-
The Engineering Development Array 2: design, performance and lessons from an SKA-Low prototype station
Authors:
Randall Wayth,
Marcin Sokolowski,
Jess Broderick,
Steven J. Tingay,
Raunaq Bhushan,
Tom Booler,
Riccardo Chiello,
David B. Davidson,
David Emrich,
Budi Juswardy,
David Kenney,
Giulia Macario,
Alessio Magro,
Andrea Mattana,
David Minchin,
Jader Monari,
Andrew McPhail,
Federico Perini,
Giuseppe Pupillo,
Marco Schiaffino,
Ravi Subrahmanya,
Andre van Es,
Mia Walker,
Mark Waterson
Abstract:
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous…
▽ More
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous generation instruments, as well as the motivation for the changes. Using the array as an imaging interferometer, we measure the sensitivity of the array at five frequencies ranging from 70 to 320 MHz.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
The Aperture Array Verification System 1: System overview and early commissioning results
Authors:
P. Benthem,
R. Wayth,
E. de Lera Acedo,
K. Zarb Adami,
M. Alderighi,
C. Belli,
P. Bolli,
T. Booler,
J. Borg,
J. W. Broderick,
S. Chiarucci,
R. Chiello,
L. Ciani,
G. Comoretto,
B. Crosse,
D. Davidson,
A. DeMarco,
D. Emrich,
A. van Es,
D. Fierro,
A. Faulkner,
M. Gerbers,
N. Razavi-Ghods,
P. Hall,
L. Horsley
, et al. (29 additional authors not shown)
Abstract:
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verific…
▽ More
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Characterization of the SKA1-Low prototype station Aperture Array Verification System 2
Authors:
Giulia Macario,
Giuseppe Pupillo,
Gianni Bernardi,
Pietro Bolli,
Paola Di Ninni,
Giovanni Comoretto,
Andrea Mattana,
Jader Monari,
Federico Perini,
Marco Schiaffino,
Marcin Sokolowski,
Randall Wayth,
Jess Broderick,
Mark Waterson,
Maria Grazia Labate,
Riccardo Chiello,
Alessio Magro,
Tom Booler,
Raunaq Bhushan
Abstract:
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Ve…
▽ More
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Verification System 2 (AAVS2), operational since late 2019, is the last full-size engineering prototype station deployed at the MRO site before the start of the SKA1-Low construction phase. The aim of this paper is to characterize the station performance through commissioning observations at six different frequencies (55, 70, 110, 160, 230 and 320 MHz) collected during its first year of activities. We describe the calibration procedure, present the resulting all-sky images and their analysis, and discuss the station calibratability and system stability. Using the difference imaging method, we also derive estimates of the SKA1-Low sensitivity for the same frequencies, and compare them to those obtained through electromagnetic simulations across the entire telescope bandwidth, finding good agreement (within $\leq 13%$). Moreover, our estimates exceed the SKA1-Low requirements at all the considered frequencies, by up to a factor of $\sim$2.3. Our results are very promising and allow an initial validation of the AAVS2 prototype station performance, which is an important step towards the upcoming SKA-Low telescope construction and science.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
First Season MWA Phase II EoR Power Spectrum Results at Redshift 7
Authors:
W. Li,
J. C. Pober,
N. Barry,
B. J. Hazelton,
M. F. Morales,
C. M. Trott,
A. Lanman,
M. Wilensky,
I. Sullivan,
A. P. Beardsley,
T. Booler,
J. D. Bowman,
R. Byrne,
B. Crosse,
D. Emrich,
T. M. O. Franzen,
K. Hasegawa,
L. Horsley,
M. Johnston-Hollitt,
D. C. Jacobs,
C. H. Jordan,
R. C. Joseph,
T. Kaneuji,
D. L. Kaplan,
D. Kenney
, et al. (22 additional authors not shown)
Abstract:
The compact configuration of Phase II of the Murchison Widefield Array (MWA) consists of both a redundant subarray and pseudo-random baselines, offering unique opportunities to perform sky-model and redundant interferometric calibration. The highly redundant hexagonal cores give improved power spectrum sensitivity. In this paper, we present the analysis of nearly 40 hours of data targeting one of…
▽ More
The compact configuration of Phase II of the Murchison Widefield Array (MWA) consists of both a redundant subarray and pseudo-random baselines, offering unique opportunities to perform sky-model and redundant interferometric calibration. The highly redundant hexagonal cores give improved power spectrum sensitivity. In this paper, we present the analysis of nearly 40 hours of data targeting one of the MWA's EoR fields observed in 2016. We use both improved analysis techniques presented in Barry et al. (2019) as well as several additional techniques developed for this work, including data quality control methods and interferometric calibration approaches. We show the EoR power spectrum limits at redshift 6.5, 6.8 and 7.1 based on our deep analysis on this 40-hour data set. These limits span a range in $k$ space of $0.18$ $h$ $\mathrm{Mpc^{-1}}$ $<k<1.6$ $h$ $\mathrm{Mpc^{-1}}$, with a lowest measurement of $Δ^2\leqslant2.39\times 10^3$ $\mathrm{mK}^2$ at $k=0.59$ $h$ $\mathrm{Mpc^{-1}}$ and $z=6.5$.
△ Less
Submitted 20 December, 2019; v1 submitted 22 November, 2019;
originally announced November 2019.
-
Gridded and direct Epoch of Reionisation bispectrum estimates using the Murchison Widefield Array
Authors:
Cathryn M. Trott,
Catherine A. Watkinson,
Christopher H. Jordan,
Shintaro Yoshiura,
Suman Majumdar,
N. Barry,
R. Byrne,
B. J. Hazelton,
K. Hasegawa,
R. Joseph,
T. Kaneuji,
K. Kubota,
W. Li,
J. Line,
C. Lynch,
B. McKinley,
D. A. Mitchell,
M. F. Morales,
S. Murray,
B. Pindor,
J. C. Pober,
M. Rahimi,
J. Riding,
K. Takahashi,
S. J. Tingay
, et al. (20 additional authors not shown)
Abstract:
We apply two methods to estimate the 21~cm bispectrum from data taken within the Epoch of Reionisation (EoR) project of the Murchison Widefield Array (MWA). Using data acquired with the Phase II compact array allows a direct bispectrum estimate to be undertaken on the multiple redundantly-spaced triangles of antenna tiles, as well as an estimate based on data gridded to the $uv$-plane. The direct…
▽ More
We apply two methods to estimate the 21~cm bispectrum from data taken within the Epoch of Reionisation (EoR) project of the Murchison Widefield Array (MWA). Using data acquired with the Phase II compact array allows a direct bispectrum estimate to be undertaken on the multiple redundantly-spaced triangles of antenna tiles, as well as an estimate based on data gridded to the $uv$-plane. The direct and gridded bispectrum estimators are applied to 21 hours of high-band (167--197~MHz; $z$=6.2--7.5) data from the 2016 and 2017 observing seasons. Analytic predictions for the bispectrum bias and variance for point source foregrounds are derived. We compare the output of these approaches, the foreground contribution to the signal, and future prospects for measuring the bispectra with redundant and non-redundant arrays. We find that some triangle configurations yield bispectrum estimates that are consistent with the expected noise level after 10 hours, while equilateral configurations are strongly foreground-dominated. Careful choice of triangle configurations may be made to reduce foreground bias that hinders power spectrum estimators, and the 21~cm bispectrum may be accessible in less time than the 21~cm power spectrum for some wave modes, with detections in hundreds of hours.
△ Less
Submitted 17 May, 2019;
originally announced May 2019.
-
The Phase II Murchison Widefield Array: Design Overview
Authors:
Randall B. Wayth,
Steven J. Tingay,
Cathryn M. Trott,
David Emrich,
Melanie Johnston-Hollitt,
Ben McKinley,
B. M. Gaensler,
A. P. Beardsley,
T. Booler,
B. Crosse,
T. M. O. Franzen,
L. Horsley,
D. L. Kaplan,
D. Kenney,
M. F. Morales,
D. Pallot,
G. Sleap,
K. Steele,
M. Walker,
A. Williams,
C. Wu,
Iver. H. Cairns,
M. D. Filipovic,
S. Johnston,
T. Murphy
, et al. (4 additional authors not shown)
Abstract:
We describe the motivation and design details of the "Phase II" upgrade of the Murchison Widefield Array (MWA) radio telescope. The expansion doubles to 256 the number of antenna tiles deployed in the array. The new antenna tiles enhance the capabilities of the MWA in several key science areas. Seventy-two of the new tiles are deployed in a regular configuration near the existing MWA core. These n…
▽ More
We describe the motivation and design details of the "Phase II" upgrade of the Murchison Widefield Array (MWA) radio telescope. The expansion doubles to 256 the number of antenna tiles deployed in the array. The new antenna tiles enhance the capabilities of the MWA in several key science areas. Seventy-two of the new tiles are deployed in a regular configuration near the existing MWA core. These new tiles enhance the surface brightness sensitivity of the MWA and will improve the ability of the MWA to estimate the slope of the Epoch of Reionisation power spectrum by a factor of ~3.5. The remaining 56 tiles are deployed on long baselines, doubling the maximum baseline of the array and improving the array u,v coverage. The improved imaging capabilities will provide an order of magnitude improvement in the noise floor of MWA continuum images. The upgrade retains all of the features that have underpinned the MWA's success (large field-of-view, snapshot image quality, pointing agility) and boosts the scientific potential with enhanced imaging capabilities and by enabling new calibration strategies.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
Follow up of GW170817 and its electromagnetic counterpart by Australian-led observing programs
Authors:
I. Andreoni,
K. Ackley,
J. Cooke,
A. Acharyya,
J. R. Allison,
G. E. Anderson,
M. C. B. Ashley,
D. Baade,
M. Bailes,
K. Bannister,
A. Beardsley,
M. S. Bessell,
F. Bian,
P. A. Bland,
M. Boer,
T. Booler,
A. Brandeker,
I. S. Brown,
D. Buckley,
S. -W. Chang,
D. M. Coward,
S. Crawford,
H. Crisp,
B. Crosse,
A. Cucchiara
, et al. (100 additional authors not shown)
Abstract:
The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescope…
▽ More
The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescopes and partner observatories as part of Australian-based and Australian-led research programs. We report early- to late-time multi-wavelength observations, including optical imaging and spectroscopy, mid-infrared imaging, radio imaging, and searches for fast radio bursts. Our optical spectra reveal that the transient source afterglow cooled from approximately 6400K to 2100K over a 7-day period and produced no significant optical emission lines. The spectral profiles, cooling rate, and photometric light curves are consistent with the expected outburst and subsequent processes of a binary neutron star merger. Star formation in the host galaxy probably ceased at least a Gyr ago, although there is evidence for a galaxy merger. Binary pulsars with short (100 Myr) decay times are therefore unlikely progenitors, but pulsars like PSR B1534+12 with its 2.7 Gyr coalescence time could produce such a merger. The displacement (about 2.2 kpc) of the binary star system from the centre of the main galaxy is not unusual for stars in the host galaxy or stars originating in the merging galaxy, and therefore any constraints on the kick velocity imparted to the progenitor are poor.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
The Engineering Development Array: A low frequency radio telescope utilising SKA precursor technology
Authors:
Randall Wayth,
Marcin Sokolowski,
Tom Booler,
Brian Crosse,
David Emrich,
Robert Grootjans,
Peter J. Hall,
Luke Horsley,
Budi Juswardy,
David Kenney,
Kim Steele,
Adrian Sutinjo,
Steven J. Tingay,
Daniel Ung,
Mia Walker,
Andrew Williams,
A. Beardsley,
T. M. O. Franzen,
M. Johnston-Hollitt,
D. L. Kaplan,
M. F. Morales,
D. Pallot,
C. M. Trott,
C. Wu
Abstract:
We describe the design and performance of the Engineering Development Array (EDA), which is a low frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased-array. The EDA was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array (SKA) precursor technology and expertise, specifically from the Murchison Widefield Array (MWA)…
▽ More
We describe the design and performance of the Engineering Development Array (EDA), which is a low frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased-array. The EDA was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array (SKA) precursor technology and expertise, specifically from the Murchison Widefield Array (MWA) radio telescope. Using drift scans and a model for the sky brightness temperature at low frequencies, we have derived the EDA's receiver temperature as a function of frequency. The EDA is shown to be sky-noise limited over most of the frequency range measured between 60 and 240 MHz. By using the EDA in interferometric mode with the MWA, we used calibrated visibilities to measure the absolute sensitivity of the array. The measured array sensitivity matches very well with a model based on the array layout and measured receiver temperature. The results demonstrate the practicality and feasibility of using MWA-style precursor technology for SKA-scale stations. The modular architecture of the EDA allows upgrades to the array to be rolled out in a staged approach. Future improvements to the EDA include replacing the second stage beamformer with a fully digital system, and to transition to using RF-over-fibre for the signal output from first stage beamformers.
△ Less
Submitted 11 July, 2017;
originally announced July 2017.
-
Characterization of a Low-Frequency Radio Astronomy Prototype Array in Western Australia
Authors:
A. T. Sutinjo,
T. M. Colegate,
R. B. Wayth,
P. J. Hall,
E. de Lera Acedo,
T. Booler,
A. J. Faulkner,
L. Feng,
N. Hurley-Walker,
B. Juswardy,
S. K. Padhi,
N. Razavi-Ghods,
M. Sokolowski,
S. J. Tingay,
J. G. Bij de Vaate
Abstract:
We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory…
▽ More
We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory (MRO) near the Australian Square Kilometre Array (SKA) core site. We characterize the AAVS0.5 using two methods: in-situ radio interferometry with astronomical sources and an engineering approach based on detailed full-wave simulation. In-situ measurement of the small prototype array is challenging due to the dominance of the Galactic noise and the relatively weaker calibration sources easily accessible in the southern sky. The MWA, with its 128 "tiles" and up to 3 km baselines, enabled in-situ measurement via radio interferometry. We present array sensitivity and beam pattern characterization results and compare to detailed full-wave simulation. We discuss areas where differences between the two methods exist and offer possibilities for improvement. Our work demonstrates the value of the dual astronomy-simulation approach in upcoming SKA design work.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
A Digital-Receiver for the Murchison Widefield Array
Authors:
Thiagaraj Prabu,
K. S. Srivani,
D. Anish Roshi,
P. A. Kamini,
S. Madhavi,
David Emrich,
Brian Crosse,
Andrew J. Williams,
Mark Waterson,
Avinash A. Deshpande,
N. Udaya Shankar,
Ravi Subrahmanyan,
Frank H. Briggs,
Robert F. Goeke,
Steven J. Tingay,
Melanie Johnston-Hollitt,
Gopalakrishna M R,
Edward H. Morgan,
Joseph Pathikulangara,
John D. Bunton,
Grant Hampson,
Christopher Williams,
Stephen M. Ord,
Randall B. Wayth,
Deepak Kumar
, et al. (33 additional authors not shown)
Abstract:
An FPGA-based digital-receiver has been developed for a low-frequency imaging radio interferometer, the Murchison Widefield Array (MWA). The MWA, located at the Murchison Radio-astronomy Observatory (MRO) in Western Australia, consists of 128 dual-polarized aperture-array elements (tiles) operating between 80 and 300\,MHz, with a total processed bandwidth of 30.72 MHz for each polarization. Radio-…
▽ More
An FPGA-based digital-receiver has been developed for a low-frequency imaging radio interferometer, the Murchison Widefield Array (MWA). The MWA, located at the Murchison Radio-astronomy Observatory (MRO) in Western Australia, consists of 128 dual-polarized aperture-array elements (tiles) operating between 80 and 300\,MHz, with a total processed bandwidth of 30.72 MHz for each polarization. Radio-frequency signals from the tiles are amplified and band limited using analog signal conditioning units; sampled and channelized by digital-receivers. The signals from eight tiles are processed by a single digital-receiver, thus requiring 16 digital-receivers for the MWA. The main function of the digital-receivers is to digitize the broad-band signals from each tile, channelize them to form the sky-band, and transport it through optical fibers to a centrally located correlator for further processing. The digital-receiver firmware also implements functions to measure the signal power, perform power equalization across the band, detect interference-like events, and invoke diagnostic modes. The digital-receiver is controlled by high-level programs running on a single-board-computer. This paper presents the digital-receiver design, implementation, current status, and plans for future enhancements.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
Realisation of a low frequency SKA Precursor: The Murchison Widefield Array
Authors:
S. J. Tingay,
R. Goeke,
J. N. Hewitt,
E. Morgan,
R. A Remillard,
C. L. Williams,
J. D. Bowman,
D. Emrich,
S. M. Ord,
T. Booler,
B. Crosse,
D. Pallot,
W. Arcus,
T. Colegate,
P. J. Hall,
D. Herne,
M. J. Lynch,
F. Schlagenhaufer,
S. Tremblay,
R. B. Wayth,
M. Waterson,
D. A. Mitchell,
R. J. Sault,
R. L. Webster,
J. S. B. Wyithe
, et al. (34 additional authors not shown)
Abstract:
The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) dete…
▽ More
The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) detection of fluctuations in the brightness temperature of the diffuse redshifted 21 cm line of neutral hydrogen from the epoch of reionisation; 2) studies of Galactic and extragalactic processes based on deep, confusion-limited surveys of the full sky visible to the array; 3) time domain astrophysics through exploration of the variable radio sky; and 4) solar imaging and characterisation of the heliosphere and ionosphere via propagation effects on background radio source emission. This paper will focus on a brief discussion of the as-built MWA system, highlighting several novel characteristics of the instrument, and a brief progress report (as of June 2012) on the final construction phase. Practical completion of the MWA is expected in November 2012, with commissioning commencing from approximately August 2012 and operations commencing near mid 2013. A brief description of recent science results from the MWA prototype instrument is given.
△ Less
Submitted 6 December, 2012;
originally announced December 2012.
-
The Murchison Widefield Array: the Square Kilometre Array Precursor at low radio frequencies
Authors:
S. J. Tingay,
R. Goeke,
J. D. Bowman,
D. Emrich,
S. M. Ord,
D. A. Mitchell,
M. F. Morales,
T. Booler,
B. Crosse,
D. Pallot,
A. Wicenec,
W. Arcus,
D. Barnes,
G. Bernardi,
F. Briggs,
S. Burns,
J. D. Bunton,
R. J. Cappallo,
T. Colegate,
B. E. Corey,
A. Deshpande,
L. deSouza,
B. M. Gaensler,
L. J. Greenhill,
J. Hall
, et al. (35 additional authors not shown)
Abstract:
The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80-300 MHz, with a processed bandwidth of 30.72 MHz for both…
▽ More
The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80-300 MHz, with a processed bandwidth of 30.72 MHz for both linear polarisations, and consists of 128 aperture arrays (known as tiles) distributed over a ~3 km diameter area. Novel hybrid hardware/software correlation and a real-time imaging and calibration systems comprise the MWA signal processing backend. In this paper the as-built MWA is described both at a system and sub-system level, the expected performance of the array is presented, and the science goals of the instrument are summarised.
△ Less
Submitted 29 June, 2012;
originally announced June 2012.