-
Response to "Comment on 'A novel two-dimensional boron-carbon-nitride (BCN) monolayer: A first-principles insight [J. Appl. Phys. 2021, 130, 114301]'"
Authors:
Asadollah Bafekry,
Mosayeb Naseri,
Mohamed M. Fadlallah,
Ismaeil Abdolhosseini Sarsari,
Mehrdad faraji,
Abbas bagheri khatibani,
Mitra Ghergherehchi,
Daniela Gogova
Abstract:
Recently, reported a comments on the our paper [JAP21-AR-03574R].. For clarification, we applied the fingerprint theory to examine the similarity between the distinct structures. The fingerprint function is a crystal structure descriptor, an 1D-function related to the pair correlation function and diffraction patterns. It does not depend on absolute atomic coordinates, but only on interatomic dist…
▽ More
Recently, reported a comments on the our paper [JAP21-AR-03574R].. For clarification, we applied the fingerprint theory to examine the similarity between the distinct structures. The fingerprint function is a crystal structure descriptor, an 1D-function related to the pair correlation function and diffraction patterns. It does not depend on absolute atomic coordinates, but only on interatomic distances. Small deviations in atomic positions will influence the fingerprints only slightly [1-3]. Fingerprint theory allows quantification of the degree of order and complexity of a crystal structure.
△ Less
Submitted 14 August, 2023; v1 submitted 7 May, 2022;
originally announced May 2022.
-
Response to Comment on (Novel two-dimensional porous graphitic carbon nitride C6N7 monolayer: A First-principle calculations [Appl. Phys. Lett. 2021, 119, 142102])
Authors:
Asadollah Bafekry,
Mehrdad Faraji,
Mohamed M. Fadlallah,
I. Abdolhosseini Sarsari,
Hamad R. Jappor,
Sara Fazeli,
Mitra Ghergherehchi
Abstract:
Recently, reported a comments on the our paper [Appl. Phys. Lett. 119, 142102 (2021)]. With our response, the APL journal rejected their non scientific comments. There are some ambiguities about their claim: 1-They can check the phonon dispersion of their structure to see ZA out-of-plane mode. 2-They report the uniaxial stress-strain responses in Fig 2., which is unrelated to our paper. For a more…
▽ More
Recently, reported a comments on the our paper [Appl. Phys. Lett. 119, 142102 (2021)]. With our response, the APL journal rejected their non scientific comments. There are some ambiguities about their claim: 1-They can check the phonon dispersion of their structure to see ZA out-of-plane mode. 2-They report the uniaxial stress-strain responses in Fig 2., which is unrelated to our paper. For a more helpful understanding of the mechanical properties of the novel C6N7 monolayer, they can publish a paper. 3-They mentioned: Using the DFT method and with assuming a thickness of 3.35 A for the C6N7 monolayer based on graphene thickness. Why did they choose this thickness while we know our C6N7 monolayer is at without buckling? The distance of ZA out-of-plane movement of ions in C6N7 is different from Graphene.
△ Less
Submitted 14 August, 2023; v1 submitted 2 May, 2022;
originally announced May 2022.
-
Two-dimensional pentagonal material Penta-PdPSe: A first-principle study
Authors:
A. Bafekry,
M. M. Fadlallah,
M. Faraji,
A. Shafique,
H. R. Jappor,
I. Abdolhoseini Sarsari,
Yee Sin Ang,
M. Ghergherehchi
Abstract:
Low-symmetry Penta-PdPSe with intrinsic in-plane anisotropy synthesized successfully [(P. Li et al., Adv. Mater., 2102541, (2021)]. Motivated by this experimental discovery, we investigate the structural, mechanical, electronic, optical and thermoelectric properties of PdPSe monolayer via density functional theory calculations. The phonon dispersion, molecular dynamics simulation, the cohesive ene…
▽ More
Low-symmetry Penta-PdPSe with intrinsic in-plane anisotropy synthesized successfully [(P. Li et al., Adv. Mater., 2102541, (2021)]. Motivated by this experimental discovery, we investigate the structural, mechanical, electronic, optical and thermoelectric properties of PdPSe monolayer via density functional theory calculations. The phonon dispersion, molecular dynamics simulation, the cohesive energy mechanical properties of the penta-PdPSe monolayer is verified to confirm its stability. The phonon spectrum represents a striking gap between the high-frequency and the low-frequency optical branches and an out-of-plane flexure mode with a quadratic dispersion in the long-wavelength limit. The Poissons ratio indicates that penta-PdPSe is a brittle monolayer. The penda-PdPSe monolayer is an indirect semiconductor with bandgap of 1.40 (2.07) eV using PBE (HSE06) functional. Optical properties simulation suggests that PdPSe is capable of absorbing a substantial range of visible to ultraviolet light. Band alignment analysis also reveals the compatibility of PdPSe for water splitting photocatalysis application. By combining the electrical and thermal transport properties of PdPSe, we show that a high PF is achievable at room temperature, thus making PdPSe a candidate material for thermoelectric application. Our findings reveal the strong potential of penta-PdPSe monolayer for a wide array of applications, including optoelectronic, water splitting and thermoelectric device applications.
△ Less
Submitted 11 September, 2021; v1 submitted 8 September, 2021;
originally announced September 2021.
-
Biphenylene monolayer as a two-dimensional nonbenzenoid carbon allotrope: A first-principles study
Authors:
A. Bafekry,
M. Faraji,
M. M. Fadlallah,
H. R. Jappor,
S. Karbasizadeh,
M. Ghergherehchi,
D. Gogova
Abstract:
In a very recent accomplishment, the two-dimensional form of Biphenylene network (BPN) has been successfully fabricated [Fan et al., Science, 372, 852-856 (2021)]. Motivated by this exciting experimental result on 2D layered BPN structure, herein we perform detailed density functional theory-based first-principles calculations, for the first time, in order to gain insight into the structural, elec…
▽ More
In a very recent accomplishment, the two-dimensional form of Biphenylene network (BPN) has been successfully fabricated [Fan et al., Science, 372, 852-856 (2021)]. Motivated by this exciting experimental result on 2D layered BPN structure, herein we perform detailed density functional theory-based first-principles calculations, for the first time, in order to gain insight into the structural, electronic and optical properties of this promising nanomaterial. Our theoretica results reveal the BPN structure is constructed from three rings of tetragon, hexagon and octagon, meanwhile the electron localization function shows very strong bonds between the C atoms in the structure. The dynamical stability of BPN is verified via the phonon band dispersion calculations. The mechanical properties reveal the brittle behavior of BPN monolayer. The Youngs modulus has been computed as 0.1 TPa, which is smaller than the corresponding value of graphene, while the Poissons ratio determined to be 0.26 is larger than that of graphene. The band structure is evaluated to show the electronic features of the material; determining the BPN monolayer as metallic with a band gap of zero. The optical properties (real and imaginary parts of the dielectric function, and the absorption spectrum) uncover BPN as an insulator along the zz direction, while owning metallic properties in xx and yy directions. We anticipate that our discoveries will pave the way to the successful implementation of this new 2D allotrope of carbon in advanced nanoelectronics.
△ Less
Submitted 31 May, 2021;
originally announced May 2021.
-
MoSi2N4 single-layer: a novel two-dimensional material with outstanding mechanical, thermal, electronic, optical, and photocatalytic properties
Authors:
A. Bafekry,
M. Faraji,
Do M. Hoat,
M. M. Fadlallah,
M. Shahrokhi,
F. Shojaei,
D. Gogova,
M. Ghergherehchi
Abstract:
Very recently, the two-dimensional (2D) form of MoSi2N4 has been successfully fabricated [Hong et al., Sci. 369, 670 (2020)]. Motivated by theses recent experimental results, herein we investigate the structural, mechanical, thermal, electronic, optical and photocatalytic properties using hybrid density functional theory (HSE06-DFT). Phonon band dispersion calculations reveal the dynamical stabili…
▽ More
Very recently, the two-dimensional (2D) form of MoSi2N4 has been successfully fabricated [Hong et al., Sci. 369, 670 (2020)]. Motivated by theses recent experimental results, herein we investigate the structural, mechanical, thermal, electronic, optical and photocatalytic properties using hybrid density functional theory (HSE06-DFT). Phonon band dispersion calculations reveal the dynamical stability of MoSi2N4 monolayer structure. Furthermore, the mechanical study confirms the stability of MoSi2N4 monolayer. As compared to the corresponding value of graphene, we find the Youngs modulus decreases by 30% while the Poissons ratio increases by 30%. In addition, its work function is very similar to that of phosphorene and MoS2 monolayers. The electronic structure investigation shows the MoSi2N4 monolayer is an indirect bandgap semiconductor. We have determined the bandgap using the HSE06 (GGA) is 2.35 (1.79) eV, which is an overestimated (underestimated) value of the experimental bandgap (1.99 eV). The thermoelectric study shows a good thermoelectric performance of the MoSi2N4 monolayer with a figure of merit slightly larger than unity at high temperatures. The optical analysis using the RPA method constructed over HSE06 shows that the first absorption peak of the MoSi2N4 monolayer for in-plane polarization is located in the visible range of spectrum, i.e. it is a promising candidate for advancing optoelectronic nanodevices. The photocatalytic study indicates the MoSi2N4 monloayer can be a promising photocatalyst for water splitting as well as and CO2 reduction. In summary, the fascinating MoSi2N4 monloayer is a promising 2D material in many applications due to its unique physical properties.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Effect of pore-size disorder on the electronic properties of semiconducting graphene nanomeshes
Authors:
Sarah Gamal,
Mohamed M. Fadlallah,
Lobna M. Salah,
Ahmed A. Maarouf
Abstract:
Graphene nanomeshes (GNMs) are novel materials that recently raised a lot of interest. They are fabricated by forming a lattice of pores in graphene. Depending on the pore size and pore lattice constant, GNMs can be either semimetallic or semiconducting with a gap large enough (0.5 eV) to be considered for transistor applications. The fabrication process is bound to produce some structural disorde…
▽ More
Graphene nanomeshes (GNMs) are novel materials that recently raised a lot of interest. They are fabricated by forming a lattice of pores in graphene. Depending on the pore size and pore lattice constant, GNMs can be either semimetallic or semiconducting with a gap large enough (0.5 eV) to be considered for transistor applications. The fabrication process is bound to produce some structural disorder due to variations in pore sizes. Recent electronic transport measurements in GNM devices (ACS Appl. Mater. Interfaces 10, 10362, 2018) show a degradation of their bandgap in devices having pore-size disorder. It is therefore important to understand the effect of such variability on the electronic properties of semiconducting GNMs. In this work we use the density functional-based tight binding formalism to calculate the electronic properties of GNM structures with different pore sizes, pore densities, and with hydrogen and oxygen pore edge passivations. We find that structural disorder reduces the electronic gap and the carrier group velocity, which may interpret recent transport measurements in GNM devices. Furthermore the trend of the bandgap with structural disorder is not significantly affected by the change in pore edge passivation. Our results show that even with structural disorder, GNMs are still attractive from a transistor device perspective.
△ Less
Submitted 19 August, 2020;
originally announced August 2020.
-
Electronic and optical properties of metal-doped TiO$_2$ nanotubes: Spintronic and photocatalytic applications
Authors:
Mohamed M. Fadlallah,
Ulrich Eckern
Abstract:
Due to their characteristic geometry, TiO$_2$ nanotubes (TNTs), suitably doped by metal-substitution to enhance their photocatalytic properties, have a high potential for applications such as clean fuel production. In this context, we present a detailed investigation of the magnetic, electronic, and optical properties of transition-metal doped TNTs, based on hybrid density functional theory. In pa…
▽ More
Due to their characteristic geometry, TiO$_2$ nanotubes (TNTs), suitably doped by metal-substitution to enhance their photocatalytic properties, have a high potential for applications such as clean fuel production. In this context, we present a detailed investigation of the magnetic, electronic, and optical properties of transition-metal doped TNTs, based on hybrid density functional theory. In particular, we focus on the $3d$, the $4d$, as well as selected $5d$ transition-metal doped TNTs. Thereby, we are able to explain the enhanced optical activity and photocatalytic sensitivity observed in various experiments. We find, for example, that Cr- and W-doped TNTs can be employed for applications like water splitting and carbon dioxide reduction, and for spintronic devices. The best candidate for water splitting is Fe-doped TNT, in agreement with experimental observations. In addition, our findings provide valuable hints for future experimental studies of the ferromagnetic/spintronic behavior of metal-doped titania nanotubes.
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Cation mono- and co-doped anatase TiO$_2$ nanotubes: An {\em ab initio} investigation of electronic and optical properties
Authors:
Mohamed M. Fadlallah,
Ulrich Eckern
Abstract:
The structural, electronic, and optical properties of metal (Si, Ge, Sn, and Pb) mono- and co-doped anatase TiO$_{2}$ nanotubes are investigated, in order to elucidate their potential for photocatalytic applications. It is found that Si doped TiO$_{2}$ nanotubes are more stable than those doped with Ge, Sn, or Pb. All dopants lower the band gap, except the (Ge, Sn) co-doped structure, the decrease…
▽ More
The structural, electronic, and optical properties of metal (Si, Ge, Sn, and Pb) mono- and co-doped anatase TiO$_{2}$ nanotubes are investigated, in order to elucidate their potential for photocatalytic applications. It is found that Si doped TiO$_{2}$ nanotubes are more stable than those doped with Ge, Sn, or Pb. All dopants lower the band gap, except the (Ge, Sn) co-doped structure, the decrease depending on the concentration and the type of dopant. Correspondingly, a redshift in the optical properties for all kinds of dopings is obtained. Even though a Pb mono- and co-doped TiO$_{2}$ nanotube has the lowest band gap, these systems are not suitable for water splitting, due to the location of the conduction band edges, in contrast to Si, Ge, and Sn mono-doped TiO$_{2}$ nanotubes. On the other hand, co-doping of TiO$_{2}$ does not improve its photocatalytic properties. Our findings are consistent with recent experiments which show an enhancement of light absorption for Si and Sn doped TiO$_{2}$ nanotubes.
△ Less
Submitted 23 August, 2019; v1 submitted 25 February, 2017;
originally announced February 2017.
-
Doping of large-pore crown graphene nanomesh
Authors:
Mohamed S. Eldeeb,
Mohamed M. Fadlallah,
Glenn J. Martyna,
Ahmed A. Maarouf
Abstract:
Porous graphene structures, also termed graphene nanomeshes (GNMs), are garnering increasing interest due to their potential application to important technologies such as chemical sensing, ion-filtration, and nanoelectronics. Semiconducting GNMs designed to have fractional eV band gaps are good candidates for graphene-based electronics, provided that a mechanism for their stable and controlled dop…
▽ More
Porous graphene structures, also termed graphene nanomeshes (GNMs), are garnering increasing interest due to their potential application to important technologies such as chemical sensing, ion-filtration, and nanoelectronics. Semiconducting GNMs designed to have fractional eV band gaps are good candidates for graphene-based electronics, provided that a mechanism for their stable and controlled doping is developed. Recent work has shown that controlled passivation of the edges of subnanometer pores and subsequent doping by atoms or molecules gives rise to {\it p}- and {\it n}-doped GNM structures. However, these structures are difficult to fabricate at the nanoscale. Here, we use first principle calculations to study the effect of the pore size on the doping physics of GNM structures with larger pores that can potentially host more than a single dopant. We show that such doping mechanism is effective even for pores with relatively large radii. We also study the effect of the number of dopants per pore on doping stability. We find that stable rigid band {\it n}- and {\it p}-doping emerges in such structures even if the dopants form a nano-cluster in the pore - rigid band doping is achieved in all {\it n}- and {\it p}-doping studied. Such doped large-pore GNM structures have potential applications as field effect transistors, and as transparent conducting electrodes.
△ Less
Submitted 30 June, 2022; v1 submitted 3 December, 2016;
originally announced December 2016.
-
Unravelling the interplay of geometrical, magnetic and electronic properties of metal-doped graphene nanomeshes
Authors:
Mohamed M. Fadlallah,
Ahmed A. Maarouf,
Udo Schwingenschlögl,
Ulrich Eckern
Abstract:
Graphene nanomeshes (GNMs), formed by creating a superlattice of pores in graphene, possess rich physical and chemical properties. Many of these properties are determined by the pore geometry. In this work, we use first principles calculations to study the magnetic and electronic properties of metal-doped nitrogen-passivated GNMs. We find that the magnetic behaviour is dependent on the pore shape…
▽ More
Graphene nanomeshes (GNMs), formed by creating a superlattice of pores in graphene, possess rich physical and chemical properties. Many of these properties are determined by the pore geometry. In this work, we use first principles calculations to study the magnetic and electronic properties of metal-doped nitrogen-passivated GNMs. We find that the magnetic behaviour is dependent on the pore shape (trigonal vs. hexagonal) as dictated by the number of covalent bonds formed between the 3$d$ metal and the passivating N atoms. We also find that Cr and V doped trigonal-pore GNMs, and Ti doped GNMs are the most favourable for spintronic applications. The calculated magnetic properties of Fe-doped GNMs compare well with recent experimental observations. The studied systems are useful as spin filters and chemical sensors.
△ Less
Submitted 24 November, 2016; v1 submitted 9 November, 2016;
originally announced November 2016.
-
Defect engineering of the electronic transport through cuprous oxide interlayers
Authors:
Mohamed M. Fadlallah,
Ulrich Eckern,
Udo Schwingenschlögl
Abstract:
The electronic transport through Au-(Cu$_{2}$O)$_n$-Au junctions is investigated using first-principles calculations and the nonequilibrium Green's function method. The effect of varying the thickness (i.e., $n$) is studied as well as that of point defects and anion substitution. For all Cu$_{2}$O thicknesses the conductance is more enhanced by bulk-like (in contrast to near-interface) defects, wi…
▽ More
The electronic transport through Au-(Cu$_{2}$O)$_n$-Au junctions is investigated using first-principles calculations and the nonequilibrium Green's function method. The effect of varying the thickness (i.e., $n$) is studied as well as that of point defects and anion substitution. For all Cu$_{2}$O thicknesses the conductance is more enhanced by bulk-like (in contrast to near-interface) defects, with the exception of O vacancies and Cl substitutional defects. A similar transmission behavior results from Cu deficiency and N substitution, as well as from Cl substitution and N interstitials for thick Cu$_{2}$O junctions. In agreement with recent experimental observations, it is found that N and Cl doping enhances the conductance. A Frenkel defect, i.e., a superposition of an O interstitial and O substitutional defect, leads to a remarkably high conductance. From the analysis of the defect formation energies, Cu vacancies are found to be particularly stable, in agreement with earlier experimental and theoretical work.
△ Less
Submitted 13 May, 2016;
originally announced May 2016.
-
Adsorption of Sugars on Al- and Ga-doped Boron Nitride Surfaces: A Computational Study
Authors:
Ahmed A. Darwish,
Mohamed M. Fadlallah,
Ashraf Badawi,
Ahmed A. Maarouf
Abstract:
Molecular adsorption on surfaces is a key element for many applications, including sensing and catalysis. Non-invasive sugar sensing has been an active area of research due to its importance to diabetes care. The adsorption of sugars on a template surface study is at the heart of matter. Here, we study doped hexagonal boron nitride sheets ($h$-BNNs) as adsorbing and sensing template for glucose an…
▽ More
Molecular adsorption on surfaces is a key element for many applications, including sensing and catalysis. Non-invasive sugar sensing has been an active area of research due to its importance to diabetes care. The adsorption of sugars on a template surface study is at the heart of matter. Here, we study doped hexagonal boron nitride sheets ($h$-BNNs) as adsorbing and sensing template for glucose and glucosamine. Using first principles calculations, we find that the adsorption of glucose and glucosamine on $h$-BNNs is significantly enhanced by the substitutional doping of the sheet with Al and Ga. Including long range van der Waals corrections gives adsorption energies of about 2 eV. In addition to the charge transfer occurring between glucose and the Al/Ga-doped BN sheets, the adsorption alters the size of the band gap, allowing for optical detection of adsorption. We also find that Al-doped boron nitride sheet is better than Ga-nitride sheet to enhance the adsorption energy of glucose and glucosamine. The results of our work can be potentially utilized when designing support templates for glucose and glucosamine.
△ Less
Submitted 13 December, 2015;
originally announced December 2015.
-
Towards an efficient perovskite visible-light active photocatalyst
Authors:
M. M. Fadlallah,
T. J. H. Vlugt,
M. F. Shibl
Abstract:
The band gap of SrTiO$_{3}$ retards its photocatalytic application. Regardless narrowing the band gap of the anion doped SrTiO$_{3}$, the anion doping structures have low photoconversion efficiency. The co-cation dopings are used to modify the band gap and band edges positions of SrTiO$_{3}$ to enhance the photocatalyitic properties by extending the absorption to longer visible-light. Using densit…
▽ More
The band gap of SrTiO$_{3}$ retards its photocatalytic application. Regardless narrowing the band gap of the anion doped SrTiO$_{3}$, the anion doping structures have low photoconversion efficiency. The co-cation dopings are used to modify the band gap and band edges positions of SrTiO$_{3}$ to enhance the photocatalyitic properties by extending the absorption to longer visible-light. Using density functional calculations with the Heyd-Scuseria-Ernzerhof (HSE06) hybrid functional for exchange-correlation, the crystal and electronic structures as well as the optical properties of the mono and codped SrTiO$_{3}$ are investigated. The (Mo, Zn/Cd) and (Ta, Ga/In) codoped SrTiO$_{3}$ are explored in the way to retain the semiconductor characteristics of the latter. It is found that (Ta, Ga/In) codoping does not enhance the photocatalytic activity of SrTiO$_3$ due to its large band gap. Moreover, the position of the conduction band edge of the (Mo, Cd) monodoping impedes the photocatalytic efficiency. The obtained results indicate that (Mo, Zn) codoped SrTiO$_3$ can potentially improve the photocatalyitic activity.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Electronic transport properties of (fluorinated) metal phthalocyanine
Authors:
M. M. Fadlallah,
U. Eckern,
A. H. Romero,
U. Schwingenschlögl
Abstract:
The magnetic and transport properties of the metal phthalocyanine (MPc) and F$_{16}$MPc (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn and Ag) families of molecules in contact with S-Au wires are investigated by density functional theory within the local density approximation, including local electronic correlations on the central metal atom. The magnetic moments are found to be considerably modified…
▽ More
The magnetic and transport properties of the metal phthalocyanine (MPc) and F$_{16}$MPc (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn and Ag) families of molecules in contact with S-Au wires are investigated by density functional theory within the local density approximation, including local electronic correlations on the central metal atom. The magnetic moments are found to be considerably modified under fluorination. In addition, they do not depend exclusively on the configuration of the outer electronic shell of the central metal atom (as in isolated MPc and F$_{16}$MPc) but also on the interaction with the leads. Good agreement between the calculated conductance and experimental results is obtained. For M = Ag, a high spin filter efficiency and conductance is observed, giving rise to a potentially high sensitivity for chemical sensor applications.
△ Less
Submitted 27 November, 2015; v1 submitted 9 February, 2015;
originally announced February 2015.
-
Magnetic, electronic and vibrational properties of metal and fluorinated metal phthalocyanines
Authors:
O. I. Arillo-Flores,
M. M. Fadlallah,
C. Schuster,
U. Eckern,
A. H. Romero
Abstract:
The magnetic and electronic properties of metal phthalocyanines (MPc) and fluorinated metal phthalocyanines (F$_{16}$MPc) are studied by means of spin density functional theory (SDFT). Several metals (M) such as Ca, all first d-row transition metals and Ag are investigated. By considering different open shell transition metals it is possible to tune the electronic properties of MPc, in particular…
▽ More
The magnetic and electronic properties of metal phthalocyanines (MPc) and fluorinated metal phthalocyanines (F$_{16}$MPc) are studied by means of spin density functional theory (SDFT). Several metals (M) such as Ca, all first d-row transition metals and Ag are investigated. By considering different open shell transition metals it is possible to tune the electronic properties of MPc, in particular the electronic molecular gap and total magnetic moment. Besides assigning the structural and electronic properties of MPc and F$_{16}$MPc, the vibrational modes analysis of the ScPc\textendash ZnPc series have been studied and correlated to experimental measurements when available.
△ Less
Submitted 5 February, 2013;
originally announced February 2013.
-
Electronic transport calculations for rough interfaces in Al, Cu, Ag, and Au
Authors:
M. M. Fadlallah,
C. Schuster,
U. Schwingenschloegl,
T. Wunderlich,
S. Sanvito
Abstract:
We present results of electronic structure and transport calculations for metallic interfaces, based on density functional theory and the non-equilibrium Green's functions method. Starting from the electronic structure of smooth Al, Cu, Ag, and Au interfaces, we study the effects of different kinds of interface roughness on the transmission coefficient and the I-V characteristic. In particular,…
▽ More
We present results of electronic structure and transport calculations for metallic interfaces, based on density functional theory and the non-equilibrium Green's functions method. Starting from the electronic structure of smooth Al, Cu, Ag, and Au interfaces, we study the effects of different kinds of interface roughness on the transmission coefficient and the I-V characteristic. In particular, we compare prototypical interface distortions, including vacancies and metallic impurities.
△ Less
Submitted 6 May, 2009;
originally announced May 2009.
