The document is an introduction chapter from "The Little Black Book of Project Management". It discusses how defining the purpose, tasks, schedule, and budget of a project, as well as controlling the team, coordination, monitoring, and taking action are key to successfully managing projects. Projects differ from routine tasks in that they have specific goals and deadlines, involve related multi-department activities, and produce a tangible desired result.
1 of 155
Download to read offline
More Related Content
Pmp The Little Black Book Of Project Management
1. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Introduction
Title Chapter 1—Organizing for the Long Term
Chapter 2—Creating the Plan
----------- Chapter 3—Choosing the Project Team
Chapter 4—The Project Budget
Chapter 5—Establishing a Schedule
Chapter 6—The Rules of Flowcharting
Chapter 7—The Project Flowchart
Chapter 8—Supporting Documentation
Chapter 9—Project Review
Chapter 10—The Communication Challenge
Chapter 11—Project Management and Your Career
Appendix A
Index
3. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Table of Contents
Title
Introduction
Prediction is very difficult, especially about the future.
----------- —Neils Bohr
Imagine this situation: You’ve just been given the job of completing a very large project. Your
sources are limited, your budget is very small, and your deadline is very short. The precise goals
of the job have not been defined as well as you’d like, and you don’t know where to start.
This situation challenges your management skill on many levels. You’ll have to ask for a
definition of just what you’re expected to achieve. Then you’ll need to plan well enough so that
you will accomplish the desired result, by the deadline and within budget. Rarely will you be
given a well-defined, fully budgeted project and asked merely to pilot your resources through to
the end result. More likely you will be given an assignment that includes nothing beyond the
demand for a generalized end result. The rest is up to you.
This Little Black Book shows you how to take charge of a big project, define it, and then break it down into
smaller, more manageable phases. You will learn how to control a budget and schedule and lead a project
team through to successful completion. You will find out how to anticipate problems and plan for them during
the various project phases. And you will discover methods for establishing clear objectives for your project,
even when they are not defined at the point of assignment.
Because it’s a long-term process, project management causes even well-organized managers to experience
difficulty. But if you are accustomed to controlling routine work in your own department, you already
understand recurring workload cycles, staffing limitations, and budgetary restraints—the same issues you’ll
confront with projects.
However, the context is different: First, a project is nonrecurring, so problems and solutions are not matters of
routine; second, unlike the limitations on your department’s range of tasks, a project often crosses
departmental and authority lines; third, a project is planned and organized over several months, whereas
recurring tasks are projected ahead only for a few days or weeks.
Managing a project doesn’t require any skills you don’t already possess; you will employ the same
5. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title
Chapter 1
Organizing for the Long Term
----------- Every moment spent planning saves three or four in execution.
—Crawford Greenwalt
The newly hired mail room employee noticed an elderly gentleman sitting in a corner and slowly
sorting interoffice envelopes.
“Who’s that?” he asked the supervisor.
“Oh, that’s Charley. He’s been with the company for about forty years.”
“And he never made it out of the mail room?” the employee asked.
“He did, but he asked to be transferred here—after spending several years as a project
manager.”
Dread. That’s a common reaction to being given a project assignment. Thought of as the corporate version of
a root canal, a project is often seen as something to avoid rather than to seek.
But once you discover that the job of organizing and executing a project is not all that difficult, the
assignment will take on a different character. Instead of a difficult, if not impossible, task, it will become an
interesting challenge to your organizational skills—perhaps it will serve as an outlet for your creativity or a
way to demonstrate your skill—even as an excellent forum for developing your leadership abilities.
The secret is not in learning new skills but in applying the skills you already have, but in a new arena. The
project is probaby an exception to your normal routine. You need to operate with an eye to a longer-term
deadline than you have in the weekly or monthly cycle you’re more likely to experience in your department.
Of course, some managers operate projects routinely, and are accustomed to dealing with a unique set of
problems, restrictions, and deadlines in each case. For example, engineers, contractors, or architects move
from one project to another, often involving circumstances never encountered before. Still, they apply the
6. same organizational skills to each and every job. That’s their routine.
It’s more likely that you run a department that deals with a series of recurring tasks from one month to
another: The same assignments, procedures, and results occur within the cycle; the same people perform the
same routines each time; and you can anticipate problems and deal with them in a very predictable way. So
when you are given an exceptional task—a project—you may be very uncomfortable and find yourself
asking:
How do I get started?
Exactly what am I expected to achieve?
Who is responsible for what, and how am I supposed to coordinate the effort?
It’s also likely that you’re used to receiving information from a known source and at a specific time. You
perform your routines—recording, interpreting, reporting, processing—and then convey the end result to
someone else. But on projects, you’ll be working with other departments so the steps involved in receiving,
performing, and reporting will probably be very different from what you’re used to.
This is a big challenge for someone who is assigned a one-time job (or a series of jobs) that are not part of his
or her usual experience. And as for all new challenges, the key to staying in control involves the elements of
definition, planning, and organization.
PROJECT DEFINITIONS
The definition of project varies from one company to another. In some cases, the word is used loosely to
describe any task, exceptional or recurring. Thus, a “project” could mean any routine that demands time. In
this book, we distinguish between a project and a routine in four ways, as summarized in Figure 1-1.
1. A project is an exception. A project involves investigating, compiling, arranging, and reporting
information outside the range of usual activities while routine is defined within the range of a
department’s function.
Example: The manager of a customer service department prepares monthly reports identifying
customer contact trends (complaints, inquiries, suggestions) as part of her routine. When she is given
the task of investigating and comparing automated customer service software, she is responsible for a
project.
2. Project activities are related. Routines for recurring tasks performed in your department are related
to the activities that define and distinguish that department only, whereas the activities involved in
project phases are related to one another and to a desired end result. So your project may involve
coordinating work that not only takes place in your immediate department but extends to actions in
other departments, as well as to outside resources.
Figure 1-1 Comparing projects and routine.
Example: The customer service manager given the project of investigating automated systems may
work with the data processing manager, the marketing department, and several suppliers. Collectively,
the internal and external information will help her identify the points of comparison.
3. Project goals and deadlines are specific. Recurring tasks may be managed with departmental goals
in mind; but these goals tend to remain fixed, or move forward only with time. The same is true of
deadlines; you may face weekly or monthly deadlines for completion of reports, processing, and
closing. Projects, though, have singular goals that will be either reached or missed. And projects have
clear starting points and completion dates.
Example: The customer service manager is told to compare prices and features of software, make a
recommendation, and complete a report within three months. This project has a clear goal and deadline.
In comparison, her department’s routine goals and deadlines extend from one month to another.
4. The desired result is identified. Routines are aimed not at one outcome but at maintenance of
processes, whereas the research, development of procedures, or construction of systems or buildings on
a project produce a tangible, desired result.
8. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title These constraints, while common to all departments and recognized by every manger, are perpetual. Not all
three are encountered consistently in all cases. And they might not even serve as guidelines for your actions.
Example: The manager of an insurance claims office keeps an eye on the volume of work, which varies from
one day to the next. His primary concern is completion of processing to avoid backlogs of work. That may be
----------- called a desired result, but it is a constant one and not a one-time goal.
Example: A department is given an expense budget for the next year. In several cases, assigned expense
levels are allocated and beyond the manager’s immediate control. Thus, he does not track all aspects of the
budget with control in mind.
Example: An accounting department records transactions on a daily basis, and cuts off each day at 3 P.M.,
when a batch is balanced and processed on an automated system. The daily deadline is part of the recurring
routine and has an ongoing series of cut-off points, unlike a longer-term deadline.
But projects succeed or fail purely on the basis of the three constraints; as follows:
1. Result. Completion of a specific, defined task or a series of tasks is the primary driving force behind
a project. Unlike the recurring tasks faced on the departmental level, a project is targeted to the idea of
a finite, one-time result.
2. Budget. A project’s budget is often separate from the departmental budget. Unlike a department’s
staff, a project team operates with a degree of independence—in terms of both control and money.
Project teams often include people from several different departments; thus, budgetary control cannot
be organized along departmental lines. A project may require a capital budget as well as an expense
budget. As project manager, you’re likely to have a greater degree of control over variances.
3. Time. Projects have specific starting points and stopping points. A well-organized project is based
on careful controls over completion phases, which involve the use of each team member’s time.
DEFINITION AND CONTROL
In later chapters, you’ll learn how to manage projects with the constraints of result, budget, and time in mind,
constraints that define the project and the way it will be organized. For now, it’s important to understand the
two components that lead to the successful completion of a project: definition and control. Without either of
these, you will be unlikely to achieve (or know) the final result, within the budget, and within the deadline.
9. Example: A manager is given the assignment of preparing his department for automation. He puts a lot of
effort into defining the purpose, breaking out tasks, and devising a schedule and a budget. However, once the
work begins, the project falls apart because no control functions were planned. There is no specific
assignment of responsibility; nor does the manager compare actual progress to the schedule or watch project
expenses to keep them in line with the budget.
Example: A manager embarks on a project with a carefully designed monitoring and control system. She
delegates effectively, controls the schedule and budget, and completes the project on time. However, when the
final report is presented, she discovers that the result is not what was expected. Why? The manager didn’t ask
for a clear definition of the purpose at the onset.
As you can see in Figure 1-3, the definition component of a project is broken down into four segments and
control into five:
Figure 1-3 Defining and controlling the project.
Definition
1. Purpose. What is the expectation? Why is the project being undertaken, and what conclusions or
answers should it produce?
2. Tasks. How can a large project be broken down into a series of short-term progress steps?
Remember, although a big project may be overwhelming, smaller portions can be methodically
attacked and completed according to a schedule.
3. Schedule. What is the final deadline? And with that deadline in mind, how can a series of smaller
tasks be arranged, maintained, and scheduled? Proper scheduling of tasks on a week-to-week basis is
the key to meeting a long-term deadline.
4. Budget. How much should the project cost? Will the company have to invest money in research,
capital equipment, promotion, or market testing? What expenses should be planned for, and how much
money should be set aside to allow for successful completion?
Control
1. Team. As a project manager, you will need to gather the necessary team. You may have to borrow
resources from other departments, or use all or part of your own staff. But you can’t build the team until
you know the purpose, schedule, and budget for the project.
2. Coordination. By its very nature, a project demands consistent management. Committees don’t
work well if they’re overly democratic, so as project manager you must be responsible for coordinating
the efforts of everyone on the team.
3. Monitoring. Your schedule and budget will succeed only if you are able to spot emerging problems
and correct them; delegating work to others or creating a control system aren’t enough. You also need
to track the indicators that tell you whether the project is on schedule and within budget and if the
purpose is being achieved at each step along the way.
4. Action. If you find that problems are developing, you will need to take action to correct them. If
your team is falling behind schedule, you must accelerate the pace of work. If they’re exceeding
budget, costs and expenses must be brought under control and further variances eliminated or reduced.
This is possible only if you can follow up on discovered problems before they get out of hand.
5. Completion. Even if a project is well-managed and kept on schedule for 99 percent of the time
period, if that last step isn’t taken, the deadline won’t be met. Even well-run projects sometimes prove
difficult to close out. That final report, the last conclusion, the commitment to paper often prove to be
the hardest parts of the entire project.
Previous Table of Contents Next
11. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title THE SUCCESSFUL PROJECT MANAGER
A successful project manager knows how to bring together the definition and control elements and operate
them efficiently. That means you will need to apply the leadership skills you already apply in running a
department and practice the organizational abilities you need to constantly look to the future.
-----------
In other words, if you’re a qualified department manager, you already possess the skills and attributes for
succeeding as a project manager (see Figure 1-4). The criteria by which you will be selected will be similar.
Chances are, the project you’re assigned will have a direct relationship to the skills you need just to do your
job. For example:
• Organizational and leadership experience. An executive seeking a qualified project manager usually
seeks someone who has already demonstrated the ability to organize work and to lead others. He or she
assumes that you will succeed in a complicated long-term project primarily because you have already
demonstrated the required skills and experience.
• Contact with needed resources. For projects that involve a lot of coordination between departments,
divisions, or subsidiaries, top management will look for a project manager who already communicates
outside of a single department. If you have the contacts required for a project, it will naturally be
assumed that you are suited to run a project across departmental lines.
• Ability to coordinate a diverse resource pool. By itself, contact outside of your department may not
be enough. You must also be able to work with a variety of people and departments, even when their
backgrounds and disciplines are dissimilar. For example, as a capable project manager, you must be
able to delegate and monitor work not only in areas familiar to your own department but in areas that
are alien to your background.
Figure 1-4 Project manager qualifications.
• Communication and procedural skills. An effective project manager will be able to convey and
13. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title The methodical project manager knows the right questions to ask. At the time a project is assigned, your
checklist should include the seven questions (listed in Figure 1-5) that will lead to complete definition. These
are:
-----------
Figure 1-5 Checklist: questions to ask.
1. What is the purpose of this project? From the description of an assignment you may make a series of
assumptions about what the person making the assignment wants. But in fact, he or she might have
something completely different in mind. A large number of the communication problems you confront
involve definition.
Example: As manager of the accounting department, you are given the project of developing a
procedures manual for preparing budgets. At first, it seems obvious that the purpose is to define
expense budgeting. But with a little more discussion, you learn that the desired budget is intended not
for general expenses but for capital assets. The procedures will be much different based on this
definition.
2. What will the outcome look like? Be sure you know exactly what someone else expects to see at the
end of the project. If you’re given the role of designing a series of procedures for the company, does
that mean you will write an entire manual, or will you just provide guidelines for each department?
Will your project require a written report, and if so, how much detail should be included? Will you be
expected to make a presentation, and if so, in what format?
3. What problems will be encountered and solved? Always assume that a project will identify and
solve a series of specific problems. You can’t expect someone else to list all of the possible issues that
will come up; in fact, the project process may itself be designed to define the problems rather than to
overcome them.
Even when you suspect that a range of problems will be discovered beyong the initial discussion, a
15. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title CLASSIFYING THE PROJECT
How you approach, plan, and organize a project will depend on its nature. If the routines in your department
are, in fact, more like projects than recurring tasks, you can use the project management approach to
organizing many of the tasks you execute.
-----------
Example: A research department manager applies project management techniques for every assignment,
altering the recurring task to suit the complexity and scope of research to be performed.
Example: The production editor in a publishing company plans the editing, design, and printing of each book
based on publication deadline, delivery time, length of the manuscript, and budget.
Example: A construction company estimator organizes each project bid based on the type of job and
approximate complexity of the task.
While the steps involved in defining, controlling, and finalizing a project may be the same, the degree of
effort will vary depending on the project. Compare the different emphases for these projects:
Test Marketing a New Project: The method of market testing may be well
understood, so the project emphasis will be in two
areas: (1) selecting a representative test region and (2)
evaluating results accurately.
Installing a New Automated System: Here, the definition phase is all-important. You may
need to determine exactly what automation
requirements each phase of operations needs; in some
instances, the project itself will be designed just to
identify those routines that should be automated.
Changing Departmental Procedures: You might have flexibility in the deadline, especially
if you originate the project on your own. However, a
specific deadline should still be imposed so that your
project team completes its work within a finite time
frame.
Projects, whether part of the usual work in your department or assigned as one-time jobs, can be classified and
17. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title
Chapter 2
Creating the Plan
----------- You read a book from the beginning to the end. You run a business in the opposite way. You start
with the end, and then you do everything you must to reach it.
—Harold Geneen
“Planning is the key,” the project manager explained to her assistant as their lunch came to an
end. “I invited you here today to emphasize that point. As part of this team, I expect you to
understand the importance of planning ahead.”
She stopped as the waiter approached, and accepted the tab. She looked at the total for a
moment, and then quietly asked her assistant, “Can you lend me twenty dollars?”
All successful projects begin with a clear definition of the end result. That is, you need to identify the purpose
and structure of the job, what it will look like upon completion, the problems that will be solved, and the
objectives you’ll meet as project manager. So before you actually start work on any project, be sure that these
questions are answered:
1. Exactly what objectives am I expected to meet? Has the project been defined well enough so that
you know what the assignment is? By identifying objectives, you can better define the end result.
2. Who is the project for? Another way to define the end result is by making sure you know who will
use the project results, and for what purpose.
3. What problems will be solved by the end result? Coming up with a new procedure or new
information may be the tangible result of the project; but to make that end result worthwhile, you will
need to know what current or past problems should be solved by the efforts put into your project.
This chapter explains the methods for defining your project task: building your resource network, the purpose
of the first project meeting, setting objectives, coming up with an initial schedule, and identifying the key
elements of information, budgets, and team commitment.
SETTING LEADERSHIP GOALS
18. After you come up with a clear definition, schedule, and budget for your project, you need to plan for the way
in which you’ll lead your project team. Because projects are often seen by team members as intrusions into
their routines—extra work that’s imposed on them—you may have to contend with resistance within the
team, or at least help team members resolve scheduling conflicts.
To make a project work smoothly, you may have to alter your leadership style. You should also clearly define
your function and the function of the team.
Some suggestions are listed in Figure 2-1 and explained as follows:
1. Clarify your leadership role. A department manager may gain the respect of his or her department
staff over time, regardless of individual style. But a project manager, like each person on the team, is
often thrust into a temporary leadership role, often over individuals from other departments. In this
situation, it’s important to let your project team know how you perceive that role.
Your function will vary depending on the complexity of each project and on the size and nature of the
team. But for most projects, you will function not as a supervisor or mediator but as a coordinator. You
may often have to participate directly in many phases of the job to make sure that resources work
together, budgets are controlled, and schedules are met.
Figure 2-1 Project leadership goals.
2. Follow through on all aspects of the job. Remember that because projects are exceptions, team
members may not understand their roles as clearly as you’d like or might assume. So you must be able
to follow through on assignments and make sure they’re clearly understood in terms of the desired
result and deadline—a level of follow-through greater than you’d need in supervising a seasoned
department. A good method is to approach assignments and supervision as though you were training
new employees—at the same time not becoming so involved in overseeing that the team members feel
like trainees.
3. Emphasize organization and scheduling. Project leaders depend on a very well organized schedule
of work and division of assignments. Therefore, it’s important to write everything down. Use checklists
to make sure that work is proceeding on schedule and that everyone knows what’s expected of them
and when completion is due. You may want to work from a clipboard and solve problems as they come
up, even to the point that you don’t get directly involved in the work itself.
4. Be aware of team priorities and conflicts. Rarely do project team members abandon their own
recurring tasks to spend all of their time on temporary projects. Your project is more likely to represent
extra duty; some team members may even consider it a low priority. They are likely to face conflicts in
deadlines, since departmental tasks and project tasks cannot both be completed within a limited amount
of time. This problem is especially difficult to resolve when team members report to you for the project
and to someone else the rest of the time.
Therefore, ask team members to let you know in advance about future scheduling conflicts, and then
seek a solution—if necessary, by reassigning tasks. To avoid unnecessary conflicts that place team
members in the middle, stay in touch with the managers of their departments.
5. Be available to team members. Just as your team members must continue to execute departmental
tasks, you will have to continue leading your department. But no matter how much pressure you’re
under, and no matter how much work you have, you should be available to your team. When they
approach you with problems or questions, be sure you make time to work out a solution.
6. Ask for participation and respond to it. A team functions more democratically than a department;
otherwise it isn’t really a team. Ask your team to offer ideas, propose solutions and procedures, and
take part in executing the project’s objective. Most of all, make their participation a reality, not just a
concept. You need to listen well when members offer ideas; when the ideas make sense, be willing to
change your assumptions.
20. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title BUILDING YOUR RESOURCE NETWORK
Project managers organize and plan by identifying and then building a network. This network consists of
people from their departments, other departments, and, in some instances, outside of the company.
----------- Example: A sales department manager was assigned the project of developing procedures for salespeople, to
ensure follow-through with customers. Salespeople were not delivering orders correctly or supplying
important information needed to fulfill their orders. The manager was told to come up with a sales manual, as
well as newly designed order forms, and to ensure that the fulfillment department would be able to deliver
what the customers wanted.
The project manager made a list of the people who would be needed to fulfill his objective. They included:
• Salespeople, who were familiar with the order completion process and who knew the kinds of
problems that had come up in the past. Their participation would help in the design of practical
procedures and forms that could be put into use and that would also resolve the problems that were
creating poor fulfillment.
• The manager of the fulfillment department, who was aware of the same problems, but from a
different point of view. He would be able to list the information needed to do his job and suggest how it
should be arranged on a form. He would also be able to recommend follow-up procedures.
• An employee in the customer service department, who had recently completed a report summarizing
the types of complaints received from customers. This employee was aware of the types of errors
customers reported, which mainly had to do with delays, shipment of the wrong products, and
incomplete orders.
• An outside resource, for designing, typesetting, and printing forms.
In addition, the project manager assigned two employees from his department to help with the task of
compiling information from others and designing preliminary forms, writing new procedures, and following
up on approval and suggestions from other departments. One of the most important functions of this project
was to come up with one form and one procedure that would satisfy the requirements of both the salespeople
and the fulfillment department.
Having the right people on your project team is essential, whether they play an active role or an advisory one.
You can often coordinate and execute a project by combining a fairly small team with an extensive advisory
22. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title THE PROJECT ANNOUNCEMENT MEETING
Getting your project off to a healthy, well-defined start depends on your approach: how you lead, how you
seek definition, and the initial organization of the team, schedule, and budget. But it’s also necessary to
communicate your purpose and approach to your team. Thus, a project announcement meeting is essential.
-----------
Do you really need an announcement meeting? It may be possible to set the tone and define your purpose
without gathering people together; but a preliminary meeting can save a lot of time and effort later, and can
help avoid misunderstandings about authority levels and the nature of the assignment.
Example: An accounting manager was assigned the project of setting priorities for automation. The task
included interviewing the heads of each department and recommending routines that should be given priority.
But the department managers were not advised of the project. The accountant found these managers to be
defensive and suspicious; they weren’t sure whose idea the project was, the accountant’s or top
management’s. A great deal of effort went into explanation, and the project proved difficult to complete.
This project could have been executed more efficiently if an initial meeting had been called. The accountant
and each department manager should have been invited, as well as the executive who made the assignment.
If an announcement meeting is not called at the time a project is assigned to you, recommend calling one. The
executive should briefly explain the purpose and objective of the task and clearly identify you as the project
manager. Once everyone understands what you’ll be doing, it will be easier for you to organize your project
team and contact the resources you’ll need. Most of all, a brief meeting will help avoid your having to explain
what you’re doing and why, or having to deal tactfully with other managers who have not been informed
about your project.
Support your recommendation for the announcement meeting with these points:
1. Announcing a new project defines it for everyone involved, and clarifies the intended purpose. If the
meeting is not held, definition will be a problem each time you have to contact a resource.
2. The meeting helps ensure success, because everyone gets the message at the same time and from the
same authoritative source. Your ability to lead the project team is aided when the project is launched
from the top.
3. A demonstration of executive support for the project manager helps the team to achieve its goals.
23. However, it’s important to let others in on the decision when they or employees reporting to them will
also be affected, either as a team member or as a resource for the team.
If you have identified your project team by the time the announcement meeting takes place, each member
should be invited along with individual managers or supervisors of their departments. Introducing the project
to everyone—team members and their supervisors—makes your job of working with other departments much
easier.
There’s a significant difference between trying to achieve a project task that conflicts with departmental goals
and working with other managers to resolve problems. Inviting the managers to the initial project meeting
makes them feel included in the process. That sets a positive tone and helps you to function as project
manager. The alternative is having to continually struggle with a manager who was left out of the
decision-making process at the beginning.
SETTING PROJECT OBJECTIVES
Once your project is launched, how do you get the team working together? It won’t be enough to explain what
the project will achieve and begin handing out assigments. Your team should be oriented with as much
information as possible. And their participation should be encouraged from the beginning.
After the announcement meeting, plan your first team meeting. But remember, meetings should be limited in
frequency and time. You can’t get anything done if you and your team spend all of your time meeting and
discussing the project. After the initial team meeting, plan to get together only a few more times—to review
progress, resolve any special problems that have come up, and ensure that the schedule and budget are on
track.
The initial team meeting should be designed to help team members identify their contribution to the task. Try
these ideas shown in Figure 2-4 to help your team:
1. List the problems the team will solve. Start with your own list, then ask members to add any other
problems they’re aware of. Different points of view will help you define the objectives of the project
and will increase the value of the final result.
2. Offer solutions the team should achieve. List solutions to each of the problems you’ve listed, then
ask the team to offer alternative ideas. At this point in the plan, you will want to define the team’s
approach as thoroughly as possible so that no one is left out of the process.
Figure 2-4 Agenda: initial project meeting.
3. Describe information the team will need. Write out the information as well as the sources for
research, historical facts, and financial data you will need. Then ask the team to suggest other methods
for improving on the process or to identify resources for the raw data you’ll need.
4. Propose initial assignments. Identify task areas and suggest which team members you think are
best-suited to take responsibility for them. But don’t finalize anything at this point. Remember, this is
an intitial planning and brainstorming meeting. Let team members define their own roles as much as
possible. If people sense that they are involved in deciding how the project will proceed, they will be
more participative as a group.
5. Plan the entire project in advance. Establish a preliminary division of responsibility. This gives the
team an idea of the scope of the entire job. Later, when you put together your schedule and budget, you
may want to modify this initial decision in consultation with the team, in consideration of any schedule
conflicts, and to ensure a fair division of work load.
Previous Table of Contents Next
25. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title THE INITIAL SCHEDULE
Besides establishing a preliminary division of responsibilities, start your project by coming up with a schedule
for completion (see Figure 2-5)—not only of the entire project, but of each phase. Begin with two dates: the
start date and the completion date. In between, you need to identify logical phases (including responsibilites
----------- among your team) and a realistic deadline for each.
Some phases may overlap. When two or more team members are working independently, it will not always be
necessary for one group to wait for the other. Overlapping of phases adds a lot of flexibility to a schedule that
otherwise would leave little room for delayed completion.
Your initial schedule should include the following deadlines:
• Definition of purpose and identification of specific task responsibilities, scheduling, and budget
• Identification of phases
• Review of completed phases
• Completion (e.g., preparation of reports, final versions of documentation, forms, and other results of
the project)
Figure 2-5 Initial schedule.
This first step must be preliminary, and as project leader, you need to maintain a degree of flexibility. As your
team begins to understand the scope of the project they will be in a better position to define the best level of
participation, to share scheduling and phasing ideas with you, and to coordinate your project needs according
26. to their own departmental time constraints and deadlines.
Once your team has been exposed to the scope of the project, you will be responsible for developing a final
listing of phase and task assignments, developing the actual project schedule, identifying information sources
and types, and coming up with a budget. These requirements will be more complete if you first give the team
the opportunity to make suggestions and propose alternative processes.
IDENTIFYING KEY ELEMENTS
If you start your project with an announcement meeting and follow that by holding an initial project team
meeting, you should have a fairly well defined task ahead of you. Now you need to identify the elements that
will allow you to achieve clearly stated project goals. These include information, a budget, and details of
project team commitments.
Information
The first element is information resources. Raw data or other reports may have to be gathered from other
departments or outside sources; if this information doesn’t already exist or is not available to you and your
team members, you may need to research and develop data of your own.
Analyze information needs by answering these questions:
1. What sources can supply available information, and what information must be developed by the
project team? If information already exists, identify and make use of it. There’s no point in duplicating
what someone else has already done.
2. How will we verify information? Be aware that someone else’s information may be out of date,
inaccurate, or subject to misinterpretation. If your conclusions will be based on information supplied by
someone else, plan to verify it.
3. How much time will it take to get information from an outside source? Be sure to include enough
time in your schedule for an outside source to gather and send information to you.
4. How much time will it take to study or arrange the information we receive or develop? Translating
raw data into meaningful information may represent a major time commitment; that too must be built
into your project schedule.
Budget
Your project budget should be planned with staffing and information sources in mind. Will you need to
purchase or lease equipment? Pay for outside information? Travel? Have you allowed for the expense of
developing and printing the final report? If you will have to include illustrative material such as forms, charts
or graphs, flowcharts, or training aids, budget for the costs of design and drafting.
You will achieve maximum control by preparing a budget on a phase-by-phase basis. In that way, you will be
able to monitor actual versus budget as the project proceeds. Without this added feature, you cannot control
overall expenses of the project or quickly identify areas where overruns are occurring.
Also plan for the method of review. Will you break down each phase and prepare a report comparing actual to
budget? Will you delegate budget review? And what steps will you, as project manager, take to reverse
negative trends discovered in the review process?
Team Commitment
The degree of motivation among your team members will determine how well the entire project proceeds. By
leadership example you can maintain a sense of participation and commitment. But be aware of these factors:
• Day-to-day commitments. Team members must be able to continue with their ongoing departmental
responsibilities as well as respond to project demands.
• Priorities. If team members think of projects as impositions on their schedules, it will be very
difficult to inspire and lead them. Preliminary planning, responsibility assignments, and participative
style you encourage can help alleviate this problem.
• Coordination. If you are able to demonstrate through organizational ability and preplanning that you
can help team members work well together, they will be more likely to respond positively. But if they
feel that the process is poorly defined, the objectives are not spelled out, or that procedures are
inefficient, you cannot expect a coordinated effort.
28. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title
Chapter 3
Choosing the Project Team
----------- The hammers must be swung in cadence, when more than one is hammering the iron.
—Giordano Bruno
“I don’t think I’m going to have a good time working on this project,” an employee told a friend.
“We just finished up our first meeting, and the manager talked the whole time about teamwork.”
“Then why are you so worried?” the friend asked.
“It wasn’t what he said that bothered me so much,” the first one answered, “but those steel
marbles he kept playing with the whole time.”
The people on a team ultimately determine whether or not a project succeeds. Whether a troop of boy scouts
or the crew of an aircraft carrier, everyone on the team has to be able to agree on goals before they can work
together.
The larger your team and the greater its diversity, the more complicated your task as project managers. A
team with only two members—one leader and one follower—involves a singular line of communication. But
when a team consists of people from many departments, chances increase that conflicts in goals,
communication, and motives will arise to complicate your life.
THE IMPOSED TEAM PROBLEM
As the theory goes, a project manager is selected for a job and then allowed to gather a team of his or her own
choosing. But in practice, teams are often chosen without consulting the manager.
You may find out you already have a team when you receive your assignment. Perhaps the executive giving
you the job assumes that the team should be chosen by someone at his or her level. The motive may be a
worthwhile one. For example, since team members are usually drawn from a number of departments, the vice
president giving you the job may believe it will be easier for you to get cooperation from other managers
when all assignments come from the top. But an imposed team poses a number of problems for you as project
29. manager.
If you are given an assignment and team members, without the opportunity to become involved in the
selection, you are starting out at a clear disadvantage. Unfortunately, you might find yourself in this situation
for one or more projects. For example, when a vice president names you as leader and assigns several people
from a number of departments to work with you, there is no guarantee that the team will be the right one for
the job or that the team members’ managers will be pleased with the decision.
In some cases, a team is composed, not of the most capable people in the organization, but of the most
available. Employees whose work is highly valued may be so much in demand that they simply aren’t
available, to you or to anyone else except their department manager. So by elimination, the imposed team
could consist of the least capable people or of those who have not yet proved valuable as team players.
To solve the problems of having a team imposed on you, consider the idea shown in Figure 3-1 and explained
here:
1. Suggest a different approach. Simply complaining about the way project teams are put together in
your organization may not lead to a better idea. It’s much more effective to offer a solution that makes
sense to top management. If they recognize the value of allowing project managers to choose their own
teams, they will be more likely to allow you to take part in team selection.
Figure 3-1 Guidelines: imposed teams.
2. Do your best with what you are given. Even after suggeting a more sensible approach, you may still
end up with an imposed team. But you still have the assignment. Do your best to achieve your project
goals, even if your team is incomplete. You may later be able to make your best argument to
management based on a track record of past projects; it will be better for all concerned if you are able
to complete a project to expectations, even with a team you did not choose.
3. Give team members the chance to excel. Just because a team is imposed does not always mean its
members are incapable of performing well. Give each team member the chance to do his or her best
work; you may be very pleased with the results. In some cases, an employee whose performance has
been substandard or untried may be waiting for the opportunity you can offer through the project.
4. Request team members who work out well. Learn from your own experience. If a team member has
already performed well on one of your projects, request him or her for your current project. Even if
your boss doesn’t go along with the idea of allowing you to pick your own team, you still may be able
to influence the team selection somewhat by stating your preferences.
5. Ask to take part in the selection process. You may not have the absolute right to choose your own
team, but you can ask to be at least involved in making the selection. Since you are the one who will be
expected to complete the project successfully, you should make this point: The team itself is critical to
the project; therefore, you, as project manager, should be included in the selection process.
6. Suggest that department managers be involved as well. There are other managers who should be
brought in and consulted when a team is selected: the managers of each team member’s department.
You can make a number of good arguments for this idea: First, the managers will have to get by with
less help for the amount of time you’ll need to use their employees; second, they are in the best position
to know who is qualified to help you with your project; third, involving them at the start paves the way
for a better working relationship between you and them. If each manager is consulted beforehand, even
only as a courtesy, your job will be that much easier.
In a more enlightened business environment, management will give you a project assignment and then ask
you to put together a team. But you may still have certain restricitons. For example, you probably won’t be
allowed to recruit anyone you want from any department. It’s more likely that you will be free to use people
from your own department and also to request help from others—but subject to approval both from the top
and from the managers of the other departments.
Previous Table of Contents Next
31. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title THE COMMITMENT PROBLEM
Even when a clear schedule is prepared and carefully controlled, a budget is monitored and used to avoid
overspending, and precise project goals are defined, a project may still lack an organized structure.
----------- Some people feel only that a certain number of bodies are needed to execute the tasks necessary to complete
the job. According to this theory, it doesn’t really matter who the people are. It only matters that they are able
to follow orders and have the time to give to the project. This theory is based on the idea that time and labor
are absolute and that individual skills are of secondary importance.
The problem, though, is that some randomly selected team members, even if directly involved in the work
connected to your project, may not belong on your team for one or more of the following reasons:
• They don’t work well with you.
• They don’t work well with the rest of your team.
• They don’t have the time to commit to your project.
• Their department managers don’t want to give up their labor for the time you’ll need.
• They have no commitment to the project or to its goals.
These issues should be addressed at the time the suggestion is made to include someone on your team.
Otherwise, they will become only too apparent once the project is launched and problems begin to surface.
Your ideal team member should be committed to the project and able to put in the time and the energy to
make it succeed. Commitment is not limited to having the hours available. A valuable team member
understands the desired end result and is willing to work with you to make it happen. If that commitment isn’t
there, you will be struggling with the individual throughout the time you’re involved with the project.
A team member who is told to take part in your project may sense that it is your chance to succeed, not the
team member’s. Thus, he or she may have no actual commitment, or even a reason to make one. If the
assignment is truly temporary, what is the team member’s motivation for making it work?
You may run into this problem more than once. If your team members believe they are anonymous bodies,
thrown together to help you succeed without recognition for their work, they won’t be committed to the job.
And because the project will be viewed as temporary extra work, they can’t see how it will help their careers.
32. These are not just negative attitudes. They’re very human. Why should people work hard to make a project
succeed when their perception is that it’s for someone else’s benefit and that someone else will receive
recognition for their work?
Therefore, you need to identify the specific features that will give your team members the personal interest
and motivation to focus their energy on the project. A team is created not by assigning someone a job but by
action and opportunity. Action goes beyond stating that a team exists and expecting it to be true; you need to
give the team a chance to act like a team. And that means giving individuals the chance to take charge of their
parts in the project. You must supervise, of course, but allow others to apply their skills and creativity. The
question you need to ask when pulling together a team is, “How can I inspire the individuals working on this
project so that they will want it to succeed?”
AREAS OF RESPONSIBILITY
Successful teams strike a balance between two conflicting attributes: individual initiative and group needs. On
the one hand, each individual wants to believe that he or she has an opportunity to make decisions—the
authority to apply his or her talents in coming up with solutions. On the other hand, the larger goal of the
project rules, and each individual must work with the others as a single team.
How can you achieve a compromise between the desire to satisfy an individual ego and the less personal team
priority? The answer is to identify areas of responsibility rather than merely pass out tasks.
Building a team is very difficult when you are the sole authority for assigning jobs to the bodies on your team.
An alternative is to break down the project and its phases into distinct assignment ranges and then give each
team member the responsibility for executing one or more of those ranges.
Example: A project manager in a marketing research company had always experienced difficulty in getting
team members to work together. So when a new project was assigned to produce a public survey, he took a
different approach. Instead of listing phases and then passing out tasks to team members, he began by
identifying experienced and dependable team members. He then matched responsibilities to each individual.
Every phase of the project was scheduled on the basis of responsibility ranges (with listings of tasks within
that range). Team members assigned a range were given great freedom to accomplish their particular roles in
each phase in terms of working with other team members, meeting deadlines, and solving problems in their
own way.
A critical point concerning this approach: As project manager, you must set boundaries on the range of tasks
and also ensure that there is a complete understanding of task goals. For example, a project team member who
is assigned the job of interpreting market test data will need you to tell him what tests to apply and to check
conclusions with you before simply incorporating them into the final report.
As project manager, you must stay in touch with the team, both to supervise when necessary and to be
available if problems do arise. But once the team, schedule, and budget have been completed, your primary
area of responsibility is to make sure the job gets done.
The area of responsibility approach is satisfying for the individuals on the team. It provides the incentive they
need to make their best effort. It also expresses your confidence in them, an action that often brings out
everyone’s best. When team members have a sense of direct control, they are most likely to provide you with
their best efforts.
Example: A company’s treasurer assigned a manager the project of completely revising the financial reports
issued for the company each month. He explained the shortcomings of the reports, and left it to the manager
to select a team, work with the data processing department, and achieve results. The final results were due in
six months.
Previous Table of Contents Next
34. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title The manager chose two people from her own department to work on the project. She also asked a
programmer from data processing to join her team. They met, discussed the project, and decided upon a
schedule and deadlines. Then the manager assigned her two employees specific responsibilities. One was
asked to design reports that would meet the treasurer’s criteria. The other was asked to define file
requirements and changes in input. The two were to meet periodically with the programmer to discuss
----------- program changes.
The manager’s area of responsibility was to ensure that each employee’s goals were being met and that each
phase was being completed on schedule. Using this method, she completed the project on time and to
everyone’s satisfaction.
In this case, the project manager had been given the freedom to organize the project as she chose. She passed
along this approach by selecting the right team members and then giving them areas of responsibility—and
the freedom to perform their tasks. The project manager was very involved, but only to the extent needed by
the team members to do their jobs. In a sense, she coordinated a series of smaller projects between her team
members—passing along the trust and confidence the treasurer had given her.
ESTIMATING TIME REQUIREMENTS
Project managers often run into problems because they try to assign tasks rather than areas of responsibility.
In the belief that a highly structured, organized form of management is the only key to project success, they
may overlook the need of team members to be given a share of the job, instead of just being told what to do.
Scheduling and the giving out of assignments cannot be separated from one another. They are part of the same
process of defining areas of responsibility. The person who is given responsibility for a range of duties may
be told what to do; or he or she can be given the defined end result and then left alone to achieve it.
You might give a team member the actual responsibility for one complete phase of a project. But it’s more
likely that you will coordinate the phase, while identifying the functions he or she will fulfill. The method you
use to estimate time requirements will also define how completely you allow each team member to execute
his or her part of the job.
Example: One project manager broke down each phase according to the tasks involved. She then met with
her team and passed out the schedule, commenting, “This is your list of tasks. You have one week to
36. Little Black Book of Project Management, The
by Michael C. Thomsett
AMACOM Books
ISBN: 0814477321 Pub Date: 01/01/90
Search Tips
Search this book:
Advanced Search
Previous Table of Contents Next
Title The purpose of your meeting is to resolve conflicts so that they won’t recur. Make your position clear: You
are meeting because you respect the work of the department, you understand the priority of work, and you
want to help. Communicating your desire to work with the manager and not against the goals of his or her
department will enlist much more cooperation.
----------- Example: One project manager was under a great deal of pressure to complete the last phase of a project. He
was already behind schedule, and his boss was applying pressure to finish it up. But two of his team members
could not complete essential tasks due to deadlines within their own departments. The project manager tried
to explain his deadline problems to their department manager, and insisted that the team members be freed to
work on the project first—to no avail.
Example: Another project manager realized that it would be very difficult to complete her project on time
because of another department’s deadline. She met with the other manager and explained the problem.
Together, they came up with a solution that involved recruiting additional help from still another department
to relieve deadline pressure for two project team members.
THE EXECUTIVE POINT OF VIEW
You might be surprised to discover the point of view held by the person who assigned the project to you. In
some cases, executives are supportive; in others they are surprised that you can’t solve all problems on your
own. Some executives assume that a capable project manager never has to ask for help and that you are
competent enough to handle all problems without involving someone else.
Given the uncertain nature of some projects and the cultural status in many companies, such points of view
may be unrealistic. Nevertheless, some executives do prefer to assign a project and then walk away from
it—at least until the deadline. Therefore, you may have to learn how to get through your project without any
help from the top, even when you need and expect it.
You could approach an executive for assistance when you cannot resolve a scheduling conflict, when your
team is not capable of completing the task, when you need to expand the budget, or when another manager
refuses to cooperate with you. But don’t be surprised if you run into one or more of these points of view when
you ask for help:
• “It’s your project, and you have to solve your own problems.” The executive may not use these
words, but the message will be clear: “I trusted you with the assignment, and this is just one of the