This document describes how to install Oracle 10g RAC on Linux using NFS for shared storage. Key steps include:
1. Installing Oracle Enterprise Linux on two nodes and configuring networking and prerequisites.
2. Setting up NFS shares on one node for shared file systems and disks.
3. Installing the Oracle Clusterware software and configuring the two-node cluster.
Report
Share
Report
Share
1 of 38
Download to read offline
More Related Content
Rac on NFS
1. w 页码,1/38(W)
Ads by Google Oracle NFS Oracle Rac Oracle Server
Home Articles Scripts Forums Blog Certification Misc
Search About Printer Friendly
Oracle 8i | Oracle 9i | Oracle 10g | Oracle 11g | Oracle 12c | Miscellaneous | PL/SQL | SQL | Oracle
RAC | Oracle Apps | Linux
Home
»
Tweet
Articles
» 10g Search
» Here
Oracle 10g RAC On
Linux Using NFS
This article describes the installation of
Oracle 10g release 2 (10.2.0.1) RAC on
Linux (Oracle Enterprise Linux 4.5) using
NFS to provide the shared storage.
• Introduction
• Download Software
• Operating System Installation
• Oracle Installation Prerequisites
• Create Shared Disks
• Install the Clusterware Software
• Install the Database Software
• Create a Database using the DBCA
• TNS Configuration
• Check the Status of the RAC
• Direct and Asynchronous I/O
Introduction
NFS is an abbreviation of Network File System, a platform independent technology created by Sun
Microsystems that allows shared access to files stored on computers via an interface called the
Virtual File System (VFS) that runs on top of TCP/IP. Computers that share files are considered
NFS servers, while those that access shared files are considered NFS clients. An individual
computer can be either an NFS server, a NFS client or both.
We can use NFS to provide shared storage for a RAC installation. In a production environment we
would expect the NFS server to be a NAS, but for testing it can just as easily be another server, or
even one of the RAC nodes itself.
To cut costs, this articles uses one of the RAC nodes as the source of the shared storage.
Obviously, this means if that node goes down the whole database is lost, so it's not a sensible idea
to do this if you are testing high availability. If you have access to a NAS or a third server you can
easily use that for the shared storage, making the whole solution much more resilient. Whichever
route you take, the fundamentals of the installation are the same.
This article was inspired by the blog postings of Kevin Closson.
Download Software
Download the following software.
• Oracle Enterprise Linux
• Oracle 10g (10.2.0.1) CRS and DB software
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
2. w 页码,2/38(W)
Operating System Installation
This article uses Oracle Enterprise Linux 4.5, but it will work equally well on CentOS 4 or Red Hat
Enterprise Linux (RHEL) 4. A general pictorial guide to the operating system installation can be
found here. More specifically, it should be a server installation with a minimum of 2G swap, firewall
and secure Linux disabled and the following package groups installed:
• X Window System
• GNOME Desktop Environment
• Editors
• Graphical Internet
• Server Configuration Tools
• FTP Server
• Development Tools
• Legacy Software Development
• Administration Tools
• System Tools
To be consistent with the rest of the article, the following information should be set during the
installation.
RAC1.
• hostname: rac1.localdomain
• IP Address eth0: 192.168.2.101 (public address)
• Default Gateway eth0: 192.168.2.1 (public address)
• IP Address eth1: 192.168.0.101 (private address)
• Default Gateway eth1: none
RAC2.
• hostname: rac2.localdomain
• IP Address eth0: 192.168.2.102 (public address)
• Default Gateway eth0: 192.168.2.1 (public address)
• IP Address eth1: 192.168.0.102 (private address)
• Default Gateway eth1: none
You are free to change the IP addresses to suit your network, but remember to stay consistent with
those adjustments throughout the rest of the article.
Once the basic installation is complete, install the following packages whilst logged in as the root
user.
# From Oracle Enterprise Linux 4.5 Disk 1
cd /media/cdrecorder/CentOS/RPMS
rpm -Uvh setarch-1*
rpm -Uvh compat-libstdc++-33-3*
rpm -Uvh make-3*
rpm -Uvh glibc-2*
cd /
eject
# From Oracle Enterprise Linux 4.5 Disk 2
cd /media/cdrecorder/CentOS/RPMS
rpm -Uvh openmotif-2*
rpm -Uvh compat-db-4*
rpm -Uvh gcc-3*
cd /
eject
# From Oracle Enterprise Linux 4.5 Disk 3
cd /media/cdrecorder/CentOS/RPMS
rpm -Uvh libaio-0*
rpm -Uvh rsh-*
rpm -Uvh compat-gcc-32-3*
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
3. w 页码,3/38(W)
rpm -Uvh compat-gcc-32-c++-3*
rpm -Uvh openmotif21*
cd /
eject
Oracle Installation Prerequisites
Perform the following steps whilst logged into the RAC1 virtual machine as the root user.
The "/etc/hosts" file must contain the following information.
127.0.0.1 localhost.localdomain localhost
# Public
192.168.2.101 rac1.localdomain rac1
192.168.2.102 rac2.localdomain rac2
#Private
192.168.0.101 rac1-priv.localdomain rac1-priv
192.168.0.102 rac2-priv.localdomain rac2-priv
#Virtual
192.168.2.111 rac1-vip.localdomain rac1-vip
192.168.2.112 rac2-vip.localdomain rac2-vip
#NAS
192.168.2.101 nas1.localdomain nas1
Notice that the NAS1 entry is actually pointing to the RAC1 node. If you are using a real NAS or a
third server to provide your shared storage put the correct IP address into the file.
Add the following lines to the "/etc/sysctl.conf" file.
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
#fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
#net.core.rmem_default=262144
#net.core.rmem_max=262144
#net.core.wmem_default=262144
#net.core.wmem_max=262144
# Additional and amended parameters suggested by Kevin Closson
net.core.rmem_default = 524288
net.core.wmem_default = 524288
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.ipfrag_high_thresh=524288
net.ipv4.ipfrag_low_thresh=393216
net.ipv4.tcp_rmem=4096 524288 16777216
net.ipv4.tcp_wmem=4096 524288 16777216
net.ipv4.tcp_timestamps=0
net.ipv4.tcp_sack=0
net.ipv4.tcp_window_scaling=1
net.core.optmem_max=524287
net.core.netdev_max_backlog=2500
sunrpc.tcp_slot_table_entries=128
sunrpc.udp_slot_table_entries=128
net.ipv4.tcp_mem=16384 16384 16384
Run the following command to change the current kernel parameters.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
4. w 页码,4/38(W)
/sbin/sysctl -p
Add the following lines to the "/etc/security/limits.conf" file.
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536
Add the following line to the "/etc/pam.d/login" file, if it does not already exist.
session required pam_limits.so
Disable secure linux by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as
follows.
SELINUX=disabled
Alternatively, this alteration can be done using the GUI tool (Applications > System Settings >
Security Level). Click on the SELinux tab and disable the feature.
Set the hangcheck kernel module parameters by adding the following line to the
"/etc/modprobe.conf" file.
options hangcheck-timer hangcheck_tick=30 hangcheck_margin=180
To load the module immediately, execute "modprobe -v hangcheck-timer".
Create the new groups and users.
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
passwd oracle
During the installation, both RSH and RSH-Server were installed. Enable remote shell and rlogin by
doing the following.
chkconfig rsh on
chkconfig rlogin on
service xinetd reload
Create the "/etc/hosts.equiv" file as the root user.
touch /etc/hosts.equiv
chmod 600 /etc/hosts.equiv
chown root:root /etc/hosts.equiv
Edit the "/etc/hosts.equiv" file to include all the RAC nodes:
+rac1 oracle
+rac2 oracle
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
5. w 页码,5/38(W)
+rac1-priv oracle
+rac2-priv oracle
Login as the oracle user and add the following lines at the end of the ".bash_profile" file.
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=RAC1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export C
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
Remember to set the ORACLE_SID to RAC2 on the second node.
Create Shared Disks
First we need to set up some NFS shares. In this case we will do this on the RAC1 node, but you
can do the on a NAS or a third server if you have one available. On the RAC1 node create the
following directories.
mkdir /share1
mkdir /share2
Add the following lines to the "/etc/exports" file.
/share1 *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
/share2 *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
Run the following command to export the NFS shares.
chkconfig nfs on
service nfs restart
On both RAC1 and RAC2 create some mount points to mount the NFS shares to.
mkdir /u01
mkdir /u02
Add the following lines to the "/etc/fstab" file. The mount options are suggestions from Kevin
Closson.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
6. w 页码,6/38(W)
nas1:/share1 /u01 nfs rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,w
nas1:/share2 /u02 nfs rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,w
Mount the NFS shares on both servers.
mount /u01
mount /u02
Create the shared CRS Configuration and Voting Disk files.
touch /u01/crs_configuration
touch /u01/voting_disk
Create the directories in which the Oracle software will be installed.
mkdir -p /u01/crs/oracle/product/10.2.0/crs
mkdir -p /u01/app/oracle/product/10.2.0/db_1
mkdir -p /u01/oradata
chown -R oracle:oinstall /u01 /u02
Install the Clusterware Software
Place the clusterware and database software in the "/u02" directory and unzip it.
cd /u02
unzip 10201_clusterware_linux32.zip
unzip 10201_database_linux32.zip
Login to RAC1 as the oracle user and start the Oracle installer.
cd /u02/clusterware
./runInstaller
On the "Welcome" screen, click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
7. w 页码,7/38(W)
Accept the default inventory location by clicking the "Next" button.
Enter the appropriate name and path for the Oracle Home and click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
8. w 页码,8/38(W)
Wait while the prerequisite checks are done. If you have any failures correct them and retry the tests
before clicking the "Next" button.
The "Specify Cluster Configuration" screen shows only the RAC1 node in the cluster. Click the
"Add" button to continue.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
9. w 页码,9/38(W)
Enter the details for the RAC2 node and click the "OK" button.
Click the "Next" button to continue.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
10. w 页码,10/38(W)
The "Specific Network Interface Usage" screen defines how each network interface will be used.
Highlight the "eth0" interface and click the "Edit" button.
Set the "eht0" interface type to "Public" and click the "OK" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
11. w 页码,11/38(W)
Leave the "eth1" interface as private and click the "Next" button.
Click the "External Redundancy" option, enter "/u01/ocr_configuration" as the OCR Location and
click the "Next" button. To have greater redundancy we would need to define another shared disk
for an alternate location.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
12. w 页码,12/38(W)
Click the "External Redundancy" option, enter "/u01/voting_disk" as the Voting Disk Location and
click the "Next" button. To have greater redundancy we would need to define another shared disk
for an alternate location.
On the "Summary" screen, click the "Install" button to continue.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
13. w 页码,13/38(W)
Wait while the installation takes place.
Once the install is complete, run the orainstRoot.sh and root.sh scripts on both nodes as directed on
the following screen.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
14. w 页码,14/38(W)
The output from the orainstRoot.sh file should look something like that listed below.
# cd /u01/app/oracle/oraInventory
# ./orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
#
The output of the root.sh will vary a little depending on the node it is run on. The following text is the
output from the RAC1 node.
# cd /u01/crs/oracle/product/10.2.0/crs
# ./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /u01/voting_disk
Format of 1 voting devices complete.
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
15. w 页码,15/38(W)
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
rac1
CSS is inactive on these nodes.
rac2
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
#
Ignore the directory ownership warnings. We should really use a separate directory structure for the
clusterware so it can be owned by the root user, but it has little effect on the finished results.
The output from the RAC2 node is listed below.
# /u01/crs/oracle/product/10.2.0/crs
# ./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
rac1
rac2
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
16. w 页码,16/38(W)
The given interface(s), "eth0" is not public. Public interfaces should be use
#
Here you can see that some of the configuration steps are omitted as they were done by the first
node. In addition, the final part of the script ran the Virtual IP Configuration Assistant (VIPCA) in
silent mode, but it failed. This is because my public IP addresses are actually within the
"192.168.255.255" range which is a private IP range. If you were using "legal" IP addresses you
would not see this and you could ignore the following VIPCA steps.
Run the VIPCA manually as the root user on the RAC2 node using the following command.
# cd /u01/crs/oracle/product/10.2.0/crs/bin
# ./vipca
Click the "Next" button on the VIPCA welcome screen.
Highlight the "eth0" interface and click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
17. w 页码,17/38(W)
Enter the vitual IP alias and address for each node. Once you enter the first alias, the remaining
values should default automatically. Click the "Next" button to continue.
Accept the summary information by clicking the "Finish" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
18. w 页码,18/38(W)
Wait until the configuration is complete, then click the "OK" button.
Accept the VIPCA results by clicking the "Exit" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
19. w 页码,19/38(W)
You should now return to the "Execute Configuration Scripts" screen on RAC1 and click the "OK"
button.
Wait for the configuration assistants to complete.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
20. w 页码,20/38(W)
When the installation is complete, click the "Exit" button to leave the installer.
The clusterware installation is now complete.
Install the Database Software
Login to RAC1 as the oracle user and start the Oracle installer.
cd /u02/database
./runInstaller
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
21. w 页码,21/38(W)
On the "Welcome" screen, click the "Next" button.
Select the "Enterprise Edition" option and click the "Next" button.
Enter the name and path for the Oracle Home and click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
22. w 页码,22/38(W)
Select the "Cluster Install" option and make sure both RAC nodes are selected, the click the "Next"
button.
Wait while the prerequisite checks are done. If you have any failures correct them and retry the tests
before clicking the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
23. w 页码,23/38(W)
Select the "Install database Software only" option, then click the "Next" button.
On the "Summary" screen, click the "Install" button to continue.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
24. w 页码,24/38(W)
Wait while the database software installs.
Once the installation is complete, wait while the configuration assistants run.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
25. w 页码,25/38(W)
Execute the "root.sh" scripts on both nodes, as instructed on the "Execute Configuration scripts"
screen, then click the "OK" button.
When the installation is complete, click the "Exit" button to leave the installer.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
26. w 页码,26/38(W)
Create a Database using the DBCA
Login to RAC1 as the oracle user and start the Database Configuration Assistant.
dbca
On the "Welcome" screen, select the "Oracle Real Application Clusters database" option and click
the "Next" button.
Select the "Create a Database" option and click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
27. w 页码,27/38(W)
Highlight both RAC nodes and click the "Next" button.
Select the "Custom Database" option and click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
28. w 页码,28/38(W)
Enter the values "RAC.WORLD" and "RAC" for the Global Database Name and SID Prefix
respectively, then click the "Next" button.
Accept the management options by clicking the "Next" button. If you are attempting the installation
on a server with limited memory, you may prefer not to configure Enterprise Manager at this time.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
29. w 页码,29/38(W)
Enter database passwords then click the "Next" button.
Select the "Cluster File System" option, then click the "Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
30. w 页码,30/38(W)
Select the "Use Oracle-Managed Files" option and enter "/u01/oradata/" as the database location,
then click the "Next" button.
Check the "Specify Flash Recovery Area" option and accept the default location by clicking the
"Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
31. w 页码,31/38(W)
Uncheck all but the "Enterprise Manager Repository" option, then click the "Standard Database
Components..." button.
Uncheck all but the "Oracle JVM" option, then click the "OK" button, followed by the "Next" button on
the previous screen. If you are attempting the installation on a server with limited memory, you may
prefer not to install the JVM at this time.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
32. w 页码,32/38(W)
Accept the current database services configuration by clicking the "Next" button.
Select the "Custom" memory management option and accept the default settings by clicking the
"Next" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
33. w 页码,33/38(W)
Accept the database storage settings by clicking the "Next" button.
Accept the database creation options by clicking the "Finish" button.
Accept the summary information by clicking the "OK" button.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
34. w 页码,34/38(W)
Wait while the database is created.
Once the database creation is complete you are presented with the following screen. Make a note of
the information on the screen and click the "Exit" button.
The RAC database creation is now complete.
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
36. w 页码,36/38(W)
)
RAC1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip.lynx.co.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RAC.WORLD)
(INSTANCE_NAME = RAC1)
)
)
This configuration allows direct connections to specific instance, or using a load balanced
connection to the main service.
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Apr 18 12:27:11 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining option
SQL> CONN sys/password@rac1 AS SYSDBA
Connected.
SQL> SELECT instance_name, host_name FROM v$instance;
INSTANCE_NAME HOST_NAME
---------------- ------------------------------------------------------------
RAC1 rac1.localdomain
SQL> CONN sys/password@rac2 AS SYSDBA
Connected.
SQL> SELECT instance_name, host_name FROM v$instance;
INSTANCE_NAME HOST_NAME
---------------- ------------------------------------------------------------
RAC2 rac2.localdomain
SQL> CONN sys/password@rac AS SYSDBA
Connected.
SQL> SELECT instance_name, host_name FROM v$instance;
INSTANCE_NAME HOST_NAME
---------------- ------------------------------------------------------------
RAC1 rac1.localdomain
SQL>
Check the Status of the RAC
There are several ways to check the status of the RAC. The srvctl utility shows the current
configuration and status of the RAC database.
$ srvctl config database -d RAC
rac1 RAC1 /u01/app/oracle/product/10.2.0/db_1
rac2 RAC2 /u01/app/oracle/product/10.2.0/db_1
$
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
37. w 页码,37/38(W)
$ srvctl status database -d RAC
Instance RAC1 is running on node rac1
Instance RAC2 is running on node rac2
$
The V$ACTIVE_INSTANCES view can also display the current status of the instances.
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Apr 18 12:15:15 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining option
SQL> SELECT * FROM v$active_instances;
INST_NUMBER INST_NAME
----------- ------------------------------------------------------------
1 rac1.localdomain:RAC1
2 rac2.localdomain:RAC2
SQL>
Finally, the GV$ allow you to display global information for the whole RAC.
SQL> SELECT inst_id, username, sid, serial# FROM gv$session WHERE username IS
INST_ID USERNAME SID SERIAL#
---------- ------------------------------ ---------- ----------
1 SYS 127 2
1 SYS 128 28
1 SYS 130 10
1 SYS 131 4
1 SYS 133 9
1 DBSNMP 134 27
1 DBSNMP 135 1
1 SYS 153 122
2 SYSMAN 120 243
2 DBSNMP 122 37
2 DBSNMP 124 93
INST_ID USERNAME SID SERIAL#
---------- ------------------------------ ---------- ----------
2 SYSMAN 125 2
2 SYSMAN 127 6
2 SYS 128 26
2 SYS 129 30
2 SYS 130 3
2 SYS 133 149
2 SYSMAN 134 58
2 SYS 136 32
19 rows selected.
SQL>
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10
38. w 页码,38/38(W)
If you have configured Enterprise Manager, it can be used to view the configuration and current
status of the database.
Direct and Asynchronous I/O
Remember to use direct I/O and asynchronous I/O to improve performance. Direct I/O has been
supported over NFS for some time, but support for asynchronous I/O over NFS was only introduced
in RHEL 4 Update 3 (and its clones), so you need to use an up to date version of your Linux
distribution to take advantage of this feature.
You can get details about this Direct and Asynchronous I/O by following the link.
For more information see:
• Oracle 10g RAC On Linux Using VMware Server
• Oracle Database 10g Release 2 (10.2.0.1) RAC Installation On Windows 2003 Using
VMware Server
• Build Your Own Oracle RAC 10g Release 2 Cluster on Linux and FireWire
• Installation Guide for Linux x86 (10.2)
• Oracle Clusterware and Oracle Real Application Clusters Installation Guide for Linux (10.2)
• Direct and Asynchronous I/O
Hope this helps. Regards Tim...
Back to the Top.
Automated Assessments Full Analysis of your Datases and Apllications www.ateras.com/
Malaysia VPS Server 1GB RAM, 100GB HDD from RM 60/month RAID 10 Storage, Cloud Technology www.thegigabit.com
SAS Customer Intelligence SAS Can Help with Your CRM Needs. Get Analyst Report, Demo & More! www.SAS.com
SQL Database Query Tool Script, Edit, Execute, Explore Free. SQL Server, Sybase, DB2 www.sqldbx.com
32 comments, read/add them...
Tweet
Home | Articles | Scripts | Forums | Blog | Certification | Misc | Search | About
Copyright & Disclaimer
HTML CSS
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-linux-usin... 2012/5/10