(Manufacturing) informs
concerned Regulatory Authorities in India and other countries as
appropriate to the distribution of the medicine. Relevant records shall be
submitted to Regulatory Authorities together with proposed plan of
action.
53
54. 6.If the proposed plan of action meets with the Regulatory Official’s
approval, or if a modified recall strategy has been decided upon in
conjunction with the Regulatory Official’s, the GM-(QA/QC/Regulatory)
or GM-(Manufacturing) documents the recall strategy on the attached
document “Medicine Recall Control Document” under Recall Strategy
(Annexure 4).
7.The GM-(QA/QC Regulatory) or GM-(Manufacturing) implements
recall without delay.
8.The GM-(QA/QC Regulatory) or GM-(Manufacturing) prepares an
interim reconciliation report after 30 days and submit a copy to concerned
Regulatory Official’s.
9.The GM-(QA/QC Regulatory) or GM-(Manufacturing) prepares a final
reconciliation report after 90 days and submits a copy thereof to the
concerned Regulatory officials for information as a final reconciliation and
verification of the success of recall (Annexure-5). Relevant records shall be
filed.
54
55. Prior to termination or completion of Medicine Recall the following
points shall be given due consideration:
- Method of destruction of the product in field.
- A designed area to receive returned medicines.
- Inventory of the returned medicine.
- Destruction authorization.
11.The Medicine Recall will be terminated when the GM, QA/QC
Regulatory or GM Manufacturing are assured that recall has been
reasonably completed and a “medicine recall status report” (Annexure-6)
is completed.
12.Export Products : Recall notifications related to exported products to
relevant Regulatory Authorities, Applicants, Agents and Distributors
loaded in the importing countries shall be informed. GM-
(QA/QC/Regulatory) or GM-(Manufacturing) shall be responsible for
passing on this information.
4.2.13 GM-(QA/QC/Regulatory) or GM-(Manufacturing) shall prepare a
“ Standardized recall letters” and “Press Statement” as given in
(Annexure-7) and (Annexure-8) respectively. 53
56. After the authorization by GM-(QA/QC Regulatory) or GM-
(Manufacturing), the recalled material along with stock in hand shall be
destroyed. The same shall be indicated in the final reconciliation report
(Annexure-5) with action initiated to avoid recurrence and shall be
forwarded to concerned Regulatory Authorities.
54
57. Date Brand Name Product Description Reason/ Problem Company
30 June 2013 Nexus,APP
Benztropine Mesylate
Injection
Glass particles Fresenius Kabi USA
19 June 2013 Rugby
Enteric CoatedAspirin
Tablets,81 mg
May Contain
Acetaminophen 500 mg
tablets
Advance Pharmaceutical
Inc.
13 June 2013
Sagent Pharmaceuticals,
Inc.
Vecuronium Bromide for
Injection
Due to elevated impurity
levels
Sagent Pharmaceuticals,
Inc.
11 June 2013 Bethel Weight Loss Pills
Contains Undeclared
Drug Ingredient
Bethel Nutritional
Consulting, Inc.
10 June 2013 ZyGenerics Warfarin 2 mg Tablets Oversized tablet
Zydus Pharmaceuticals
USAInc.
25 May 2013 Fresenius Kabi USA
Magnesium Sulfate
Injection USP
Glass Particles Fresenius Kabi USA
Drugs Recalled in 2013
58. 56
Date Brand Name Product Description Reason/ Problem Company
03 October 2014 Cadolac Ketorolac Due to labelling the Cadila Healthcare
Tromethamine product with Limited
Injection incorect expiration
date
13August 2014 Idarubicine Idarubicine Discovery of red Teva UK Limited
Injection precipitation
28 July 2014 Buccolam Midazolam Chemical ViroPharma SPRL
hydrochloride contamination
oromucosal soln
19 June 2014 Fybogel Isapghula husk Potential risk of Reckitt Benckiser
contamination with Healthcare
metal particles
06 March 2014 Viread Tinofovir Presence of silicone Gilead sciences
disoproxil fumarate rubber limited
(245mg film coated
tablet)
17 Feb 2014 COSOPT Dorzolamide/ Increase in the Merc sharp &
Preservative-Free Timolol eye drops number of adverse Dohme limited
solution events & product
complaints relating
to difficulty in
administration
Drugs Recalled in 2014