The document discusses various types of engineering curves including conics, cycloids, involutes, spirals, and helices. It provides definitions and construction methods for different conic sections obtained from intersecting a right circular cone with cutting planes in different positions relative to the axis. Specifically, it describes how triangles, circles, ellipses, parabolas, and hyperbolas can be obtained and provides step-by-step methods for constructing ellipses using concentric circles, rectangles, oblongs, arcs of circles, and rhombuses. It also demonstrates how to construct parabolas and use directrix-focus definitions to draw ellipses, parabolas, and other curves.
2. CLASSIFICATION OF ENGG. CURVES
1. CONICS
2. CYCLOIDAL CURVES
3. INVOLUTE
4. SPIRAL
5. HELIX
6. SINE & COSINE
3. What is Cone ?
It is a surface generated by moving a Straight
line keeping one of its end fixed & other end
makes a closed curve.
The fixed point is known as vertex or apex.
The closed curve is known
as base.
If the base/closed curve is a
circle, we get a cone.
If the base/closed curve
is a polygon, we get a
pyramid.
Vertex/Apex
90
º
Base
4. The line joins apex to the center of base is called axis.
If axes is perpendicular to base, it is called as right
circular cone.
If axis of cone is not
perpendicular to base, it is
called as oblique cone.
The line joins vertex/ apex to
the circumference of a
cone is known as
generator.
Cone Axis
Generator
90º
Base
Vertex/Apex
5. CONICS
Definition :- The section obtained by the
intersection of a right circular cone by a
cutting plane in different position relative to
the axis of the cone are called CONICS.
6. A - TRIANGLE
B - CIRCLE
CONICS
C - ELLIPSE
D – PARABOLA
E - HYPERBOLA
7. TRIANGLE
When the cutting plane contains the apex,
we get a triangle as the section.
8. CIRCLE
When the cutting plane is perpendicular to the
axis or parallel to the base in a right cone we get
circle the section.
Section Plane
Circle
9. ELLIPSE
Definition :-
When the cutting plane is inclined to the axis but
not parallel to generator or the inclination of the
cutting plane(α) is greater than the semi cone
angle(θ), we get an ellipse as the section.
θ
α
α > θ
10. PARABOLA
When the cutting plane is inclined to the axis and
parallel to one of the generators of the cone or
the inclination of the plane(α) is equal to semi
cone angle(θ), we get a parabola as the section.
θ
α
α = θ
11. HYPERBOLA
Definition :-
When the cutting plane is parallel to the axis or
the inclination of the plane with cone axis(α)
is less than semi cone angle(θ), we get a
hyperbola as the section.
α < θ
α = 0
θ
θ
12. CONICS
Definition :- The locus of point moves in a plane
such a way that the ratio of its distance from
fixed point (focus) to a fixed Straight line
(Directrix) is always constant.
M
P
C F
V
Conic Curve
Focus
Directrix
Fixed straight line is called as directrix.
Fixed point is called as focus.
13. The line passing through focus & perpendicular
to directrix is called as axis.
The intersection of conic curve with axis is called
as vertex.
Conic Curve
M Axis
C
F
V
P
Focus
Directrix
Vertex
14. N Q
Conic Curve
Distance of a point from focus
Distance of a point from directrix
= Eccentricity
= PF/PM = QF/QN = VF/VC = e
Ratio =
M P
F
Axis
C
V
Focus
Directrix
Vertex
15. Take major axis 100 mm and minor axis 70 mm long.
1
2
3
4
5
C
A B
6
7
8
9
10
D
1
2
3
4
5
6
7
8
9
10
Problem 1 :-
Draw ellipse by concentric circle method.
Steps:
1. Draw both axes as perpendicular bisectors
of each other & name their ends as shown.
2. Taking their intersecting point as a center,
draw two concentric circles considering both
as respective diameters.
3. Divide both circles in 12 equal parts &
name as shown.
4. From all points of outer circle draw vertical
lines downwards and upwards respectively.
5.From all points of inner circle draw
horizontal lines to intersect those vertical
lines.
6. Mark all intersecting points properly as
those are the points on ellipse.
7. Join all these points along with the ends of
both axes in smooth possible curve. It is
required ellipse.
ELLIPSE
BY CONCENTRIC CIRCLE METHOD
16. 4
3
2
1
4
3
2
1
Problem 2
Draw ellipse by Rectangle method.
Take major axis 100 mm and minor axis 70 mm long.
D
3 2 1 A B
C
Steps:
1 Draw a rectangle taking major
and minor axes as sides.
2. In this rectangle draw both
axes as perpendicular bisectors
of each other..
3. For construction, select upper
left part of rectangle. Divide
vertical small side and horizontal
long side into same number of
equal parts.( here divided in four
parts)
4. Name those as shown..
5. Now join all vertical points
1,2,3,4, to the upper end of minor
axis. And all horizontal points
i.e.1,2,3,4 to the lower end of
minor axis.
6. Then extend C-1 line upto D-1
and mark that point. Similarly
extend C-2, C-3, C-4 lines up to
D-2, D-3, & D-4 lines.
7. Mark all these points properly
and join all along with ends A
and D in smooth possible curve.
Do similar construction in right
side part.along with lower half of
the rectangle.Join all points in
smooth curve.
It is required ellipse.
ELLIPSE
BY RECTANGLE METHOD
1 2 3 4
17. C
D
1
2
4
3
1
1 2 3 4 3 2 1 A B
2
4
3
Problem 3:- Draw ellipse by Oblong method.
Draw a parallelogram of 100 mm and 70 mm long
sides with included angle of 750.Inscribe Ellipse in it.
STEPS ARE SIMILAR TO
THE PREVIOUS CASE
(RECTANGLE METHOD)
ONLY IN PLACE OF RECTANGLE,
HERE IS A PARALLELOGRAM.
ELLIPSE
BY OBLONG METHOD
18. C
A B
F1 1 2 3 4 F2
D
p1
p2
p3
p4
ELLIPSE
BY ARCS OF CIRCLE METHOD
O
PROBLEM 4.
MAJOR AXIS AB & MINOR AXIS CD ARE
100 AMD 70MM LONG RESPECTIVELY
.DRAW ELLIPSE BY ARCS OF CIRLES
METHOD.
STEPS:
1.Draw both axes as usual.Name the
ends & intersecting point
2.Taking AO distance I.e.half major
axis, from C, mark F1 & F2 On AB .
( focus 1 and 2.)
3.On line F1- O taking any distance,
mark points 1,2,3, & 4
4.Taking F1 center, with distance A-1
draw an arc above AB and taking F2
center, with B-1 distance cut this arc.
Name the point p1
5.Repeat this step with same centers but
taking now A-2 & B-2 distances for
drawing arcs. Name the point p2
6.Similarly get all other P points.
With same steps positions of P can be
located below AB.
7.Join all points by smooth curve to get
an ellipse/
As per the definition Ellipse is locus of point P moving in
a plane such that the SUM of it’s distances from two fixed
points (F1 & F2) remains constant and equals to the length
of major axis AB.(Note A .1+ B .1=A . 2 + B. 2 = AB)
8 7 6 5
19. ELLIPSE
PROBLEM 5.
DRAW RHOMBUS OF 100 MM & 70 MM LONG
DIAGONALS AND INSCRIBE AN ELLIPSE IN IT.
BY RHOMBUS METHOD
A B
1
4
2
3
D C
STEPS:
1. Draw rhombus of given
dimensions.
2. Mark mid points of all sides &
name Those A,B,C,& D
3. Join these points to the ends of
smaller diagonals.
4. Mark points 1,2,3,4 as four
centers.
5. Taking 1 as center and 1-A
radius draw an arc AB.
6. Take 2 as center draw an arc CD.
7. Similarly taking 3 & 4 as centers
and 3-D radius draw arcs DA & BC.
20. ELLIPSE
DIRECTRIX-FOCUS METHOD
PROBLEM 6:- POINT F IS 50 MM FROM A LINE AB.A POINT P IS MOVING IN A PLANE
SUCH THAT THE RATIO OF IT’S DISTANCES FROM F AND LINE AB REMAINS CONSTANT
AND EQUALS TO 2/3 DRAW LOCUS OF POINT P. { ECCENTRICITY = 2/3 }
A 11’
K
10’
C X
V F
R
V1 M
1’
2’
6’
9’
B
450
STEPS:
1. Draw a vertical line as AB as directix.
2. From any point C on AB, draw CX horizontal line.
3. Take F on CX such that CF = 50mm.
4. Divide CF in 5 equal parts (e = 2/3, so 2+3 = 5)
5. Take 2nd part from F as V (e = 2/3, so part is 2)
6. Draw a vertical line from V and draw arc with
center V and radius VF cutting line in K. Join CK
and extend line
7. Draw a line from F at 45 deg. With CX cutting CK in
R.
8. Draw vertical line from R cutting CX in V1.
9. Take M as mid-point of V V1
10.Divide VV1 in any no of parts and draw vertical
lines from all these parts which cut CK in 1’, 2’, 3’,
…
11.1 1’ as radius and F as center cut the line 11’ in
parts.
12.Repeat the same for 22’, 33’, etc..
3’
4’
5’
7’
8’
1 2 3 4 5 6 7 8 9 10 11
21. 6
5
4
3
2
1
1 2 3 4 5 6
RECTANGLE METHOD
6
5
4
3
2
1
PARABOLA
5 4 3 2 1
PROBLEM 7: A BALL THROWN IN AIR ATTAINS 100 M HIEGHT
AND COVERS HORIZONTAL DISTANCE 150 M ON GROUND.
Draw the path of the ball (projectile)-
STEPS:
1.Draw rectangle of above size and
divide it in two equal vertical parts
2.Consider left part for construction.
Divide height and length in equal
number of parts and name those
1,2,3,4,5& 6
3.Join vertical 1,2,3,4,5 & 6 to the
top center of rectangle
4.Similarly draw upward vertical
lines from horizontal1,2,3,4,5
And wherever these lines intersect
previously drawn inclined lines in
sequence Mark those points and
further join in smooth possible curve.
5.Repeat the construction on right side
rectangle also. Join all in sequence.
This locus is Parabola.
.
22. Problem no.8: Draw an isosceles triangle of 100 mm long base and
110 mm long altitude.Inscribe a parabola in it by method of tangents.
2
1
4
3
6
5
8
7
10
9
13
12
11
14
1
2
METHOD OF TANGENTS
3
4
5
6
PARABOLA
7
8
9
10
11
12
13
14
C
A B
Solution Steps:
1. Construct triangle as per the given
dimensions.
2. Divide it’s both sides in to same no.of
equal parts.
3. Name the parts in ascending and
descending manner, as shown.
4. Join 1-1, 2-2,3-3 and so on.
5. Draw the curve as shown i.e.tangent to
all these lines. The above all lines being
tangents to the curve, it is called method
of tangents.
23. PARABOLA
DIRECTRIX-FOCUS METHOD
PROBLEM 9: Point F is 50 mm from a vertical straight line AB.
Draw locus of point P, moving in a plane such that
it always remains equidistant from point F and line AB.
K
1’
C X
1 2 3 4 5
V F
2’
3’
4’
5’
A
B
STEPS:
1. Draw a vertical line as AB as directix.
2. From any point C on AB, draw CX horizontal line.
3. Take F on CX such that CF = 50 mm.
4. Take V as mid-point of CF.
5. Draw a vertical line from V and draw arc with center V
and radius VF cutting line in K. Join CK and extend line
6. Take any number of points 1, 2, 3,.. On CX
7. Draw vertical line from points 1, 2, 3.. Cutting CK in 1’,
2’, 3’, …
8. 1 1’ as radius and F as center cut the line 1 1’ in parts.
9. Repeat the same for 2 2’, 3 3’, etc..
10. Draw a curve through all points to get parabola.
24. Problem No.10: Point P is 40 mm and 30 mm from horizontal
and vertical axes respectively. Draw Hyperbola through it.
P
O
40 mm
2
2 1 1 2 3
30 mm
1
2
3
1
HYPERBOLA
THROUGH A POINT
OF KNOWN CO-ORDINATES
Solution Steps:
1. Extend horizontal line from P
to right side.
2. Extend vertical line from P
upward.
3. On horizontal line from P, mark
some points taking any distance
and name them after P-1, 2,3,4
etc.
4. Join 1-2-3-4 points to pole O.
Let them cut part [P-B] also at
1,2,3,4 points.
5. From horizontal 1,2,3,4 draw
vertical lines downwards and
6. From vertical 1,2,3,4 points
[from P-B] draw horizontal lines.
7. Line from 1 horizontal and line
from 1 vertical will meet at
P1.Similarly mark P2, P3, P4
points.
8. Repeat the procedure by
marking four points on upward
vertical line from P and joining all
those to pole O. Name this points
P6, P7, P8 etc. and join them by
smooth curve.
25. HYPERBOLA
DIRECTRIX
FOCUS METHOD
PROBLEM 12:- POINT F IS 50 MM FROM A LINE AB. A POINT P IS
MOVING IN A PLANE SUCH THAT THE RATIO OF IT’S DISTANCES FROM F
AND LINE AB REMAINS CONSTANT AND EQUALS TO 3/2. DRAW LOCUS OF
POINT P. { ECCENTRICITY = 3/2 }
K
1’
2’
3’
C X
1 2 3 4
V F
4’
A
B
STEPS:
1. Draw a vertical line as AB as directix.
2. From any point C on AB, draw CX horizontal
line.
3. Take F on CX such that CF = 50mm.
4. Divide CF in 5 equal parts (e = 3/2, so 2+3 =
5)
5. Take 3rd part from F as V (e = 3/2, so part is
3)
6. Draw a vertical line from V and draw arc
with center V and radius VF cutting line in K.
Join CK and extend line.
7. Take any number of points on VX 1, 2, 3, …
8. Draw vertical lines from all these points
which cut CK in 1’, 2’, 3’, …
9. 1 1’ as radius and F as center cut the line 1
1’ in parts.
10.Repeat the same for 2 2’, 3 3’, etc..
11.Joint all points to draw HYPERBOLA
26. TO DRAW TANGENT & NORMAL
TO THE CURVE FROM A GIVEN POINT ( Q )
1. JOIN POINT Q TO F1 & F2
2. BISECT ANGLE F1Q F2 THE ANGLE BISECTOR IS NORMAL
3. A PERPENDICULAR LINE DRAWN TO IT IS TANGENT TO THE CURVE.
C
A B
F1 1 2 3 4 F2
D
p1
p2
p3
p4
O
NORMAL
Q
TANGENT
ELLIPSE
TANGENT & NORMAL
Problem 13:
27. ELLIPSE
TANGENT & NORMAL
F ( focus)
DIRECTRIX
ELLIPSE
V
(vertex)
A
B
T
T
N
N
Q
900
Problem 14:
TO DRAW TANGENT & NORMAL
TO THE CURVE
FROM A GIVEN POINT ( Q )
1.JOIN POINT Q TO F.
2.CONSTRUCT 900 ANGLE WITH
THIS LINE AT POINT F
3.EXTEND THE LINE TO MEET DIRECTRIX
AT T
4. JOIN THIS POINT TO Q AND EXTEND. THIS IS
TANGENT TO ELLIPSE FROM Q
5.TO THIS TANGENT DRAW PERPENDICULAR
LINE FROM Q. IT IS NORMAL TO CURVE.
28. A
B
PARABOLA
VERTEX F
( focus)
V
Q
T
N
N
T
900
PARABOLA
TANGENT & NORMAL
Problem 15:
TO DRAW TANGENT & NORMAL
TO THE CURVE
FROM A GIVEN POINT ( Q )
1.JOIN POINT Q TO F.
2.CONSTRUCT 900 ANGLE WITH
THIS LINE AT POINT F
3.EXTEND THE LINE TO MEET DIRECTRIX
AT T
4. JOIN THIS POINT TO Q AND EXTEND. THIS IS
TANGENT TO THE CURVE FROM Q
5.TO THIS TANGENT DRAW PERPENDICULAR
LINE FROM Q. IT IS NORMAL TO CURVE.
29. F ( focus) V
(vertex)
A
B
HYPERBOLA
TANGENT & NORMAL
N Q
N
T
900
T
Problem 16
TO DRAW TANGENT & NORMAL
TO THE CURVE
FROM A GIVEN POINT ( Q )
1.JOIN POINT Q TO F.
2.CONSTRUCT 900 ANGLE WITH THIS LINE AT
POINT F
3.EXTEND THE LINE TO MEET DIRECTRIX AT T
4. JOIN THIS POINT TO Q AND EXTEND. THIS IS
TANGENT TO CURVE FROM Q
5.TO THIS TANGENT DRAW PERPENDICULAR
LINE FROM Q. IT IS NORMAL TO CURVE.
30. ENGINEERING CURVES
Part-II
(Point undergoing two types of displacements)
INVOLUTE CYCLOID SPIRAL HELIX
1. Involute of a circle
a)String Length = pD
b)String Length > pD
c)String Length < pD
2. Pole having Composite
shape.
3. Rod Rolling over
a Semicircular Pole.
1. General Cycloid
2. Trochoid
( superior)
3. Trochoid
( Inferior)
4. Epi-Cycloid
5. Hypo-Cycloid
1. Spiral of
One Convolution.
2. Spiral of
Two Convolutions.
1. On Cylinder
2. On a Cone
Methods of Drawing
Tangents & Normals
To These Curves.
AND
31. DEFINITIONS
CYCLOID:
IS A LOCUS OF A POINT ON THE
PERIPHERY OF A CIRCLE WHICH
ROLLS ON A STRAIGHT LINE PATH.
INVOLUTE:
IS A LOCUS OF A FREE END OF A STRING
WHEN IT IS WOUND ROUND A CIRCULAR POLE
SPIRAL:
IS A CURVE GENERATED BY A POINT
WHICH REVOLVES AROUND A FIXED POINT
AND AT THE SAME MOVES TOWARDS IT.
HELIX:
IS A CURVE GENERATED BY A POINT WHICH
MOVES AROUND THE SURFACE OF A RIGHT CIRCULAR
CYLINDER / CONE AND AT THE SAME TIME ADVANCES IN AXIAL DIRECTION
AT A SPEED BEARING A CONSTANT RATIO TO THE SPPED OF ROTATION.
for more problems on helix refer topic Development of surfaces)
SUPERIORTROCHOID:
IF THE POINT IN THE DEFINATION
OF CYCLOID IS OUTSIDE THE
CIRCLE
INFERIOR TROCHOID.:
IF IT IS INSIDE THE CIRCLE
EPI-CYCLOID
IF THE CIRCLE IS ROLLING ON
ANOTHER CIRCLE FROM OUTSIDE
HYPO-CYCLOID.
IF THE CIRCLE IS ROLLING FROM
INSIDE THE OTHER CIRCLE,
32. INVOLUTE OF A CIRCLE
Problem no 17: Draw Involute of a circle.
String length is equal to the circumference of circle.
2
1
P8 P
1 2 3 4 5 6 7 8
3
4
5
6
7 8
P3
P4 4 to p
P5
P7
7 to p
6 to p
P6
P2
2 to p
P1
p
D
A
Solution Steps:
1) Point or end P of string AP is
exactly pD distance away from A.
Means if this string is wound round
the circle, it will completely cover
given circle. B will meet A after
winding.
2) Divide pD (AP) distance into 8
number of equal parts.
3) Divide circle also into 8 number of
equal parts.
4) Name after A, 1, 2, 3, 4, etc. up to
8 on pD line AP as well as on circle
(in ACW direction).
5) To radius C-1, C-2, C-3 up to C-8
draw tangents (from 1,2,3,4,etc to
circle).
6) Take distance 1 to P in compass
and mark it on tangent from point 1 on
circle (means one division less than
distance AP).
7) Name this point P1
8) Take 2-B distance in compass and
mark it on the tangent from point 2.
Name it point P2.
9) Similarly take 3 to P, 4 to P, 5 to P
up to 7 to P distance in compass and
mark on respective tangents and
locate P3, P4, P5 up to P8 (i.e. A)
points and join them in smooth curve
it is an INVOLUTE of a given circle.
33. INVOLUTE OF A CIRCLE
String length MORE than pD
2
1 2 3 4 5 6 7 8
P
1
3
4
5
6
7 8
P3
P4 4 to p
P5
5 to p
P7
6 to p
P6
P2
2 to p
P1
165 mm
(more than pD)
pD
p8
Solution Steps:
In this case string length is
more than P D.
But remember!
Whatever may be the
length of string, mark P D
distance horizontal
i.e. along the string and
divide it in 8 number of
equal parts, and not any
other distance. Rest all
steps are same as previous
INVOLUTE. Draw the
curve completely.
Problem 18: Draw Involute of a circle. String length is MORE
than the circumference of circle.
34. Problem 19: Draw Involute of a circle.
String length is LESS than the circumference of circle.
INVOLUTE OF A CIRCLE
String length LESS than pD
P
2
1
1 2 3 4 5 6 7 8
3
4
5
6
7 8
P3
3 to p
P4 4 to p
P5
5 to p
P7
6 to p
7 to p
P6
P2
2 to p
P1
1 to p
150 mm
(Less than pD)
pD
Solution Steps:
In this case string length
is Less than P D.
But remember!
Whatever may be the
length of string, mark P
D distance horizontal
i.e.along the string and
divide it in 8 number of
equal parts, and not any
other distance. Rest all
steps are same as
previous INVOLUTE.
Draw the curve
completely.
35. 1
2
4 3
5
6
1 2 3 4 5 6
A
P
pD/2
P1
1 to P
P2
2 to P
P3
3 to P
P4
4 to P
P
A to P
5 to P
P5
P6
6 to P
INVOLUTE
OF
COMPOSIT SHAPED POLE
PROBLEM 20 : A POLE IS OF A SHAPE OF HALF HEXABON AND SEMICIRCLE.
ASTRING IS TO BE WOUND HAVING LENGTH EQUAL TO THE POLE PERIMETER
DRAW PATH OF FREE END P OF STRING WHEN WOUND COMPLETELY.
(Take hex 30 mm sides and semicircle of 60 mm diameter.)
SOLUTION STEPS:
Draw pole shape as per
dimensions.
Divide semicircle in 4
parts and name those
along with corners of
hexagon.
Calculate perimeter
length.
Show it as string AP.
On this line mark 30mm
from A
Mark and name it 1
Mark pD/2 distance on it
from 1
And dividing it in 4 parts
name 2,3,4,5.
Mark point 6 on line 30
mm from 5
Now draw tangents
from all points of pole
and proper lengths as
done in all previous
involute’s problems and
complete the curve.
36. PROBLEM 21 : Rod AB 85 mm long rolls over a semicircular pole without slipping from it’s
initially vertical position till it becomes up-side-down vertical. Draw locus of both ends A & B.
1
2
3
4
pD
B
4
3
2
1
A
A1
B1
A3
A2 B2
B3
A4
B4
Solution Steps?
If you have studied previous problems
properly, you can surely solve this also.
Simply remember that this being a rod,
it will roll over the surface of pole.
Means when one end is approaching,
other end will move away from poll.
OBSERVE ILLUSTRATION CAREFULLY!
37. CYCLOIDAL GROUP OF CURVES
When rolling curve is a circle and the curve on
which it rolls is a straight line Or a circle, we get
CYCLOIDAL GROUP OF CURVES.
Superior
Hypotrochoid
Cycloidal Curves
Cycloid Epy Cycloid Hypo Cycloid
Superior
Trochoid
Inferior Trochoid
Superior
Epytrochoid
Inferior
Epytrochoid
Inferior
Hypotrochoid
38. P
C1 C2 C3 C4 C5 C6 C7 C8
p1
p2
p3
p4
p5
p6
p7
p8
1
2
3
4
5
6
7
C
pD
CYCLOID
PROBLEM 22: DRAW LOCUS OF A POINT ON THE PERIPHERY OF A CIRCLE
WHICH ROLLS ON STRAIGHT LINE PATH. Take Circle diameter as 50 mm
Solution Steps:
1) From center C draw a horizontal line equal to pD distance.
2) Divide pD distance into 8 number of equal parts and name them C1, C2, C3__ etc.
3) Divide the circle also into 8 number of equal parts and in clock wise direction, after P name 1, 2, 3 up to 8.
4) From all these points on circle draw horizontal lines. (parallel to locus of C)
5) With a fixed distance C-P in compass, C1 as center, mark a point on horizontal line from 1. Name it P.
6) Repeat this procedure from C2, C3, C4 upto C8 as centers. Mark points P2, P3, P4, P5 up to P8 on the
horizontal lines drawn from 2, 3, 4, 5, 6, 7 respectively.
7) Join all these points by curve. It is Cycloid.
39. PROBLEM 23: DRAW LOCUS OF A POINT , 5 MM AWAY FROM THE PERIPHERY OF A
CIRCLE WHICH ROLLS ON STRAIGHT LINE PATH. Take Circle diameter as 50 mm
C1 C2 C3 C4 C5 C6 C7 C8
p2
p1
p3
p4
p5
p6
p7
p8
1
2
3
4
5
6
7
C
pD
SUPERIOR TROCHOID
P
Solution Steps:
1) Draw circle of given diameter and draw a horizontal line from it’s center C of length P D and divide it
in 8 number of equal parts and name them C1, C2, C3, up to C8.
2) Draw circle by CP radius, as in this case CP is larger than radius of circle.
3) Now repeat steps as per the previous problem of cycloid, by dividing this new circle into 8 number of
equal parts and drawing lines from all these points parallel to locus of C and taking CP radius wit
different positions of C as centers, cut these lines and get different positions of P and join
4) This curve is called Superior Trochoid.
40. PROBLEM 24: DRAW LOCUS OF A POINT , 5 MM INSIDE THE PERIPHERY OF A INFERIOR TROCHOID
CIRCLE WHICH ROLLS ON STRAIGHT LINE PATH. Take Circle diameter as 50 mm
P
C1 C2 C3 C4 C5 C6 C7 C8
p1
p2
p3
p4
p5
p6
p7
p8
1
2
3
4
5
6
7
C
pD
Solution Steps:
1) Draw circle of given diameter and draw a horizontal line from it’s center C of length P D and divide it
in 8 number of equal parts and name them C1, C2, C3, up to C8.
2) Draw circle by CP radius, as in this case CP is SHORTER than radius of circle.
3) Now repeat steps as per the previous problem of cycloid, by dividing this new circle into 8 number
of equal parts and drawing lines from all these points parallel to locus of C and taking CP radius
with different positions of C as centers, cut these lines and get different positions of P and join
those in curvature.
4) This curve is called Inferior Trochoid.
41. EPI CYCLOID :
PROBLEM 25: DRAW LOCUS OF A POINT ON THE PERIPHERY OF A CIRCLE
WHICH ROLLS ON A CURVED PATH. Take diameter of rolling Circle 50 mm
And radius of directing circle i.e. curved path, 75 mm.
C C1 C2 C3 C4 C5
C6 C7
C8
P
O
R
3
r = CP
1
+rR
= 3600
2
4 5
6
7
Generating/
Rolling Circle
Directing Circle
Solution Steps:
1) When smaller circle will roll on
larger circle for one revolution it will
cover P D distance on arc and it will be
decided by included arc angle q.
2) Calculate q by formula q = (r/R) x
3600.
3) Construct angle q with radius OC
and draw an arc by taking O as center
OC as radius and form sector of angle
q.
4) Divide this sector into 8 number of
equal angular parts. And from C
onward name them C1, C2, C3 up to
C8.
5) Divide smaller circle (Generating
circle) also in 8 number of equal parts.
And next to P in clockwise direction
name those 1, 2, 3, up to 8.
6) With O as center, O-1 as radius
draw an arc in the sector. Take O-2, O-
3, O-4, O-5 up to O-8 distances with
center O, draw all concentric arcs in
sector. Take fixed distance C-P in
compass, C1 center, cut arc of 1 at P1.
Repeat procedure and locate P2, P3,
P4, P5 unto P8 (as in cycloid) and join
them by smooth curve. This is EPI –
CYCLOID.
42. HYPO CYCLOID
PROBLEM 26: DRAW LOCUS OF A POINT ON THE PERIPHERY OF A CIRCLE
WHICH ROLLS FROM THE INSIDE OF A CURVED PATH. Take diameter of
rolling circle 50 mm and radius of directing circle (curved path) 75 mm.
Solution Steps:
1) Smaller circle is rolling
here, inside the larger
circle. It has to rotate
anticlockwise to move
ahead.
2) Same steps should be
P1
taken as in case of EPI –
CYCLOID. Only change is
P2
in numbering direction of 8
C1
number of equal parts on
C
the smaller circle.
P3
3) From next to P in
anticlockwise direction,
name 1,2,3,4,5,6,7,8.
P4
4) Further all steps are
that of epi – cycloid. This
is called
HYPO – CYCLOID.
P5 P6 P7
P8
P
1
2
3
6
5
7
4
C2 C3
C4 C5 C6
C7
C8
O
rR
= 3600
OC = R ( Radius of Directing Circle)
CP = r (Radius of Generating Circle)
43. 7 6 5 4 3 2 1
P
1
2
IMPORTANT APPROACH FOR CONSTRUCTION!
FIND TOTAL ANGULAR AND TOTAL LINEAR DISPLACEMENT
AND DIVIDE BOTH IN TO SAME NUMBER OF EQUAL PARTS.
3
4
5
6
7
P2
P6
P1
P3
P5
P7
P4 O
SPIRAL
Problem 27: Draw a spiral of one convolution. Take distance PO 40 mm.
Solution Steps
1. With PO radius draw a circle
and divide it in EIGHT parts.
Name those 1,2,3,4, etc. up to 8
2 .Similarly divided line PO also in
EIGHT parts and name those
1,2,3,-- as shown.
3. Take o-1 distance from op line
and draw an arc up to O1 radius
vector. Name the point P1
4. Similarly mark points P2, P3, P4
up to P8
And join those in a smooth curve.
It is a SPIRAL of one convolution.
44. 1,9
2,10
16 13 10 8 7 6 5 4 3 2 1 P
3,11
4,12
5,13
6,14
7,15
8,16
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P15
P13 P14
SPIRAL
of
two convolutions
Problem 28
Point P is 80 mm from point O. It starts moving towards O and reaches it in two
revolutions around.it Draw locus of point P (To draw a Spiral of TWO convolutions).
IMPORTANT APPROACH FOR CONSTRUCTION!
FIND TOTAL ANGULAR AND TOTAL LINEAR DISPLACEMENT
AND DIVIDE BOTH IN TO SAME NUMBER OF EQUAL PARTS.
SOLUTION STEPS:
Total angular displacement here
is two revolutions And
Total Linear displacement here
is distance PO.
Just divide both in same parts i.e.
Circle in EIGHT parts.
( means total angular displacement
in SIXTEEN parts)
Divide PO also in SIXTEEN parts.
Rest steps are similar to the previous
problem.
45. Tangent
Normal
Q
Involute
Method of Drawing
Tangent & Normal
STEPS:
DRAW INVOLUTE AS USUAL.
MARK POINT Q ON IT AS DIRECTED.
JOIN Q TO THE CENTER OF CIRCLE C.
CONSIDERING CQ DIAMETER, DRAW
A SEMICIRCLE AS SHOWN.
MARK POINT OF INTERSECTION OF
THIS SEMICIRCLE AND POLE CIRCLE
AND JOIN IT TO Q.
THIS WILL BE NORMAL TO
INVOLUTE.
DRAW A LINE AT RIGHT ANGLE TO
THIS LINE FROM Q.
IT WILL BE TANGENT TO INVOLUTE.
INVOLUTE OF A CIRCLE
2
1
P8 P
1 2 3 4 5 6 7 8
3
4
5
6
7 8
p
D
C
46. Q
N
Normal
Tangent
CYCLOID
Method of Drawing
Tangent & Normal
STEPS:
DRAW CYCLOID AS USUAL.
MARK POINT Q ON IT AS DIRECTED.
WITH CP DISTANCE, FROM Q. CUT THE
POINT ON LOCUS OF C AND JOIN IT TO Q.
FROM THIS POINT DROP A PERPENDICULAR
ON GROUND LINE AND NAME IT N
JOIN N WITH Q.THIS WILL BE NORMAL TO
CYCLOID.
DRAW A LINE AT RIGHT ANGLE TO
THIS LINE FROM Q.
IT WILL BE TANGENT TO CYCLOID.
P
CYCLOID
C1 C2 C3 C4 C5 C6 C7 C8
pD
C
CP
47. SPIRAL (ONE CONVOLUSION.)
Normal
7 6 5 4 3 2 1
P
1
2
3
4
5
6
7
P2
P6
P1
P3
P5
P7
P4 O
Tangent
Q
Spiral.
Method of Drawing
Tangent & Normal
Constant of the Curve =
Difference in length of any radius vectors
Angle between the corresponding
radius vector in radian.
OP – OP2
p/2
OP – OP2
1.57
= =
= 3.185 m.m.
STEPS:
*DRAW SPIRAL AS USUAL.
DRAW A SMALL CIRCLE OF RADIUS EQUAL TO THE
CONSTANT OF CURVE CALCULATED ABOVE.
* LOCATE POINT Q AS DISCRIBED IN PROBLEM AND
THROUGH IT DRAW A TANGENTTO THIS SMALLER
CIRCLE.THIS IS A NORMAL TO THE SPIRAL.
*DRAW A LINE AT RIGHT ANGLE
*TO THIS LINE FROM Q.
IT WILL BE TANGENT TO CYCLOID.