Showing 1–34 of 34 results for author: Barker, C

Measurement of $J/ψ$ and $ψ\left(2S\right)$ production in $p+p$ and $p+d$ interactions at 120 GeV

Authors: C. H. Leung, K. Nagai, K. Nakano, D. Nawarathne, J. Dove, S. Prasad, N. Wuerfel, C. A. Aidala, J. Arrington, C. Ayuso, C. L. Barker, C. N. Brown, W. C. Chang, A. Chen, D. C. Christian, B. P. Dannowitz, M. Daugherity, L. El Fassi, D. F. Geesaman, R. Gilman, Y. Goto, R. Guo, T. J. Hague, R. J. Holt, M. F. Hossain , et al. (36 additional authors not shown)

Abstract: We report the $p+p$ and $p+d$ differential cross sections measured in the SeaQuest experiment for $J/ψ$ and $ψ\left(2S\right)$ production at 120 GeV beam energy covering the forward $x$-Feynman ($x_F$) range of $0.5 < x_F <0.9$. The measured cross sections are in good agreement with theoretical calculations based on the nonrelativistic QCD (NRQCD) using the long-distance matrix elements deduced fr… ▽ More We report the $p+p$ and $p+d$ differential cross sections measured in the SeaQuest experiment for $J/ψ$ and $ψ\left(2S\right)$ production at 120 GeV beam energy covering the forward $x$-Feynman ($x_F$) range of $0.5 < x_F <0.9$. The measured cross sections are in good agreement with theoretical calculations based on the nonrelativistic QCD (NRQCD) using the long-distance matrix elements deduced from a recent global analysis of proton- and pion-induced charmonium production data. The $σ_{ψ\left(2S\right)} / σ_{J/ψ}$ cross section ratios are found to increase as $x_F$ increases, indicating that the $q \bar{q}$ annihilation process has larger contributions in the $ψ\left(2S\right)$ production than the $J/ψ$ production. The $σ_{pd}/2σ_{pp}$ cross section ratios are observed to be significantly different for the Drell-Yan process and $J/ψ$ production, reflecting their different production mechanisms. We find that the $σ_{pd}/2σ_{pp}$ ratios for $J/ψ$ production at the forward $x_F$ region are sensitive to the $\bar{d}/ \bar{u}$ flavor asymmetry of the proton sea, analogous to the Drell-Yan process. The transverse momentum ($p_T$) distributions for $J/ψ$ and $ψ\left(2S\right)$ production are also presented and compared with data collected at higher center-of-mass energies. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 8 pages, 7 figures

Enhancing Fairness in Neural Networks Using FairVIC

Authors: Charmaine Barker, Daniel Bethell, Dimitar Kazakov

Abstract: Mitigating bias in automated decision-making systems, specifically deep learning models, is a critical challenge in achieving fairness. This complexity stems from factors such as nuanced definitions of fairness, unique biases in each dataset, and the trade-off between fairness and model accuracy. To address such issues, we introduce FairVIC, an innovative approach designed to enhance fairness in n… ▽ More Mitigating bias in automated decision-making systems, specifically deep learning models, is a critical challenge in achieving fairness. This complexity stems from factors such as nuanced definitions of fairness, unique biases in each dataset, and the trade-off between fairness and model accuracy. To address such issues, we introduce FairVIC, an innovative approach designed to enhance fairness in neural networks by addressing inherent biases at the training stage. FairVIC differs from traditional approaches that typically address biases at the data preprocessing stage. Instead, it integrates variance, invariance and covariance into the loss function to minimise the model's dependency on protected characteristics for making predictions, thus promoting fairness. Our experimentation and evaluation consists of training neural networks on three datasets known for their biases, comparing our results to state-of-the-art algorithms, evaluating on different sizes of model architectures, and carrying out sensitivity analysis to examine the fairness-accuracy trade-off. Through our implementation of FairVIC, we observed a significant improvement in fairness across all metrics tested, without compromising the model's accuracy to a detrimental extent. Our findings suggest that FairVIC presents a straightforward, out-of-the-box solution for the development of fairer deep learning models, thereby offering a generalisable solution applicable across many tasks and datasets. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Phase Coexistence and Transitions between Antiferromagnetic and Ferromagnetic States in a Synthetic Antiferromagnet

Authors: Christopher E. A. Barker, Kayla Fallon, Craig Barton, Eloi Haltz, Trevor P. Almeida, Sara Villa, Colin Kirkbride, Francesco Maccherozzi, Brice Sarpi, Sarnjeet S. Dhesi, Damien McGrouther, Stephen McVitie, Thomas A. Moore, Olga Kazakova, Christopher H. Marrows

Abstract: In synthetic antiferromagnets (SAFs) the combination of antiferromagnetic order and synthesis using conventional sputtering techniques is combined to produce systems that are advantageous for spintronics applications. Here we present the preparation and study of SAF multilayers possessing both perpendicular magnetic anisotropy and the Dzyaloshinskii-Moriya interaction. The multilayers have an anti… ▽ More In synthetic antiferromagnets (SAFs) the combination of antiferromagnetic order and synthesis using conventional sputtering techniques is combined to produce systems that are advantageous for spintronics applications. Here we present the preparation and study of SAF multilayers possessing both perpendicular magnetic anisotropy and the Dzyaloshinskii-Moriya interaction. The multilayers have an antiferromagnetically (AF) aligned ground state but can be forced into a full ferromagnetic (FM) alignment by applying an out-of-plane field $\sim 100$~mT. We study the spin textures in these multilayers in their ground state as well as around the transition point between the AF and FM states, at fields $\sim 40$~mT, by imaging the spin textures using complementary methods: photo-emission electron, magnetic force, and Lorentz transmission electron microscopies. The transformation into a FM state by field proceeds by a nucleation and growth process, where first skyrmionic nuclei form, which broaden into regions containing a FM-aligned labyrinth pattern that eventually occupies the whole film. This process remarkably occurs without any significant change in the net magnetic moment of the multilayer. The mix of AF- and FM-aligned regions on the micron scale in the middle of this transition is reminiscent of a first-order phase transition that exhibits phase coexistence. These results are important for guiding the design of spintronic devices using chiral magnetic textures made from SAFs. △ Less

Submitted 2 February, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Statics and Dynamics of Skyrmions in Balanced and Unbalanced Synthetic Antiferromagnets

Authors: Eloi Haltz, Christopher E. A. Barker, Christopher H. Marrows

Abstract: Synthetic antiferromagnets have great potential as skyrmion carriers in which new properties are expected for these spin textures, owing to changed magnetostatics and the absence of net topological charge. Here we numerically simulate the static and dynamic behaviour of skyrmions in these systems and clearly highlight the benefits compared to ferromagnetic single layers. In particular, our results… ▽ More Synthetic antiferromagnets have great potential as skyrmion carriers in which new properties are expected for these spin textures, owing to changed magnetostatics and the absence of net topological charge. Here we numerically simulate the static and dynamic behaviour of skyrmions in these systems and clearly highlight the benefits compared to ferromagnetic single layers. In particular, our results show a reduction of the skyrmion radius, an increase of their velocity under current, and a vanishing of their topological deflection. We also provide a robust and straightforward analytical model that captures the physics of such skyrmions. Finally, by extending the model to the case of an unbalanced SAF, we show some conditions for the system that optimise the properties of the skyrmion for potential spintronic devices. △ Less

Submitted 7 September, 2023; originally announced September 2023.

Revisiting the Electrified Pt(111)/Water Interfaces through an Affordable Double-Reference ab-initio Approach

Authors: Jack Jon Hinsch, Assil Bouzid, Jordan Clive Barker, Jessica Jein White, Fabien Mortier, Huijun Zhao, Yun Wang

Abstract: The electrified solid-liquid interface plays an essential role in many renewable energy-related applications, including hydrogen production and utilization. Limitations in computational modelling of the electrified solid-liquid interface have held back the understanding of its properties at the atomic-scale level. In this study, we applied the grand canonical density functional theory (GC-DFT) com… ▽ More The electrified solid-liquid interface plays an essential role in many renewable energy-related applications, including hydrogen production and utilization. Limitations in computational modelling of the electrified solid-liquid interface have held back the understanding of its properties at the atomic-scale level. In this study, we applied the grand canonical density functional theory (GC-DFT) combined with a hybrid implicit/explicit solvation model to reinvestigate the widely studied electrified platinum-water interface affordably. The calculated double layer capacitances of the Pt(111)-water interface over the applied bias potential closely match the experimental and previous theoretical data from expensive ab-initio molecular dynamics simulations. The structural analysis of the interface models reveals that the applied bias potential can significantly affect the Pt(111)-water atomic interface configurations. The orientation of the water molecules next to the Pt(111) surface is vital for correctly describing the potential of zero charge (PZC) and capacitance. Additionally, the GC-DFT results confirm that the absorption of the hydrogen atom under applied bias potential can significantly affect the electrified interfacial properties. The presented affordable GC-DFT approach, therefore, offers an efficient and accurate means to enhance the understanding of electrified solid-liquid interfaces. △ Less

Submitted 26 September, 2023; v1 submitted 23 July, 2023; originally announced July 2023.

Comments: 24 pages, 7 figures, supporting information, A published version is available

Report number: jp-2023-054257

Journal ref: J. Phys. Chem. C. (2023)

Identification of the Chromophores in Prussian blue

Authors: Li Musen, Robin Purchase, Parvin Safari, Martyna Judd, Emily C. Barker, Jeffrey R. Reimers, Nicholas Cox, Paul J. Low, Elmars Krausz

Abstract: Prussian blue was the world's first synthetic dye. Its structural, optical and magnetic properties have led to many applications in technology and medicine, and provide paradigms for understanding coordination polymers, framework materials and mixed-valence compounds. The intense red absorption of Prussian blue that characterises chemical and physical properties critical to many of these applicati… ▽ More Prussian blue was the world's first synthetic dye. Its structural, optical and magnetic properties have led to many applications in technology and medicine, and provide paradigms for understanding coordination polymers, framework materials and mixed-valence compounds. The intense red absorption of Prussian blue that characterises chemical and physical properties critical to many of these applications is now shown to arise from localised intervalence charge transfer transitions within two chromophoric variants (ligand isomers) of an idealised "dimer" fragment {(NC)5FeII}(mu-CN){FeIII(NC)3(H2O)2}. This fragment is only available in modern interpretations of the material's crystal structure, with the traditional motif {(NC)5FeII}(mu-CN){FeIII(NC)5} shown not to facilitate visible absorption. Essential to the analysis is the demonstration, obtained independently using absorption and magnetic circular dichroism spectroscopies, that spectra of Prussian blues are strongly influenced by particle size and (subsequent) light scattering. These interpretations are guided and supported by density functional theory calculations (CAM-B3LYP), supplemented by coupled cluster and Bethe-Salpeter spectral simulations, as well as electron paramagnetic resonance spectroscopy of Prussian blue and a model molecular dimeric ion [Fe2(CN)11]6-. △ Less

Submitted 7 July, 2023; originally announced July 2023.

ChatGPT as a Text Simplification Tool to Remove Bias

Authors: Charmaine Barker, Dimitar Kazakov

Abstract: The presence of specific linguistic signals particular to a certain sub-group of people can be picked up by language models during training. If the model begins to associate specific language with a distinct group, any decisions made based upon this language would hold a strong correlation to a decision based upon their protected characteristic, leading to possible discrimination. We explore a pot… ▽ More The presence of specific linguistic signals particular to a certain sub-group of people can be picked up by language models during training. If the model begins to associate specific language with a distinct group, any decisions made based upon this language would hold a strong correlation to a decision based upon their protected characteristic, leading to possible discrimination. We explore a potential technique for bias mitigation in the form of simplification of text. The driving force of this idea is that simplifying text should standardise language between different sub-groups to one way of speaking while keeping the same meaning. The experiment shows promising results as the classifier accuracy for predicting the sensitive attribute drops by up to 17% for the simplified data. △ Less

Submitted 1 June, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

Pragmatic Estimation of Sample Size for Number of Interviews for PRO development in the 2009 FDA PRO guidance

Authors: Chris Barker

Abstract: PROs developed de novo, using the FDA guidance may involve structured patient interviews or focus groups. Qualitative Research is a methodology for eliciting and coding interviews and produces concepts or themes. These concepts are used to develop items in a PRO for use as an endpoint in Clinical trials. A convention in the field is that interviews and code/concept elicitation are considered compl… ▽ More PROs developed de novo, using the FDA guidance may involve structured patient interviews or focus groups. Qualitative Research is a methodology for eliciting and coding interviews and produces concepts or themes. These concepts are used to develop items in a PRO for use as an endpoint in Clinical trials. A convention in the field is that interviews and code/concept elicitation are considered complete when subsequent interviews produces "no new concepts" -termed "saturation". FDA reviewers frequently challenge PRO developers whether there are sufficient patient interviews to confirm that saturation is achieved after occurrence of zero new concepts. Several authors have reported that concrete criteria are need for confirming that saturation is achieved (Francis 2010, Mason 2010, Marshall 2013). I provide statistical methodology for confirming saturation, suitable for review by a regulatory authority. Type I error for saturation, may occur if further interviews elicited more concepts after first occurrence of saturation. I use published data set on code elicitation (Guest, 2006) to demonstrate that saturation may occur more than once in a sequence of interviews. I provide a statistical definition for saturation in qualitative research, that addresses regulatory concerns for PRO's developed for use as a clinical trial endpoint in a regulatory submission. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 14 pages, 3 figures

Measurement of flavor asymmetry of light-quark sea in the proton with Drell-Yan dimuon production in $p+p$ and $p+d$ collisions at 120 GeV

Authors: J. Dove, B. Kerns, C. Leung, R. E. McClellan, S. Miyasaka, D. H. Morton, K. Nagai, S. Prasad, F. Sanftl, M. B. C. Scott, A. S. Tadepalli, C. A. Aidala, J. Arrington, C. Ayuso, C. T. Barker, C. N. Brown, T. H. Chang, W. C. Chang, A. Chen, D. C. Christian, B. P. Dannowitz, M. Daugherity, M. Diefenthaler, L. El Fassi, D. F. Geesaman , et al. (44 additional authors not shown)

Abstract: Evidence for a flavor asymmetry between the $\bar u$ and $\bar d$ quark distributions in the proton has been found in deep-inelastic scattering and Drell-Yan experiments. The pronounced dependence of this flavor asymmetry on $x$ (fraction of nucleon momentum carried by partons) observed in the Fermilab E866 Drell-Yan experiment suggested a drop of the $\bar d\left(x\right) / \bar u\left(x\right)$… ▽ More Evidence for a flavor asymmetry between the $\bar u$ and $\bar d$ quark distributions in the proton has been found in deep-inelastic scattering and Drell-Yan experiments. The pronounced dependence of this flavor asymmetry on $x$ (fraction of nucleon momentum carried by partons) observed in the Fermilab E866 Drell-Yan experiment suggested a drop of the $\bar d\left(x\right) / \bar u\left(x\right)$ ratio in the $x > 0.15$ region. We report results from the SeaQuest Fermilab E906 experiment with improved statistical precision for $\bar d\left(x\right) / \bar u\left(x\right)$ in the large $x$ region up to $x=0.45$ using the 120 GeV proton beam. Two different methods for extracting the Drell-Yan cross section ratios, $σ^{pd} /2 σ^{pp}$, from the SeaQuest data give consistent results. The $\bar{d}\left(x\right) / \bar{u}\left(x\right)$ ratios and the $\bar d\left(x\right) - \bar u\left(x\right)$ differences are deduced from these cross section ratios for $0.13 < x < 0.45$. The SeaQuest and E866/NuSea $\bar{d}\left(x\right) / \bar{u}\left(x\right)$ ratios are in good agreement for the $x\lesssim 0.25$ region. The new SeaQuest data, however, show that $\bar d\left(x\right)$ continues to be greater than $\bar u\left(x\right)$ up to the highest $x$ value ($x = 0.45$). The new results on $\bar{d}\left(x\right) / \bar{u}\left(x\right)$ and $\bar{d}\left(x\right) - \bar{u}\left(x\right)$ are compared with various parton distribution functions and theoretical calculations. △ Less

Submitted 2 October, 2023; v1 submitted 23 December, 2022; originally announced December 2022.

Domain wall motion at low current density in a synthetic antiferromagnet nanowire

Authors: Christopher Barker, Simone Finizio, Eloi Haltz, Sina Mayr, Philippa Shepley, Thomas Moore, Gavin Burnell, Jörg Raabe, Christopher Marrows

Abstract: The current-driven motion of magnetic domain walls (DWs) is the working principle of magnetic racetrack memories. In this type of spintronic technology, high current densities are used to propel DW motion in magnetic nanowires, causing significant wire heating. Synthetic antiferromagnets are known to show very fast DW motion at high current densities, but lower current densities around onset of mo… ▽ More The current-driven motion of magnetic domain walls (DWs) is the working principle of magnetic racetrack memories. In this type of spintronic technology, high current densities are used to propel DW motion in magnetic nanowires, causing significant wire heating. Synthetic antiferromagnets are known to show very fast DW motion at high current densities, but lower current densities around onset of motion have received less attention. Here we use scanning transmission x-ray microscopy to study the response of DWs in a SAF multilayer to currents. We observe that the DWs depin at $\sim 3 \times 10^{11}$~A/m$^2$ and move more quickly in response to 5~ns duration current pulses than in comparable conventional multilayers. The results suggest that DWs in SAF structures are superior to conventional Néel DWs for low energy consumption racetrack technologies. △ Less

Submitted 6 May, 2022; originally announced May 2022.

Refinements for Bragg coherent X-ray diffraction imaging: Electron backscatter diffraction alignment and strain field computation

Authors: David Yang, Mark T. Lapington, Guanze He, Kay Song, Minyi Zhang, Clara Barker, Ross J. Harder, Wonsuk Cha, Wenjun Liu, Nicholas W. Phillips, Felix Hofmann

Abstract: Bragg coherent X-ray diffraction imaging (BCDI) allows the three-dimensional (3D) measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D variation of the full lattice strain tensor within the microcrystal can be recovered. However, this requires knowledge of the crystal orientation, which is typi… ▽ More Bragg coherent X-ray diffraction imaging (BCDI) allows the three-dimensional (3D) measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D variation of the full lattice strain tensor within the microcrystal can be recovered. However, this requires knowledge of the crystal orientation, which is typically attained via estimates based on crystal geometry or synchrotron micro-beam Laue diffraction measurements. Here, we present an alternative method to determine the crystal orientation for BCDI measurements, by using electron backscatter diffraction (EBSD) to align Fe-Ni and Co-Fe alloy microcrystals on three different substrates. The orientation matrix is calculated from EBSD Euler angles and compared to the orientation determined using micro-beam Laue diffraction. The average angular mismatch between the orientation matrices is less than ~6 degrees, which is reasonable for the search for Bragg reflections. We demonstrate the use of an orientation matrix derived from EBSD to align and measure five reflections for a single Fe-Ni microcrystal using multi-reflection BCDI. Using this dataset, a refined strain field computation based on the gradient of the complex exponential of the phase is developed. This approach is shown to increase accuracy, especially in the presence of dislocations. Our results demonstrate the feasibility of using EBSD to pre-align BCDI samples and the application of more efficient approaches to determine the lattice strain tensor with greater accuracy. △ Less

Submitted 2 October, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 39 pages, 12 figures

Journal ref: J. Appl. Cryst. (2022). 55, 1184-119

Breathing Modes of Skyrmion Strings in a Synthetic Antiferromagnet

Authors: Christopher E. A. Barker, Eloi Haltz, Thomas A. Moore, Christopher H. Marrows

Abstract: Skyrmions are small topologically protected magnetic structures that hold promise for applications from data storage to neuromorphic computing and they have been shown to possess internal microwave frequency excitations. Skyrmions in a synthetic antiferromagnet have been predicted to be smaller and faster than their ferromagnetic equivalents, and also shown to possess more internal modes. In this… ▽ More Skyrmions are small topologically protected magnetic structures that hold promise for applications from data storage to neuromorphic computing and they have been shown to possess internal microwave frequency excitations. Skyrmions in a synthetic antiferromagnet have been predicted to be smaller and faster than their ferromagnetic equivalents, and also shown to possess more internal modes. In this work we consider the breathing modes of skyrmions in a four repetition synthetic antiferromagnetic multilayer by means of micromagnetic simulations and examine the further splitting of the modes into different arrangements of out-of-phase and in-phase modes. This results in a lowering of frequencies which is promising for skyrmion sensing applications in a synthetic antiferromagnet. △ Less

Submitted 2 February, 2023; v1 submitted 10 December, 2021; originally announced December 2021.

Comments: 6 pages, 4 figures

In situ Bragg coherent X-ray diffraction imaging of corrosion in a Co-Fe alloy microcrystal

Authors: David Yang, Nicholas W. Phillips, Kay Song, Clara Barker, Ross J. Harder, Wonsuk Cha, Wenjun Liu, Felix Hofmann

Abstract: Corrosion is a major concern for many industries, as corrosive environments can induce structural and morphological changes that lead to material dissolution and accelerate material failure. The progression of corrosion depends on nanoscale morphology, stress, and defects present. Experimentally monitoring this complex interplay is challenging. Here we implement in situ Bragg coherent X-ray diffra… ▽ More Corrosion is a major concern for many industries, as corrosive environments can induce structural and morphological changes that lead to material dissolution and accelerate material failure. The progression of corrosion depends on nanoscale morphology, stress, and defects present. Experimentally monitoring this complex interplay is challenging. Here we implement in situ Bragg coherent X-ray diffraction imaging (BCDI) to probe the dissolution of a Co-Fe alloy microcrystal exposed to hydrochloric acid (HCl). By measuring five Bragg reflections from a single isolated microcrystal at ambient conditions, we compare the full three-dimensional (3D) strain state before corrosion and the strain along the [111] direction throughout the corrosion process. We find that the strained surface layer of the crystal dissolves to leave a progressively less strained surface. Interestingly, the average strain closer to the centre of the crystal increases during the corrosion process. We determine the localised corrosion rate from BCDI data, revealing the preferential dissolution of facets more exposed to the acid stream, highlighting an experimental geometry effect. These results bring new perspectives to understanding the interplay between crystal strain, morphology, and corrosion; a prerequisite for the design of more corrosion-resistant materials. △ Less

Submitted 27 January, 2022; v1 submitted 15 November, 2021; originally announced November 2021.

Comments: 10 pages, 11 figures

The Asymmetry of Antimatter in the Proton

Authors: J. Dove, B. Kerns, R. E. McClellan, S. Miyasaka, D. H. Morton, K. Nagai, S. Prasad, F. Sanftl, M. B. C. Scott, A. S. Tadepalli, C. A. Aidala, J. Arrington, C. Ayuso, C. L. Barker, C. N. Brown, W. C. Chang, A. Chen, D. C. Christian, B. P. Dannowitz, M. Daugherity, M. Diefenthaler, L. El Fassi, D. F. Geesaman, R. Gilman, Y. Goto , et al. (42 additional authors not shown)

Abstract: The fundamental building blocks of the proton, quarks and gluons, have been known for decades. However, we still have an incomplete theoretical and experimental understanding of how these particles and their dynamics give rise to the quantum bound state of the proton and its physical properties, such as for example its spin. The two up and the single down quarks that comprise the proton in the sim… ▽ More The fundamental building blocks of the proton, quarks and gluons, have been known for decades. However, we still have an incomplete theoretical and experimental understanding of how these particles and their dynamics give rise to the quantum bound state of the proton and its physical properties, such as for example its spin. The two up and the single down quarks that comprise the proton in the simplest picture account only for a few percent of the proton mass, the bulk of which is in the form of quark kinetic and potential energy and gluon energy from the strong force. An essential feature of this force, as described by quantum chromodynamics, is its ability to create matter-antimatter quark pairs inside the proton that exist only for a very short time. Their fleeting existence makes the antimatter quarks within protons difficult to study, but their existence is discernible in reactions where a matter-antimatter quark pair annihilates. In this picture of quark-antiquark creation by the strong force, the probability distributions as a function of momentum for the presence of up and down antimatter quarks should be nearly identical, since their masses are quite similar and small compared to the mass of the proton. In the present manuscript, we show evidence from muon pair production measurements that these distributions are significantly different, with more abundant down antimatter quarks than up antimatter quarks over a wide range of momentum. These results revive interest in several proposed mechanisms as the origin of this antimatter asymmetry in the proton that had been disfavored by the previous results and point to the future measurements that can distinguish between these mechanisms. △ Less

Submitted 5 March, 2021; originally announced March 2021.

Comments: 10 pages, 5 figures, 5 tables; Matches published version

Report number: FERMILAB-PUB-21-073-E

Journal ref: Nature, 590, 561-565 (2021)

Understanding and Mitigating Plume Effects During Powered Descents on the Moon and Mars

Authors: Ryan N. Watkins, Philip T. Metzger, Manish Mehta, Daoru Han, Parvathy Prem, Laurent Sibille, Adrienne Dove, Bradley Jolliff, Daniel P. Moriarty III, Donald C. Barker, Ed Patrick, Matthew Kuhns, Michael Laine

Abstract: This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishe… ▽ More This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishes with five recommendations: to include dedicated descent imagers on every surface mission so that PSI can be directly recorded and reviewed by ground teams; as far as possible, to make all data related to PSI effects publicly accessible; to develop methods and instruments for making key measurements of PSI; to assess and record key flight data; and to invest funding into studies of long-term infrastructure architectures and mitigation techniques. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: 8 pages

Lunar Volatiles and Solar System Science

Authors: Parvathy Prem, Ákos Kereszturi, Ariel N. Deutsch, Charles A. Hibbitts, Carl A. Schmidt, Cesare Grava, Casey I. Honniball, Craig J. Hardgrove, Carlé M. Pieters, David B. Goldstein, Donald C. Barker, Debra H. Needham, Dana M. Hurley, Erwan Mazarico, Gerardo Dominguez, G. Wesley Patterson, Georgiana Y. Kramer, Julie Brisset, Jeffrey J. Gillis-Davis, Julie L. Mitchell, Jamey R. Szalay, Jasper S. Halekas, James T. Keane, James W. Head, Kathleen E. Mandt , et al. (16 additional authors not shown)

Abstract: Understanding the origin and evolution of the lunar volatile system is not only compelling lunar science, but also fundamental Solar System science. This white paper (submitted to the US National Academies' Decadal Survey in Planetary Science and Astrobiology 2023-2032) summarizes recent advances in our understanding of lunar volatiles, identifies outstanding questions for the next decade, and dis… ▽ More Understanding the origin and evolution of the lunar volatile system is not only compelling lunar science, but also fundamental Solar System science. This white paper (submitted to the US National Academies' Decadal Survey in Planetary Science and Astrobiology 2023-2032) summarizes recent advances in our understanding of lunar volatiles, identifies outstanding questions for the next decade, and discusses key steps required to address these questions. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Vertical mixing in oil spill modelling

Authors: Tor Nordam, Jørgen Skancke, Rodrigo Duran, Chris Barker

Abstract: The main focus of marine oil spill modelling is often on where the oil will end up, i.e., on the horizontal transport. However, due to current shear, wind drag, and the different physical, chemical and biological processes that affect oil differently on the surface and in the water column, modelling the vertical distribution of the oil is essential for modelling the horizontal transport. In this… ▽ More The main focus of marine oil spill modelling is often on where the oil will end up, i.e., on the horizontal transport. However, due to current shear, wind drag, and the different physical, chemical and biological processes that affect oil differently on the surface and in the water column, modelling the vertical distribution of the oil is essential for modelling the horizontal transport. In this work, we review and present models for a number of physical processes that influence the vertical transport of oil, including wave entrainment, droplet rise, vertical turbulent mixing, and surfacing. We aim to provide enough detail for the reader to be able to understand and implement the models, and to provide references to further reading. Mathematical and numerical details are included, particularly on the advection and diffusion of particles. We also present and discuss some common numerical pitfalls that may be a bit subtle, but which can cause significant errors. △ Less

Submitted 22 October, 2020; originally announced October 2020.

Comments: Book chapter, to be published by Elsevier

Horizontal transport in oil-spill modeling

Authors: Rodrigo Duran, Tor Nordam, Mattia Serra, Chris Barker

Abstract: Simulating oil transport in the ocean can be done successfully provided that accurate ocean currents and surface winds are available -- this is often too big of a challenge. Deficient ocean currents can sometimes be remediated by parameterizing missing physics -- this is often not enough. In this chapter, we focus on some of the main problems oil-spill modelers face, which is determining accurate… ▽ More Simulating oil transport in the ocean can be done successfully provided that accurate ocean currents and surface winds are available -- this is often too big of a challenge. Deficient ocean currents can sometimes be remediated by parameterizing missing physics -- this is often not enough. In this chapter, we focus on some of the main problems oil-spill modelers face, which is determining accurate trajectories when the velocity may be missing important physics, or when the velocity has localized errors that result in large trajectory errors. A foundation of physical mechanisms driving motion in the ocean may help identify currents lacking certain types of physics, and the remedy. Recent progress in our understanding of motion in the upper centimeters of the ocean supports unconventional parameterizations; we present as an example the 2003 Point Wells oil spill which had remained unexplained until recently. When the velocity realistically represents trajectory forcing mechanisms, advanced Lagrangian techniques that build on the theory of Lagrangian Coherent Structures can bypass localized velocity errors by identifying regions of attraction likely to dictate fluid deformation. The usefulness of Objective Eulerian Coherent Structures is demonstrated to the oil-spill modeling community by revisiting the 2010 Deepwater Horizon accident in the Gulf of Mexico and predicting a prominent transport pattern from an imperfect altimetry velocity eight days in advance. △ Less

Submitted 16 June, 2021; v1 submitted 27 September, 2020; originally announced September 2020.

Comments: Book chapter, final version to be published by Elsevier

MSC Class: 76F20

Measuring the Formation Energy Barrier of Skyrmions in Zinc Substituted Cu$_2$OSeO$_3$

Authors: M. N. Wilson, M. Crisanti, C. Barker, A. Štefančič, J. S. White, M. T. Birch, G. Balakrishnan, R. Cubitt, P. D. Hatton

Abstract: We report small angle neutron scattering (SANS) measurements of the skyrmion lattice in (Cu$_{0.976}$Zn$_{0.024}$)$_2$OSeO$_3$ under the application of an electric field. These measurements show an expansion of the skyrmion lattice stability region with electric field similar to that seen in pristine Cu$_2$OSeO$_3$. Furthermore, using time-resolved SANS, we observe the slow formation of skyrmions… ▽ More We report small angle neutron scattering (SANS) measurements of the skyrmion lattice in (Cu$_{0.976}$Zn$_{0.024}$)$_2$OSeO$_3$ under the application of an electric field. These measurements show an expansion of the skyrmion lattice stability region with electric field similar to that seen in pristine Cu$_2$OSeO$_3$. Furthermore, using time-resolved SANS, we observe the slow formation of skyrmions after an electric or magnetic field is applied, which has not been observed in pristine Cu$_2$OSeO$_3$ crystals. The measured formation times are dramatically longer than the corresponding skyrmion destruction times after the external field is removed, and increase exponentially from 100~s at 52.5~K to 10,000~s at 51.5~K. This thermally activated behaviour indicates an energy barrier for skyrmion formation of 1.57(2)~eV, the size of which demonstrates the huge cost for creating these complex chiral objects. △ Less

Submitted 27 March, 2019; v1 submitted 31 January, 2019; originally announced January 2019.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. B 99, 174421 (2019)

Shaking-induced crystallization of dense sphere packings

Authors: D. P. Shinde, Anita Mehta, G. C. Barker

Abstract: We use a hybrid Monte Carlo algorithm to simulate the shaking of spheres at different vibrational amplitudes, and find that spontaneous crystallisation occurs in specific dynamical regimes. Several crystallising transitions are typically observed, leading to end states which can be fully or partially ordered, depending on the shaking amplitude, which we investigate using metrics of global and loca… ▽ More We use a hybrid Monte Carlo algorithm to simulate the shaking of spheres at different vibrational amplitudes, and find that spontaneous crystallisation occurs in specific dynamical regimes. Several crystallising transitions are typically observed, leading to end states which can be fully or partially ordered, depending on the shaking amplitude, which we investigate using metrics of global and local order. At the lowest amplitudes, crystallisation is incomplete, at least for our times of observation. For amplitude ranges where crystallisation is complete, there is typically a competition between hexagonal close packed (hcp) or face-centered cubic (fcc) ordering. It is seen that fcc ordering typically predominates; in fact for an optimal range of amplitudes, spontaneous crystallisation into a pure fcc state is observed. An interesting feature is the breakdown of global order when there is juxtaposition of fully developed hcp and fcc order locally: we suggest that this is due to the interfaces between the different domains of order, which play the same role as dislocations. △ Less

Submitted 17 February, 2014; originally announced February 2014.

Comments: 7 pages, 11 figures, accepted in Phys. Rev. E

Journal ref: Phys. Rev. E 89, 022204 (2014)

Bridges in three-dimensional granular packings: experiments and simulations

Authors: Yixin Cao, Bandan Chakrabortty, G. C. Barker, Anita Mehta, Yujie Wang

Abstract: In this letter, we present the first experimental study of bridge structures in three-dimensional dry granular packings. When bridges are small, they are predominantly 'linear', and have an exponential size distribution. Larger, predominantly 'complex' bridges, are confirmed to follow a power-law size distribution. Our experiments, which use X-ray tomography, are in good agreement with the simulat… ▽ More In this letter, we present the first experimental study of bridge structures in three-dimensional dry granular packings. When bridges are small, they are predominantly 'linear', and have an exponential size distribution. Larger, predominantly 'complex' bridges, are confirmed to follow a power-law size distribution. Our experiments, which use X-ray tomography, are in good agreement with the simulations presented here, for the distribution of sizes, end-to-end lengths, base extensions and orientations of predominantly linear bridges. Quantitative differences between the present experiment and earlier simulations suggest that packing fraction is an important determinant of bridge structure. △ Less

Submitted 10 May, 2013; v1 submitted 14 December, 2011; originally announced December 2011.

Comments: 6 pages, 7 figures, accepted by EPL (2013)

Finding bridges in packings of colloidal spheres

Authors: Matthew C. Jenkins, Mark D. Haw, Gary C. Barker, Wilson C. K. Poon, Stefan U. Egelhaaf

Abstract: We identify putative load-bearing structures (bridges) in experimental colloidal systems studied by confocal microscopy. Bridges are co-operative structures that have been used to explain stability and inhomogeneous force transmission in simulated granular packings with a range of densities. We show that bridges similar to those found in granular simulations are present in real experimental colloi… ▽ More We identify putative load-bearing structures (bridges) in experimental colloidal systems studied by confocal microscopy. Bridges are co-operative structures that have been used to explain stability and inhomogeneous force transmission in simulated granular packings with a range of densities. We show that bridges similar to those found in granular simulations are present in real experimental colloidal packings. We describe critically the bridge-finding procedure for real experimental data and propose a new criterion-Lowest Mean Squared Separation (LSQS)-for selecting optimum stabilisations. △ Less

Submitted 17 June, 2010; originally announced June 2010.

Comments: 18 pages, 9 figures

Searches for gravitational waves from known pulsars with S5 LIGO data

Authors: The LIGO Scientific Collaboration, The Virgo Collaboration, B. P. Abbott, R. Abbott, F. Acernese, R. Adhikari, P. Ajith, B. Allen, G. Allen, M. Alshourbagy, R. S. Amin, S. B. Anderson, W. G. Anderson, F. Antonucci, S. Aoudia, M. A. Arain, M. Araya, H. Armandula, P. Armor, K. G. Arun, Y. Aso, S. Aston, P. Astone, P. Aufmuth, C. Aulbert , et al. (656 additional authors not shown)

Abstract: We present a search for gravitational waves from 116 known millisecond and young pulsars using data from the fifth science run of the LIGO detectors. For this search ephemerides overlapping the run period were obtained for all pulsars using radio and X-ray observations. We demonstrate an updated search method that allows for small uncertainties in the pulsar phase parameters to be included in th… ▽ More We present a search for gravitational waves from 116 known millisecond and young pulsars using data from the fifth science run of the LIGO detectors. For this search ephemerides overlapping the run period were obtained for all pulsars using radio and X-ray observations. We demonstrate an updated search method that allows for small uncertainties in the pulsar phase parameters to be included in the search. We report no signal detection from any of the targets and therefore interpret our results as upper limits on the gravitational wave signal strength. The most interesting limits are those for young pulsars. We present updated limits on gravitational radiation from the Crab pulsar, where the measured limit is now a factor of seven below the spin-down limit. This limits the power radiated via gravitational waves to be less than ~2% of the available spin-down power. For the X-ray pulsar J0537-6910 we reach the spin-down limit under the assumption that any gravitational wave signal from it stays phase locked to the X-ray pulses over timing glitches, and for pulsars J1913+1011 and J1952+3252 we are only a factor of a few above the spin-down limit. Of the recycled millisecond pulsars several of the measured upper limits are only about an order of magnitude above their spin-down limits. For these our best (lowest) upper limit on gravitational wave amplitude is 2.3x10^-26 for J1603-7202 and our best (lowest) limit on the inferred pulsar ellipticity is 7.0x10^-8 for J2124-3358. △ Less

Submitted 26 February, 2010; v1 submitted 19 September, 2009; originally announced September 2009.

Comments: 39 pages, 5 figures, Accepted in The Astrophysical Journal

Report number: LIGO-P080112-v6

Journal ref: Astrophys.J.713:671-685,2010

Search for gravitational-wave bursts associated with gamma-ray bursts using data from LIGO Science Run 5 and Virgo Science Run 1

Authors: LIGO Scientific Collaboration, Virgo Collaboration, B. P. Abbott, R. Abbott, F. Acernese, R. Adhikari, P. Ajith, B. Allen, G. Allen, M. Alshourbagy, R. S. Amin, S. B. Anderson, W. G. Anderson, F. Antonucci, S. Aoudia, M. A. Arain, M. Araya, H. Armandula, P. Armor, K. G. Arun, Y. Aso, S. Aston, P. Astone, P. Aufmuth, C. Aulbert , et al. (643 additional authors not shown)

Abstract: We present the results of a search for gravitational-wave bursts associated with 137 gamma-ray bursts (GRBs) that were detected by satellite-based gamma-ray experiments during the fifth LIGO science run and first Virgo science run. The data used in this analysis were collected from 2005 November 4 to 2007 October 1, and most of the GRB triggers were from the Swift satellite. The search uses a co… ▽ More We present the results of a search for gravitational-wave bursts associated with 137 gamma-ray bursts (GRBs) that were detected by satellite-based gamma-ray experiments during the fifth LIGO science run and first Virgo science run. The data used in this analysis were collected from 2005 November 4 to 2007 October 1, and most of the GRB triggers were from the Swift satellite. The search uses a coherent network analysis method that takes into account the different locations and orientations of the interferometers at the three LIGO-Virgo sites. We find no evidence for gravitational-wave burst signals associated with this sample of GRBs. Using simulated short-duration (<1 s) waveforms, we set upper limits on the amplitude of gravitational waves associated with each GRB. We also place lower bounds on the distance to each GRB under the assumption of a fixed energy emission in gravitational waves, with typical limits of D ~ 15 Mpc (E_GW^iso / 0.01 M_o c^2)^1/2 for emission at frequencies around 150 Hz, where the LIGO-Virgo detector network has best sensitivity. We present astrophysical interpretations and implications of these results, and prospects for corresponding searches during future LIGO-Virgo runs. △ Less

Submitted 7 April, 2010; v1 submitted 26 August, 2009; originally announced August 2009.

Comments: 16 pages, 3 figures. Updated references. To appear in ApJ.

Report number: LIGO-P0900023-v16

Journal ref: Astrophys.J.715:1438-1452, 2010

Beating the spin-down limit on gravitational wave emission from the Crab pulsar

Authors: The LIGO Scientific Collaboration, B. Abbott, R. Abbott, R. Adhikari, P. Ajith, B. Allen, G. Allen, R. Amin, S. B. Anderson, W. G. Anderson, M. A. Arain, M. Araya, H. Armandula, P. Armor, Y. Aso, S. Aston, P. Aufmuth, C. Aulbert, S. Babak, S. Ballmer, H. Bantilan, B. C. Barish, C. Barker, D. Barker, B. Barr , et al. (419 additional authors not shown)

Abstract: We present direct upper limits on gravitational wave emission from the Crab pulsar using data from the first nine months of the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO). These limits are based on two searches. In the first we assume that the gravitational wave emission follows the observed radio timing, giving an upper limit on gravitational wave emissi… ▽ More We present direct upper limits on gravitational wave emission from the Crab pulsar using data from the first nine months of the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO). These limits are based on two searches. In the first we assume that the gravitational wave emission follows the observed radio timing, giving an upper limit on gravitational wave emission that beats indirect limits inferred from the spin-down and braking index of the pulsar and the energetics of the nebula. In the second we allow for a small mismatch between the gravitational and radio signal frequencies and interpret our results in the context of two possible gravitational wave emission mechanisms. △ Less

Submitted 22 July, 2008; v1 submitted 30 May, 2008; originally announced May 2008.

Comments: Accepted for Ap. J. Lett. Minor changes in results due to calibration correction

Report number: LIGO-P070118-00-Z

Journal ref: Astrophys.J.683:L45-L50,2008; Erratum-ibid 706:L203-L204,2009

First observation of 54Zn and its decay by two-proton emission

Authors: B. Blank, A. Bey, G. Canchel, C. Dossat, A. Fleury, J. Giovinazzo, I. Matea, N. Adimi, F. De Oliveira, I. Stefan, G. Georgiev, S. Grevy, J. C. Thomas, C. Borcea, D. Cortina, M. Caamano, M. Stanoiu, F. Aksouh, B. A. Brown, F. C. Barker, W. A. Richter

Abstract: The nucleus 54Zn has been observed for the first time in an experiment at the SISSI/LISE3 facility of GANIL in the quasi-fragmentation of a 58Ni beam at 74.5 MeV/nucleon in a natNi target. The fragments were analysed by means of the ALPHA-LISE3 separator and implanted in a silicon-strip detector where correlations in space and time between implantation and subsequent decay events allowed us to g… ▽ More The nucleus 54Zn has been observed for the first time in an experiment at the SISSI/LISE3 facility of GANIL in the quasi-fragmentation of a 58Ni beam at 74.5 MeV/nucleon in a natNi target. The fragments were analysed by means of the ALPHA-LISE3 separator and implanted in a silicon-strip detector where correlations in space and time between implantation and subsequent decay events allowed us to generate almost background free decay spectra for about 25 different nuclei at the same time. Eight 54Zn implantation events were observed. From the correlated decay events, the half-life of 54Zn is determined to be 3.2 +1.8/-0.8 ms. Seven of the eight implantations are followed by two-proton emission with a decay energy of 1.48(2) MeV. The decay energy and the partial half-life are compared to model predictions and allow for a test of these two-proton decay models. △ Less

Submitted 13 May, 2005; originally announced May 2005.

Comments: 4 pages, 4 figures, accepted for publication in PRL

Journal ref: Phys.Rev.Lett.94:232501,2005

Competition and cooperation:aspects of dynamics in sandpiles

Authors: Anita Mehta, J M Luck, J M Berg, G C Barker

Abstract: In this article, we review some of our approaches to granular dynamics, now well known to consist of both fast and slow relaxational processes. In the first case, grains typically compete with each other, while in the second, they cooperate. A typical result of {\it cooperation} is the formation of stable bridges, signatures of spatiotemporal inhomogeneities; we review their geometrical characte… ▽ More In this article, we review some of our approaches to granular dynamics, now well known to consist of both fast and slow relaxational processes. In the first case, grains typically compete with each other, while in the second, they cooperate. A typical result of {\it cooperation} is the formation of stable bridges, signatures of spatiotemporal inhomogeneities; we review their geometrical characteristics and compare theoretical results with those of independent simulations. {\it Cooperative} excitations due to local density fluctuations are also responsible for relaxation at the angle of repose; the {\it competition} between these fluctuations and external driving forces, can, on the other hand, result in a (rare) collapse of the sandpile to the horizontal. Both these features are present in a theory reviewed here. An arena where the effects of cooperation versus competition are felt most keenly is granular compaction; we review here a random graph model, where three-spin interactions are used to model compaction under tapping. The compaction curve shows distinct regions where 'fast' and 'slow' dynamics apply, separated by what we have called the {\it single-particle relaxation threshold}. In the final section of this paper, we explore the effect of shape -- jagged vs. regular -- on the compaction of packings near their jamming limit. One of our major results is an entropic landscape that, while microscopically rough, manifests {\it Edwards' flatness} at a macroscopic level. Another major result is that of surface intermittency under low-intensity shaking. △ Less

Submitted 28 March, 2005; v1 submitted 31 December, 2004; originally announced December 2004.

Comments: 36 pages, 23 figures, minor corrections

Journal ref: J. Phys.: Condens. Matter 17 (2005) S2657-2687

Cooperativity in sandpiles: statistics of bridge geometries

Authors: Anita Mehta, G. C. Barker, J. M. Luck

Abstract: Bridges form dynamically in granular media as a result of spatiotemporal inhomogeneities. We classify bridges as linear and complex, and analyse their geometrical characteristics. In particular, we find that the length distribution of linear bridges is exponential. We then turn to the analysis of the orientational distribution of linear bridges and find that, in three dimensions, they are {\it v… ▽ More Bridges form dynamically in granular media as a result of spatiotemporal inhomogeneities. We classify bridges as linear and complex, and analyse their geometrical characteristics. In particular, we find that the length distribution of linear bridges is exponential. We then turn to the analysis of the orientational distribution of linear bridges and find that, in three dimensions, they are {\it vertically diffusive but horizontally superdiffusive}; thus, when they exist, long linear bridges form `domes'. Our results are in good accord with Monte Carlo simulations of bridge structure; we make predictions for quantities that are experimentally accessible, and suggest that bridges are very closely related to force chains. △ Less

Submitted 2 November, 2004; v1 submitted 16 December, 2003; originally announced December 2003.

Comments: 15 pages, 10 figures. Minor changes and updates

Journal ref: JSTAT (2004) P10014

Structure and distribution of arches in shaken hard sphere deposits

Authors: Luis A. Pugnaloni, G. C. Barker

Abstract: We investigate the structure and distribution of arches formed by spherical, hard particles shaken in an external field after they come to rest. Arches (or bridges) are formed during a computer-simulated, non-sequential deposition of the spheres after each shaking cycle. We identify these arches by means of a connectivity criterion and study their structural characteristics and spatial distribut… ▽ More We investigate the structure and distribution of arches formed by spherical, hard particles shaken in an external field after they come to rest. Arches (or bridges) are formed during a computer-simulated, non-sequential deposition of the spheres after each shaking cycle. We identify these arches by means of a connectivity criterion and study their structural characteristics and spatial distribution. We find that neither the size distribution nor the shape of the arches is strongly affected by the packing fraction of the deposit. Conversely, the spatial distribution and orientation of the bridges do depend on the volume fraction occupied by the spheres. △ Less

Submitted 3 February, 2004; v1 submitted 18 July, 2003; originally announced July 2003.

Comments: 20 pages, 5 figures

Journal ref: Physica A, 337, 428-442 (2004)

Multi-particle structures in non-sequentially reorganized hard sphere deposits

Authors: Luis A. Pugnaloni, G. C. Barker, Anita Mehta

Abstract: We have examined extended structures, bridges and arches, in computer generated, non-sequentially stabilized, hard sphere deposits. The bridges and arches have well defined distributions of sizes and shapes. The distribution functions reflect the contraints associated with hard particle packing and the details of the restructuring process. A subpopulation of string-like bridges has been identifi… ▽ More We have examined extended structures, bridges and arches, in computer generated, non-sequentially stabilized, hard sphere deposits. The bridges and arches have well defined distributions of sizes and shapes. The distribution functions reflect the contraints associated with hard particle packing and the details of the restructuring process. A subpopulation of string-like bridges has been identified. Bridges are fundamental microstructural elements in real granular systems and their sizes and shapes dominate considerations of structural properties and flow instabilities such as jamming. △ Less

Submitted 18 October, 2001; originally announced October 2001.

Comments: 9 pages, 7 figures

Inhomogeneous relaxation in vibrated granular media: consolidation waves

Authors: G. C. Barker, Anita Mehta

Abstract: We investigate the spatial dependence of the density of vibrated granular beds, using simulations based on a hybrid Monte Carlo algorithm. We find that the initial consolidation is typically inhmogeneous, both in the presence of a constant shaking intensity and when the granular bed is submitted to `annealed shaking'. We also present a theoretical model which explains such inhomogeneous relaxati… ▽ More We investigate the spatial dependence of the density of vibrated granular beds, using simulations based on a hybrid Monte Carlo algorithm. We find that the initial consolidation is typically inhmogeneous, both in the presence of a constant shaking intensity and when the granular bed is submitted to `annealed shaking'. We also present a theoretical model which explains such inhomogeneous relaxation in terms of a `consolidation wave', in good qualitative agreement with our simulations. Our results are also in qualitative agreement with recent simulations. △ Less

Submitted 18 October, 2000; originally announced October 2000.

Comments: 5 pages, 13 figures

Bistability and hysteresis in tilted sandpiles

Authors: Anita Mehta, G. C. Barker

Abstract: We show that tilting a model sandpile that has dynamic disorder leads to bistability and hysteresis at the angle of repose. Also the distribution of {\it local slopes} shows an interesting dependence on the amount of tilt - weakly tilted sandpiles retain the quasi-continuous distributions of the steady state, while large tilt makes the distribution more discrete, with local slopes clustered roun… ▽ More We show that tilting a model sandpile that has dynamic disorder leads to bistability and hysteresis at the angle of repose. Also the distribution of {\it local slopes} shows an interesting dependence on the amount of tilt - weakly tilted sandpiles retain the quasi-continuous distributions of the steady state, while large tilt makes the distribution more discrete, with local slopes clustered round particular values. These observations are used to explain recent experimental results on avalanche shapes; we give a theoretical framework in terms of directed percolation. △ Less

Submitted 10 June, 2000; v1 submitted 9 June, 2000; originally announced June 2000.

Comments: 6 pages with 7 figures

Avalanches at rough surfaces

Authors: G. C. Barker, Anita Mehta

Abstract: We describe the surface properties of a simple lattice model of a sandpile that includes evolving structural disorder. We present a dynamical scaling hypothesis for generic sandpile automata, and additionally explore the kinetic roughening of the sandpile surface, indicating its relationship with the sandpile evolution. Finally, we comment on the surprisingly good agreement found between this mo… ▽ More We describe the surface properties of a simple lattice model of a sandpile that includes evolving structural disorder. We present a dynamical scaling hypothesis for generic sandpile automata, and additionally explore the kinetic roughening of the sandpile surface, indicating its relationship with the sandpile evolution. Finally, we comment on the surprisingly good agreement found between this model, and a previous continuum model of sandpile dynamics, from the viewpoint of critical phenomena. △ Less

Submitted 1 March, 2000; v1 submitted 16 December, 1999; originally announced December 1999.

Comments: 8 Pages, 7 Figures (in 15 parts); accepted for publication in Physical Review E

Glassy dynamics in granular compaction

Authors: Anita Mehta, G. C. Barker

Abstract: Two models are presented to study the influence of slow dynamics on granular compaction. It is found in both cases that high values of packing fraction are achieved only by the slow relaxation of cooperative structures. Ongoing work to study the full implications of these results is discussed. Two models are presented to study the influence of slow dynamics on granular compaction. It is found in both cases that high values of packing fraction are achieved only by the slow relaxation of cooperative structures. Ongoing work to study the full implications of these results is discussed. △ Less

Submitted 1 March, 2000; v1 submitted 6 December, 1999; originally announced December 1999.

Comments: 12 pages, 9 figures; accepted in J. Phys: Condensed Matter, proceedings of the Trieste workshop on 'Unifying concepts in glass physics'