-
Thickness effect on superconducting properties of niobium films for radio-frequency cavity applications
Authors:
Antonio Bianchi,
Marco Bonura,
Carlota P. A. Carlos,
Stewart Leith,
Guillaume Rosaz,
Carmine Senatore,
Walter Venturini Delsolaro
Abstract:
Niobium-coated copper radio-frequency cavities are cost-effective alternatives to bulk niobium cavities, given the lower material costs of copper substrates and their operation in liquid helium at around 4.2 K. However, these cavities historically exhibited a gradual degradation in performance with the accelerating field. This phenomenon, not yet fully understood, limits the application of niobium…
▽ More
Niobium-coated copper radio-frequency cavities are cost-effective alternatives to bulk niobium cavities, given the lower material costs of copper substrates and their operation in liquid helium at around 4.2 K. However, these cavities historically exhibited a gradual degradation in performance with the accelerating field. This phenomenon, not yet fully understood, limits the application of niobium thin film cavities in accelerators where the real-estate gradient needs to be maximized. Recent studies on niobium films deposited on copper using high power impulse magnetron sputtering (HiPIMS) technique show promising results in mitigating the performance degradation of niobium thin film radio-frequency cavities. This paper examines the effect of film thickness on the superconducting properties of niobium films deposited on copper using HiPIMS. The study provides insights into how the critical temperature, transition width, lower and upper critical fields, and critical current density vary with the film thickness. Increasing the thickness of niobium films deposited through HiPIMS is found to enhance superconducting properties and reduce densities of defects and structural irregularities in the crystalline lattice. This shows potential for enhancing overall performance and potentially mitigating the observed performance degradation in niobium thin film radio-frequency cavities. Additionally, the Ivry's scaling relation among critical temperature, thickness, and sheet resistance at the normal state appears applicable to niobium films up to approximately 4 $μ$m. This extends the previously confirmed validity for niobium films, which was limited to around 300 nm thickness.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Temperature Mapping on a Niobium-Coated Copper Superconducting Radio-Frequency Cavity
Authors:
Antonio Bianchi,
Walter Venturini Delsolaro
Abstract:
Since the late '80s, CERN has pioneered the development of niobium thin film radio-frequency (RF) cavities deposited on copper substrates for several particle accelerator applications. However, niobium thin film cavities historically feature a progressive performance degradation as the accelerating field increases. In this study, we describe a temperature mapping system based on contact thermometr…
▽ More
Since the late '80s, CERN has pioneered the development of niobium thin film radio-frequency (RF) cavities deposited on copper substrates for several particle accelerator applications. However, niobium thin film cavities historically feature a progressive performance degradation as the accelerating field increases. In this study, we describe a temperature mapping system based on contact thermometry, specially designed to obtain temperature maps of niobium-coated copper cavities and, consequently, study the mechanisms responsible for performance degradation. The first temperature maps on a niobium/copper 1.3 GHz cavity are reported along with its RF performance. In addition to some hotspots displayed in the temperature maps, we surprisingly observed a wide cold area on the outer cavity surface that may shed new light on understanding the heat dissipation of niobium thin film cavities in liquid helium, which might be exploited to improve the RF cavity performance.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Temperature Measurement on Copper Surfaces for Superconducting Thin Film Cavity Applications
Authors:
Antonio Bianchi,
Giovanna Vandoni,
Walter Venturini Delsolaro
Abstract:
Superconducting radio-frequency (SRF) thin film cavities on copper substrates are employed in several particle accelerators. However, these SRF cavities historically featured a progressive performance degradation with the accelerating field that is still not completely understood. The degradation of cavity performance, which limits the use of this technology in accelerators where the real-estate g…
▽ More
Superconducting radio-frequency (SRF) thin film cavities on copper substrates are employed in several particle accelerators. However, these SRF cavities historically featured a progressive performance degradation with the accelerating field that is still not completely understood. The degradation of cavity performance, which limits the use of this technology in accelerators where the real-estate gradient has to be maximized, is manifested by the presence of heat losses in the superconducting film. However, measuring the temperature on the outer surface of copper substrates is challenging due to the higher thermal conductivity of copper at low temperatures compared to niobium. This study describes how temperature variations on copper surfaces can be satisfactorily measured in view of superconducting thin film cavity applications at liquid helium temperatures. Furthermore, we explore how the thermal exchange between thermometers and copper surfaces, and thermometers and helium bath must be tuned with respect to each other in order to measure accurately temperature rises in the thin film. Our findings suggest that engineering the copper surfaces can improve heat transfer into the helium bath and potentially enhance the performance of thin film SRF cavities.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Next-Generation Superconducting RF Technology based on Advanced Thin Film Technologies and Innovative Materials for Accelerator Enhanced Performance and Energy Reach
Authors:
A. - M. Valente-Feliciano,
C. Antoine,
S. Anlage,
G. Ciovati,
J. Delayen,
F. Gerigk,
A. Gurevich,
T. Junginger,
S. Keckert,
G. Keppe,
J. Knobloch,
T. Kubo,
O. Kugeler,
D. Manos,
C. Pira,
T. Proslier,
U. Pudasaini,
C. E. Reece,
R. A. Rimmer,
G. J. Rosaz,
T. Saeki,
R. Vaglio,
R. Valizadeh,
H. Vennekate,
W. Venturini Delsolaro
, et al. (3 additional authors not shown)
Abstract:
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generat…
▽ More
Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generation thin-film based cavities. Nb on Cu cavities are developed to perform as good as or better than bulk Nb at reduced cost and with better thermal stability. Recent results showing improved accelerating field and dramatically reduced Q slope show their potential for many applications. The second research thrust is to develop cavities coated with materials that can operate at higher temperatures or sustain higher fields. Proof of principle has been established for the merit of Nb3Sn for SRF application. Research is now needed to further exploit the material and reach its full potential with novel deposition techniques. The third line of research is to push SRF performance beyond the capabilities of the superconductors alone with multilayered coatings. In parallel, developments are needed to provide quality substrates, cooling schemes and cryomodule design tailored to thin film cavities. Recent results in these three research thrusts suggest that SRF thin film technologies are at the eve of a technological revolution. For them to mature, active community support and sustained funding are needed to address fundamental developments supporting material deposition techniques, surface and RF research, technical challenges associated with scaling and industrialization. With dedicated and sustained investment, next-generation thin-film based cavities will become a reality with high performance and efficiency, facilitating energy sustainable science while enabling higher luminosity, and higher energy.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Two different origins of the Q-slope problem in superconducting niobium film cavities for a heavy ion accelerator at CERN
Authors:
A. Miyazaki,
W. Venturini Delsolaro
Abstract:
Superconducting niobium film cavities deposited on copper substrates (Nb/Cu) have suffered from strong field-dependent surface resistance, often referred to as the Q-slope problem, since their invention. We argue that the Q-slope may not be an intrinsic problem, but rather originates from a combination of factors which can be revealed in appropriate environmental conditions. In this study, extrins…
▽ More
Superconducting niobium film cavities deposited on copper substrates (Nb/Cu) have suffered from strong field-dependent surface resistance, often referred to as the Q-slope problem, since their invention. We argue that the Q-slope may not be an intrinsic problem, but rather originates from a combination of factors which can be revealed in appropriate environmental conditions. In this study, extrinsic effects were carefully minimized in a series of experiments on a seamless cavity. The origin of the Q-slope in low frequency cavities is traced back to two contributions with different temperature and magnetic field dependences. The first component of Q-slope, affecting the residual resistance, is caused by trapped magnetic flux which is normally suppressed by a magnetic shield for bulk niobium cavities. The second, temperature dependent component of Q-slope, is similar to the medium-field Q-slope which is well known in bulk niobium cavities. These results are compared with theoretical models and possible future studies are proposed.
△ Less
Submitted 11 December, 2018;
originally announced December 2018.
-
Determination of the BCS material parameters of the HIE-ISOLDE superconducting resonator
Authors:
A. Miyazaki,
W. Venturini Delsolaro
Abstract:
Superconducting material parameters of the Nb film coating on the Quarter-Wave Resonator (QWR) for the HIE-ISOLDE project were studied by fitting experimental results with the Mattis-Bardeen theory. We pointed out a strong correlation among fitted estimators of material parameters in the BCS theory, and proposed a procedure to remove the correlation by simultaneously fitting the surface resistance…
▽ More
Superconducting material parameters of the Nb film coating on the Quarter-Wave Resonator (QWR) for the HIE-ISOLDE project were studied by fitting experimental results with the Mattis-Bardeen theory. We pointed out a strong correlation among fitted estimators of material parameters in the BCS theory, and proposed a procedure to remove the correlation by simultaneously fitting the surface resistance and effective penetration depth. Unlike previous studies, no literature values were assumed in the fitting. As surface resistance and penetration depth had a similar dependence on coherence length and mean free path, the correlation between these two parameters could not be eliminated by this fitting. The upper critical field measured by SQUID magnetometry showed complementary constraint to the RF result, and this allowed all the material parameters to be determined.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Status of the HIE-ISOLDE project at CERN
Authors:
M. A. Fraser,
Y. Kadi,
A. P. Bernardes,
Y. Blumenfeld,
E. Bravin,
S. Calatroni,
R. Catherall,
B. Goddard,
D. Parchet,
E. Siesling,
W. Venturini Delsolaro,
G. Vandoni,
D. Voulot,
L. R. Williams
Abstract:
The HIE-ISOLDE project represents a major upgrade of the ISOLDE nuclear facility with a mandate to significantly improve the quality and increase the intensity and energy of radioactive nuclear beams produced at CERN. The project will expand the experimental nuclear physics programme at ISOLDE by focusing on an upgrade of the existing Radioactive ion beam EXperiment (REX) linac with a 40 MV superc…
▽ More
The HIE-ISOLDE project represents a major upgrade of the ISOLDE nuclear facility with a mandate to significantly improve the quality and increase the intensity and energy of radioactive nuclear beams produced at CERN. The project will expand the experimental nuclear physics programme at ISOLDE by focusing on an upgrade of the existing Radioactive ion beam EXperiment (REX) linac with a 40 MV superconducting linac comprising thirty-two niobium-on-copper sputter-coated quarter-wave resonators housed in six cryomodules. The new linac will raise the energy of post-accelerated beams from 3 MeV/u to over 10 MeV/u. The upgrade will be staged to first deliver beam energies of 5.5 MeV/u using two high-$β$ cryomodules placed downstream of REX, before the energy variable section of the existing linac is replaced with two low-$β$ cryomodules and two additional high-$β$ cryomodules are installed to attain over 10 MeV/u with full energy variability above 0.45 MeV/u. An overview of the project including a status summary of the different R&D activities and the schedule will outlined.
△ Less
Submitted 17 July, 2017;
originally announced July 2017.
-
The Tuning System for the HIE-ISOLDE High-Beta Quarter Wave Resonator
Authors:
P. Zhang,
L. Alberty,
L. Arnaudon,
K. Artoos,
S. Calatroni,
O. Capatina,
A. D'Elia,
Y. Kadi,
I. Mondino,
T. Renaglia,
D. Valuch,
W. Venturini Delsolaro
Abstract:
A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is 101.28 MHz and they will provide 6 MV/m accelerating gradient on the beam axis with a total maximum power dissipation of 10 W on cavity walls. A tuning system is…
▽ More
A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is 101.28 MHz and they will provide 6 MV/m accelerating gradient on the beam axis with a total maximum power dissipation of 10 W on cavity walls. A tuning system is required in order to both minimize the forward power variation in beam operation and to compensate the unavoidable uncertainties in the frequency shift during the cool-down process. The tuning system has to fulfil a complex combination of RF, structural and thermal requirements. The paper presents the functional specifications and details the tuning system RF and mechanical design and simulations. The results of the tests performed on a prototype system are discussed and the industrialization strategy is presented in view of final production.
△ Less
Submitted 3 October, 2013;
originally announced October 2013.