This document provides a list of parts for the knives and fingers and table auger components for a Massey Ferguson MF 7250/7252 combine. It includes 141 line items with part numbers, quantities, descriptions, and other identifying information for each part. The parts are organized by component and include knives and fingers for cutting platforms ranging from 14 to 20 feet, as well as parts for the table auger on the right side of the combine.
Massey ferguson mf 7254 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers of Massey Ferguson MF 7254/7256 combines. It includes 142 line items with part numbers, quantities, descriptions, and additional comments for components ranging from clips and bolts to knives, plates, shafts and augers for header widths ranging from 14' to 20'. Footnotes provide additional information on variations in components between different configurations.
Massey ferguson mf 7256 cerea combine parts catalogue manualhhfjksekmm
This document provides a list of parts for a Massey Ferguson MF 7256 CEREA COMBINE. It includes over 140 individual parts related to the combine's knives and fingers assembly for various configurations ranging from 14 to 20 feet. Each part is identified by a unique part number, and some parts have multiple part numbers to indicate different sizes or serial number ranges.
Massey ferguson mf 133135 mkiii135 v tractors parts catalogue manualhhfjksekmm
This document provides a parts list for Massey Ferguson MF 133/135 MKIII/135 V tractors. It includes over 40 items related to the engine, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each item lists the part number, quantity, description, and any relevant comments. The parts are organized into sections based on the engine components.
Massey ferguson mf 7272 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives, fingers, table augers, and other components for a Massey Ferguson MF 7272 combine harvester. It includes over 140 individual part numbers, descriptions, and quantities. The parts are grouped by component and cover harvester widths ranging from 16 to 20 feet. Footnotes provide additional part number options and application details.
Massey ferguson mf 7272 cerea combines parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers for Massey Ferguson MF 7272/7274/7278 CEREA combines. It includes 161 items with part numbers, quantities, descriptions, and other identifying information for each part. Footnotes provide additional details on some parts that have multiple options or applications. The parts are organized into sections for the knives and fingers - freeflow system (items 1-67), and the table auger right hand and left hand (items 68-161).
Massey ferguson mf 7274 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers on Massey Ferguson MF 7274/7276 combines. It includes 141 items with part numbers, quantities, descriptions, and additional comments for some items. Footnotes provide additional information about specific part applications.
Massey ferguson mf 7250 combine parts catalogue manualjjfksekdmejik
The document provides a list of parts for the knives and fingers and table auger assemblies for a Massey Ferguson MF 7250/7252 combine. It includes 142 line items specifying the part numbers, quantities, descriptions and additional comments for each component. The assemblies cover header widths ranging from 14' to 20'.
Massey ferguson mf 7252 combine parts catalogue manualjjfksekdmejik
The document provides a list of parts for the knives and fingers and table auger assemblies for a Massey Ferguson MF 7250/7252 combine. It includes 142 line items specifying the part numbers, quantities, descriptions and additional comments for each component. The assemblies cover header widths ranging from 14 feet to 20 feet.
Massey ferguson mf 7254 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers of Massey Ferguson MF 7254/7256 combines. It includes 142 line items with part numbers, quantities, descriptions, and additional comments for components ranging from clips and bolts to knives, plates, shafts and augers for header widths ranging from 14' to 20'. Footnotes provide additional information on variations in components between different configurations.
Massey ferguson mf 7256 cerea combine parts catalogue manualhhfjksekmm
This document provides a list of parts for a Massey Ferguson MF 7256 CEREA COMBINE. It includes over 140 individual parts related to the combine's knives and fingers assembly for various configurations ranging from 14 to 20 feet. Each part is identified by a unique part number, and some parts have multiple part numbers to indicate different sizes or serial number ranges.
Massey ferguson mf 133135 mkiii135 v tractors parts catalogue manualhhfjksekmm
This document provides a parts list for Massey Ferguson MF 133/135 MKIII/135 V tractors. It includes over 40 items related to the engine, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each item lists the part number, quantity, description, and any relevant comments. The parts are organized into sections based on the engine components.
Massey ferguson mf 7272 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives, fingers, table augers, and other components for a Massey Ferguson MF 7272 combine harvester. It includes over 140 individual part numbers, descriptions, and quantities. The parts are grouped by component and cover harvester widths ranging from 16 to 20 feet. Footnotes provide additional part number options and application details.
Massey ferguson mf 7272 cerea combines parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers for Massey Ferguson MF 7272/7274/7278 CEREA combines. It includes 161 items with part numbers, quantities, descriptions, and other identifying information for each part. Footnotes provide additional details on some parts that have multiple options or applications. The parts are organized into sections for the knives and fingers - freeflow system (items 1-67), and the table auger right hand and left hand (items 68-161).
Massey ferguson mf 7274 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers on Massey Ferguson MF 7274/7276 combines. It includes 141 items with part numbers, quantities, descriptions, and additional comments for some items. Footnotes provide additional information about specific part applications.
Massey ferguson mf 7250 combine parts catalogue manualjjfksekdmejik
The document provides a list of parts for the knives and fingers and table auger assemblies for a Massey Ferguson MF 7250/7252 combine. It includes 142 line items specifying the part numbers, quantities, descriptions and additional comments for each component. The assemblies cover header widths ranging from 14' to 20'.
Massey ferguson mf 7252 combine parts catalogue manualjjfksekdmejik
The document provides a list of parts for the knives and fingers and table auger assemblies for a Massey Ferguson MF 7250/7252 combine. It includes 142 line items specifying the part numbers, quantities, descriptions and additional comments for each component. The assemblies cover header widths ranging from 14 feet to 20 feet.
Kawasaki 80 z6 wheel loader parts catalogue manual (serial no. 80c7 0101 and up)hhfjksekmm
This document is a parts catalog for a Hitachi wheel loader powered by a Cummins QSB6.7 engine. It contains a table of contents listing the major systems of the loader and their corresponding parts sections. These include the engine, powertrain, chassis, cab, electrical systems, hydraulics, brakes, and controls. Each part is assigned a unique identification number and name in the catalog for ordering purposes.
Kawasaki 70 z7b wheel loader service repair manual (serial no. 70c6 5001 and up)hhfjksekmm
This document provides disassembly and assembly instructions for removing and installing the cab on a wheel loader. It outlines 14 steps including draining fluids, releasing pressures, removing bolts and covers. Precautions are provided regarding escaping fluids, capping open lines, and ensuring pressures are released from the hydraulic and other systems. The document contains diagrams illustrating the specific components and their locations.
Caterpillar cat 325 l excavator (prefix 7lm) service repair manual (7lm00001 ...hhfjksekmm
This document provides instructions for disassembling the travel motor on 325, 325B, and 325L excavators. It describes 24 steps to fully disassemble the travel motor, including removing the head, brake piston, barrel assembly, shoe retainer, springs, and shaft. Special markings and care are required to keep components in their original positions for reassembly.
Caterpillar cat 325 a fm l excavator (prefix 7 lm) service repair manual (7lm...hhfjksekmm
This document provides instructions for disassembling a travel motor on 325, 325B and 325L excavators. It describes 24 steps to fully disassemble the travel motor, identifying each component and how to remove it. This includes removing the head, brake piston, barrel assembly, shoe retainer, springs and other internal components. Special tools may be required and precautions around containing fluids are noted. The process is similar between 325 and 325B excavator models, with some weight and bolt quantity differences called out.
Caterpillar cat 349 f excavator (prefix hlb) service repair manual (hlb00001 ...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L excavators. It begins by listing the required tools and safety precautions. The disassembly process is then described in 32 steps and illustrated with diagrams, removing components like the motor head assembly, piston assembly, barrel assembly, swashplate, and shaft assembly. The assembly section provides specifications, lubrication and torque requirements for components, and illustrated assembly steps in reverse order.
Caterpillar cat 349 f excavator (prefix bz2) service repair manual (bz200001 ...hhfjksekmm
The document provides step-by-step instructions to disassemble a travel motor on a 349F and 349F L excavator. It describes 27 steps to remove components such as plugs, seals, springs, bearings, valves, and housing pieces. Various tools are required including lifting devices, bolts, nuts, and pullers to separate the motor head assembly, rotating group, and individual internal parts in a safe manner while taking precautions for any released spring forces.
Caterpillar cat 349 e l vg excavator (prefix etc) service repair manual (etc0...hhfjksekmm
The document provides instructions for removing and installing various engine components on a Caterpillar 349E L excavator, including:
1) Removing and installing electronic unit injector sleeves, which requires using specialized tools to pull the sleeves from the cylinder head and reinstall them with new O-rings.
2) Procedures for removing and installing the air cleaner housing, turbocharger, exhaust balance solenoid valve, and exhaust sensor lines.
3) Detailed illustrations and torque specifications are provided for correctly performing each removal and installation step. Proper cleaning and use of new sealing components is emphasized.
Caterpillar cat 349 e l vg excavator (prefix kfx) service repair manual (kfx0...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
Caterpillar cat 349 e l excavator (prefix whz) service repair manual (whz0000...hhfjksekmm
The document provides instructions to disassemble and assemble the final drive on a 349E excavator. It describes 33 steps to disassemble the final drive by removing components like the cover, ring gear, carrier assembly, planetary gears, and seals. It then describes the assembly process, providing specifications for torque and installation of components like bolts, bearings, seals, and shims. Proper cleaning and use of locking compounds or lubricants is emphasized to ensure correct assembly.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...hhfjksekmm
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing over 20 components including bolts, seals, retainers, discs, and housing assemblies.
3) Assembly is the reverse of disassembly, requiring pressing or installing components like bearings, seals, sleeves and housings back into place and securing with bolts, pins or retaining rings. Cleanliness and use of specified tools and adhesives is important for successful reassembly.
Caterpillar cat 349 e l excavator (prefix spg) service repair manual (spg0000...hhfjksekmm
The document provides instructions for disassembling and assembling the travel motor of a 349E excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps and specifies torques and lubricants for reinstalling components in reverse order, like installing seals, pins, bearings onto the shaft assembly before pressing it into the motor housing. Tolerances and specifications are provided for components like springs, seals, and fasteners.
Caterpillar cat 349 e l excavator (prefix rgh) service repair manual (rgh0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves 27 steps to remove components from the motor housing, head assembly, rotating group, and barrel assembly. The assembly process describes 13 steps and specifications to reinstall components in the reverse order, ensuring proper torque values and lubrication of parts. Key components include the motor housing, head assembly, shaft assembly, barrel assembly, pistons, bearings, seals, springs, and related hardware.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...hhfjksekmm
This document provides assembly instructions for a 349E L excavator final drive group. It includes specifications for the components and a step-by-step procedure for assembling the final drive. Some key steps include applying anti-seize compound to bearings, using shims to adjust clearances, and torquing bolts to the specified values. Tools required include a transmission repair stand, eyebolts, and torque wrenches. The assembly procedure has 30 steps and ensures the final drive is properly assembled and adjusted.
Caterpillar cat 349 e l excavator (prefix mpz) service repair manual (mpz0000...hhfjksekmm
This document provides instructions for removing and installing a water pump on a 349E L excavator. The removal procedure involves: 1) Removing the water temperature regulator and fan drive; 2) Removing various sheet assemblies and supports; 3) Disconnecting support assemblies and repositioning harness assemblies; 4) Removing hoses. The installation procedure involves reversing the removal steps and applying threadlock to bolts.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
Caterpillar cat 349 e l excavator (prefix fjb) service repair manual (fjb0000...hhfjksekmm
The document provides instructions for disassembling and assembling a hydraulic fan drive for a 349E excavator. It describes 22 steps to disassemble the components, including removing bolts, retainers, seals, discs, and housing parts. It then describes 14 steps for reassembling the components, applying sealant and installing seals, sleeves, bearings and housing pieces in the reverse order of disassembly. Precision cleaning and special tools are required to prevent damage to parts during the process.
Caterpillar cat 349 e l excavator (prefix etc) service repair manual (etc0000...hhfjksekmm
The document provides instructions for removing and installing various engine components on a Caterpillar 349E L excavator, including:
1) Removing and installing electronic unit injector sleeves, which requires using specialized tools to pull the sleeves from the cylinder head and clean the bore before reinstalling with new O-rings.
2) Procedures for removing and installing the air cleaner housing, turbocharger, exhaust balance solenoid valve, and exhaust sensor lines.
3) Detailed illustrations and torque specifications are provided for correctly performing each removal and installation step.
Kawasaki 80 z6 wheel loader parts catalogue manual (serial no. 80c7 0101 and up)hhfjksekmm
This document is a parts catalog for a Hitachi wheel loader powered by a Cummins QSB6.7 engine. It contains a table of contents listing the major systems of the loader and their corresponding parts sections. These include the engine, powertrain, chassis, cab, electrical systems, hydraulics, brakes, and controls. Each part is assigned a unique identification number and name in the catalog for ordering purposes.
Kawasaki 70 z7b wheel loader service repair manual (serial no. 70c6 5001 and up)hhfjksekmm
This document provides disassembly and assembly instructions for removing and installing the cab on a wheel loader. It outlines 14 steps including draining fluids, releasing pressures, removing bolts and covers. Precautions are provided regarding escaping fluids, capping open lines, and ensuring pressures are released from the hydraulic and other systems. The document contains diagrams illustrating the specific components and their locations.
Caterpillar cat 325 l excavator (prefix 7lm) service repair manual (7lm00001 ...hhfjksekmm
This document provides instructions for disassembling the travel motor on 325, 325B, and 325L excavators. It describes 24 steps to fully disassemble the travel motor, including removing the head, brake piston, barrel assembly, shoe retainer, springs, and shaft. Special markings and care are required to keep components in their original positions for reassembly.
Caterpillar cat 325 a fm l excavator (prefix 7 lm) service repair manual (7lm...hhfjksekmm
This document provides instructions for disassembling a travel motor on 325, 325B and 325L excavators. It describes 24 steps to fully disassemble the travel motor, identifying each component and how to remove it. This includes removing the head, brake piston, barrel assembly, shoe retainer, springs and other internal components. Special tools may be required and precautions around containing fluids are noted. The process is similar between 325 and 325B excavator models, with some weight and bolt quantity differences called out.
Caterpillar cat 349 f excavator (prefix hlb) service repair manual (hlb00001 ...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L excavators. It begins by listing the required tools and safety precautions. The disassembly process is then described in 32 steps and illustrated with diagrams, removing components like the motor head assembly, piston assembly, barrel assembly, swashplate, and shaft assembly. The assembly section provides specifications, lubrication and torque requirements for components, and illustrated assembly steps in reverse order.
Caterpillar cat 349 f excavator (prefix bz2) service repair manual (bz200001 ...hhfjksekmm
The document provides step-by-step instructions to disassemble a travel motor on a 349F and 349F L excavator. It describes 27 steps to remove components such as plugs, seals, springs, bearings, valves, and housing pieces. Various tools are required including lifting devices, bolts, nuts, and pullers to separate the motor head assembly, rotating group, and individual internal parts in a safe manner while taking precautions for any released spring forces.
Caterpillar cat 349 e l vg excavator (prefix etc) service repair manual (etc0...hhfjksekmm
The document provides instructions for removing and installing various engine components on a Caterpillar 349E L excavator, including:
1) Removing and installing electronic unit injector sleeves, which requires using specialized tools to pull the sleeves from the cylinder head and reinstall them with new O-rings.
2) Procedures for removing and installing the air cleaner housing, turbocharger, exhaust balance solenoid valve, and exhaust sensor lines.
3) Detailed illustrations and torque specifications are provided for correctly performing each removal and installation step. Proper cleaning and use of new sealing components is emphasized.
Caterpillar cat 349 e l vg excavator (prefix kfx) service repair manual (kfx0...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
Caterpillar cat 349 e l excavator (prefix whz) service repair manual (whz0000...hhfjksekmm
The document provides instructions to disassemble and assemble the final drive on a 349E excavator. It describes 33 steps to disassemble the final drive by removing components like the cover, ring gear, carrier assembly, planetary gears, and seals. It then describes the assembly process, providing specifications for torque and installation of components like bolts, bearings, seals, and shims. Proper cleaning and use of locking compounds or lubricants is emphasized to ensure correct assembly.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...hhfjksekmm
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing over 20 components including bolts, seals, retainers, discs, and housing assemblies.
3) Assembly is the reverse of disassembly, requiring pressing or installing components like bearings, seals, sleeves and housings back into place and securing with bolts, pins or retaining rings. Cleanliness and use of specified tools and adhesives is important for successful reassembly.
Caterpillar cat 349 e l excavator (prefix spg) service repair manual (spg0000...hhfjksekmm
The document provides instructions for disassembling and assembling the travel motor of a 349E excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps and specifies torques and lubricants for reinstalling components in reverse order, like installing seals, pins, bearings onto the shaft assembly before pressing it into the motor housing. Tolerances and specifications are provided for components like springs, seals, and fasteners.
Caterpillar cat 349 e l excavator (prefix rgh) service repair manual (rgh0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves 27 steps to remove components from the motor housing, head assembly, rotating group, and barrel assembly. The assembly process describes 13 steps and specifications to reinstall components in the reverse order, ensuring proper torque values and lubrication of parts. Key components include the motor housing, head assembly, shaft assembly, barrel assembly, pistons, bearings, seals, springs, and related hardware.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...hhfjksekmm
This document provides assembly instructions for a 349E L excavator final drive group. It includes specifications for the components and a step-by-step procedure for assembling the final drive. Some key steps include applying anti-seize compound to bearings, using shims to adjust clearances, and torquing bolts to the specified values. Tools required include a transmission repair stand, eyebolts, and torque wrenches. The assembly procedure has 30 steps and ensures the final drive is properly assembled and adjusted.
Caterpillar cat 349 e l excavator (prefix mpz) service repair manual (mpz0000...hhfjksekmm
This document provides instructions for removing and installing a water pump on a 349E L excavator. The removal procedure involves: 1) Removing the water temperature regulator and fan drive; 2) Removing various sheet assemblies and supports; 3) Disconnecting support assemblies and repositioning harness assemblies; 4) Removing hoses. The installation procedure involves reversing the removal steps and applying threadlock to bolts.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
Caterpillar cat 349 e l excavator (prefix fjb) service repair manual (fjb0000...hhfjksekmm
The document provides instructions for disassembling and assembling a hydraulic fan drive for a 349E excavator. It describes 22 steps to disassemble the components, including removing bolts, retainers, seals, discs, and housing parts. It then describes 14 steps for reassembling the components, applying sealant and installing seals, sleeves, bearings and housing pieces in the reverse order of disassembly. Precision cleaning and special tools are required to prevent damage to parts during the process.
Caterpillar cat 349 e l excavator (prefix etc) service repair manual (etc0000...hhfjksekmm
The document provides instructions for removing and installing various engine components on a Caterpillar 349E L excavator, including:
1) Removing and installing electronic unit injector sleeves, which requires using specialized tools to pull the sleeves from the cylinder head and clean the bore before reinstalling with new O-rings.
2) Procedures for removing and installing the air cleaner housing, turbocharger, exhaust balance solenoid valve, and exhaust sensor lines.
3) Detailed illustrations and torque specifications are provided for correctly performing each removal and installation step.
Our expert Porsche windshield services ensure your driving experience remains safe and clear. From meticulous repairs of chips and cracks to precise replacements using genuine Porsche parts, we guarantee optimal visibility and structural integrity. Trust our certified technicians to restore your Porsche to its pristine condition, ensuring you drive with confidence on every journey.
20. Massey Ferguson
MF 7250/7252 COMBINE - 1637400 1637400
Knives And Fingers - Powerflow - 14' - 20' Page001-0006
Item Part Number Qty Description Comments
97 D42611800 8 Pin ACC AUTO-LEVEL
98 D28284259 2 Sensor ACC AUTO-LEVEL
99 D28284260 2 Sensor ACC AUTO-LEVEL
100 D40405100 4 Hex. Sock.
Screw
ACC AUTO-LEVEL
101 D40405300 4 Screw ACC AUTO-LEVEL
102 D20400506 20 Washer ACC AUTO-LEVEL
103 D28284363 4 Link ACC AUTO-LEVEL
104 D41087500 8 Locknut ACC AUTO-LEVEL
105 D28284227 2 Lever Left Hand
ACC AUTO-LEVEL
106 D42611900 8 Pin ACC AUTO-LEVEL
107 D28281693 2 Spring ACC AUTO-LEVEL
108 D28284232 2 Shaft ACC AUTO-LEVEL
109 D46437300 4 Toggle ACC AUTO-LEVEL
110 D41010600 4 Nut ACC AUTO-LEVEL
111 D28780446 2 Rod ACC AUTO-LEVEL
112 D28284226 2 Lever Right Hand
ACC AUTO-LEVEL
113 D28284361 2 Connecting Link ACC AUTO-LEVEL
114 D28284360 2 Plate ACC AUTO-LEVEL
115 D28780523 2 Potentiometer ACC AUTO-LEVEL
116 D40464900 2 Screw ACC AUTO-LEVEL
117 D41010700 4 Nut ACC AUTO-LEVEL
118 D41013500 8 Nut ACC AUTO-LEVEL
119 D20400506 16 Washer ACC AUTO-LEVEL
120 D40404900 12 Hex. Sock.
Screw
ACC AUTO-LEVEL
121 D28284458 4 Bearing Bush ACC AUTO-LEVEL
122 D28284456 4 Bush ACC AUTO-LEVEL
123 D41088800 2 Locknut ACC AUTO-LEVEL
124 D28281576 1 Plate
125 D28281575 1 Shim
126 D28281574 1 Plate
127 D40423700 2 Hex. Sock.
Screw
128 D20400506 2 Washer
129 D41087500 2 Locknut
130 D18281572 1 Guard
131 D20400506 3 Washer
132 D41087500 3 Locknut
133 D40405000 1 Hex. Sock.
Screw
134 D40402400 X Hex. Sock.
Screw
Alternative D41306100
135 1441462X1 X Locknut Alternative D41306100
Replace and repair. Old not interchangeable with new D41087400
136 D20400404 4 Washer
142 D45483000 1 O Ring [B]
FOOTNOTE [A] USED ONLY IN KNIFE DRIVES WITH 6 HOLES IN BEARING HOUSING BOTTOM
FOOTNOTE [B] USED ONLY IN KNIFE DRIVES WITH 8HOLES IN BEARING HOUSING BOTTOM AND BULGES SIDES
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.