-
Deformable MRI Sequence Registration for AI-based Prostate Cancer Diagnosis
Authors:
Alessa Hering,
Sarah de Boer,
Anindo Saha,
Jasper J. Twilt,
Mattias P. Heinrich,
Derya Yakar,
Maarten de Rooij,
Henkjan Huisman,
Joeran S. Bosma
Abstract:
The PI-CAI (Prostate Imaging: Cancer AI) challenge led to expert-level diagnostic algorithms for clinically significant prostate cancer detection. The algorithms receive biparametric MRI scans as input, which consist of T2-weighted and diffusion-weighted scans. These scans can be misaligned due to multiple factors in the scanning process. Image registration can alleviate this issue by predicting t…
▽ More
The PI-CAI (Prostate Imaging: Cancer AI) challenge led to expert-level diagnostic algorithms for clinically significant prostate cancer detection. The algorithms receive biparametric MRI scans as input, which consist of T2-weighted and diffusion-weighted scans. These scans can be misaligned due to multiple factors in the scanning process. Image registration can alleviate this issue by predicting the deformation between the sequences. We investigate the effect of image registration on the diagnostic performance of AI-based prostate cancer diagnosis. First, the image registration algorithm, developed in MeVisLab, is analyzed using a dataset with paired lesion annotations. Second, the effect on diagnosis is evaluated by comparing case-level cancer diagnosis performance between using the original dataset, rigidly aligned diffusion-weighted scans, or deformably aligned diffusion-weighted scans. Rigid registration showed no improvement. Deformable registration demonstrated a substantial improvement in lesion overlap (+10% median Dice score) and a positive yet non-significant improvement in diagnostic performance (+0.3% AUROC, p=0.18). Our investigation shows that a substantial improvement in lesion alignment does not directly lead to a significant improvement in diagnostic performance. Qualitative analysis indicated that jointly developing image registration methods and diagnostic AI algorithms could enhance diagnostic accuracy and patient outcomes.
△ Less
Submitted 28 June, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Annotation-efficient cancer detection with report-guided lesion annotation for deep learning-based prostate cancer detection in bpMRI
Authors:
Joeran S. Bosma,
Anindo Saha,
Matin Hosseinzadeh,
Ilse Slootweg,
Maarten de Rooij,
Henkjan Huisman
Abstract:
Deep learning-based diagnostic performance increases with more annotated data, but large-scale manual annotations are expensive and labour-intensive. Experts evaluate diagnostic images during clinical routine, and write their findings in reports. Leveraging unlabelled exams paired with clinical reports could overcome the manual labelling bottleneck. We hypothesise that detection models can be trai…
▽ More
Deep learning-based diagnostic performance increases with more annotated data, but large-scale manual annotations are expensive and labour-intensive. Experts evaluate diagnostic images during clinical routine, and write their findings in reports. Leveraging unlabelled exams paired with clinical reports could overcome the manual labelling bottleneck. We hypothesise that detection models can be trained semi-supervised with automatic annotations generated using model predictions, guided by sparse information from clinical reports. To demonstrate efficacy, we train clinically significant prostate cancer (csPCa) segmentation models, where automatic annotations are guided by the number of clinically significant findings in the radiology reports. We included 7,756 prostate MRI examinations, of which 3,050 were manually annotated. We evaluated prostate cancer detection performance on 300 exams from an external centre with histopathology-confirmed ground truth. Semi-supervised training improved patient-based diagnostic area under the receiver operating characteristic curve from $87.2 \pm 0.8\%$ to $89.4 \pm 1.0\%$ ($P<10^{-4}$) and improved lesion-based sensitivity at one false positive per case from $76.4 \pm 3.8\%$ to $83.6 \pm 2.3\%$ ($P<10^{-4}$). Semi-supervised training was 14$\times$ more annotation-efficient for case-based performance and 6$\times$ more annotation-efficient for lesion-based performance. This improved performance demonstrates the feasibility of our training procedure. Source code is publicly available at github.com/DIAGNijmegen/Report-Guided-Annotation. Best csPCa detection algorithm is available at grand-challenge.org/algorithms/bpmri-cspca-detection-report-guided-annotations/.
△ Less
Submitted 19 February, 2022; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Fully Automatic Deep Learning Framework for Pancreatic Ductal Adenocarcinoma Detection on Computed Tomography
Authors:
Natália Alves,
Megan Schuurmans,
Geke Litjens,
Joeran S. Bosma,
John Hermans,
Henkjan Huisman
Abstract:
Early detection improves prognosis in pancreatic ductal adenocarcinoma (PDAC) but is challenging as lesions are often small and poorly defined on contrast-enhanced computed tomography scans (CE-CT). Deep learning can facilitate PDAC diagnosis, however current models still fail to identify small (<2cm) lesions. In this study, state-of-the-art deep learning models were used to develop an automatic f…
▽ More
Early detection improves prognosis in pancreatic ductal adenocarcinoma (PDAC) but is challenging as lesions are often small and poorly defined on contrast-enhanced computed tomography scans (CE-CT). Deep learning can facilitate PDAC diagnosis, however current models still fail to identify small (<2cm) lesions. In this study, state-of-the-art deep learning models were used to develop an automatic framework for PDAC detection, focusing on small lesions. Additionally, the impact of integrating surrounding anatomy was investigated. CE-CT scans from a cohort of 119 pathology-proven PDAC patients and a cohort of 123 patients without PDAC were used to train a nnUnet for automatic lesion detection and segmentation (nnUnet_T). Two additional nnUnets were trained to investigate the impact of anatomy integration: (1) segmenting the pancreas and tumor (nnUnet_TP), (2) segmenting the pancreas, tumor, and multiple surrounding anatomical structures (nnUnet_MS). An external, publicly available test set was used to compare the performance of the three networks. The nnUnet_MS achieved the best performance, with an area under the receiver operating characteristic curve of 0.91 for the whole test set and 0.88 for tumors <2cm, showing that state-of-the-art deep learning can detect small PDAC and benefits from anatomy information.
△ Less
Submitted 2 December, 2021; v1 submitted 30 November, 2021;
originally announced November 2021.
-
Smooth Implicit Hybrid Upwinding for Compositional Multiphase Flow in Porous Media
Authors:
Sebastian B. M. Bosma,
Francois P. Hamon,
Brad T. Mallison,
Hamdi A. Tchelepi
Abstract:
In subsurface multiphase flow simulations, poor nonlinear solver performance is a significant runtime sink. The system of fully implicit mass balance equations is highly nonlinear and often difficult to solve for the nonlinear solver, generally Newton(-Raphson). Strong nonlinearities can cause Newton iterations to converge very slowly. This frequently results in time step cuts, leading to computat…
▽ More
In subsurface multiphase flow simulations, poor nonlinear solver performance is a significant runtime sink. The system of fully implicit mass balance equations is highly nonlinear and often difficult to solve for the nonlinear solver, generally Newton(-Raphson). Strong nonlinearities can cause Newton iterations to converge very slowly. This frequently results in time step cuts, leading to computationally expensive simulations. Much literature has looked into how to improve the nonlinear solver through enhancements or safeguarding updates. In this work, we take a different approach; we aim to improve convergence with a smoother finite volume discretization scheme which is more suitable for the Newton solver.
Building on recent work, we propose a novel total velocity hybrid upwinding scheme with weighted average flow mobilities (WA-HU TV) that is unconditionally monotone and extends to compositional multiphase simulations. Analyzing the solution space of a one-cell problem, we demonstrate the improved properties of the scheme and explain how it leverages the advantages of both phase potential upwinding and arithmetic averaging. This results in a flow subproblem that is smooth with respect to changes in the sign of phase fluxes, and is well-behaved when phase velocities are large or when co-current viscous forces dominate. Additionally, we propose a WA-HU scheme with a total mass (WA-HU TM) formulation that includes phase densities in the weighted averaging.
The proposed WA-HU TV consistently outperforms existing schemes, yielding benefits from 5\% to over 50\% reduction in nonlinear iterations. The WA-HU TM scheme also shows promising results; in some cases leading to even more efficiency. However, WA-HU TM can occasionally also lead to convergence issues. Overall, based on the current results, we recommend the adoption of the WA-HU TV scheme as it is highly efficient and robust.
△ Less
Submitted 6 June, 2021;
originally announced June 2021.
-
Estimating Solar and Wind Power Production using Computer Vision Deep Learning Techniques on Weather Maps
Authors:
Sebastian Bosma,
Negar Nazari
Abstract:
Accurate renewable energy production forecasting has become a priority as the share of intermittent energy sources on the grid increases. Recent work has shown that convolutional deep learning models can successfully be applied to forecast weather maps. Building on this capability, we propose a ResNet-inspired model that estimates solar and wind power production based on weather maps. By capturing…
▽ More
Accurate renewable energy production forecasting has become a priority as the share of intermittent energy sources on the grid increases. Recent work has shown that convolutional deep learning models can successfully be applied to forecast weather maps. Building on this capability, we propose a ResNet-inspired model that estimates solar and wind power production based on weather maps. By capturing both spatial and temporal correlations using convolutional neural networks with stacked input frames, the model is designed to capture the complex dynamics governing these energy sources. A dataset that focuses on the state of California is constructed and made available as a secondary contribution of the work. We demonstrate that our novel model outperforms traditional deep learning techniques: it predicts an accurate power production profile that is smooth and includes high-frequency details.
△ Less
Submitted 21 January, 2022; v1 submitted 15 March, 2021;
originally announced March 2021.
-
DESHIMA on ASTE: On-sky Responsivity Calibration of the Integrated Superconducting Spectrometer
Authors:
Tatsuya Takekoshi,
Kenichi Karatsu,
Junya Suzuki,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Jochem J. A. Baselmans,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan
, et al. (14 additional authors not shown)
Abstract:
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope.…
▽ More
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip data taken under various precipitable water vapor (PWV, 0.4-3.0 mm) conditions for each MKID. The line-of-sight brightness temperature of sky is estimated using an atmospheric transmission model and the PWVs. As a result, we obtain an average temperature calibration uncertainty of $1σ=4$%, which is smaller than other photometric biases. In addition, the average forward efficiency of 0.88 in our responsivity model is consistent with the value expected from the geometrical support structure of the telescope. We also estimate line-of-sight PWVs of each skydip observation using the frequency response of MKIDs, and confirm the consistency with PWVs reported by the Atacama Large Millimeter/submillimeter Array.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Enhanced multiscale restriction-smoothed basis (MsRSB) preconditioning with applications to porous media flow and geomechanics
Authors:
Sebastian B. M. Bosma,
Sergey Klevtsov,
Olav Møyner,
Nicola Castelletto
Abstract:
A novel method to enable application of the Multiscale Restricted Smoothed Basis (MsRSB) method to non M-matrices is presented. The original MsRSB method is enhanced with a filtering strategy enforcing M-matrix properties to enable the robust application of MsRSB as a preconditioner. Through applications to porous media flow and linear elastic geomechanics, the method is proven to be effective for…
▽ More
A novel method to enable application of the Multiscale Restricted Smoothed Basis (MsRSB) method to non M-matrices is presented. The original MsRSB method is enhanced with a filtering strategy enforcing M-matrix properties to enable the robust application of MsRSB as a preconditioner. Through applications to porous media flow and linear elastic geomechanics, the method is proven to be effective for scalar and vector problems with multipoint finite volume (FV) and finite element (FE) discretization schemes, respectively. Realistic complex (un)structured two- and three-dimensional test cases are considered to illustrate the method's performance.
△ Less
Submitted 27 July, 2020; v1 submitted 14 December, 2019;
originally announced December 2019.
-
First light demonstration of the integrated superconducting spectrometer
Authors:
Akira Endo,
Kenichi Karatsu,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Tatsuya Takekoshi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan,
Shunichi Nakatsubo
, et al. (14 additional authors not shown)
Abstract:
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pix…
▽ More
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pixels (>$10^2$). Here we present the design and first astronomical spectra of an intrinsically scalable, integrated superconducting spectrometer, which covers 332-377 GHz with a spectral resolution of $F/ΔF \sim 380$. It combines the multiplexing advantage of microwave kinetic inductance detectors (MKIDs) with planar superconducting filters for dispersing the signal in a single, small superconducting integrated circuit. We demonstrate the two key applications for an instrument of this type: as an efficient redshift machine, and as a fast multi-line spectral mapper of extended areas. The line detection sensitivity is in excellent agreement with the instrument design and laboratory performance, reaching the atmospheric foreground photon noise limit on sky. The design can be scaled to bandwidths in excess of an octave, spectral resolution up to a few thousand and frequencies up to $\sim$1.1 THz. The miniature chip footprint of a few $\mathrm{cm^2}$ allows for compact multi-pixel spectral imagers, which would enable spectroscopic direct imaging and large volume spectroscopic surveys that are several orders of magnitude faster than what is currently possible.
△ Less
Submitted 18 September, 2019; v1 submitted 24 June, 2019;
originally announced June 2019.
-
Wideband on-chip terahertz spectrometer based on a superconducting filterbank
Authors:
Akira Endo,
Kenichi Karatsu,
Alejandro Pascual Laguna,
Behnam Mirzaei,
Robert Huiting,
David J. Thoen,
Vignesh Murugesan,
Stephen J. C. Yates,
Juan Bueno,
Nuri van Marrewijk,
Sjoerd Bosma,
Ozan Yurduseven,
Nuria Llombart,
Junya Suzuki,
Masato Naruse,
Pieter J. de Visser,
Paul P. van der Werf,
Teun M. Klapwijk,
Jochem J. A. Baselmans
Abstract:
Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinet…
▽ More
Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinetic inductance detector behind each filter. Using frequency division multiplexing, all detectors are read-out simultaneously creating a wide-band spectrometer with an instantaneous bandwidth of 45 GHz centered around 350 GHz. The spectrometer has a spectral resolution of $F/ΔF=380$ and reaches photon-noise limited sensitivity. We discuss the chip design and fabrication, as well as the system integration and testing. We confirm full system operation by the detection of an emission line spectrum of methanol gas. The proposed concept allows for spectroscopic radiation detection over large bandwidths and resolutions up to $F/ΔF\sim1000$, all using a chip area of a few $\mathrm{cm^2}$. This will allow the construction of medium resolution imaging spectrometers with unprecedented speed and sensitivity.
△ Less
Submitted 21 June, 2019; v1 submitted 21 January, 2019;
originally announced January 2019.
-
L4Fe2As2Te1-xO4-yFy (L = Pr, Sm, Gd): a layered oxypnictide superconductor with Tc up to 45 K
Authors:
S. Katrych,
A. Pisoni,
S. Bosma,
S. Weyeneth,
N. D. Zhigadlo,
R. Gaal,
J. Karpinski,
L. Forró
Abstract:
The synthesis, structural and physical properties of iron lanthanide oxypnictide superconductors, L4Fe2As2Te1-xO4 (L = Pr, Sm, Gd), with transition temperature at ~ 25 K are reported. Single crystals have been grown at high pressure using cubic anvil technique. The crystal structure consists of layers of L2O2 tetrahedra separated by alternating layers of chains of Te and of Fe2As2 tetrahedra: -L2O…
▽ More
The synthesis, structural and physical properties of iron lanthanide oxypnictide superconductors, L4Fe2As2Te1-xO4 (L = Pr, Sm, Gd), with transition temperature at ~ 25 K are reported. Single crystals have been grown at high pressure using cubic anvil technique. The crystal structure consists of layers of L2O2 tetrahedra separated by alternating layers of chains of Te and of Fe2As2 tetrahedra: -L2O2-Te-L2O2-Fe2As2-L2O2-Te-L2O2- (space group: I4/mmm, a ~ 4.0, c ~ 29.6 Å). Substitution of oxygen by fluorine increases the critical temperature, e.g. in Gd4Fe2As2Te1-xOyF4-y up to 45 K. Magnetic torque measurements reveal an anisotropy of the penetration depths of ~31.
△ Less
Submitted 18 December, 2013; v1 submitted 21 November, 2013;
originally announced November 2013.
-
High-pressure flux growth, structural, and superconducting properties of LnFeAsO (Ln = Pr, Nd, Sm) single crystals
Authors:
N. D. Zhigadlo,
S. Weyeneth,
S. Katrych,
P. J. W. Moll,
K. Rogacki,
S. Bosma,
R. Puzniak,
J. Karpinski,
B. Batlogg
Abstract:
Single crystals of the LnFeAsO (Ln1111, Ln = Pr, Nd, and Sm) family with lateral dimensions up to 1 mm were grown from NaAs and KAs flux at high pressure. The crystals are of good structural quality and become superconducting when O is partially substituted by F (PrFeAsO1-xFx and NdFeAsO1-xFx) or when Fe is substituted by Co (SmFe1-xCoxAsO). From magnetization measurements, we estimate the tempera…
▽ More
Single crystals of the LnFeAsO (Ln1111, Ln = Pr, Nd, and Sm) family with lateral dimensions up to 1 mm were grown from NaAs and KAs flux at high pressure. The crystals are of good structural quality and become superconducting when O is partially substituted by F (PrFeAsO1-xFx and NdFeAsO1-xFx) or when Fe is substituted by Co (SmFe1-xCoxAsO). From magnetization measurements, we estimate the temperature dependence and anisotropy of the upper critical field and the critical current density of underdoped PrFeAsO0.7F0.3 crystal with Tc = 25 K. Single crystals of SmFe1-xCoxAsO with maximal Tc up to 16.3 K for x = 0.08 were grown for the first time. From transport and magnetic measurements we estimate the critical fields and their anisotropy, and find these superconducting properties to be quite comparable to the ones in SmFeAsO1-xFx with a much higher Tc of = 50 K. The magnetically measured critical current densities are as high as 109 A/m2 at 2 K up to 7 T, with indication of the usual fishtail effect. The upper critical field estimated from resistivity measurements is anisotropic with slopes of -8.7 T/K (H // ab-plane) and -1.7 T/K (H // c-axis). This anisotropy (= 5) is similar to that in other Ln1111 crystals with various higher Tc s.
△ Less
Submitted 8 January, 2013; v1 submitted 30 August, 2012;
originally announced August 2012.
-
Superconductivity and magnetism in RbxFe2-ySe2: Impact of thermal treatment on mesoscopic phase separation
Authors:
S. Weyeneth,
M. Bendele,
F. von Rohr,
P. Dluzewski,
R. Puzniak,
A. Krzton-Maziopa,
S. Bosma,
Z. Guguchia,
R. Khasanov,
Z. Shermadini,
A. Amato,
E. Pomjakushina,
K. Conder,
A. Schilling,
H. Keller
Abstract:
An extended study of the superconducting and normal-state properties of various as-grown and post-annealed RbxFe2-ySe2 single crystals is presented. Magnetization experiments evidence that annealing of RbxFe2-ySe2 at 413 K, well below the onset of phase separation Tp=489 K, neither changes the magnetic nor the superconducting properties of the crystals. In addition, annealing at 563 K, well above…
▽ More
An extended study of the superconducting and normal-state properties of various as-grown and post-annealed RbxFe2-ySe2 single crystals is presented. Magnetization experiments evidence that annealing of RbxFe2-ySe2 at 413 K, well below the onset of phase separation Tp=489 K, neither changes the magnetic nor the superconducting properties of the crystals. In addition, annealing at 563 K, well above Tp, suppresses the superconducting transition temperature Tc and leads to an increase of the antiferromagnetic susceptibility accompanied by the creation of ferromagnetic impurity phases, which are developing with annealing time. However, annealing at T=488K=Tp increases Tc up to 33.3 K, sharpens the superconducting transition, increases the lower critical field, and strengthens the screening efficiency of the applied magnetic field. Resistivity measurements of the as-grown and optimally annealed samples reveal an increase of the upper critical field along both crystallographic directions as well as its anisotropy. Muon spin rotation and scanning transmission electron microscopy experiments suggest the coexistence of two phases below Tp: a magnetic majority phase of Rb2Fe4Se5 and a non-magnetic minority phase of Rb0.5Fe2Se2. Both microscopic techniques indicate that annealing the specimens just at Tp does not affect the volume fraction of the two phases, although the magnetic field distribution in the samples changes substantially. This suggests that the microstructure of the sample, caused by mesoscopic phase separation, is modified by annealing just at Tp, leading to an improvement of the superconducting properties of RbxFe2-ySe2 and an enhancement of Tc.
△ Less
Submitted 15 November, 2012; v1 submitted 23 August, 2012;
originally announced August 2012.
-
Vortex lock-in transition coinciding with the 3D to 2D crossover in YBa2Cu3O7
Authors:
S. Bosma,
S. Weyeneth,
R. Puzniak,
A. Erb,
H. Keller
Abstract:
A vortex lock-in transition was directly detected by torque magnetometry in an overdoped YBa2Cu3O7 single crystal of low anisotropy (\approx 7). The locked-in state was observed below the 3D to 2D crossover temperature Tcr = 76 K, independently of extrinsic pinning effects thanks to a high quality clean crystal and the use of a vortex shaking technique. The shape of the torque signal as a function…
▽ More
A vortex lock-in transition was directly detected by torque magnetometry in an overdoped YBa2Cu3O7 single crystal of low anisotropy (\approx 7). The locked-in state was observed below the 3D to 2D crossover temperature Tcr = 76 K, independently of extrinsic pinning effects thanks to a high quality clean crystal and the use of a vortex shaking technique. The shape of the torque signal as a function of the angle between the applied magnetic field and the crystallographic c-axis is in very good agreement with the model developped by Feinberg and Ettouhami [Int. J. Mod. Phys. B 7, 2085 (1993)] for quasi-2D superconductors, despite the low anisotropy of the material.
△ Less
Submitted 15 August, 2012;
originally announced August 2012.
-
Study of the mixed state of La_{1.83}Sr_{0.17}CuO_{4} by means of muon-spin rotation and magnetization experiments in a low magnetic field
Authors:
B. M. Wojek,
S. Weyeneth,
S. Bosma,
E. Pomjakushina,
R. Puzniak
Abstract:
Muon-spin rotation (muSR) experiments are often used to study the magnetic field distribution in type-II superconductors in the vortex state. Based on the determination of the magnetic penetration depth it is frequently speculated---also controversially---about the order-parameter symmetry of the studied superconductors. This article reports on a combined muSR and magnetization study of the mixed…
▽ More
Muon-spin rotation (muSR) experiments are often used to study the magnetic field distribution in type-II superconductors in the vortex state. Based on the determination of the magnetic penetration depth it is frequently speculated---also controversially---about the order-parameter symmetry of the studied superconductors. This article reports on a combined muSR and magnetization study of the mixed state in the cuprate high-temperature superconductor La_{1.83}Sr_{0.17}CuO_{4} in a low magnetic field of 20 mT applied along the c axis of a single crystal. The macroscopic magnetization measurements reveal substantial differences for various cooling procedures. Yet, indicated changes in the vortex dynamics between different temperature regions as well as the results of the microscopic muSR experiments are virtually independent of the employed cooling cycles. Additionally, it is found that the mean magnetic flux density, locally probed by the muons, strongly increases at low temperatures. This can possibly be explained by a non-random sampling of the spatial field distribution of the vortex lattice in this cuprate superconductor caused by intensified vortex pinning.
△ Less
Submitted 4 October, 2011; v1 submitted 25 September, 2011;
originally announced September 2011.
-
Magnetic-field tuned anisotropy in superconducting Rb(x)Fe(2-y)Se(2)
Authors:
S. Bosma,
R. Puzniak,
A. Krzton-Maziopa,
M. Bendele,
E. Pomjakushina,
K. Conder,
H. Keller,
S. Weyeneth
Abstract:
The anisotropic superconducting properties of a Rb(x)Fe(2-y)Se(2) single crystal with transition temperature 32 K were investigated by means of SQUID and torque magnetometry, probing the effective magnetic penetration depth and the magnetic penetration depth anisotropy. Interestingly, the anisotropy is found to be temperature independent in the superconducting state, but strongly field dependent.…
▽ More
The anisotropic superconducting properties of a Rb(x)Fe(2-y)Se(2) single crystal with transition temperature 32 K were investigated by means of SQUID and torque magnetometry, probing the effective magnetic penetration depth and the magnetic penetration depth anisotropy. Interestingly, the anisotropy is found to be temperature independent in the superconducting state, but strongly field dependent. This unusual anisotropic behavior, together with a large zero-temperature effective magnetic penetration depth is possibly related to a superconducting state heavily biased by the coexisting antiferromagnetic phase.
△ Less
Submitted 24 January, 2012; v1 submitted 7 September, 2011;
originally announced September 2011.
-
Study of the anisotropic magnetic order of the Eu sublattice in single crystals of EuFe_2-xCo_xAs_2 (x = 0, 0.2) by means of magnetization and magnetic torque
Authors:
Z. Guguchia,
S. Bosma,
S. Weyeneth,
A. Shengelaya,
R. Puzniak,
Z. Bukowski,
J. Karpinski,
H. Keller
Abstract:
Here, we present a combination of magnetization and magnetic torque experiments to investigate the magnetic orders in undoped EuFe2As2 and Co doped EuFe1.8Co0.2As2 single crystals. Although at low temperatures typical results for an antiferromagnetic (AFM) state in EuFe2As2 were found, our data strongly indicate the occurrence of a canted antiferromagnetic (C-AFM) order of the Eu2+ moments between…
▽ More
Here, we present a combination of magnetization and magnetic torque experiments to investigate the magnetic orders in undoped EuFe2As2 and Co doped EuFe1.8Co0.2As2 single crystals. Although at low temperatures typical results for an antiferromagnetic (AFM) state in EuFe2As2 were found, our data strongly indicate the occurrence of a canted antiferromagnetic (C-AFM) order of the Eu2+ moments between 17 K and 19 K, observed even in the lowest studied magnetic fields. However, unlike in the parent compound, no low-field and low-temperature AFM state of the Eu^2+ moments was observed in the doped EuFe1.8Co0.2As2. Only a C-AFM phase is present at low fields and low temperatures, with a reduced magnetic anisotropy as compared to the undoped system. We present and discuss for both, EuFe2As2 and EuFe1.8Co0.2As2, the experimentally deduced magnetic phase diagrams of the magnetic ordering of the Eu^2+ sublattice with respect to the temperature, the applied magnetic field, and its orientation to the crystallographic axes. It is likely that the magnetic coupling of the Eu and the Fe sublattice is strongly depending on Co doping, having detrimental influence on the magnetic phase diagrams as determined in this work. Their impact on the occurrence of superconductivity with higher Co doping is discussed.
△ Less
Submitted 21 November, 2011; v1 submitted 11 July, 2011;
originally announced July 2011.
-
Magnetic torque study of the temperature dependent anisotropy parameter in overdoped superconducting single-crystal YBa_2Cu_3O_7
Authors:
S. Bosma,
S. Weyeneth,
R. Puzniak,
A. Erb,
A. Schilling,
H. Keller
Abstract:
An overdoped YBa2Cu3O7 single crystal was studied by SQUID and torque magnetometry in order to investigate the temperature dependence of the anisotropy parameter close to the transition temperature T_c (0.87 T_c < T < T_c). Angle dependent torque measurements were performed and analyzed with the widely used Kogan model [Phys. Rev. B 38, 7049 (1988)] as well as with an extended model by Hao and Cle…
▽ More
An overdoped YBa2Cu3O7 single crystal was studied by SQUID and torque magnetometry in order to investigate the temperature dependence of the anisotropy parameter close to the transition temperature T_c (0.87 T_c < T < T_c). Angle dependent torque measurements were performed and analyzed with the widely used Kogan model [Phys. Rev. B 38, 7049 (1988)] as well as with an extended model by Hao and Clem [Phys. Rev. Lett. 67, 2371 (1991)], taking into account the influence of the vortex cores on the magnetization. Both approaches yield similar results, with an out-of-plane anisotropy parameter around 6.5 which slightly increases with decreasing temperature, and a temperature independent in-plane anisotropy parameter gamma_ab}= 1.12(5).
△ Less
Submitted 13 July, 2011; v1 submitted 15 February, 2011;
originally announced February 2011.