-
Long Short-Term Memory Networks for Anomaly Detection in Magnet Power Supplies of Particle Accelerators
Authors:
Ihar Lobach,
Michael Borland
Abstract:
This research introduces a novel anomaly detection method designed to enhance the operational reliability of particle accelerators - complex machines that accelerate elementary particles to high speeds for various scientific applications. Our approach utilizes a Long Short-Term Memory (LSTM) neural network to predict the temperature of key components within the magnet power supplies (PSs) of these…
▽ More
This research introduces a novel anomaly detection method designed to enhance the operational reliability of particle accelerators - complex machines that accelerate elementary particles to high speeds for various scientific applications. Our approach utilizes a Long Short-Term Memory (LSTM) neural network to predict the temperature of key components within the magnet power supplies (PSs) of these accelerators, such as heatsinks, capacitors, and resistors, based on the electrical current flowing through the PS. Anomalies are declared when there is a significant discrepancy between the LSTM-predicted temperatures and actual observations. Leveraging a custom-built test stand, we conducted comprehensive performance comparisons with a less sophisticated method, while also fine-tuning hyperparameters of both methods. This process not only optimized the LSTM model but also unequivocally demonstrated the superior efficacy of this new proposed method. The dedicated test stand also facilitated exploratory work on more advanced strategies for monitoring interior PS temperatures using infrared cameras. A proof-of-concept example is provided.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Numerical Modeling of a Proof-of-Principle Experiment on Optical Stochastic Cooling at the IOTA Electron Storage Ring
Authors:
Austin Dick,
Michael Borland,
Jonathan Jarvis,
Valeri Lebedev,
Philippe Piot,
Aleksandr Romanov,
Michael Wallbank
Abstract:
Cooling of beams circulating in storage rings is critical for many applications including particle colliders and synchrotron light sources. A method enabling unprecedented beam-cooling rates, optical stochastic cooling (OSC), was recently demonstrated in the IOTA electron storage ring at Fermilab. This paper describes the numerical implementation of the OSC process in the particle-tracking program…
▽ More
Cooling of beams circulating in storage rings is critical for many applications including particle colliders and synchrotron light sources. A method enabling unprecedented beam-cooling rates, optical stochastic cooling (OSC), was recently demonstrated in the IOTA electron storage ring at Fermilab. This paper describes the numerical implementation of the OSC process in the particle-tracking program ELEGANT and discusses the validation of the developed model with available experimental data. The model is also employed to highlight some features associated with different modes of operation of OSC. The developed simulation tool should be valuable in guiding future configurations of optical stochastic cooling and, more broadly, modeling self-field-based beam manipulations.
△ Less
Submitted 15 June, 2023; v1 submitted 13 June, 2023;
originally announced June 2023.
-
Simulations and measurements of the impact of collective effects on dynamic aperture
Authors:
V. Sajaev,
R. Lindberg,
S. Shin,
M. Borland
Abstract:
We describe a benchmark study of collective and nonlinear dynamics in an APS storage ring. A 1-mm long bunch was assumed in the calculation of wakefield and element by element particle tracking with distributed wakefield component along the ring was performed in Elegant simulation. The result of Elegant simulation differed by less than 5 % from experimental measurement
We describe a benchmark study of collective and nonlinear dynamics in an APS storage ring. A 1-mm long bunch was assumed in the calculation of wakefield and element by element particle tracking with distributed wakefield component along the ring was performed in Elegant simulation. The result of Elegant simulation differed by less than 5 % from experimental measurement
△ Less
Submitted 3 December, 2017;
originally announced December 2017.
-
GPU acceleration and performance of the particle-beam-dynamics code Elegant
Authors:
J. R. King,
I. V. Pogorelov,
K. M. Amyx,
M. Borland,
R. Soliday
Abstract:
Elegant is an accelerator physics and particle-beam dynamics code widely used for modeling and design of a variety of high-energy particle accelerators and accelerator-based systems. In this paper we discuss a recently developed version of the code that can take advantage of CUDA-enabled graphics processing units (GPUs) to achieve significantly improved performance for a large class of simulations…
▽ More
Elegant is an accelerator physics and particle-beam dynamics code widely used for modeling and design of a variety of high-energy particle accelerators and accelerator-based systems. In this paper we discuss a recently developed version of the code that can take advantage of CUDA-enabled graphics processing units (GPUs) to achieve significantly improved performance for a large class of simulations that are important in practice. The GPU version is largely defined by a framework that simplifies implementations of the fundamental kernel types that are used by Elegant: particle operations, reductions, particle loss, histograms, array convolutions and random number generation. Accelerated performance on the Titan Cray XK-7 supercomputer is approximately 6-10 times better with the GPU than all the CPU cores associated with the same node count. In addition to performance, the maintainability of the GPU-accelerated version of the code was considered a key design objective. Accuracy with respect to the CPU implementation is also a core consideration. Four different methods are used to ensure that the accelerated code faithfully reproduces the CPU results.
△ Less
Submitted 20 November, 2018; v1 submitted 19 October, 2017;
originally announced October 2017.
-
A Concept For Cancelling The Leakage Field Inside The Stored Beam Chamber Of A Septum Magnet
Authors:
M. Abliz,
M. Jaski,
A. Xiao,
A. Jain,
U. Wienands,
H. Cease,
M. Borland,
G. Decker,
J. Kerby
Abstract:
The Advanced Photon Source is in the process of up-grading its storage ring from a double-bend to a multi-bend lattice as part of the APS Upgrade Project (APS-U). A swap-out injection scheme is planned for the APS-U to keep a constant beam current and to enable a small dynamic aperture. A novel concept that cancels out the effect of leakage field inside the stored beam chamber was introduced in th…
▽ More
The Advanced Photon Source is in the process of up-grading its storage ring from a double-bend to a multi-bend lattice as part of the APS Upgrade Project (APS-U). A swap-out injection scheme is planned for the APS-U to keep a constant beam current and to enable a small dynamic aperture. A novel concept that cancels out the effect of leakage field inside the stored beam chamber was introduced in the design of the septum magnet. As a result, the horizontal deflecting angle of the stored beam was reduced to below 1 micro-rad with a 2 mm septum thick-ness and 1.06T normal injection field. The concept helped to minimize the integrated skew quadrupole field and normal sextupole fields inside stored beam chamber as well. The designed septum magnet deflects the injected electron beam by 89 mrad with a ring energy of 6 GeV. The stored beam chamber has an 8 mm x 6 mm super-ellipsoidal aperture. The magnet is straight; however, it is tilted in yaw, roll, and pitch from the stored beam cham-ber to meet the on axis swap out injection requirements for the APS-U lattice.
△ Less
Submitted 19 April, 2017;
originally announced April 2017.
-
Use of Coherent Transition Radiation to Set Up the APS RF Thermionic Gun to Produce High-Brightness Beams for SASE FEL Experiments
Authors:
Nicholas Sereno,
Michael Borland,
Alex Lumpkin
Abstract:
We describe use of the Advanced Photon Source (APS) rf thermionic gun, alpha magnet beamline, and linac to produce a stable high-brightness beam in excess of 100 amperes peak current with normalized emittance of 10 pi mm-mrad. To obtain peak currents greater than 100 amperes, the rf gun system must be tuned to produce a FWHM bunch length on the order of 350 fs. Bunch lengths this short are measu…
▽ More
We describe use of the Advanced Photon Source (APS) rf thermionic gun, alpha magnet beamline, and linac to produce a stable high-brightness beam in excess of 100 amperes peak current with normalized emittance of 10 pi mm-mrad. To obtain peak currents greater than 100 amperes, the rf gun system must be tuned to produce a FWHM bunch length on the order of 350 fs. Bunch lengths this short are measured using coherent transition radiation (CTR) produced when the rf gun beam, accelerated to 40 MeV, strikes a metal foil. The CTR is detected using a Golay detector attached to one arm of a Michelson interferometer. The alpha magnet current and gun rf phase are adjusted so as to maximize the CTR signal at the Golay detector, which corresponds to the minimum bunch length. The interferometer is used to measure the autocorrelation of the CTR radiation. The minimum phase approximation is used to derive the bunch profile from the autocorrelation. The high-brightness beam is accelerated to 217 MeV and used to produce SASE in five APS undulators installed in the Low- Energy Undulator Test Line (LEUTL) experiment hall. Initial optical measurements showed a gain length of 1.3 m at 530 nm. * Work supported by U. S. Department of Energy, Office of Basic Energy Sciences, under Contract No. W-31-109-ENG-38.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
A Highly Flexible Bunch Compressor for the APS LEUTL FEL
Authors:
Michael Borland,
John Lewellen,
Steve Milton
Abstract:
The LEUTL FEL at the APS has achieved gain at 530 nm with peak beam current \~100 A. In an effort to push to 120 nm and beyond, we have designed and are commissioning a bunch compressor to increase the peak current to 600 A or more. The bunch compressor uses a four-dipole chicane at an energy of 100 to 210 MeV. To provide options for control of emittance growth due to coherent synchrotron radiat…
▽ More
The LEUTL FEL at the APS has achieved gain at 530 nm with peak beam current \~100 A. In an effort to push to 120 nm and beyond, we have designed and are commissioning a bunch compressor to increase the peak current to 600 A or more. The bunch compressor uses a four-dipole chicane at an energy of 100 to 210 MeV. To provide options for control of emittance growth due to coherent synchrotron radiation (CSR), the chicane has variable R56. The central pair of dipoles is movable, accommodating variable R56 with less concern about emittance dilution from nonuniformity of the dipole field. The symmetry of the chicane is also variable via longitudinal motion of the final dipole, which is predicted to have an effect on emittance growth. Following the chicane, a three-screen emittance measurement system should permit resolution of the difference in emittance growth between various chicane configurations. A vertical bending magnet analysis line is present to permit imaging of correlations between transverse and energy coordinates. This paper reviews the features and expected performance of the chicane. A companion paper discusses the physics design in detail.
Work supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Contract No. W-31-109-ENG-38.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
Design and Performance Simulations of the Bunch Compressor for the APS LEUTL FEL
Authors:
Michael Borland
Abstract:
A magnetic bunch compressor has been designed and is being commissioned for the APS linac to provide higher peak current for the LEUTL FEL. Of primary concern is control of emittance growth due to coherent synchrotron radiation (CSR). In addition, tolerances must be carefully evaluated in order to choose the most stable operating conditions and ensure that the system can meet operational goals.…
▽ More
A magnetic bunch compressor has been designed and is being commissioned for the APS linac to provide higher peak current for the LEUTL FEL. Of primary concern is control of emittance growth due to coherent synchrotron radiation (CSR). In addition, tolerances must be carefully evaluated in order to choose the most stable operating conditions and ensure that the system can meet operational goals. The computer code ELEGANT was used to design the bunch compressor, set tolerances, and simulate likely performance. This 6-D code includes a fast, simple simulation of CSR effects as well as longitudinal and transverse wakefields. It also is believed to be unique in allowing optimization of actual tracking results, such as bunch length, energy spread, and emittance. Automated setup and analysis of matching and tolerance simulations allowed consideration of numerous configurations without excessive effort. This permitted choosing configurations that reduce sensitivity to errors. Simulations indicate that emittance growth should be tolerable for up to 600 A peak current, for which the normalized emittance will increase from 5 to about 6.8 pi-um. The simulations also provide predictions of emittance variation with chicance parameters, which we hope to verify experimentally. * Work supported by the U.S. Department of Energy, Office of Basic
Energy Sciences, under Contract No. W-31-109-ENG-38.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
Automated Operation of the APS LINAC using the Procedure Execution Manager
Authors:
R. Soliday,
S. Pasky,
M. Borland
Abstract:
The Advanced Photon Source (APS) linear accelerator has two thermionic cathode rf guns and one photocathode rf gun. The thermionic guns are used primarily for APS operations while the photocathode gun is used as a free-electron laser (FEL) driver. With each gun requiring a different lattice and timing configuration, the need to change quickly between guns puts great demands on the accelerator op…
▽ More
The Advanced Photon Source (APS) linear accelerator has two thermionic cathode rf guns and one photocathode rf gun. The thermionic guns are used primarily for APS operations while the photocathode gun is used as a free-electron laser (FEL) driver. With each gun requiring a different lattice and timing configuration, the need to change quickly between guns puts great demands on the accelerator operators. Using the Procedure Execution Manager (PEM), a software environment for managing automated procedures, we have made start-up and switch-over of the linac systems both easier and more reliable. The PEM is a graphical user interface written in Tcl/Tk that permits the user to invoke "machine procedures" and control their execution. It allows construction of procedures in a hierarchical, parallel fashion, which makes for efficient execution and development. In this paper, we discuss the features and advantages of the PEM environment as well the specifics of our procedures for the APS linac.
△ Less
Submitted 16 August, 2000;
originally announced August 2000.
-
High-Brightness Beams from a Light Source Injector: The Advanced Photon Source Low-Energy Undulator Test Line Linac
Authors:
G. Travish,
S. Biedron,
M. Borland,
M. Hahne,
K. Harkay,
J. W. Lewellen,
A. Lumpkin,
S. Milton,
N. Sereno
Abstract:
The use of existing linacs, and in particular light source injectors, for free-electron laser (FEL) experiments is becoming more common due to the desire to test FELs at ever shorter wavelengths. The high-brightness, high-current beams required by high-gain FELs impose technical specifications that most existing linacs were not designed to meet. Moreover, the need for specialized diagnostics, es…
▽ More
The use of existing linacs, and in particular light source injectors, for free-electron laser (FEL) experiments is becoming more common due to the desire to test FELs at ever shorter wavelengths. The high-brightness, high-current beams required by high-gain FELs impose technical specifications that most existing linacs were not designed to meet. Moreover, the need for specialized diagnostics, especially shot-to-shot data acquisition, demands substantial modification and upgrade of conventional linacs. Improvements have been made to the Advanced Photon Source (APS) injector linac in order to produce and characterize high-brightness beams. Specifically, effort has been directed at generating beams suitable for use in the low-energy undulator test line (LEUTL) FEL in support of fourth-generation light source research. The enhancements to the linac technical and diagnostic capabilities that allowed for self-amplified spontaneous emission (SASE) operation of the FEL at 530 nm are described. Recent results, including details on technical systems improvements and electron beam measurement techniques, will be discussed. The linac is capable of accelerating beams to over 650 MeV. The nominal FEL beam parameters used are as follows: 217 MeV energy; 0.1-0.2% rms energy spread; 4-8 um normalized rms emittance; 80-120 A peak current from a 0.2-0.7 nC charge at a 2-7 ps FWHM bunch.
△ Less
Submitted 12 August, 2000;
originally announced August 2000.
