-
Excitation energies from state-specific ensemble density functionals with density-driven correlations
Authors:
Tim Gould,
Stephen G Dale,
Leeor Kronik,
Stefano Pittalis
Abstract:
We present an effective ensemble density functional approximation, which we call GX24 as it is suitable for both ground (G) and excited state (X) energy prediction. This functional is derived from first principles based on a novel approximation for density-driven correlations. We show that GX24 exploits recent advances in ensemble density functional theory to resolve major paradigmatic failures (d…
▽ More
We present an effective ensemble density functional approximation, which we call GX24 as it is suitable for both ground (G) and excited state (X) energy prediction. This functional is derived from first principles based on a novel approximation for density-driven correlations. We show that GX24 exploits recent advances in ensemble density functional theory to resolve major paradigmatic failures (double excitations, charge transfer) of standard time-dependent density functional approximations. It thus represents a major step toward accurate modelling of neutral and charged excitations in a unified fashion.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Superconducting Quantum Interference in Twisted van der Waals Heterostructures
Authors:
Liam S. Farrar,
Aimee Nevill,
Zhen Jieh Lim,
Geetha Balakrishnan,
Sara Dale,
Simon J. Bending
Abstract:
Modern Superconducting QUantum Interference Devices (SQUIDs) are commonly fabricated from either Al or Nb electrodes, with an in-situ oxidation process to create a weak link between them. However, common problems of such planar nano- and micro-SQUIDs are hysteretic current-voltage curves, and a shallow flux modulation depth. Here, we demonstrate the formation of both Josephson junctions and SQUIDs…
▽ More
Modern Superconducting QUantum Interference Devices (SQUIDs) are commonly fabricated from either Al or Nb electrodes, with an in-situ oxidation process to create a weak link between them. However, common problems of such planar nano- and micro-SQUIDs are hysteretic current-voltage curves, and a shallow flux modulation depth. Here, we demonstrate the formation of both Josephson junctions and SQUIDs using a dry transfer technique to stack and deterministically misalign flakes of NbSe$_{2}$; allowing one to overcome these issues. The Josephson dynamics of the resulting twisted NbSe$_{2}$-NbSe$_{2}$ junctions are found to be sensitive to the misalignment angle of the crystallographic axes. A single lithographic process was then implemented to shape the Josephson junction into a SQUID geometry with typical loop areas of $\simeq$ 25 $μm^{2}$ and weak links $\simeq$ 600 nm wide. These devices display large stable current and voltage modulation depths of up to $ΔI_{c} \simeq$ 75$\%$ and $ΔV \simeq$ 1.4 mV respectively.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
Electronic bandstructure and van der Waals coupling of ReSe2 revealed by high-resolution angle-resolved photoemission spectroscopy
Authors:
Lewis S Hart,
James L Webb,
Sara Dale,
Simon J. Bending,
Marcin Mucha-Kruczynski,
Daniel Wolverson,
Chaoyu Chen,
José Avila,
Maria C. Asensio
Abstract:
ReSe2 and ReS2 are unusual compounds amongst the layered transition metal dichalcogenides as a result of their low symmetry, with a characteristic in-plane anisotropy due to in-plane rhenium chains. They preserve inversion symmetry independent of the number of layers and, in contrast to more well-known transition metal dichalcogenides, bulk and few-monolayer Re-TMD compounds have been proposed to…
▽ More
ReSe2 and ReS2 are unusual compounds amongst the layered transition metal dichalcogenides as a result of their low symmetry, with a characteristic in-plane anisotropy due to in-plane rhenium chains. They preserve inversion symmetry independent of the number of layers and, in contrast to more well-known transition metal dichalcogenides, bulk and few-monolayer Re-TMD compounds have been proposed to behave as electronically and vibrational decoupled layers. Here, we probe for the first time the electronic band structure of bulk ReSe2 by direct nanoscale angle-resolved photoemission spectroscopy. We find a highly anisotropic in- and out-of-plane electronic structure, with the valence band maxima located away from any particular high-symmetry direction. The effective mass doubles its value perpendicular to the Re chains and the interlayer van der Waals coupling generates significant electronic dispersion normal to the layers. Our density functional theory calculations, including spin-orbit effects, are in excellent agreement with these experimental findings.
△ Less
Submitted 1 April, 2017;
originally announced April 2017.
-
Interdigitated ring electrodes: Theory and experiment
Authors:
Edward O. Barnes,
Ana Ferández-la-Villa,
Diego F. Pozo-Ayuso,
Mario Castaño-Alvarez,
Grace E. M. Lewis,
Sara E. C. Dale,
Frank Marken,
Richard G. Compton
Abstract:
The oxidation of potassium ferrocyanide, K_4Fe(CN)_6, in aqueous solution under fully supported conditions is carried out at interdigitated band and ring electrode arrays, and compared to theoretical models developed to simulate the processes. Simulated data is found to fit well with experimental results using literature values of diffusion coefficients for Fe(CN)_6^(4-) and Fe(CN)_6^(3-). The the…
▽ More
The oxidation of potassium ferrocyanide, K_4Fe(CN)_6, in aqueous solution under fully supported conditions is carried out at interdigitated band and ring electrode arrays, and compared to theoretical models developed to simulate the processes. Simulated data is found to fit well with experimental results using literature values of diffusion coefficients for Fe(CN)_6^(4-) and Fe(CN)_6^(3-). The theoretical models are used to compare responses from interdigitated band and ring arrays, and the size of ring array required to approximate the response to a linear band array is investigated. An equation is developed for the radius of ring required for a pair of electrodes in a ring array to give a result with 5% of a pair of electrodes in a band array. This equation is found to be independent of the scan rate used over six orders of magnitude.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
Dual Band Electrodes in Generator-Collector Mode: Simultaneous Measurement of Two Species
Authors:
Edward O. Barnes,
Grace E. M. Lewis,
Sara E. C. Dale,
Frank Marken,
Richard G. Compton
Abstract:
A computational model for the simulation of a double band collector-generator experiment is applied to the situation where two electrochemical reactions occur concurrently. It is shown that chronoamperometric measurements can be used to take advantage of differences in diffusion coefficients to measure the concentrations of both electroactive species simultaneously, by measuring the time at which…
▽ More
A computational model for the simulation of a double band collector-generator experiment is applied to the situation where two electrochemical reactions occur concurrently. It is shown that chronoamperometric measurements can be used to take advantage of differences in diffusion coefficients to measure the concentrations of both electroactive species simultaneously, by measuring the time at which the collection efficiency reaches a specific value. The separation of the electrodes is shown to not affect the sensitivity of the method (in terms of percentage changes in the measured time to reach the specified collection efficiency), but wider gaps can provide a greater range of (larger) absolute values of this characteristic time. It is also shown that measuring the time taken to reach smaller collection efficiencies can allow for the detection of smaller amounts of whichever species diffuses faster. The case of a system containing both ascorbic acid and opamine in water is used to exemplify the method, and it is shown that mole fractions of ascorbic acid between 0.055 and 0.96 can, in principle, be accurately measured.
△ Less
Submitted 19 June, 2013;
originally announced June 2013.
-
Virtual Compton Scattering and the Generalized Polarizabilities of the Proton at Q^2=0.92 and 1.76 GeV^2
Authors:
H. Fonvieille,
G. Laveissiere,
N. Degrande,
S. Jaminion,
C. Jutier,
L. Todor,
R. Di Salvo,
L. Van Hoorebeke,
L. C. Alexa,
B. D. Anderson,
K. A. Aniol,
K. Arundell,
G. Audit,
L. Auerbach,
F. T. Baker,
M. Baylac,
J. Berthot,
P. Y. Bertin,
W. Bertozzi,
L. Bimbot,
W. U. Boeglin,
E. J. Brash,
V. Breton,
H. Breuer,
E. Burtin
, et al. (139 additional authors not shown)
Abstract:
Virtual Compton Scattering (VCS) on the proton has been studied at Jefferson Lab using the exclusive photon electroproduction reaction (e p --> e p gamma). This paper gives a detailed account of the analysis which has led to the determination of the structure functions P_LL-P_TT/epsilon and P_LT, and the electric and magnetic generalized polarizabilities (GPs) alpha_E(Q^2) and beta_M(Q^2) at value…
▽ More
Virtual Compton Scattering (VCS) on the proton has been studied at Jefferson Lab using the exclusive photon electroproduction reaction (e p --> e p gamma). This paper gives a detailed account of the analysis which has led to the determination of the structure functions P_LL-P_TT/epsilon and P_LT, and the electric and magnetic generalized polarizabilities (GPs) alpha_E(Q^2) and beta_M(Q^2) at values of the four-momentum transfer squared Q^2= 0.92 and 1.76 GeV^2. These data, together with the results of VCS experiments at lower momenta, help building a coherent picture of the electric and magnetic GPs of the proton over the full measured Q^2-range, and point to their non-trivial behavior.
△ Less
Submitted 28 June, 2012; v1 submitted 15 May, 2012;
originally announced May 2012.
-
Measurements of Surface Diffusivity and Coarsening During Pulsed Laser Deposition
Authors:
J. D. Ferguson,
G. Arikan,
D. S. Dale,
A. R. Woll,
J. D. Brock
Abstract:
Pulsed Laser Deposition (PLD) of homoepitaxial SrTiO3 <001> was studied with in-situ x-ray specular reflectivity and surface diffuse x-ray scattering. Unlike prior reflectivity-based studies, these measurements access both the time- and the length-scales of the evolution of the surface morphology during growth. In particular, we show that this technique allows direct measurements of the diffusiv…
▽ More
Pulsed Laser Deposition (PLD) of homoepitaxial SrTiO3 <001> was studied with in-situ x-ray specular reflectivity and surface diffuse x-ray scattering. Unlike prior reflectivity-based studies, these measurements access both the time- and the length-scales of the evolution of the surface morphology during growth. In particular, we show that this technique allows direct measurements of the diffusivity for both inter- and intra-layer transport. Our results explicitly limit the possible role of island break-up, demonstrate the key roles played by nucleation and coarsening in PLD, and place an upper bound on the Ehrlich-Schwoebel (ES) barrier for downhill diffusion.
△ Less
Submitted 1 November, 2009; v1 submitted 19 October, 2009;
originally announced October 2009.
-
Theory of Fast Quantum Control of Exciton Dynamics in Semiconductor Quantum Dots
Authors:
C. Piermarocchi,
Pochung Chen,
Y. S. Dale,
L. J. Sham
Abstract:
Optical techniques for the quantum control of the dynamics of multiexciton states in a semiconductor quantum dot are explored in theory. Composite bichromatic phase-locked pulses are shown to reduce the time of elementary quantum operations on excitons and biexcitons by an order of magnitude or more. Analytic and numerical methods of designing the pulse sequences are investigated. Fidelity of th…
▽ More
Optical techniques for the quantum control of the dynamics of multiexciton states in a semiconductor quantum dot are explored in theory. Composite bichromatic phase-locked pulses are shown to reduce the time of elementary quantum operations on excitons and biexcitons by an order of magnitude or more. Analytic and numerical methods of designing the pulse sequences are investigated. Fidelity of the operation is used to gauge its quality. A modified Quantum Fourier Transform algorithm is constructed with only Rabi rotations and is shown to reduce the number of operations. Application of the designed pulses to the algorithm is tested by a numerical simulation.
△ Less
Submitted 13 September, 2001;
originally announced September 2001.
-
Electron Beam MØller Polarimeter at Jlab Hall a
Authors:
A. V. Glamazdin,
V. G. Gorbenko,
L. G. Levchuk,
R. I. Pomatsalyuk,
A. L. Rubashkin,
P. V. Sorokin,
D. S. Dale,
B. Doyle,
T. Gorringe,
W. Korsch,
V. Zeps,
J. P. Chen,
E. Chudakov,
S. Nanda,
A. Saha,
A. Gasparian
Abstract:
As part of the spin physics program at Jefferson Laboratory (JLab), a Møller polarimeter was developed to measure the polarization of electron beam of energies 0.8 to 5.0 GeV. A unique signature for Møller scattering is obtained using a series of three quadrupole magnets which provide an angular selection, and a dipole magnet for energy analysis. The design, commissioning, and the first results…
▽ More
As part of the spin physics program at Jefferson Laboratory (JLab), a Møller polarimeter was developed to measure the polarization of electron beam of energies 0.8 to 5.0 GeV. A unique signature for Møller scattering is obtained using a series of three quadrupole magnets which provide an angular selection, and a dipole magnet for energy analysis. The design, commissioning, and the first results of the polarization measurements of this polarimeter will be presented as well as future plans to use its small scattering angle capabilities to investigate physics in the very low $Q^2$ regime.
△ Less
Submitted 25 December, 1999;
originally announced December 1999.
