The document discusses various hydraulic components including motors, gearboxes, winches, and track undercarriages. It provides specifications for multiple models of hydraulic motors, gearboxes, and winches. The models listed include the GN, NAM, LA2FE, and LA2FM series of hydraulic motors, the BFT series of track drives, KFB series of swing drives, and BFT-W series of winch drives.
Caterpillar cat gc55 k forklift lift trucks service repair manual snat88a 202...fksepdksejdmm
This service manual provides information for servicing the chassis and mast components of various Cat lift truck models. It includes 12 sections covering general information, cooling, electrical, powertrain, transmission, front and rear axles, brakes, steering, hydraulics, masts/forks, service data, and a group index. The document lists specifications, components, removal/installation procedures, inspections, adjustments, and troubleshooting guides for the major vehicle systems. Serial number locations, dimensions, and technical data are provided for each truck model.
Caterpillar cat gc55 k str forklift lift trucks service repair manual snat88a...fisdkjekemms
This service manual provides information for servicing Cat lift trucks with GM4.3L gasoline engines. It covers vehicle exterior features, models, dimensions, specifications, and repair and maintenance information for major vehicle systems including cooling, electrical, powertrain, transmission, front and rear axles, brakes, steering, hydraulics, masts and forks. The manual is organized into 12 groups covering topics from general vehicle information to specific component repair and replacement. Model-specific information is provided for various GC-series trucks.
Caterpillar cat gc40 k str forklift lift trucks service repair manual snat87a...fjjskekdmem
This document provides specifications and technical data for Cat lift truck models GC35K through GC70K STR, including:
- Dimensions such as maximum lift height, overall length, width, height, tread, and wheelbase.
- Performance specifications for lifting capacity, lift and travel speeds, minimum turning radius, and gradeability.
- Component information on tires, weights, and engine type.
- An index listing the groups of information covered in other sections of the service manual, such as cooling system, electrical system, power train, and hydraulics.
Caterpillar cat gc55 k str forklift lift trucks service repair manual snat88 ...ufsikkdjskemds
This service manual provides information for servicing Cat lift trucks with GM4.3L gasoline engines. It covers vehicle exterior features, models, dimensions, specifications, and repair and maintenance information for major vehicle systems including cooling, electrical, powertrain, transmission, front and rear axles, brakes, steering, hydraulics, masts and forks. The manual is organized into 12 groups covering topics from general vehicle information to specific component repair and replacement. Model-specific information is provided for various GC-series trucks produced between the years shown in the model charts.
This document provides specifications for various hammer models made by TOPA. It includes information on the applicable excavator size, model number, weight class, chisel diameter, impact energy, and other technical specifications. The hammer models are organized in tables with headings identifying the manufacturer, model names, and key specs. Partnership locations are also listed.
This document provides specifications for various hammer models made by TOPA. It includes information on operating weight, overall length, operating oil pressure, oil flow, blow frequency, chisel diameter, impact energy, and applicable excavator tonnage for each hammer model ranging from small handheld breakers to large excavator mounted heavy duty breakers. The document also lists compatible excavator, carrier, and attachment models for each hammer.
This document provides specifications for NEMA 34 I-Grade motors and encoders produced by QuickSilver Controls, including:
- Torque curves for various motor models showing torque output over speed range for different voltage inputs.
- Electrical specifications for the encoder interface and motor memory chip.
- Connector pinout diagrams for the motor power and encoder signals.
- Mechanical dimensions and specifications for the motor bodies and shafts.
- Options for IP65-rated connectors and housings for harsh or wet environments.
- Recommended QuickSilver motor controllers to operate the motors.
This document provides specifications for various compressor models in the CWI, CWF, and CWS supply programs. It lists technical details like dimensions, weight, motor power, flow rate, and type code for each model. The models vary in maximum operating pressure from 4 to 300 bar and are available in either air cooled, water cooled, or packaged configurations. Specifications are provided for ranges of each parameter and subject to change without notice.
This document provides specifications for the SF5S80 transmission. It lists the transmission's main parameters such as rated power input, maximum speed, and maximum torque. It also includes a table showing the gear ratios for each gear. Additional details provided are the odometer ratio options, shift ways, installation length and form, oil capacity, total weight, and automobile matching.
Caterpillar cat gc40 k forklift lift trucks service repair manual snat87a 202...fjjsekkmdmes
This service manual provides information for servicing Cat lift trucks with GM4.3L gasoline engines. It covers vehicle exterior features, models, dimensions, technical specifications, and maintenance and repair instructions for systems including cooling, electrical, powertrain, transmission, front and rear axles, brakes, steering, hydraulics, masts and forks. The manual is organized into 12 groups covering general information, components, specifications, removal/installation, and troubleshooting. It applies to various GC series truck models produced between specific serial number ranges.
Bảng giá LS 2019 - Bảng giá mới sẽ áp dụng từ ngày 20.0.2019
Để cập nhật các bảng giá mới lĩnh vực thiết bị điện Công
Nghiệp.Quý khách vui lòng vào link bên dưới
https://www.dienhathe.com/download/bang-gia-dien-cong-nghiep/?filter_nam=2019&filter_tai-lieu=bang-gia
The document describes Quick Connect Gearheads from Harmonic Drive that provide precision gearing for motion control applications. The gearheads feature zero-backlash transmission, high torque capacity, and easy mounting to motors. They are available in different sizes and gear ratios to suit various motor powers. The document provides specifications on torque ratings, dimensions, bearings, and ordering information.
This document provides specifications for two gearmotor models, the 017SPX and 023SPX. It includes dimensions, torque ratings, electrical specifications, and operating temperature ranges. Connection diagrams are provided for both motors showing the wiring sequence for clockwise rotation. Additional information is given on housing materials, gear and bearing types, and direction of rotation.
This document provides context about rail infrastructure data management and discusses an agile development approach. It introduces Eric Hendriks, who has 20 years of software experience including the last 10 years focusing on Java development, agile methods, and independent contracting. He provides his personal view on managing rail infrastructure data through an agile design that keeps information synchronized across domains and stakeholders.
Catalogue of Medium Gear Motors from VEER MotorGear Motor
Veer Motor is a global Industry leader for innovative, energy-efficient geared reducer motor solutions. Veer Motor's wide product range includes helical geared motors, shaft-mounted geared motors, bevel-geared motors, worm geared motors, brushless motors, servo motors, brushless motor drives and servo drives.
Mitsubishi fd50 n forklift trucks service repair manual sn ef28c 50001-uphfjsekekmmd
This document provides a service manual for lift trucks, covering their cooling systems. It includes specifications, structure, removal/installation procedures, inspection/adjustment guidelines, and troubleshooting information. The cooling system uses a water-cooled, forced circulation design with a corrugated fin radiator, centrifugal water pump, and wax pellet thermostat. Removal of the fan belt requires loosening the tension assembly pulley lock bolt and alternator lock bolt. Inspection involves checking the fan belt, radiator, hoses, and coolant level/condition. Troubleshooting aids in resolving cooling system issues.
Claas xerion 5000 4000 tractor parts catalogue manual (sn 78400111-78499999)dujfjjksekmmd
This document provides parts information for diesel engines and components. It includes 7 engine options from OM470 to OM471 models with power ratings ranging from 337 to 390 kW. It also lists parts for an engine suspension system, fuel tank, additional fuel tank, and their specifications.
Mc cormick c max tier 3 (2008- ) - rs22 - 100 tractor service repair manualufjjsjkkskemmd
This document provides parts information for various engine components. It includes lists of parts with identification numbers, references to other documents, and notes on serial number ranges and replacement parts. The parts are for engines used in McCormick tractors and include items like pumps, cylinders, pistons, rods, valves, and other internal engine components. Application information and diagrams are also provided to identify the appropriate parts for different tractor models.
This document provides information on PTG GC gear couplings, including:
1) The GC coupling line-up covers shaft sizes up to 1000 mm and torques up to 16,000,000 Nm. Standard materials include steel for hubs and sleeves.
2) Dimensions, specifications, and torque ratings are provided for various GC coupling models from GC-50 to GC-1000 in a table.
3) Additional information is given on available materials, seals, hardware, shaft attachments, and lubrication methods for GC couplings.
Browse Single Phase Induction Motor catalogue for Bharat Bijlee, Siemens, ABB, Krisloskar at Shopelect. Checkout Single Phase Induction Motor price list for Squirrel Cage Motors, AC Motors, EFF2, Frame Motor.
The TK pin coupling is a reliable coupling that allows for misalignments between connected shafts while also damping vibrations. It is popular in mining applications and has a long lifetime with no maintenance apart from visual inspections. The flexible elements that dampen vibrations can be replaced without moving the connected machines and come in various materials suitable for different operating conditions. The coupling is available in sizes up to 2000mm in diameter and can be customized for different drives.
(http://www.sabarelectricmotor.com) The journey of the Sabar Group commenced in the year 1975 when Sabar started its first unit for the manufacture of electric motors. Unbounded passion, unmatched skill & uncompromising quality controlled the group from one success to another.
The document provides contact information for the headquarters and branches of Mitsubishi Electric Vietnam including addresses and phone numbers. It also lists some of Mitsubishi Electric's products and services offered in Vietnam such as low voltage switchgear, automation equipment, inverters, circuit breakers, contactors, industrial robots, and NC control systems. The company states that its manufacturing follows Japanese quality standards and ISO certifications.
ac motor speed reducer,AC vertical electro motor with 30:1 gearbox,ac motorLance Shi NER GROUP
NER GROUP LIMITED is a professional manufacturer and exporter of gear reducers, geared motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-1856
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-18563806647
The document describes Harmonic Drive's SHD-2UH-LW series of lightweight hollow shaft gear units. These units feature a large hollow input shaft, robust cross roller bearing, and optimized lightweight design, making them more compact and up to 15% lighter than previous gear unit models. A table provides specifications such as size, gear ratio, torque, speed, weight, and part number for each unit in the series.
The document provides technical specifications for KAPPA pump and motor units. It describes that KAPPA units consist of a cast iron housing and flange with high mechanical specifications. They are available with mounting flanges and side or rear ports according to standards. The compact design and rigid assembly provide reliability and high efficiency even at high pressures. Each component is carefully designed and manufactured to provide consistent and balanced performance under demanding conditions. The KAPPA series is suitable where size, noise, contamination and non-flammable fluids are critical factors.
Tokai produces industrial tires for forklifts and other equipment. They offer solid tires that provide outstanding performance, wear resistance, traction and safety compared to pneumatic tires. Tokai invests heavily in research and development to create tires using advanced computer modeling and testing techniques. Their tires use a three-layer compound system in the tread, cushion and base layers to optimize performance properties.
The Rosenberg Group produces axial and centrifugal fans for applications such as transformer cooling. They have 350 employees in Germany and 1400 worldwide. Their centrifugal fans come in sizes from 250-630mm and feature aluminum impellers and external rotor motors. Their axial fans range from 450-800mm and have sickle-shaped aluminum blades and external rotor motors. Both fan types are suited for transformer cooling applications as they help dissipate heat and cool the transformer, allowing for higher loads, improved efficiency, and longer life.
Costo referencial de posecion y operacionDeyvis Ubaldo
The document appears to be listing various types of construction equipment along with their weights, fuel consumption rates, and other specifications. It includes sections for equipment used for drilling, earthmoving, compaction, and other construction tasks. For each piece of equipment, it provides details like power, weight, fuel consumption in hours or kilograms, and estimated daily and monthly operating costs.
This document provides technical specifications for various types of bucket elevator chains and components. It includes details on central chains for centrifugal discharging bucket elevators such as chain type, pitch, dimensions, attachments, and average breaking load. Double strand chains are also specified with roller type, pitch, plate and pin dimensions, and average breaking load. Technical data is provided for buckets, sprockets, and other attachments. Installation and maintenance manuals are also referenced.
This document provides technical specifications for Sicme Motori's SM-ML series of steel mill heavy duty DC motors. It includes details on:
- Motor design features for frames 802-804 and 806-818, including laminated cores, roller bearings, and optional components.
- Output data like power, speed, torque, and duty ratings for each frame size at 230V.
- Dimensional drawings and specifications for frames 802-804 and 806-812.
- Air flow requirements, weights, enclosure types and other technical details for each frame size.
The SM-ML series motors are designed for variable speed drives in heavy industrial applications like steel mills. They meet
Kollmorgen nema 34_n3_k3_stepper_systems_tb_specsheetElectromate
The document provides specifications for Pacific Scientific N&K-Series NEMA 34 high torque motors, including torque, current, resistance, inductance, detent torque, thermal resistance, and inertia ratings for various motor models. It also lists features and benefits of the motor series such as high torque capability, improved torque linearity, rugged construction, and optional encoder mounting provisions.
The document provides specifications for Pacific Scientific N&K-Series NEMA 34 high torque motors, including torque, current, resistance, inductance, detent torque, thermal resistance, and inertia ratings for various motor models. It also lists features and benefits of the motor series such as high torque capability, improved torque linearity, rugged construction, and optional encoder mounting provisions.
The document summarizes a brushless servo motor product, the MDM-5000, produced by Electromate. It has the following key points:
1. The MDM-5000 has the highest torque density in its class due to its cut-core stator lamination technology, high slot-fill windings, and high flux neodymium magnet array.
2. It is available in 4 sizes with continuous stall torque ranging from 0.5Nm to 27.5Nm.
3. Electromate can customize the MDM-5000 to fit specific applications and requirements, including various winding, brake, gearbox, termination, and cabling configurations.
Aluminum Housing,aluminum Used Marine Gearbox,Angle Bevel GearboxLance Shi NER GROUP
NER GROUP LIMITED is a professional manufacturer and exporter of gear reducers, geared motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-1856
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-18563806647
1. 02
Content
Hydraulic Motor
Ø GN series Hydraulic Motor
Ø NAM series Hydraulic Motor
Ø LA2FE series Hydraulic Motor
Ø LA2FM series Hydraulic Motor
Ø BM series Orbital Motor
Planetary Gearbox
Ø BFT series Track Drive
Ø KFB series Swing Drive
Ø BFT-W series Winch Drive
Ø GFR series Planetary Gearbox
Ø BL300 series Planetary Gearbox
Hydraulic Winch
Ø GW3A series Hydraulic Winch
Ø BG series Hydraulic Winch
Ø GW series Hydraulic Winch
Ø AF series Hydraulic Winch
Track Undercarriage
Hydraulic Recovery Winch
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
kemercn@hotmail.com
Hydraulic Specialist
4. 07 08
HMM
BM1 S PortBM1 Line PortBM1 H PortBM2
BM6
BM3
Motor balance valve Motor relief valve
Wide range of hydraulic motors & valves
Wheel Motor
BM4
BM5BM5 bearingless
BM6 bearingless
4K
BMT
Motor with
Speed sensor
sotoss ssssor orss sssssssors or
s ssorssSize ssss orsorsor
sotoss ssssor orss sssssssors or
s ssorssSize ssss orsorsor
BFT series Track Drive is an ideal driving component for wheel or
track driving vehicles, and other moving equipment and widely
applied in excavator, spreading machine, drill machine, mobile
crusher, engineering machinery, mining, tunnel machinery,
agricultural machinery, etc. Meanwhile, different motor connectors
and dimensions are available on request. It is an ideal replacement
of Rexroth products.
KFB series swing drive is an ideal driving component for truck
crane, crawler crane, ship crane and excavator, and other wheeling
equipments. The structure is quite compact, especially suits those
space-critical equipment. Meanwhile, different motor connectors and
dimensions are available on request. It is an ideal replacement of
Rexroth products.
BFT W series winch drive is an ideal driving component for
hoisting mechanism. It has been widely applied in winding gear of
truck crane, crawler crane, ship crane and harbor crane. Because of
its compact structure, it can be installed in reel for saving space.
Meanwhile, different motor connectors and dimensions are available
on request. It is an ideal replacement of Rexroth products.
.å) .. ....FT FT.. .......FT. FT
. ..FT..ose .... FT.FT.FT
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
5. 09 10
Swing drives with hydraulic motor in bent axis design A2FM/E
Type/Version KFB 17 T2 KFB 17 T3 KFB 26 T2 KFB 36 T2 KFB 36 T3
Output Torque, crane
T2
Max
Nm 12700 12700 16500 28500 28500
Output Torque, excavator
T2
Max
Nm 7700 7700 10000 17500 17500
Ratio I 17.3-45.7 79-105.6 31.4-63 20.7-28.9 68-117.6
Hydraulic Motor A2FE63 A2FE32 A2FE90 A2FE107
A2FE90
A2FM45
A6VM55
Weight without Motor (approx.) kg 130 130 240 260 225
Type/Version KFB 50 T3 KFB 60 T2 KFB 60 T3 KFB 80 T3 KFB 110 T3
Output Torque, crane
T2
Max
Nm
38000
48500 48500 68300 93300
Output Torque, excavator
T2
Max
Nm
22000
27800 27800 38200 52000
Ratio I 126.7-147.4 40.4 87.5-170.9 62.3-186.4 174.9
Hydraulic Motor
A2FE125
A2FM63
A2FE125
A2FE125
A2FM90
A2FE125
A2FM90
A2FE90
A6VM200
Weight without Motor (approx.) kg 315 390 425 540 680
KFB 220 T3 KFB 330T3
Output Torque, crane
T2
Max
Nm 213000 290000
Output Torque, excavator
T2
Max
Nm 116000 158000
Ratio I 189.9, 247.0, 294.0 169.8, 210.8, 253.0, 303.4
Hydraulic Motor
A2FM180
A2FM200
A2FM250
A2FM180
A2FM200
A2FM250
Weight without Motor(approx.) kg 1270 1580
Type/Version BFT 7 T2 BFT 9 T2 GFT 13 T2 BFT 17 T2 BFT 17 T3
T2
Max
Ratio I 30.9-62.6 38.3-47.6 16.3-60.2 6.4-54 78-102.6
A2FE56 A2FE63 A2FE56
A6VE55 A6VE55 A6VE55
A10VE63
A10VM45
Weight without
Motor (approx.)
kg 45 67 92 90 97.5
Type/Version BFT 24 T3 BFT 26 T3 BFT 36 T3 BFT 50 T3 BFT 60 T3
T2
Max
Ratio I 90.1-137.2 42.9-62 67-161 66.3-146.4 94.8-197
A2FE63 A2FE90 A2FE90 A2FE125 A2VE125
A10VE45 A6VE80 A10VE80 A6VE107 A6VE107
Weight without
Motor (approx.)
kg 105 150 170 220 240
Type/Version BFT 80 T3 BFT 110 T3 BFT 160 T3 BFT 220 T3
T2
Max
Ratio I 76.7-185.4 95.8-215 161.8-251 97.7-365
A2FE180 A2FE180 A2FE180 A2FE180
A6VE160 A6VE160 A6VE160 A6VE160
A6VM355
Weight without
Motor (approx.)
kg 350 395 680 830
Hydraulic Motor
Output Torque,
crane
Nm 8000 110000 160000 220000
Hydraulic Motor
A10VE45
Output Torque Nm 26000 36000 50000 60000
Hydraulic Motor A10VM45
24000
9000 13000 17000 17000Output Torque Nm 7000
For above specification, it is just for reference. For more specification, please contact us.
Note:
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
6. 11 12
16MPa 20MPa
GFR2.5-850 830 2350 0-100 0.88-0.9 GN 05-170 C2.5-5 Z2.5
GFR2.5-950 955 2706 0-100 0.88-0.9 GN 05-200 C2.5-5 Z2.5
GFR2.5-1050 1050.5 2976 0-100 0.88-0.9 GN 05-200 C2.5-5.5 Z2.5
GFR3-1450 1450 4022 0-90 0.88-0.9 GN 1-300 C3-5 Z3
GFT3-1700 1735 4823 0-90 0.88-0.9 GN 2-350 C3-5 Z3
GFR3-1900 1908 5306 0-80 0.88-0.9 GN 2-350 C3-5.5 Z3
GFR3-2300 2338 6492 0-75 0.88-0.9 GN 2-420 C3-5.5 Z3
GFR4-3000 2975 8398 0-80 0.9-0.91 GN 3-600 C4-5 Z4
GFR4-4000 3960 11222 0-80 0.9-0.91 GN 3-800 C4-5 Z4
GFR4-4400 4356 12344 0-70 0.9-0.91 GN 3-800 C4-5.5 Z4
GFR5-5700 5714 16056 0-65 0.9-0.91 GN 5-1000 C5-5.5 Z5
GFR5-6700 6700 18915 0-70 0.9-0.91 GN 5-1300 C5-5 Z5
GFR5-8150 8170 22987 0-70 0.9-0.91 GN 5-1600 C5-5 Z5
GFR5-9000 9080 25612 0-70 0.9-0.91 GN 5-1800 C5-5 Z5
GFR5-11000 11039 31159 0-50 0.9-0.91 GN 5-2000 C5-5.5 Z5
GFR6-12500 12565 35476 0-40 0.9-0.91 GN 6-2500 C6-5 Z6
GFR6-15200 15205 42987 0-40 0.9-0.91 GN 6-3000 C6-5 Z6
GFR6-16500 16725 47286 0-30 0.9-0.91 GN 6-3000 C6-5.5 Z6
GFR6-20000 19860 57141 0-30 0.9-0.91 GN 6-3600 C6-5.5 Z6
GFR7-21500 21490 61902 0-35 0.9-0.91 GN 7-4300 C7-5 Z7
GFR7-23650 23639 68092 0-30 0.9-0.91 GN 7-4300 C7-5.5 Z7
GFR9-33000 33180 70000 92928 0-15 0.9-0.91 GN 9-6600 C9-5.0 Z9
GFR9-38500 38480 81200 107800 0-15 0.9-0.91 GN 9-7700 C9-5.0 Z9
GFR9-48400 48598 102500 0-15 0.9-0.91 GN 9-8800 C9-5.5 Z9
GFR9-66000 66143 139600 0-15 0.9-0.91 GN 9-12000 C9-5.5 Z9
Rated torque
Model
Total
displacement
(ml/r)
Speed
(rpm)
Total Efficiency Hydraulic Motor Planetary Gearbox Brake
Type/Version BFT 17 W2 BFT 17 W3 BFT 24W3 BFT 26 W2
T2
max
Ratio I 26.4-45.4 77.9-102.6 90.1-137.2 42.9-62
A2FE63 A2FE63 A2FE63 A2FE90
A6VE55 A6VE55 A6VE55 A6VE107
Cable force KN 67 74 99 84
Weight without
Motor (approx.)
105 115 130 140
Type/Version BFT 36 W3 BFT 60 W3 BFT 80 W3 BFT 110 W3
T2
max
Ratio I 67-138.9 63.8-169.9 61.3-185.4 79.5-215
A2FE90 A2FE90 A2FE180 A2FE180
A6VE80 A2FM250 A2FM200 A2FM250
A6VE107 A6VE160 A6VE160
A6VM250 A6VM250 A6VM250
Cable force KN 118 164 231 300
Weight without
Motor (approx.)
kg 155 230 430 515
Type/Version BFT 160 W3 BFT 220 W3
T2
max
Ratio I 161.8-251 97.7-293
A2FE180 A2FE180
A6VE160 A2FM200
A6VE160
A6VM250
Cable force KN 373 471
Weight without
Motor (approx.)
kg 680 850
Hydraulic Motor
200000Output Torque Nm
100000
140000
Hydraulic Motor
42500 67000Output Torque Nm 26000
Hydraulic Motor
14000 19000 18000Output Torque Nm 14000
1795
2065
2270
3130
3750
4120
5040
6400
8550
9400
12355
14480
17600
19600
23850
27100
32800
36100
42900
45300
49900
128250
174550
For above specification, it is just for reference. For more specification, please contact us.
Note:
For above specification, it is just for reference. For more specification, please contact us.
Note:
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
7. 13 14
BL300 SERIES PLANETARY GEARBOX Range of ratios
Type Rated
torque
(Max.)
(N.m)
Rated
power
(KW)
Input
speed
(Max.)
(rpm) Inline
Right angle Combined with worm gear
Design
BL300 1000 20 3000 3.3-2700 7-800 400-9000 A
BL301 1750 30 3000 3.3-2700 7-800 400-9000 A
BL303 2500 40 3000 3.6-2900 9-900 400-9000 A
BL305 5000 60 3000 3.6-2900 9-900 400-9000 A
BL306 8500 75 2500 3.7-2900 9-900 400-9000 A
BL307 12500 100 2500 3.4-2500 13-800 400-9000 A
BL309 18500 130 2500 3.4-2500 13-800 400-9000 B
BL310 25000 150 2000 3.8-2500 40-900 400-9000 B
BL311 35000 180 2000 4-2200 18-800 400-9000 B
BL313 50000 200 2000 4-2200 18-800 400-9000 B
BL315 80000 250 1500 4-2000 70-900 400-9000 B
BL316 105000 270 1500 4-2000 50-600 400-9000 B
BL317 150000 300 1000 4-1900 70-900 400-3000 B
BL318 200000 340 1000 4-1100 200-700 400-9000 B
BL319 300000 380 500 4-1400 300-800 1000-9000 B
BL321 450000 450 300 4-1100 300-800 1000-9000 B
Dimensions
Type D1 D2 D3 D4 L1 L2 L3 L4 L5 Design
BL300 185 40 36 DIN 5482 19Z 38 42 61 58 100 14 50 A
BL301 185 40 36 DIN 5482 19Z 50 42 61 82 132 14 50 A
BL303 245 58 DIN 5482 28Z 60 75 83 105 160 15 85 A
BL305 245 53 DIN 5482 28Z 60 75 83 105 160 15 85 A
BL306 292 70 64 DIN 5482 34Z 80 90 130 130 180 40 115 A
BL307 348 80 74 DIN 5482 39Z 90 100 162 170 200 36 120 A
BL309 348 80 DIN 5482 39Z 100 120 231 165 225 82 245 B
BL310 400 100 94 DIN 5482 32Z 110 130 290 210 250 95 290 B
BL311 428 100 DIN 5482 32Z 120 135 320 210 280 88 190 B
BL313 445 120 3 DIN 5480 39Z 140 145 357 200 280 81 235 B
BL315 542 150 DIN 5480 29Z 160 180 429 240 315 98 260 B
BL316 670 170 DIN 5480 33Z 180 180 275 260 400 145 265 B
BL317 695 200 DIN 5480 39Z 200 260 352 260 415 152 318 B
BL318 800 220 DIN 5480 43Z 250 220 340 330 500 155 305 B
BL319 940 260 5 DIN 5480 51Z 280 350 470 380 550 210 440 B
BL321 1100 300 8 DIN 5480 59Z 340 390 500 540 650 250 440 B
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
8. 15 16
1st layer top layer
BG500 500 380 63 6 67 14 40
BG800 800 680 54 8 53 14 50
BG1100 1100 870 41 8 53 14 50
BG1300 1300 1000 45 9 48 14 55
BG1500 1500 1200 42 10 60 21 55
BG2000 2000 1600 35 10 60 21 55
BG2500 2500 2000 52 12 52 21 100
BG2600 2600 2000 54 12 76 21 100
Working
pressures diff.
(Mpa)
Flow Rate
(L/min)
Model
Pull Force (KN)
Rope Speed
(m/min)
Diameter
of rope
(mm)
Capacity
of rope
(m)
1. Floating type planetary gearbox, smooth operation and reasonable structure.
2. Normally closed friction type brake, high braking torque, safe and reliable operating.
3. Small volume, compact structure and high transmission efficiency.
4. Long life Danfoss hydraulic orbit motor
5. M ounting frame is available on request.
6. Balance valve, shuttle valve, limit switch and other accessories are also available on request.
For above specification and dimensions, it is just for reference. For more, please contact us.
Meanwhile, we can customise the products based on your requirements.
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
9. 17 18
1.
2.
3.
4.
5.
6.
One-or two-stage planetary gearboxes, smooth operation and reasonable structure.
Normally closed friction type brake, high braking torque, safe and reliable operating.
Small volume, compact structure and high transmission efficiency.
Radial piston hydraulic motor with long life operating.
Mounting frame is available on request.
Balance valve, shuttle valve, limit switch and other accessories are also available on request.
Pull
Force
(KN)
Rope
Speed
(m/min)
GW2.5-10-60-10-ZP 10 0-30 238 575 15.0 10 60 GN 05-110D51 C2.5-5
GW2.5-20-50-12-ZP 20 0-30 238 1050 17.0 12 50 GN 05-200D51 C2.5-5.5
GW3-30-65-15-ZP 30 0-35 305 2125 15.9 15 65 GN 2-420D51 C3-5
GW3-40-60-16-ZP 40 0-35 305 2711.5 16.4 16 60 GN 2-500D51 C3-5.5
GW4-50-70-20-ZP 50 0-40 380 4365 16.3 20 70 GN 3-900D240101 C4-5
GW4-60-68-21.5-ZP 60 0-40 380 5428.5 16.0 21.5 68 GN 3-1000D240101 C4-5.5
GW5-80-100-24-ZP 80 0-40 470 9080 15.6 24 100 GN 5-1800D240101 C5-5
GW5-100-90-28-ZP 100 0-40 470 11039 16.0 28 90 GN 5-2000D24010 C5-5.5
GW6-120-176-30-ZP 120 0-30 600 16725 17.0 30 175 GN 6-3000D480101 C6-5.5
GW6-150-150-34-ZP 150 0-25 600 16725 19.8 34 150 GN 6-3000D480101 C6-5.5
Gearbox
Model
Working
pressures diff.
(Mpa)
Diameter
of rope
(mm)
Capacity of
rope (mm)
Hydraulic motorModel
The 1st layer
Diameter of
reel bottom
(mm)
Total
displacement
(ml/r)
Model D D1 D2 D3 A B S X L L1 L2 L3 L4 L5 L6
GW2.5 238 342 15 G1" 197 G1/4" 260 650 382 30 368 395 245
GW3 305 450 19 G1" 255 G1/4" 320 735 482 40 502 450 350
GW4 380 600 21 M33*2 336 G1/2" 372 892 564 45 636 660 500
GW5 470 720 21 M33*2 380 G1/2" 510 1158 696 70 775 750 500
GW6 600 1022 28 M33*2 570 G1/2" 866 1583 770 80 895 1092 570
For above specification and dimensions, it is just for reference. For more, please contact us.
Meanwhile, we can customise the products based on your requirements.
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
10. 19
1. Two-or three-stage planetary gearboxes, smooth operation and reasonable structure.
2. Normally closed friction type brake, high braking torque, safe and reliable operating.
3. Small volume, compact structure and high transmission efficiency.
4. Axial fixed or variable hydraulic motor with long life operating.
5. Mounting frame is available on request.
6. Balance valve, shuttle valve, limit switch and other accessories are also available on request.
1st layer top layer
AF5700 5700 4500 60 16 107 25 160
AF7700 7700 6000 52 18 118 25 180
AF9600 9600 7500 43 20 118 25 180
AF12800 12800 9800 43 24 118 27 220
AF15000 15000 12800 39 24 110 25 220
AF18500 18500 14600 85.3 28 162 27 380
AF25000 25000 19500 48.1 30 162 27 380
AF30000 30000 23000 32 32 169 30 380
AF45000 45000 34700 32 42 169 30 380
Pull Force (KN)
Rope Speed
(m/min)
Diameter
of rope
(mm)
Capacity
of rope
(m)
Working
pressures diff.
(Mpa)
Flow Rate
(L/min)
Model
20
For above specifications, it is just for reference. For more, please contact us.
Meanwhile, we can customise the products based on your requirements.
MODEL D2 D3 L L1 L2 L3 L4 L5 L6 H H1 H2
HCW30 90 165 13 8-M12×30 431 199 257 57 485 316 196 225 80 8
HCW40 110 200 14 8-M14×30 508 276 330 60 510 338 218 270 96 0
HCW50 110 220 14 8-M14×30 542 282 338 70 580 368 238 295 100 0
HCW80 143 270 19 8-M16-7H 622 275 390 64 532 — 286 362 119 0
Wire rope max. pull force
bottom layer (KN)
Wire rope working speed
bottom layer (m/min)
Hydraulic motor OMP80 OMP80 OMS125 OMT250
System working pressure (Mpa) 15 16 17 16
Hydraulic motor system capacity
(L/Min)
45 53 55 95
Transmission ratio (i) 48 52 43 35
Wire rope diameter (mm)
Number of layer of rope (layer) 4 3 3 3
Cope capacity (m) 23 25 30 30
Weight (kg) 35 40 54 115
HCW80
Type
Item
HCW30 HCW40 HCW50
30 40 50 80
5.5 5 5 5
For above specification, it is just for reference. For more specification, please contact us.
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
11. 21 22
coupling lever Oil Inlet
Drum
Drain Port
Set Screws Holder
Brake
Hydraulic Motor
For above specifications, it is just for reference. For more, please contact us.
Meanwhile, we can customise the products based on your requirements.
Wire rope max. pull force
bottom layer (KN)
Wire rope working speed
bottom layer (m/min)
Hydraulic Motor OMS80 OMS160 OMS250 OMS315 OMT315 OMT315 OMT500
Response pressure of
arrester (Mpa)
< 2.5 < 2.5 < 2.5 < 2.5 < 2.5 < 2.5 < 2.5
System working pressure
(Mpa)
15 17 17 17 18 19 17
Hydraulic motor system
capacity (L/Min)
55 55 54 78 88 94 120
Transmission ratio (i) 36 36 36 36 53.28 53.28 53.28
Wire rope diameter (mm)
Number of layer of rope
(layer)
4 4 4 4 4 4 4
Cope capacity (m) 45 59 56 49 60 60.1 120
Weight (kg) 129 262 285 295 560 570 800
7.5 35
Type
Item
HCP065 HCP400
65 395
HCP250
56 6 6
HCP300
98 147 196 245 294
HCP100 HCP150 HCP200
L 580 1015 1125 1135 1210 1225 1545
L1 105 240 255 255 282 282 235.5
L2 397 525 532 532 610 610 755
L3 72 90 90 100 120 130 30
L4 230 340 334 334 360 360 480
D1
D2
D3
D4
HCP065 HCP400
Type
Item
HCP100 HCP150 HCP200 HCP250 HCP300
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
12. dual - speed final drive and travel 0-7km/h at grades up to 60%.
DUAL-SPEED FINAL DRIVE
to our goal of exceeding your expectations and
and rubber track undercarriage to provide better service for our customers.
COMPETITIVE PRICE WITH BEST SERVICE
design the track undercarriages toKINGBONNY has many professional engineers devoting to
CUSTOMISE SOLUTION
For application on drilling rigs,excavators,crushers,cranes,aerial platform,etc. with high efficiency
design flexibility,rapid response and solutions that are always highly effective.
APPLICATION
KINGBONNY sets up a subsidiary company specialized in manufacturing steel track undercarriage
Special design catered to customer specifications.With years of experience we can offer the track
and adaption of vile working condition.
requirements.meet different customers
we make custom track
and our track undercarriage can carry up to 50 ton, supporting
With our years of experience, we can take your concept
from prototype to production. We are committed
requirements for quality, reliability, and on-time delivery.
We can provide our track undercarriage with most competitive price,great quality and best service.
If you have any question or need any help,please feel free to contact with us.Our service team is
ready to provide best service for you.
IDLER CARRIER ROLLER TRACK ROLLER SPROCKET
TENSIONER TRACK GROUP
TRACK SHOE
TRACK CHAINS
BOLT
systems for your mobility needs,
23
MODEL A B C D E F
No. of
roller
Dinamic
capacity
Static
capacity
Weight
kg.
Reduct.
Ratio
Hydr.
engine
Cc
Press.
Bar
oil flow
L/min
Torque
Nm to
engine
Grad.
ST-3500 2030 1500 485 1800 300 225 4+4 3500 4000 750 53.7 23.5/14.7 220 35 4723 60%
ST-6000 2467 1950 549 1700 300-400 240 5+5 6000 7000 1350 53.7 43.7/22.7 220 55 8330 60%
ST-8000 2783 2265 548 1800 400-450 255 8+8 8000 9500 1830 53.7 46.6/27.6 300 82 11700 60%
ST-10000 3800 3200 600 1700 400-500 280 9+9 10000 11300 2350 53.7 55.8/32.6 350 100 14800 60%
ST-12000 3282 2575 720 2000 400-600 345 9+9 12000 15000 2950 54 76.6/44.8 350 124 22500 60%
ST-15000 3666 2923 753 2000 500-800 360 8+8 15000 18000 3300 53.7 79.5/46.7 350 140 24000 60%
ST-20000 4065 3323 786 500-800 375 8+8 20000 25000 4850 48 146.5/95 350 220 38000 60%
ST-30000 4530 3730 836 500-800 405 9+9 30000 37000 5850 66.4 173/101 330 260 59000 60%
ST-40000 4888 4090 880 500-800 420 10+10 40000 480000 7300 70.1 185/114 350 290 72800 60%
MODEL A B C D E F
N°of
roller
Dinamic
capacity
Static
capacity
Weight
kg.
Reduct.
Ratio
Hydr.
engine
Cc
Press.
Bar
oil flow
L/min
Torque
Nm to
engine
Grad.
RT-1500 1420 1066 350 980 230 165 3+3 1200 1500 330 31 16.1 270 17 2000 60%
RT-2500 1850 1370 480 1220 250 245 4+4 2500 3000 380 53.7 23.5/14.7 220 35 4723 60%
RT-3500 1980 1511 500 1520 300 250 5+5 3500 4000 650 53.7 23.5/14.7 220 35 4723 60%
RT-5000 2500 1950 550 1800 350 265 6+6 5000 6000 900 53.7 43.7/22.7 220 55 8330 60%
RT-6000 2905 2355 550 1800 400 265 7+7 6000 7000 1280 53.7 43.7/22.7 220 55 8330 60%
RT-8000 2950 2450 600 1800 400 310 7+7 8000 9500 1550 53.7 46.6/27.5 300 82 11700 60%
STEEL TRACK UNDERCARRIAGE
RUBBER TRACK UNDERCARRIAGE
24
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com
NINGBO KINGBONNY MACHINERY IMP&EXP CO.,LTD
kemercn@hotmail.com