This presentation discusses plastering and provides details on materials, tools, types of plaster, and procedures. It introduces plastering as a process of covering rough surfaces with a plastic material to create smooth, durable coatings. The main types of plaster covered are lime, cement, mud, and stucco plaster. Procedures for cement plastering including surface preparation, application of preliminary, first, and second coats are outlined. Common plastering issues like cracking, efflorescence, filling out, and blowing are defined along with solutions. Advantages of durability and ease of application are balanced with disadvantages of repair costs and potential for cracking.
7. Plastering
Defination of plastering :
The word “plaster” comes from the Greek language
meaning “to daub on”.
This is the process of covering rough surfaces with a
plastic material to obtain an even, smooth, regular,
clean & durable surfaces.
On the other hand we say that; A mixture of
lime or gypsum, sand and water, sometimes with
fiber added, that harden to a smooth solid and used
for coating walls and ceilings.
8. Charateristics of good plastering
1. Should be fire and sound.
2. Should provide a smooth, non absorbent
and washable surface
3. Should adhere to the surfcesfirmly .
4. Should be weather proof .
5. Should be free from volumetric changes
while setting and drying
14. Kinds of plastering :
There are several different types of
plaster such as:
(a) Lime plaster
(b) Cement plaster
(c) Mud plaster
(d) Stucco plaster
(e) plaster on lathe
15. Lime plaster:
When lime is used as the binding materials it is
called lime plaster.
Lime plaster is a type of plaster composed
of hydrated lime , sand and water . lime plaster
is similar to lime mortar , the main difference is
the based on use rather than composition.
Hydralic lime is harder and stronger. Moter for
lime plaster is usually prepared by mixing sand
and lime in equal properties .Cement is small
quantity added to the mixer to improve its
strength
17. MUD PLASTER
The surface to be plastered is prepared exactly in
the same manner as that for lime or cement plaster.
Mud plaster is generally applied in two coats, the
first coat being 18mm thick while the thickness of
the second coat is kept 6mm.
FIG:MUD PLASTERING
19. Stucco is the name given to a decorative type
of plaster which gives an excellent finish.
Stucco plaster can be used for interior as well
as exterior surfaces. It is usually laid in three
coats making the total thickness of the plaster
to about 25mm. the first coat is called the
scratch coat ; the second a finer coat , also
known as the brown coat , and the third is
called white coat or finishing coat.
STUCCO PLASTER
21. CEMENT PLASTER
When cement is used as the binding materials , it is
called cement plaster . It isespecially suited for damp
condition .cement plaster is usually applied in one coat.
The thickness of coat can be 12mm,15mm or 20mm
depending upon the site conditions and type of building.
When the thickness of plaster is more than 15mm.6mm
thickness of cement plaster and cement mortar 1:3 or 1:4
is recommended for cement plastering on RCC
surfaces.
23. PLASTER OF LATH
Lathing may be either of wood or
that of expanded metal. Wooden
lathe consists of thin strips of well
seasoned wood , about 25mm .in
width and 90 to 120cm.
25. Procedure of cement plastering
*Average thickness of cement plastering is 12-15mm.
*Clean the surface with water and is kept wet till applying plaster.
*Preliminary coat is applied on the surface to fill up hollow portion of
masonry.
*First coat is applied with a thickness of 9-10mm.
*Second coat is applied after 6hrs and thickness of second coat is 10mm.
*Surface is polished with a trowel.
*Third coat if required is applied with maximum thickness 3mm.
*Completed plaster is allowed to rest for 24hrs and well watered for at
least one week.
*Slow setting under higher humidity improves the strength of plaster
28. Cracking
a. Old surface not being
properly prepared.
b. Movement in the backing
either on account due to
shrinkage caused by the drying of
the backing material.
c. Excessive shrinkage of plaster
due to the application of
mortar in thick coats.
29. Efflorecence FIG:Efflorecence
It is solvable salt are present in
bricks or the mortar they absorb
moisture.
From atmosphere and go in to
solution which appears on the
surface in the form of whitish
substance as the moisture dries
out and the salts crystallize.
Remove of efflorescence by
applying a solution zinc sulphet
and water and brushing off the
surface when dry.
30. Filling out of plaster
Filling out plaster
a. The adhesion of the
plaster to the back
ground may not be
perfect.
b. The suction of the
backing materials may
not be uniform.
c. Excessive thermal
changes in plaster.
31. Blowing of plaster
This consists of information of small
patches of plaster swelling out beyond
the plastered surface and chiefly due to
improper slaking of lime particles in the
plaster.
32. Advantages of plastering
a. Easy in application.
b. No surgery is required.
C. Plaster is the most common form of interior
wall finishing.
d. If properly mixed and applied , a plaster
coating creates a stronger and more durable.
e.Provides facilities for cleaning .
Increase durability to the work of the
foundation.
f. Protect the basic work of the climate action.
33. Disadvantages of plasterig
a. When plaster cracks then difficult to
repair.
b. Repairing is very expensive.
c. Despite the extra labor of hanging
and finishing drywall, it tends to be
less expensive than plastering
34. Conclution
*Some main properties of plaster that was
highlighted by consumers and the durability ,
workability , thickness, and setting time.
*Also , the tools and materials used in
plastering process was listed.
* In addition, the method to do plastering was
explained.
* Finally, the problem for common plastering
process and their suggested solution.