-
Optimization of Super-Directive Linear Arrays with Differential Evolution for High Realized Gain
Authors:
Ihsan Kanbaz,
Okan Yurduseven,
Michail Matthaiou
Abstract:
Due to the low impedance and high feeding currents, it is naturally challenging to design super-directive antenna arrays that perfectly match the feed line, and this becomes almost impossible as the number of elements increases. In this paper, we assert that it is crucial to consider the trade-off between directivity and overall efficiency (to achieve high realized gain) before employing super-dir…
▽ More
Due to the low impedance and high feeding currents, it is naturally challenging to design super-directive antenna arrays that perfectly match the feed line, and this becomes almost impossible as the number of elements increases. In this paper, we assert that it is crucial to consider the trade-off between directivity and overall efficiency (to achieve high realized gain) before employing super-directive arrays in real-world applications. Given this trade-off (high directivity and low mismatch for high realized gain), a 4-element dipole array (unit array) is optimized using the differential evolution (DE) algorithm. Then, the performance of the unit array in subarray configuration scenarios is analyzed. Finally, the obtained parameters are verified using the CST full-wave simulation software. The results clearly indicate that the proposed unit array is a strong candidate for dense array applications, particularly in the context of massive multiple-input multiple-output (MIMO), thanks to its notable high gain and efficiency.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Super-Directive Antenna Arrays: How Many Elements Do We Need?
Authors:
Ihsan Kanbaz,
Okan Yurduseven,
Michail Matthaiou
Abstract:
Super-directive antenna arrays have faced challenges in achieving high realized gains ever since their introduction in the academic literature. The primary challenges are high impedance mismatches and resistive losses, which become increasingly more dominant as the number of elements increases. Consequently, a critical limitation arises in determining the maximum number of elements that should be…
▽ More
Super-directive antenna arrays have faced challenges in achieving high realized gains ever since their introduction in the academic literature. The primary challenges are high impedance mismatches and resistive losses, which become increasingly more dominant as the number of elements increases. Consequently, a critical limitation arises in determining the maximum number of elements that should be utilized to achieve super-directivity, particularly within dense array configurations. This paper addresses precisely this issue through an optimization study to design a super-directive antenna array with a maximum number of elements. An iterative approach is employed to increase the array of elements while sustaining a satisfactory realized gain using the differential evolution (DE) algorithm. Thus, it is observed that super-directivity can be obtained in an array with a maximum of five elements. Our results indicate that the obtained unit array has a $67.20\%$ higher realized gain than a uniform linear array with conventional excitation. For these reasons, these results make the proposed architecture a strong candidate for applications that require densely packed arrays, particularly in the context of massive multiple-input multiple-output (MIMO).
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Hollow Rectangular Waveguide-fed Holographic Beamforming Antenna Additively Manufactured (3D Printed) with Conductive Polymer
Authors:
Insang Yoo,
Jonah Gollub,
Shengrong Ye,
Allen Gray,
Okan Yurduseven,
Manohar D. Deshpande,
David R. Smith
Abstract:
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verificatio…
▽ More
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verification, the designed antennas are fabricated using a desktop dual-extrusion fused filament 3D printer. The body of each antenna and its inner conducting surface are respectively printed using polylactic acid and biodegradable conductive polyester composite material (i.e., Electrifi), which is later deposited with a layer of copper on its surface to improve surface conductivity and reduce surface roughness. The beamforming performance of the fabricated antennas is confirmed via experiments. The 3D printed metasurface antennas using the proposed fabrication technique illustrate emerging capabilities in the rapid prototyping of complex electromagnetic structures.
△ Less
Submitted 30 August, 2022;
originally announced August 2022.
-
Optimizing Polarizability Distributions for Metasurface Apertures with Lorentzian-Constrained Radiators
Authors:
Patrick T. Bowen,
Michael Boyarsky,
Laura M. Pulido-Mancera,
David R. Smith,
Okan Yurduseven,
Mohsen Sazegar
Abstract:
We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach t…
▽ More
We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach to first obtain the necessary aperture fields, which can then be converted to a polarizability distribution using equivalence principles. To achieve this ideal distribution, the polarizability of each element would need to have unconstrained magnitude and phase; however, for a single, passive, metamaterial resonator the magnitude and phase of the effective polarizability are inextricably linked through the properties of the Lorentzian resonance, with the range of phase values restricted to a span of at most 180 degrees. Here, we introduce a family of mappings from the ideal to the available polarizability distributions, easily visualized by plotting both polarizabilities in the complex plane. Using one of these mappings it is possible to achieve highly optimized beam patterns from a metasurface antenna, despite the inherent resonator limitations. We introduce the mapping technique and provide several specific examples, with numerical simulations used to confirm the design approach.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Spatio-temporal analysis of electromagnetic field coherence in complex media
Authors:
Thomas Fromenteze,
Matthieu Davy,
Okan Yurduseven,
Yann Marie-Joseph,
Cyril Decroze
Abstract:
We study the coherence in time and space of electromagnetic fields propagated through complex media. Whether for localization, imaging or telecommunication, the development of dedicated numerical techniques is generally based on the exploitation of simplified models considering either coherent or diffuse fields. The optimization of such applications in conditions of partial coherence can therefore…
▽ More
We study the coherence in time and space of electromagnetic fields propagated through complex media. Whether for localization, imaging or telecommunication, the development of dedicated numerical techniques is generally based on the exploitation of simplified models considering either coherent or diffuse fields. The optimization of such applications in conditions of partial coherence can therefore be particularly challenging, requiring the development of hybrid algorithms adaptable to prior knowledge on the processed fields. The objective of this work is to provide numerical techniques for decomposing an electromagnetic field into subspaces that can then be filtered according to their level of spatial and temporal coherence. In contrast to the studies carried out on space-space transfer matrices notably used for the calculation of Wigner-Smith operators, these decompositions are carried out on space-time matrices in order to facilitate the study of temporal dispersion. The theory is developed for illustrative purposes using experimental results from a leaky resonant system but seem to be applicable to any scattering and reverberating media capable of transforming localized and coherent excitations into complex and diffuse distributions. To conclude this work, the proposed technique is exploited to improve image reconstruction in a millimeter-wave computational imaging demonstration. In the studied context and from a more general perspective, we propose a technique to select the most suitable subspaces for each application operating under conditions of partial coherence, whether these correspond in the most extreme cases to ballistic paths or to diffuse fields.
△ Less
Submitted 20 April, 2022; v1 submitted 16 February, 2022;
originally announced February 2022.
-
Smart Radio Environments
Authors:
Gabriele Gradoni,
Marco Di Renzo,
Ana Diaz-Rubio,
Sergei Tretyakov,
Christophe Caloz,
Zhen Peng,
Andrea Alu,
Geoffroy Lerosey,
Mathias Fink,
Vincenzo Galdi,
Tie Jun Cui,
Benjamin Frazier,
Steven Anlage,
Marco Salucci,
Andrea Massa,
Qiang Cheng,
Jinghe Wang,
Shi Jin,
Davide Dardari,
Nicolo Decarli,
Okan Yurduseven,
Michail Matthaiou,
Mitchell Kenney,
George Gordon,
Orestis Georgiou
, et al. (5 additional authors not shown)
Abstract:
This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures fo…
▽ More
This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures for future mobile communications networks towards 6G.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Graph Attention Network Based Single-Pixel Compressive Direction of Arrival Estimation
Authors:
Kürşat Tekbıyık,
Okan Yurduseven,
Güneş Karabulut Kurt
Abstract:
In this paper, we present a single-pixel compressive direction of arrival (DoA) estimation technique leveraging a graph attention network (GAT)-based deep-learning framework. The physical layer compression is achieved using a coded-aperture technique, probing the spectrum of far-field sources that are incident on the aperture using a set of spatio-temporally incoherent modes. This information is t…
▽ More
In this paper, we present a single-pixel compressive direction of arrival (DoA) estimation technique leveraging a graph attention network (GAT)-based deep-learning framework. The physical layer compression is achieved using a coded-aperture technique, probing the spectrum of far-field sources that are incident on the aperture using a set of spatio-temporally incoherent modes. This information is then encoded and compressed into the channel of the coded-aperture. The coded-aperture is based on a metasurface antenna design and it works as a receiver, exhibiting a single-channel and replacing the conventional multichannel raster scan-based solutions for DoA estimation. The GAT network enables the compressive DoA estimation framework to learn the DoA information directly from the measurements acquired using the coded-aperture. This step eliminates the need for an additional reconstruction step and significantly simplifies the processing layer to achieve DoA estimation. We show that the presented GAT integrated single-pixel radar framework can retrieve high fidelity DoA information even under relatively low signal-to-noise ratio (SNR) levels.
△ Less
Submitted 1 November, 2021; v1 submitted 12 September, 2021;
originally announced September 2021.
-
Intelligent Reflecting Surfaces with Spatial Modulation: An Electromagnetic Perspective
Authors:
Okan Yurduseven,
Stylianos D. Assimonis,
Michail Matthaiou
Abstract:
Electromagnetic wave control using the concept of a reflecting surface is first studied as a near-field and a far-field problem. Using a secondary source present in a wireless communication environment, such as a backscatter tag, it is possible to leverage the incoming radiation from the source as a reference-wave to synthesize the desired wavefront across the reflecting surface, radiating a field…
▽ More
Electromagnetic wave control using the concept of a reflecting surface is first studied as a near-field and a far-field problem. Using a secondary source present in a wireless communication environment, such as a backscatter tag, it is possible to leverage the incoming radiation from the source as a reference-wave to synthesize the desired wavefront across the reflecting surface, radiating a field of interest. In this geometry, the phase grating, which is synthesized using an array of sub-wavelength unit cells, is calculated by interacting the incident reference-wave and the desired wavefront, similar to a hologram. When illuminated by the reference-wave, the reflected wavefront from the calculated phase grating is guaranteed to constructively add in the direction of the desired radiation (beam-steering in the far-field) and also focus at the intended depth (beam-focusing in the radiative near-field). Leveraging a dynamic modulation mechanism in the context of an intelligent reflective surface (IRS) illuminated by a backscatter tag, later, we present that one can selectively focus and defocus at an arbitrarily positioned receiver within the 3D field of view of the reflecting surface. This enables the control of the amplitude of the radiated electric field at the receiver location, paving the way for a spatial modulation mechanism by means of reconfiguring the reflecting surface in a backscattered wireless communication environment. In addition to the phase modification approach on a unit cell level to reconfigure the aperture radiated wavefronts, we finally present a time varying IRS concept making use of a time-delay based approach relying on a delay adjustment between the reflection coefficients of the IRS' unit cell lattices.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
The Road to 6G: Ten Physical Layer Challenges for Communications Engineers
Authors:
Michail Matthaiou,
Okan Yurduseven,
Hien Quoc Ngo,
David Morales-Jimenez,
Simon L. Cotton,
Vincent F. Fusco
Abstract:
While the deployment of 5G cellular systems will continue well in to the next decade, much interest is already being generated towards technologies that will underlie its successor, 6G. Undeniably, 5G will have transformative impact on the way we live and communicate, yet, it is still far away from supporting the Internet-of-Everything (IoE), where upwards of a million devices per $\textrm{km}^3$…
▽ More
While the deployment of 5G cellular systems will continue well in to the next decade, much interest is already being generated towards technologies that will underlie its successor, 6G. Undeniably, 5G will have transformative impact on the way we live and communicate, yet, it is still far away from supporting the Internet-of-Everything (IoE), where upwards of a million devices per $\textrm{km}^3$ (both terrestrial and aerial) will require ubiquitous, reliable, low-latency connectivity. This article looks at some of the fundamental problems that pertain to key physical layer enablers for 6G. This includes highlighting challenges related to intelligent reflecting surfaces, cell-free massive MIMO and THz communications. Our analysis covers theoretical modeling challenges, hardware implementation issues and scalability among others. The article concludes by delineating the critical role of signal processing in the new era for wireless communications.
△ Less
Submitted 28 September, 2020; v1 submitted 15 April, 2020;
originally announced April 2020.
-
DESHIMA on ASTE: On-sky Responsivity Calibration of the Integrated Superconducting Spectrometer
Authors:
Tatsuya Takekoshi,
Kenichi Karatsu,
Junya Suzuki,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Jochem J. A. Baselmans,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan
, et al. (14 additional authors not shown)
Abstract:
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope.…
▽ More
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip data taken under various precipitable water vapor (PWV, 0.4-3.0 mm) conditions for each MKID. The line-of-sight brightness temperature of sky is estimated using an atmospheric transmission model and the PWVs. As a result, we obtain an average temperature calibration uncertainty of $1σ=4$%, which is smaller than other photometric biases. In addition, the average forward efficiency of 0.88 in our responsivity model is consistent with the value expected from the geometrical support structure of the telescope. We also estimate line-of-sight PWVs of each skydip observation using the frequency response of MKIDs, and confirm the consistency with PWVs reported by the Atacama Large Millimeter/submillimeter Array.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
An Ultra-Wideband Leaky Lens Antenna for Broadband Spectroscopic Imaging Applications
Authors:
Sebastian Hähnle,
Ozan Yurduseven,
Sven van Berkel,
Nuria Llombart,
Juan Bueno,
Stephen J. C. Yates,
Vignesh Murugesan,
David J. Thoen,
Andrea Neto,
Jochem J. A. Baselmans
Abstract:
We present the design, fabrication and characterisation of a broadband leaky lens antenna for broadband, spectroscopic imaging applications. The antenna is designed for operation in the 300-900 GHz band. We integrate the antenna directly into an Al-NbTiN hybrid MKID to measure the beam pattern and absolute coupling efficiency at three frequency bands centred around 350, 650 and 850 GHz, covering t…
▽ More
We present the design, fabrication and characterisation of a broadband leaky lens antenna for broadband, spectroscopic imaging applications. The antenna is designed for operation in the 300-900 GHz band. We integrate the antenna directly into an Al-NbTiN hybrid MKID to measure the beam pattern and absolute coupling efficiency at three frequency bands centred around 350, 650 and 850 GHz, covering the full antenna band. We find an aperture efficiency $η_{ap} \approx 0.4$ over the whole frequency band, limited by lens reflections. We find a good match with simulations for both the patterns and efficiency, demonstrating a 1:3 bandwidth in the sub-mm wavelength range for future on-chip spectrometers.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Indirect Microwave Holography and Through Wall Imaging
Authors:
Okan Yurduseven,
Michael Elsdon
Abstract:
In this paper, a review of indirect microwave holography for through-wall imaging is presented. Indirect microwave holography is an imaging technique, enabling the complex object scattered fields (amplitude and phase) to be mathematically recovered from intensity-only, scalar microwave measurements. By removing the requirement to use vector measurement equipment to directly measure the complex fie…
▽ More
In this paper, a review of indirect microwave holography for through-wall imaging is presented. Indirect microwave holography is an imaging technique, enabling the complex object scattered fields (amplitude and phase) to be mathematically recovered from intensity-only, scalar microwave measurements. By removing the requirement to use vector measurement equipment to directly measure the complex fields, indirect microwave holography significantly reduces the cost of the imaging system and simplifies the hardware implementation. The application of a back-propagation algorithm enables the reconstructed amplitude and phase images to be obtained at the plane of the concealed object. In order to demonstrate the validity of the reviewed approach, experimental work is carried out on a metallic gun concealed under a 5 cm thick plywood wall and it is demonstrated that the indirect microwave holographic TWI can produce good resolution amplitude and phase images when back-propagation is applied. TWI of a concealed dielectric box representing non-metallic ordnance is also performed to demonstrate the ability of the technique to reconstruct through-wall images of concealed dielectric objects. An investigation of the resolution characteristics of the system suggests diffraction limited resolution can be achieved.
△ Less
Submitted 25 August, 2019;
originally announced August 2019.
-
First light demonstration of the integrated superconducting spectrometer
Authors:
Akira Endo,
Kenichi Karatsu,
Yoichi Tamura,
Tai Oshima,
Akio Taniguchi,
Tatsuya Takekoshi,
Shin'ichiro Asayama,
Tom J. L. C. Bakx,
Sjoerd Bosma,
Juan Bueno,
Kah Wuy Chin,
Yasunori Fujii,
Kazuyuki Fujita,
Robert Huiting,
Soh Ikarashi,
Tsuyoshi Ishida,
Shun Ishii,
Ryohei Kawabe,
Teun M. Klapwijk,
Kotaro Kohno,
Akira Kouchi,
Nuria Llombart,
Jun Maekawa,
Vignesh Murugesan,
Shunichi Nakatsubo
, et al. (14 additional authors not shown)
Abstract:
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pix…
▽ More
Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pixels (>$10^2$). Here we present the design and first astronomical spectra of an intrinsically scalable, integrated superconducting spectrometer, which covers 332-377 GHz with a spectral resolution of $F/ΔF \sim 380$. It combines the multiplexing advantage of microwave kinetic inductance detectors (MKIDs) with planar superconducting filters for dispersing the signal in a single, small superconducting integrated circuit. We demonstrate the two key applications for an instrument of this type: as an efficient redshift machine, and as a fast multi-line spectral mapper of extended areas. The line detection sensitivity is in excellent agreement with the instrument design and laboratory performance, reaching the atmospheric foreground photon noise limit on sky. The design can be scaled to bandwidths in excess of an octave, spectral resolution up to a few thousand and frequencies up to $\sim$1.1 THz. The miniature chip footprint of a few $\mathrm{cm^2}$ allows for compact multi-pixel spectral imagers, which would enable spectroscopic direct imaging and large volume spectroscopic surveys that are several orders of magnitude faster than what is currently possible.
△ Less
Submitted 18 September, 2019; v1 submitted 24 June, 2019;
originally announced June 2019.
-
Wideband on-chip terahertz spectrometer based on a superconducting filterbank
Authors:
Akira Endo,
Kenichi Karatsu,
Alejandro Pascual Laguna,
Behnam Mirzaei,
Robert Huiting,
David J. Thoen,
Vignesh Murugesan,
Stephen J. C. Yates,
Juan Bueno,
Nuri van Marrewijk,
Sjoerd Bosma,
Ozan Yurduseven,
Nuria Llombart,
Junya Suzuki,
Masato Naruse,
Pieter J. de Visser,
Paul P. van der Werf,
Teun M. Klapwijk,
Jochem J. A. Baselmans
Abstract:
Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinet…
▽ More
Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinetic inductance detector behind each filter. Using frequency division multiplexing, all detectors are read-out simultaneously creating a wide-band spectrometer with an instantaneous bandwidth of 45 GHz centered around 350 GHz. The spectrometer has a spectral resolution of $F/ΔF=380$ and reaches photon-noise limited sensitivity. We discuss the chip design and fabrication, as well as the system integration and testing. We confirm full system operation by the detection of an emission line spectrum of methanol gas. The proposed concept allows for spectroscopic radiation detection over large bandwidths and resolutions up to $F/ΔF\sim1000$, all using a chip area of a few $\mathrm{cm^2}$. This will allow the construction of medium resolution imaging spectrometers with unprecedented speed and sensitivity.
△ Less
Submitted 21 June, 2019; v1 submitted 21 January, 2019;
originally announced January 2019.
-
Eliminating stray radiation inside large area imaging arrays
Authors:
Stephen J. C. Yates,
Simon Doyle,
Peter Barry,
Andrey M. Baryshev,
Juan Bueno,
Lorenza Ferrari,
Nuria Llombart,
Vignesh Murugesan,
David J. Thoen,
Ozan Yurduseven,
Jochem J. A. Baselmans
Abstract:
With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves. We demonstrate this effect with focal plane arrays of absorber coupled Lumped Element microwave Kinetic Inductance Detectors (LEKIDs) and lens-antenna coupled distributed quarter wavelength Microwave Kinetic Inductance Detectors (MKIDs). In these arrays the response from a poin…
▽ More
With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves. We demonstrate this effect with focal plane arrays of absorber coupled Lumped Element microwave Kinetic Inductance Detectors (LEKIDs) and lens-antenna coupled distributed quarter wavelength Microwave Kinetic Inductance Detectors (MKIDs). In these arrays the response from a point source at the pixel position is at a similar level to the stray response integrated over the entire chip area. For the antenna coupled arrays, we show that this effect can be suppressed by incorporating an on-chip stray light absorber. A similar method should be possible with the LEKID array, especially when they are lens coupled.
△ Less
Submitted 11 September, 2018;
originally announced September 2018.
-
3D Conductive Polymer Printed Metasurface Antenna for Fresnel Focusing
Authors:
Okan Yurduseven,
Shengrong Ye,
Thomas Fromenteze,
Daniel L. Marks,
Benjamin J. Wiley,
David R. Smith
Abstract:
We demonstrate a 3D printed holographic metasurface antenna for beam-focusing applications at 10 GHz within the X-band frequency regime. The metasurface antenna is printed using a dual-material 3D printer leveraging a biodegradable conductive polymer material (Electrifi) to print the conductive parts and polylactic acid (PLA) to print the dielectric substrate. The entire metasurface antenna is 3D…
▽ More
We demonstrate a 3D printed holographic metasurface antenna for beam-focusing applications at 10 GHz within the X-band frequency regime. The metasurface antenna is printed using a dual-material 3D printer leveraging a biodegradable conductive polymer material (Electrifi) to print the conductive parts and polylactic acid (PLA) to print the dielectric substrate. The entire metasurface antenna is 3D printed at once; no additional techniques, such as metal-plating and laser etching, are required. It is demonstrated that using the 3D printed conductive polymer metasurface antenna, high-fidelity beam focusing can be achieved within the Fresnel region of the antenna. It is also shown that the material conductivity for 3D printing has a substantial effect on the radiation characteristics of the metasurface antenna.
△ Less
Submitted 1 June, 2018;
originally announced June 2018.
-
Analysis of a Waveguide-Fed Metasurface Antenna
Authors:
David R. Smith,
Okan Yurduseven,
Laura Pulido Mancera,
Patrick Bowen,
Nathan B. Kundtz
Abstract:
The metasurface concept has emerged as an advantageous reconfigurable antenna architecture for beam forming and wavefront shaping, with applications that include satellite and terrestrial communications, radar, imaging, and wireless power transfer. The metasurface antenna consists of an array of metamaterial elements distributed over an electrically large structure, each subwavelength in dimension…
▽ More
The metasurface concept has emerged as an advantageous reconfigurable antenna architecture for beam forming and wavefront shaping, with applications that include satellite and terrestrial communications, radar, imaging, and wireless power transfer. The metasurface antenna consists of an array of metamaterial elements distributed over an electrically large structure, each subwavelength in dimension and with subwavelength separation between elements. In the antenna configuration we consider here, the metasurface is excited by the fields from an attached waveguide. Each metamaterial element can be modeled as a polarizable dipole that couples the waveguide mode to radiation modes. Distinct from the phased array and electronically scanned antenna (ESA) architectures, a dynamic metasurface antenna does not require active phase shifters and amplifiers, but rather achieves reconfigurability by shifting the resonance frequency of each individual metamaterial element. Here we derive the basic properties of a one-dimensional waveguide-fed metasurface antenna in the approximation that the metamaterial elements do not perturb the waveguide mode and are non-interacting. We derive analytical approximations for the array factors of the 1D antenna, including the effective polarizabilities needed for amplitude-only, phase-only, and binary constraints. Using full-wave numerical simulations, we confirm the analysis, modeling waveguides with slots or complementary metamaterial elements patterned into one of the surfaces.
△ Less
Submitted 4 November, 2017;
originally announced November 2017.
-
Computational polarimetric microwave imaging
Authors:
Thomas Fromenteze,
Okan Yurduseven,
Michael Boyarsky,
Jonah Gollub,
Daniel L. Marks,
David R. Smith
Abstract:
We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architec…
▽ More
We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architecture compared with active arrays and other conventional microwave imaging approaches. We further develop the theoretical framework for computational polarimetric imaging and validate the approach experimentally using a multi-modal leaky cavity. The scalar approximation for the interaction between the radiated waves and the target---often applied in microwave computational imaging schemes---is thus extended to retrieve the susceptibility tensors, and hence providing additional information about the targets. Computational polarimetry has relevance for existing systems in the field that extract polarimetric imagery, and particular for ground observation. A growing number of short-range microwave imaging applications can also notably benefit from computational polarimetry, particularly for imaging objects that are difficult to reconstruct when assuming scalar estimations.
△ Less
Submitted 4 October, 2017; v1 submitted 16 August, 2017;
originally announced August 2017.
-
Surface wave control for large arrays of microwave kinetic inductance detectors
Authors:
Stephen J. C. Yates,
Andrey M. Baryshev,
Ozan Yurduseven,
Juan Bueno,
Kristina K. Davis,
Lorenza Ferrari,
Willem Jellema,
Nuria Llombart,
Vignesh Murugesan,
David J. Thoen,
Jochem J. A. Baselmans
Abstract:
Large ultra-sensitive detector arrays are needed for present and future observatories for far infra-red, submillimeter wave (THz), and millimeter wave astronomy. With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves, the surface wave. We demonstrate this effect with focal plane arrays of 880 lens-antenna coupled Microwave Kinetic I…
▽ More
Large ultra-sensitive detector arrays are needed for present and future observatories for far infra-red, submillimeter wave (THz), and millimeter wave astronomy. With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves, the surface wave. We demonstrate this effect with focal plane arrays of 880 lens-antenna coupled Microwave Kinetic Inductance Detectors (MKIDs). Presented here are near field measurements of the MKID optical response versus the position on the array of a reimaged optical source. We demonstrate that the optical response of a detector in these arrays saturates off-pixel at the $\sim-30$ dB level compared to the peak pixel response. The result is that the power detected from a point source at the pixel position is almost identical to the stray response integrated over the chip area. With such a contribution, it would be impossible to measure extended sources, while the point source sensitivity is degraded due to an increase of the stray loading. However, we show that by incorporating an on-chip stray light absorber, the surface wave contribution is reduced by a factor $>$10. With the on-chip stray light absorber the point source response is close to simulations down to the $\sim-35$ dB level, the simulation based on an ideal Gaussian illumination of the optics. In addition, as a crosscheck we show that the extended source response of a single pixel in the array with the absorbing grid is in agreement with the integral of the point source measurements.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Computational Microwave Imaging Using 3D Printed Conductive Polymer Frequency-Diverse Metasurface Antennas
Authors:
Okan Yurduseven,
Patrick Flowers,
Shengrong Ye,
Daniel Marks,
Jonah Gollub,
Thomas Fromenteze,
Benjamin Wiley,
David Smith
Abstract:
A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid (PLA) polymer material and conductive polymer material (Electrifi), circumventing the requirement for expensive and time-consuming conventional fabrication tech…
▽ More
A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid (PLA) polymer material and conductive polymer material (Electrifi), circumventing the requirement for expensive and time-consuming conventional fabrication techniques, such as machine milling, photolithography and laser-etching. Using the 3D printed frequency- diverse metasurface antennas, a composite aperture is designed and simulated for imaging in the K-band frequency regime (17.5-26.5 GHz). The frequency-diverse system is capable of imaging by means of a simple frequency-sweep in an-all electronic manner, avoiding mechanical scanning and active circuit components. Using the synthesized system, microwave imaging of objects is achieved at the diffraction limit. It is also demonstrated that the conductivity of the Electrifi polymer material significantly affects the performance of the 3D printed antennas and therefore is a critical factor governing the fidelity of the reconstructed images.
△ Less
Submitted 6 April, 2017;
originally announced April 2017.
-
An Analysis of Beamed Wireless Power Transfer in the Fresnel Zone Using a Dynamic, Metasurface Aperture
Authors:
David R. Smith,
Vinay R. Gowda,
Okan Yurduseven,
Stephane Larouche,
Guy Lipworth,
Yaroslav Urzhumov,
Matthew S. Reynolds
Abstract:
Wireless power transfer (WPT) has been an active topic of research, with a number of WPT schemes implemented in the near-field (coupling) and far-field (radiation) regimes. Here, we consider a beamed WPT scheme based on a dynamically reconfigurable source aperture transferring power to receiving devices within the Fresnel (near-zone) region. In this context, the dynamic aperture resembles a reconf…
▽ More
Wireless power transfer (WPT) has been an active topic of research, with a number of WPT schemes implemented in the near-field (coupling) and far-field (radiation) regimes. Here, we consider a beamed WPT scheme based on a dynamically reconfigurable source aperture transferring power to receiving devices within the Fresnel (near-zone) region. In this context, the dynamic aperture resembles a reconfigurable lens capable of focusing power to a well-defined spot, whose dimension can be related to a point spread function (PSF). Near-zone focusing can be achieved by generating different amplitude or phase profiles over the aperture, which can be realized using traditional architectures, such as phased arrays. Alternatively, metasurface guided-wave apertures can achieve dynamic focusing, with potentially lower cost implementations. We present an initial tradeoff analysis of the near-zone WPT concept, relating key parameters such as spot size, aperture size, wavelength, focal distance, and availability of sources. We find that approximate design formulas derived from the Gaussian optics approximation provide useful estimates of system performance, including transfer efficiency and coverage volume. The accuracy of these formulas is confirmed using numerical calculations.
△ Less
Submitted 21 October, 2016;
originally announced October 2016.
-
A kilo-pixel imaging system for future space based far-infrared observatories using microwave kinetic inductance detectors
Authors:
J. J. A. Baselmans,
J. Bueno,
S. J. C. Yates,
O. Yurduseven,
N. Llombart,
K. Karatsu,
A. M. Baryshev,
L. Ferrari,
A. Endo,
D. J. Thoen,
P. J. de Visser,
R. M. J. Janssen,
V. Murugesan,
E. F. C. Driessen,
G. Coiffard,
J. Martin-Pintado,
P. Hargrave,
M. Griffin
Abstract:
Future astrophysics and cosmic microwave background space missions operating in the far-infrared to millimetre part of the spectrum will require very large arrays of ultra-sensitive detectors in combination with high multiplexing factors and efficient low-noise and low-power readout systems. We have developed a demonstrator system suitable for such applications. The system combines a 961 pixel ima…
▽ More
Future astrophysics and cosmic microwave background space missions operating in the far-infrared to millimetre part of the spectrum will require very large arrays of ultra-sensitive detectors in combination with high multiplexing factors and efficient low-noise and low-power readout systems. We have developed a demonstrator system suitable for such applications. The system combines a 961 pixel imaging array based upon Microwave Kinetic Inductance Detectors (MKIDs) with a readout system capable of reading out all pixels simultaneously with only one readout cable pair and a single cryogenic amplifier. We evaluate, in a representative environment, the system performance in terms of sensitivity, dynamic range, optical efficiency, cosmic ray rejection, pixel-pixel crosstalk and overall yield at at an observation centre frequency of 850 GHz and 20% fractional bandwidth. The overall system has an excellent sensitivity, with an average detector sensitivity NEPdet=3x10^-19 W/rt(Hz) measured using a thermal calibration source. At a loading power per pixel of 50fW we demonstrate white, photon noise limited detector noise down to 300 mHz. The dynamic range would allow the detection of 1 Jy bright sources within the field of view without tuning the readout of the detectors. The expected dead time due to cosmic ray interactions, when operated in an L2 or a similar far-Earth orbit, is found to be <4%. Additionally, the achieved pixel yield is 83% and the crosstalk between the pixels is <-30dB. This demonstrates that MKID technology can provide multiplexing ratios on the order of a 1000 with state-of-the-art single pixel performance, and that the technology is now mature enough to be considered for future space based observatories and experiments.
△ Less
Submitted 1 March, 2017; v1 submitted 7 September, 2016;
originally announced September 2016.