Multicarrier modulation can be implemented by using Orthogonal Frequency Division Multiplexing (OFDM) to achieve utmost bandwidth exploitation and soaring alleviation attributes profile besides multipath fading. To support delay sensitive and band bandwidth demanding multimedia applications and internet services, MIMO in addition with other techniques can be used to achieve high capacity and reliability. To obtain high spatial rate by transmitting data on several antennas by using MIMO with OFDM results in reducing error recovery features and the equalization complexities arise by sending data on varying frequency levels. Three parameters frequency OFDM, Spatial (MIMO) and time (STC) can be used to achieve diversity in MIMO-OFDM. This technique is dynamic and well-known for services of wireless broadband access. MIMO if used with OFDM is highly beneficial for each scheme and provides high throughput. There are several space time block codes to exploit MIMO OFDM; one of the techniques is called Alamouti Codes. The paper investigates adaptive Alamouti Codes and their application in IEEE 802.11n.
1 of 9
Download to read offline
More Related Content
Efficient stbc for the data rate of mimo ofdma
1. Sci.Int.(Lahore),28(1),247-255,2016 ISSN 1013-5316; CODEN: SINTE 8 247
Jan.-Feb.
EFFICIENT STBC FOR THE DATA RATE OF MIMO-OFDMA
Waseem Abbas1
, Nasim Abbas2
, Uzma Majeed3
and Sadaf Khan4
1
Computer Science Department COMSATS Abbottabad, Pakistan.
2
Electronic Engineering Department MAJU Islamabad, Pakistan.
3
Computer Engineering Department UET Taxila, Pakistan
4
Software Engineering Department IUSE Universiy, Rawalpindi, Pakistan.
1
waseem_abbas@live.com, 2
nasim_abbas67@yahoo.com, 3
uzmamajeed14@gmail.com, 4
sadafgondal@yahoo.com
ABSTRACT: Multicarrier modulation can be implemented by using Orthogonal Frequency Division Multiplexing
(OFDM) to achieve utmost bandwidth exploitation and soaring alleviation attributes profile besides multipath fading. To
support delay sensitive and band bandwidth demanding multimedia applications and internet services, MIMO in addition
with other techniques can be used to achieve high capacity and reliability. To obtain high spatial rate by transmitting
data on several antennas by using MIMO with OFDM results in reducing error recovery features and the equalization
complexities arise by sending data on varying frequency levels. Three parameters frequency OFDM, Spatial (MIMO) and
time (STC) can be used to achieve diversity in MIMO-OFDM. This technique is dynamic and well-known for services of
wireless broadband access. MIMO if used with OFDM is highly beneficial for each scheme and provides high
throughput. There are several space time block codes to exploit MIMO OFDM; one of the techniques is called Alamouti
Codes. The paper investigates adaptive Alamouti Codes and their application in IEEE 802.11n.
Keywords: MIMO-OFDM, STBC, SNR, Line of Sight, QoS, Frequency Division Multiplexing, Fourier transform, discrete
Fourier transform, inter-leaving, carrier
I. INTRODUCTION
The demand of the next generation communication
networks is to support a wide range of services which
includes high quality voice, data, still pictures, streaming
videos, and services which require several megabits per
second of data rate. When data is transmitted at high data
rates over radio channel CIR (channel impulse response)
can expand to several symbol periods because of multipath
signals and resulting ISI (Inter symbol interference).
Different objects reflect signals traveling through several
paths and signals taking less direct path arrive at receiver
later and are often attenuated. A common strategy to deal
with multipath signals is to ignore weaker signals by the
energy which they contain is wasted. Traditional systems
employ some improvement techniques to deal with
multipath signals; one technique is to use various antennas
to capture the strongest signal at each moment of time,
whereas there is another technique that adds delays to back
align the signals. Whatever technique is used, it’s very
much clear that multipath signals are harmful and
wasteful. MIMO (Multiple Input Multiple Output) seize
the benefits of multipath propagation signals as compared
to the other conventional systems. MIMO set multipath
signals to work instead of implementing various
techniques to manage multipath signals. It is likely to be
done by sending over one data signal at the same time in
the same frequency band by exploiting multiple
transmitting and multiple receiving antennas. OFDM
(Orthogonal frequency division multiplexing) is also
shining candidate to handle the effect of ISI and ICI (Inter
carrier interference). OFDM converts frequency selective
wide band signal into frequency flat multiple orthogonally
spaced narrow band signals also resulting in high
bandwidth efficiency. There are three most essential
parameters that completely define the quality and
effectiveness of any wireless communication system
Speed, Range and Reliability. In traditional system speed
can only be improved at a cost of range and reliability,
Range could be increased at cost of speed and reliability
and Reliability could be increased at the expense of range
and speed. MIMO-OFDM systems have altered the trends
by clearly representing that it can boost up all the three
basic parameters simultaneously. The detailed overview
and analysis of OFDM, MIMO and their combination with
space time coding is discussed. Simulation results
provided shows that Alamouti scheme can be best
exploited with MIMO. Alamouti scheme with MIMO
produce highe order of diversity and considerable
improvement in BER as number of antennas increased.
Simulation results are almost identical to theoretical
results which give an approach to design MIMO systems
with Alamouti Scheme of coding. It was simulated in
MATLAB. Space Time coding with MIMO is deployed to
attain transmit diversity and allows secure means of
propagation of data in a scenario where mobility is needed.
If there is perfect channel state information (knowledge of
response of the channel) it can achieve maximum gain in
capacity and high SNR at the receiver. From the
simulation result perform on different order of MIMO
systems.
II. LITERATURE REVIEW
2.1 A Road to Future Broadband Wireless Access: MIMO-
OFDM-Based Air Interface --- Hongwei Yang and Alcatel
Shanghai Bell
OFDM is an eminent technique to achieve high data rates.
An epigrammatic methodological overview of MIMO-
OFDM is examined in this paper, including several
research topics spatial channel modeling, space-time
techniques, Air interface, channel estimation and
transceiver design of MIMO-OFDM [2]. There are many
advantages of exploiting OFDM systems in future
broadband wireless access which are listed below
a. Less complications at receiver end
b. inflated spectral efficiency
c. Suitability for high-data-rate transmission over a
multipath fading channel.
2. 248 ISSN 1013-5316; CODEN: SINTE 8 Sci.Int.(Lahore),28(1),247-255,2016
Jan.-Feb.
d. Easy implementations by Fast Fourier transform (FFT)
[2].
The major drawback of OFDM systems is exaggerated
peak-to-average power ratio (PAPR) in contrast with
single-carrier modulation [2].
2.2 Use of Space Time Block Codes and Spatial Multiplexing
using TDLS Channel Estimation to Enhance the Throughput
of OFDM based WLANs ------ Angela Doufexi, Arantxa
Prado Miguelez, Simon Armour, Andrew Nix and Mark
Beach
In this paper a technique “Hadamard Design” [8] is used
to enhance the performance and efficiency of COFDM
WLANs by exploiting space-time block coding and spatial
multiplexing MIMO techniques.
The proposed system characteristics/features are:
a. Need for high data rates.
b. Interference avoidance from other users.
c. By using multiple antennas as compared to single
antenna performance will improve.
d. Improved spectral efficiency.
Alamouti proposed a simple transmit diversity scheme
which was generalized by Tarokh to form the class of
Space-Time Block Codes (STBC) [8]. Space time block
codes can be represented as:
X= [
𝑆1 −𝑆2
∗
𝑆2 𝑆1
∗ ] (1)
2.3 MIMO Space-Time Block Coding (STBC): Simulations
and Results ---Luis Miguel Cort´es-Pe˜na
Wireless networks, including Wireless LANs and mobile
phone networks have been emerging very vastly and now
becomes the part of our everyday life. Despite the fact that
wireless devices are the data rate and range limited and
becoming the greatest challenge day by day, the
researchers have splurged efforts to triumph over these
limitations. Beam foaming is a signal processing technique
to maximize the signal received at the receiver end, which
contains the transmission of the same signals with varying
gain and phase called weights [3].
Diversity is the phenomenon in which a signal with single
space time coded stream is transmitted through all
antennas.
To increase network capacity a high signal is divided into
several lower streams by using spatial multiplexing and
sending them through multiple antennas. By using this
technique every stream can be effectively decoded at
receiver provided that the receiver has sufficient antennas
to split the streams and signals received have enough
spatial signatures. The range can be extended and high
data rates will be achieved by using these techniques
without entailing transmits power or extra bandwidth.
Diversity coding for MIMO systems is examined in detail
as well as Space-time block coding techniques comprising
of Alamouti’s STBC for dual antenna and also for
orthogonal STBC for 3 and 4 transmit antennas are
investigated. Results of performance are evaluated and
examined by implementing these techniques in MATLAB
according to their bit rates using different modulation
techniques.
2.4 System Model
There are three main components of a MIMO system,
Transmitter, Receiver and the Channel. Nt represents the
multiple antennas at the transmitter side and Nr symbolize
the multiple antennas at the receiver side. Block diagram
of MIMO system is depicted in Figure 3.3. The MIMO
system is illustrated with regard to the channel, as depicted
in the figure multiple inputs to the channel are situated at
the output of the Transmitter and the outputs of channel
are situated at the input of Receiver [11].
Fig. 1. MIMO system block diagram.
2.5 MIMO Advantages: There are numerous benefits of
using MIMO in wireless broadband services some of its
advantages are listed below.
a. Spatial multiplexing: Multiple streams of signals can be
sent in parallel, every stream uses a different transmit
antenna element. Appropriate signal processing can be
carried out at the receiver end to split the signals [11].
b. Spatial diversity: Transmit antennas can code a signal
thus creating redundancy this reduces the outage
probability [11].
c. Beam forming: The receiving power of the receiver and
the SNR can be increased by getting more streams, this is
done by making a transmitter receiver pair that can achieve
beam forming and send their beams at each other [11].
2.6 Space Time Block Coding:Spatial Diversity is the
methodology used to combat channel fading by exploiting the
redundant diversity of MIMO systems and transmitting a
number of copy of similar data through every antenna. As a
result of using spatial diversity the possibility of losing
information reduces exponentially. Transmission over SISO
systems is also supported by antennas in MIMO systems as
the required rate of is that of a SISO system. [11]
III. METHODOLOGY
The main flow of the system designed will work as given in the
following fig. 2:
3. Sci.Int.(Lahore),28(1),247-255,2016 ISSN 1013-5316; CODEN: SINTE 8 249
Jan.-Feb.
Space Time Block
Codes(STBC)
Rayleigh Channel
Channel
Diversity Selection
Profile Selection
STBC Decoder
Receiver(RX)
Transmitter(TX)
Rician Channel
Fig. 2. Block Diagram of MIMO-OFDM System
3.1 2×1 Alamouti Scheme
Symbols represented as S1 and S2 is sent by antenna1 and
antenna 2 at time T1 and at time T2 .Symbol S2*(complex
conjugate of symbol 2) and S1* (negative complex
conjugate of symbol 1) is sent by antenna 1 and 2
respectively to fulfill orthogonality, Where h1 and h2 are
channel parameter (h1 and h2 are the channel path response
to signal from antenna 1 and antenna 2 respectively).
Whereas r1 and r2 is receiving vector at one receiver for time
T1 transaction and for time T2 transaction, at receiver
received information is [11].
r = Sh + n (2)
Whereas “n” shows noise (could be white Gaussian Noise,
Rayleigh fading, flat fading channel etc)
Fig. 3. 2×1 Alamouti Scheme
From figure it is cleared that channel matrix is” h” is
repressed as h= [h1, h2] T,
(in figure h1=h0, h2=h1, and
S1=s0, S2=s1)
Receive matrix can be written as
r =Sh+v (3)
(
𝑟1
𝑟2
) = (
𝑆1 𝑆2
𝑆2
∗
−𝑆1
∗) * (
ℎ1
ℎ2
) + (
𝑣1
𝑣2
) (4)
In equation form it is written as :
r1 = h1 s1+ h2s2+ v1 (5)
r2 = -h2 s1
*
+ h1s2
*
+ v2 (6)
After taking complex, conjugate of equation (6)
r1 = h1 s1+ h2s2+ v1 (7)
r2
*
= -h2
*
s1 + h1
*
s2+ v2 (8)
In Matrix form it can be written as :
(
𝑟1
𝑟2
∗) = (
ℎ1 ℎ2
−ℎ2
∗
ℎ1
∗) * (
𝑠1
𝑠2
) + (
𝑣1
𝑣2
∗) (9)
Now channel matrix with symbols takes new mathematical
shape i.e. Y = Hs+v
Where the rearrange channel matrix H is orthogonal,
mathematically it can verified as
HH
H=H HH
= h2
I2
I is identity matrix of order 2× 2 and gain is h2= │h1│2 +
│h2│2, (all this manipulation is provided using symbol
tool box in this report). [5], [7]
3.2 Rayleigh Channel
In wireless channel, mostly behaviour of channel is
unpredictable because of time varying properties of
channel. Signal propagate through medium from different
path suffer different level of attenuation and impairment.
At receiver signal is received with superposition of multi
signals coming from multipath is termed s multipath
fading. If there is no line of sight path between the sender
and receiver, Attenuation coefficient to each path
(multipath) is considered to be IID (independent identical
distribution) and central limit theorem applies. Resulting
path become complex Gaussian random variable, Channel
is said to be Rayleigh .In Rayleigh fading LOS path does
not exist .While signal travelling through a wireless link,
its power alters due to channel response. [4, 10]
3.3 Rician Channel
In Rician fading line of sight (LOS) exist i.e. one of the
path to receiver is much stronger than other one. A signal
or symbol of delay version have change in phase or differ
in phase with line of sight signal phase. Crust and trough
of both these signals cause resultant signal to be high
average power or attenuated. So in result we may get
distorted signal at receiver end. Rician fading occurs
when one of the paths, typically a line of sight signal, is
much stronger than the others. [6]
Fig. 4 depicts the behavior of the Transmitter and Fig.5
depicts the behavior of the Receiver.
4. 250 ISSN 1013-5316; CODEN: SINTE 8 Sci.Int.(Lahore),28(1),247-255,2016
Jan.-Feb.
Preamble
Signal Field
Data Field Modulator
Interleaver
Puncturer
Convolution
Encoder
Scrambler
Raw Data
Short
Sequence
Long
Sequence
Guard Interval
(GI)
IFFT
Modulation
Interleaver
Convolution
Encoder
Data Rate
Length of
Data
Final
Transmission
Preamble
Fig. 4. Transmitter (Tx)
Receiver (Rx)
Preamble Extraction
AGC
Course Frequency
Acquisition
Signal Field
Length of Data Data Rate
Data Packet
Service Field
Decoding
Demodulator
De-interleaver
De-puncture
Veterbi Decoder De-scrambler Raw Data
Fig. 5. Receiver (Rx)
3.4 IFFT/FFT
The Fourier transformation is generally needed to transform
a Signal from the special dimension into the frequency
dimension. Using the inverse Fourier transformation the
converted signal can be restored from frequency dimension..
3.5 Viterbi decoder
The Viterbi algorithm offers an efficient way of finding
Viterbi path which is basically a string of veiled states. This
algorithm can be used as an error correction scheme for noisy
channels. It can also be used to mark out the widespread
function in decoding the convolution codes exploited in GSM
as well as CDMA, satellite communications, dial up modems,
and deep space communications. Furthermore this algorithm
is employed in speech recognition, bioinformatics and
keyword spotting. In case of Speech to text conversion the
acoustic signal is considered to be the observed sequence of
events on the other side a text string is treated as hidden
cause.
Fig. 6. Trellis diagram
IV. IMPLEMENTATION
The implementation phase composed of two basic elements
which are: Transmitter (Tx), Receiver (Rx).
4.1 Design and Simulations using MATLAB
MATLAB is strong mathematical tool provide help to
engineers to solve, model, simulate the problems ,and find
solutions assuming environment in to mathematical
equations. It is standard engineering tool as perform many
different tasks using different tool box relevant to different
particular cases e.g. Control systems, signal processing,
image processing, communication systems, and support
complex matrix manipulation, simulink etc .In field and
research and universities it provide platform for learning and
comparison of theatrical hypothesis and simulated values. It
even provide support to nonlinear system calculations and
result.
4.2 Simulation and Procedure
In this report MATLAB R2011b [13] is used to simulate and
models the problems for analysis and results. Different
features of symbolic toolbox is use in simulation for
Alamouti scheme of coding which are not supported by older
version of MATLAB in order to simulate the provided code
MATLAB R2011b is
Appropriate software package to get results.
5. Sci.Int.(Lahore),28(1),247-255,2016 ISSN 1013-5316; CODEN: SINTE 8 251
Jan.-Feb.
4.3 Software Simulations and Results
This section includes the analysis on OFDM transceiver
along with channel estimation effects. Following simulations
show the results of application of STBC followed by the
graphical interface as well as simulations have been done on
MATLAB R2011b.
4.4 Implementation and Testing
Finally, simulation performed on MIMO using Alamouti
scheme by considering a different antenna arrangement.
MIMO system is tested by both types of Space time block
codes which are Alamouti Scheme and Orthogonal space
time block codes with coding rates of ½ and ¾. Values are
assumed in order get BER.
EbNo ratio Eb/No range is define it is taken from 0 to 40 if
taken larger ,it takes more time to produce results
Random data is generated for 40 times (length of Eb/N0) ,it is
considered as x-axis for BER graph .on y-axis BER is taken
from a range of 10-5
to 0.9.
Number of receivers are taken 1, 2, 3,4 and 6 with variation
in the transmitter, different BER graphs are defined for each
case respectively.
It can be seen in the figures presented in Annexure-A that
simulated result is identical to theoretical and expected result.
A series of tests were conducted and the results are shared in
Annexure-A. Simulation results conclude that it's quite
evident from the results that as number of antennas are
increasing on receiver side BER is largely improve, for
increment in the number of antennas at transmitter also play
role in improvement of BER which can be easily viewed by
compared 1×1 system with 2× 1 etc.
Further Almouti 2x1, 2x2 and 2x3 system has been
implemented and results compared in Fig 7. Simulation result
it is concluded that: BER performance of 2×3 system is better
than BER performance of 2×2 system which is better than
BER performance of 1×2.
Fig. 7. Comparison result for simulations
V. CONCLUSION
Space time coding (STC) was implemented on MIMO
system and its Bit Error Rate was checked. For the simulation
purpose MATLAB was used. MIMO system uses OFDM.
OFDM modulator was designed and simulated. The data is
encoded using space time block codes to keep multiple data
symbols orthogonal. Space–Time Block Codes (STBCs) are
the simplest types of spatial temporal codes that exploit the
diversity offered in systems with several transmit antennas.
The combined use of MIMO architecture, OFDM
modulation, and STBC coding, creates a highly flexible
communication system. The designed system is tested by
using various Space time block codes such as first with
Alamouti codes and then with the Orthogonal space time
block codes with coding rates of ½ and ¾.
New solutions must be developed in order to cope with the
scarcity of spectrum.
MIMO-OFDM system is a solution and a future technology
that can exploit the available spectrum with greater efficiency
to support high data rates, reduces the carrier cost, carries a
smaller carrier cost through to end user and supports many
users within individual cells enhancing the user experience.
The concept of MIMO system is its motivation to achieve
higher throughputs within a given bandwidth. MIMO-OFDM
is communication system using multiple antennas (transmit &
receive) with OFDM modulation at each antenna, is a
promising candidate for 4G systems. [1]
Future work can be done on this system, by combining
OFDM and STBC for MIMO, OFDM demodulator and
channel effects with different noise models can be simulated.
There could be many experiments performed considering this
approach in a different environment indoors and outdoor, to
make system adaptive and develop feedback approach. There
are various approaches in coding structures, but the approach
used in this project is Space-time block codes (STBC), and
anyone can use other coding techniques in order to
investigate the MIMO-OFDM systems such as space-time
trellis codes (STTC), space-time turbo trellis codes and
layered space-time (LST) codes etc.
REFERENCES
[1] Paulraj, Arogyaswami, Rohit Nabar, and Dhananjay
Gore. Introduction to space-time wireless
communications. Cambridge university press,
2003.
[2] Yang, Hongwei. “A road to future broadband wireless
access: MIMO-OFDM-based air interface”
Communications Magazine, IEEE 43, no. 1 (2005):
53-60.
[3] Alamouti, Siavash M. "A simple transmit diversity
technique for wireless communications." Selected
Areas in Communications, IEEE Journal on 16,
no. 8 (1998): 1451-1458.
[4] Gregorio, Fernando H. "Space time coding for MIMO
systems." Helsinki University of Technology,
Signal Processing Laboratory, POB 3000 (2004).
[5] Van Zelst, Allert, and Tim CW Schenk.
"Implementation of a MIMO OFDM-based
wireless LAN system." Signal Processing, IEEE
Transactions on 52, no. 2 (2004): 483-494.
6. 252 ISSN 1013-5316; CODEN: SINTE 8 Sci.Int.(Lahore),28(1),247-255,2016
Jan.-Feb.
[6] de la Kethulle, Sébastien. "An overview of
MIMO systems wireless communications."
Communication Theory for Wireless Channels
(2004).
[7] Tarokh, Vahid, and Hamid Jafarkhani. "Space-time
block coding for wireless communications:
performance results." Selected Areas in
Communications, IEEE Journal on 17, no. 3
(1999): 451-460.
[8] Doufexi, Angela, Arantxa Prado Miguelez, Simon
Armour, Andrew Nix, and Mark Beach. "Use of
space time block codes and spatial multiplexing
using TDLS channel estimation to enhance the
throughput of OFDM based WLANs." In
Vehicular Technology Conference, 2003. VTC
2003-Spring. The 57th IEEE Semiannual, vol. 1,
pp. 704-708. IEEE, 2003.
[9] J. ZE, "MIMO_OFDM system for WiMAX ", School of
Engineering ,Design and Technology ,University Of
Bradford 5th work shop proceedings 17 may 2006.
[10] IEEE Computer Society LAN MAN Standards
Committee. "Supplement to IEEE Standard for
Information technology-Telecommunications and
information exchange between systems-Local
and metropolitan area networks-Specific
requirements-Part 11: Wireless LAN Medium
Access Control (MAC) and Physical Layer
(PHY) specifications: Higher-speed Physical
Layer Extension in the 2.4 GHz Band." IEEE Std
802.
[11] Cortés-Peña, L. M. "MIMO Space-Time Block Coding
(STBC): Simulations and Results [Design Project:
Personal and Mobile Communications, Georgia
Tech (ECE6604)]." Recuperado de http://users. ece.
gatech. edu/cortes/STBC_Matlab. html (2009).
[12]MATLAB_GUIDE_www.bunmatek.boun.edu.tr.pdf
[13] Hoadley, John. "Building future networks with
MIMO and OFDM." Telephonyonline. com (2005).
7. Sci.Int.(Lahore),28(1),247-255,2016 ISSN 1013-5316; CODEN: SINTE 8 253
Jan.-Feb.
ANNEXURE-A
1. When nRx=1
1.1 Alamouti STBC with 2x1 Diversity
When Alamouti STBC with 2x1 Diversity is
tested it is seen that the BER and Eb/no with
BPSK is high from all the other modulation
schemes.
Fig. 8. Alamouti STBC with 2x1 Diversity
1.2 Orthogonal STBC with 3x1 Diversity
Orthogonal STBC with 3x1 Diversity is tested with ½
coding rate. The BER value is 0.25. This means that
Data rate in this combination is high as compared to
Orthogonal STBC with 3x1 Diversity because large
BER is appalling.
Fig. 9. Orthogonal STBC with 3x1 Diversity
1.3 Orthogonal STBC with 3x1 Diversity
Orthogonal STBC with 3x1 Diversity is tested with ¾
coding rate. The BER value is 0.31.This means that
Data rate in this combination is low as compared to
Orthogonal STBC with 3x1 Diversity with coding rate
½ because large BER is not good.
Fig. 10. Orthogonal STBC with 3x1 Diversity
1.4 Orthogonal STBC with 4x1 Diversity
Orthogonal STBC with 4x1 Diversity is tested with
½ coding rate.
Fig. 11. Orthogonal STBC with 4x1 Diversity
1.5 Orthogonal STBC with 4x1 Diversity
Orthogonal STBC with 4x1 Diversity is tested with ¾
coding rate
8. 254 ISSN 1013-5316; CODEN: SINTE 8 Sci.Int.(Lahore),28(1),247-255,2016
Jan.-Feb.
Fig. 12. Orthogonal STBC Data rate variance with 3x4
Diversity
2. When nRx=2
2.1 Orthogonal STBC with 4x2 Diversity
Orthogonal STBC with 4x2 Diversity is tested with ½
coding rate.
Fig. 13. Orthogonal STBC with 4x2 Diversity
2.2 Orthogonal STBC with 4x2 Diversity
Orthogonal STBC with 4x2 Diversity is tested with ¾
coding rate.
Fig. 14. Orthogonal STBC with 4x2 Diversity
2.3 Orthogonal STBC with 3x2 Diversity
Orthogonal STBC with 3x2 Diversity is tested with ½
coding rate.
Fig. 15. Orthogonal STBC with 3x2 Diversity
9. Sci.Int.(Lahore),28(1),247-255,2016 ISSN 1013-5316; CODEN: SINTE 8 255
Jan.-Feb.
2.4 Orthogonal STBC with 3x2 Diversity
Orthogonal STBC with 3x2 Diversity is tested with ¾
coding rate.
Fig. 16. Orthogonal STBC with 3x2 Diversity
3. WHEN nRX=3
3.1 Orthogonal STBC with 4x3 Diversity
Orthogonal STBC with 4x1 Diversity is tested with ½
coding rate.
Fig. 17. Orthogonal STBC with 4x3 Diversity
3.2 Orthogonal STBC with 4x3 Diversity
Orthogonal STBC with 4x1 Diversity is tested with ¾
coding rate.
Fig.18. Orthogonal STBC with 4x3 Diversity
When Alamouti STBC with 2x4 Diversity is tested it is
seen that the BER and Eb/no with BPSK is high from all
the other modulation schemes.