-
Far-infrared line emission from the outer Galaxy cluster Gy 3-7 with SOFIA/FIFI-LS: Physical conditions and UV fields
Authors:
N. Le,
A. Karska,
M. Figueira,
M. Sewiło,
A. Mirocha,
Ch. Fischer,
M. Kaźmierczak-Barthel,
R. Klein,
M. Gawroński,
M. Koprowski,
K. Kowalczyk,
W. J. Fischer,
K. M. Menten,
F. Wyrowski,
C. König,
L. E. Kristensen
Abstract:
(abridged) Far-infrared (FIR) line emission provides key information about the gas cooling and heating due to shocks and UV radiation associated with the early stages of star formation. Gas cooling via FIR lines might, however, depend on metallicity. We aim to quantify the FIR line emission and determine the spatial distribution of the CO rotational temperature, ultraviolet (UV) radiation field, a…
▽ More
(abridged) Far-infrared (FIR) line emission provides key information about the gas cooling and heating due to shocks and UV radiation associated with the early stages of star formation. Gas cooling via FIR lines might, however, depend on metallicity. We aim to quantify the FIR line emission and determine the spatial distribution of the CO rotational temperature, ultraviolet (UV) radiation field, and H2 number density toward the embedded cluster Gy 3-7 in the CMa-l224 star-forming region, whose metallicity is expected to be intermediate between that of the LMC and the Solar neighborhood. By comparing the total luminosities of CO and [O I] toward Gy 3-7 with values found for low- and high-mass protostars extending over a broad range of metallicities, we also aim to identify the possible effects of metallicity on the FIR line cooling within our Galaxy. We studied SOFIA/FIFI-LS spectra of Gy 3-7 covering several FIR lines. The spatial extent of CO high-J (J>14) emission resembles that of the elongated 160 um continuum emission detected with Herschel. The CO transitions from J=14-13 to J=16-15 are detected throughout the cluster and show a median rotational temperature of 170+/-30 K on Boltzmann diagrams. Comparisons to other protostars observed with Herschel show a good agreement with intermediate-mass sources in the inner Galaxy. Assuming an origin of the [O I] and high-J CO emission in UV-irradiated C-shocks, we obtained pre-shock H2 number densities of 10^4-5 cm-3 and UV radiation field strengths of 0.1-10 Habing fields. Far-IR line observations reveal ongoing star formation in Gy 3-7, dominated by intermediate-mass Class 0/I young stellar objects. The ratio of molecular-to-atomic far-IR line emission shows a decreasing trend with bolometric luminosities of the protostars. However, it does not indicate that the low-metallicity has an impact on the line cooling in Gy 3-7.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Lessons in VCR Repair: Compliance of Android App Developers with the California Consumer Privacy Act (CCPA)
Authors:
Nikita Samarin,
Shayna Kothari,
Zaina Siyed,
Oscar Bjorkman,
Reena Yuan,
Primal Wijesekera,
Noura Alomar,
Jordan Fischer,
Chris Hoofnagle,
Serge Egelman
Abstract:
The California Consumer Privacy Act (CCPA) provides California residents with a range of enhanced privacy protections and rights. Our research investigated the extent to which Android app developers comply with the provisions of the CCPA that require them to provide consumers with accurate privacy notices and respond to "verifiable consumer requests" (VCRs) by disclosing personal information that…
▽ More
The California Consumer Privacy Act (CCPA) provides California residents with a range of enhanced privacy protections and rights. Our research investigated the extent to which Android app developers comply with the provisions of the CCPA that require them to provide consumers with accurate privacy notices and respond to "verifiable consumer requests" (VCRs) by disclosing personal information that they have collected, used, or shared about consumers for a business or commercial purpose. We compared the actual network traffic of 109 apps that we believe must comply with the CCPA to the data that apps state they collect in their privacy policies and the data contained in responses to "right to know" requests that we submitted to the app's developers. Of the 69 app developers who substantively replied to our requests, all but one provided specific pieces of personal data (as opposed to only categorical information). However, a significant percentage of apps collected information that was not disclosed, including identifiers (55 apps, 80%), geolocation data (21 apps, 30%), and sensory data (18 apps, 26%) among other categories. We discuss improvements to the CCPA that could help app developers comply with "right to know" requests and other related regulations.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Density fluctuations in weakly interacting particle systems via the Dean-Kawasaki equation
Authors:
Federico Cornalba,
Julian Fischer,
Jonas Ingmanns,
Claudia Raithel
Abstract:
The Dean-Kawasaki equation - one of the most fundamental SPDEs of fluctuating hydrodynamics - has been proposed as a model for density fluctuations in weakly interacting particle systems. In its original form it is highly singular and fails to be renormalizable even by approaches such as regularity structures and paracontrolled distributions, hindering mathematical approaches to its rigorous justi…
▽ More
The Dean-Kawasaki equation - one of the most fundamental SPDEs of fluctuating hydrodynamics - has been proposed as a model for density fluctuations in weakly interacting particle systems. In its original form it is highly singular and fails to be renormalizable even by approaches such as regularity structures and paracontrolled distributions, hindering mathematical approaches to its rigorous justification. It has been understood recently that it is natural to introduce a suitable regularization, e.g., by applying a formal spatial discretization or by truncating high-frequency noise.
In the present work, we prove that a regularization in form of a formal discretization of the Dean-Kawasaki equation indeed accurately describes density fluctuations in systems of weakly interacting diffusing particles: We show that in suitable weak metrics, the law of fluctuations as predicted by the discretized Dean-Kawasaki SPDE approximates the law of fluctuations of the original particle system, up to an error that is of arbitrarily high order in the inverse particle number and a discretization error. In particular, the Dean-Kawasaki equation provides a means for efficient and accurate simulations of density fluctuations in weakly interacting particle systems.
△ Less
Submitted 21 November, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Demographics of Protoplanetary Disks: A Simulated Population of Edge-on Systems
Authors:
Isabel Angelo,
Gaspard Duchêne,
Karl Stapelfeldt,
Zoie Telkamp,
Francoise Ménard,
Deborah Padgett,
Gerrit van der Plas,
Marion Villenave,
Christophe Pinte,
Schuyler Wolff,
William J. Fischer,
Marshall D. Perrin
Abstract:
The structure of protoplanetary disks plays an essential role in planet formation. Disks that are highly inclined, or ''edge-on'', are of particular interest since their geometry provides a unique opportunity to study the disk's vertical structure and radial extent. Candidate edge-on protoplanetary disks are typically identified via their unique spectral energy distribution and subsequently confir…
▽ More
The structure of protoplanetary disks plays an essential role in planet formation. Disks that are highly inclined, or ''edge-on'', are of particular interest since their geometry provides a unique opportunity to study the disk's vertical structure and radial extent. Candidate edge-on protoplanetary disks are typically identified via their unique spectral energy distribution and subsequently confirmed through high-resolution imaging. However, this selection process is likely biased toward the largest, most massive disks, and the resulting sample may not accurately represent the underlying disk population. To investigate this, we generated a grid of protoplanetary disk models using radiative transfer simulations and determined which sets of disk parameters produce edge-on systems that could be recovered by aforementioned detection techniques--i.e., identified by their spectral energy distribution and confirmed through follow-up imaging with HST. In doing so, we adopt a quantitative working definition of "edge-on disks" that is observation-driven and agnostic about the disk inclination or other properties. Folding in empirical disk demographics, we predict an occurrence rate of 6.2% for edge-on disks and quantify biases towards highly inclined, massive disks. We also find that edge-on disks are under-represented in samples of Spitzer-studied young stellar objects, particularly for disks with M $\lesssim$ 0.5 $M_\odot$. Overall, our analysis suggests that several dozen edge-on disks remain undiscovered in nearby star-forming regions, and provides a universal selection process to identify edge-on disks for consistent, population-level demographic studies.
△ Less
Submitted 14 March, 2023; v1 submitted 9 February, 2023;
originally announced February 2023.
-
Simultaneous direct measurement of the electrocaloric and dielectric dynamics of ferroelectrics with microsecond temporal resolution
Authors:
J. Fischer,
J. Döntgen,
C. Molin,
S. E. Gebhardt,
Y. Hambal,
V. V. Shvartsman,
D. C. Lupascu,
D. Hägele,
J. Rudolph
Abstract:
A contactless technique for direct time-resolved measurements of the full dynamics of the adiabatic temperature change in electrocaloric materials is introduced. The infrared radiation emitted by the electrocaloric sample is sensitively detected with $μ$s time resolution and mK temperature resolution. We present time-resolved measurements of the electrocaloric effect up to kHz frequencies of the d…
▽ More
A contactless technique for direct time-resolved measurements of the full dynamics of the adiabatic temperature change in electrocaloric materials is introduced. The infrared radiation emitted by the electrocaloric sample is sensitively detected with $μ$s time resolution and mK temperature resolution. We present time-resolved measurements of the electrocaloric effect up to kHz frequencies of the driving electric field and down to small field strengths. The simultaneous recording of transients for applied electric field and induced polarization gives a comprehensive view on the correlation of electrocaloric and ferroelectric properties. The technique can further be applied to the continuous measurement of fatigue for $> 10^6$ electric field cycles.
△ Less
Submitted 18 April, 2023; v1 submitted 5 February, 2023;
originally announced February 2023.
-
Preserving local densities in low-dimensional embeddings
Authors:
Jonas Fischer,
Rebekka Burkholz,
Jilles Vreeken
Abstract:
Low-dimensional embeddings and visualizations are an indispensable tool for analysis of high-dimensional data. State-of-the-art methods, such as tSNE and UMAP, excel in unveiling local structures hidden in high-dimensional data and are therefore routinely applied in standard analysis pipelines in biology. We show, however, that these methods fail to reconstruct local properties, such as relative d…
▽ More
Low-dimensional embeddings and visualizations are an indispensable tool for analysis of high-dimensional data. State-of-the-art methods, such as tSNE and UMAP, excel in unveiling local structures hidden in high-dimensional data and are therefore routinely applied in standard analysis pipelines in biology. We show, however, that these methods fail to reconstruct local properties, such as relative differences in densities (Fig. 1) and that apparent differences in cluster size can arise from computational artifact caused by differing sample sizes (Fig. 2). Providing a theoretical analysis of this issue, we then suggest dtSNE, which approximately conserves local densities. In an extensive study on synthetic benchmark and real world data comparing against five state-of-the-art methods, we empirically show that dtSNE provides similar global reconstruction, but yields much more accurate depictions of local distances and relative densities.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
Sliding Window String Indexing in Streams
Authors:
Philip Bille,
Johannes Fischer,
Inge Li Gørtz,
Max Rishøj Pedersen,
Tord Joakim Stordalen
Abstract:
Given a string $S$ over an alphabet $Σ$, the 'string indexing problem' is to preprocess $S$ to subsequently support efficient pattern matching queries, i.e., given a pattern string $P$ report all the occurrences of $P$ in $S$. In this paper we study the 'streaming sliding window string indexing problem'. Here the string $S$ arrives as a stream, one character at a time, and the goal is to maintain…
▽ More
Given a string $S$ over an alphabet $Σ$, the 'string indexing problem' is to preprocess $S$ to subsequently support efficient pattern matching queries, i.e., given a pattern string $P$ report all the occurrences of $P$ in $S$. In this paper we study the 'streaming sliding window string indexing problem'. Here the string $S$ arrives as a stream, one character at a time, and the goal is to maintain an index of the last $w$ characters, called the 'window', for a specified parameter $w$. At any point in time a pattern matching query for a pattern $P$ may arrive, also streamed one character at a time, and all occurrences of $P$ within the current window must be returned. The streaming sliding window string indexing problem naturally captures scenarios where we want to index the most recent data (i.e. the window) of a stream while supporting efficient pattern matching.
Our main result is a simple $O(w)$ space data structure that uses $O(\log w)$ time with high probability to process each character from both the input string $S$ and the pattern string $P$. Reporting each occurrence from $P$ uses additional constant time per reported occurrence. Compared to previous work in similar scenarios this result is the first to achieve an efficient worst-case time per character from the input stream. We also consider a delayed variant of the problem, where a query may be answered at any point within the next $δ$ characters that arrive from either stream. We present an $O(w + δ)$ space data structure for this problem that improves the above time bounds to $O(\log(w/δ))$. In particular, for a delay of $δ= εw$ we obtain an $O(w)$ space data structure with constant time processing per character. The key idea to achieve our result is a novel and simple hierarchical structure of suffix trees of independent interest, inspired by the classic log-structured merge trees.
△ Less
Submitted 23 January, 2023;
originally announced January 2023.
-
An MCMC sampling of densest $k$-sub-graphs of regular graphs with connected complement graph
Authors:
Jens Walter Fischer
Abstract:
We present an exclusion process based approach for sampling densest $k$-sub-graphs from regular graphs $L$ with connected complement. By interpreting an exclusion process as a Markov chain on a corresponding Token Graph $\mathfrak{L}_k$, we make use of classical Markov chain theory to obtain quantitative bounds on the convergence speed depending on the geometry of $L$, which are sharp in the sens…
▽ More
We present an exclusion process based approach for sampling densest $k$-sub-graphs from regular graphs $L$ with connected complement. By interpreting an exclusion process as a Markov chain on a corresponding Token Graph $\mathfrak{L}_k$, we make use of classical Markov chain theory to obtain quantitative bounds on the convergence speed depending on the geometry of $L$, which are sharp in the sens that variations in the valency lead to an equality, which is $1$, for the geometric bounds in the case of a complete graph. We propose an algorithm which makes use of this particle view to avoid excessive memory use due to the state space size and discuss the regularity and connectivity condition on $L$ and $L^c$ in the Outlook.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Lyman-alpha Scattering Models Trace Accretion and Outflow Kinematics in T Tauri Systems
Authors:
Nicole Arulanantham,
Max Gronke,
Eleonora Fiorellino,
Jorge Filipe Gameiro,
Antonio Frasca,
Joel Green,
Seok-Jun Chang,
Rik A. B. Claes,
Catherine C. Espaillat,
Kevin France,
Gregory J. Herczeg,
Carlo F. Manara,
Laura Venuti,
Péter Ábrahám,
Richard Alexander,
Jerome Bouvier,
Justyn Campbell-White,
Jochen Eislöffel,
William J. Fischer,
Ágnes Kóspál,
Miguel Vioque
Abstract:
T Tauri stars produce broad Lyman-alpha emission lines that contribute $\sim$88% of the total UV flux incident on the inner circumstellar disks. Lyman-alpha photons are generated at the accretion shocks and in the protostellar chromospheres and must travel through accretion flows, winds and jets, the protoplanetary disks, and the interstellar medium before reaching the observer. This trajectory pr…
▽ More
T Tauri stars produce broad Lyman-alpha emission lines that contribute $\sim$88% of the total UV flux incident on the inner circumstellar disks. Lyman-alpha photons are generated at the accretion shocks and in the protostellar chromospheres and must travel through accretion flows, winds and jets, the protoplanetary disks, and the interstellar medium before reaching the observer. This trajectory produces asymmetric, double-peaked features that carry kinematic and opacity signatures of the disk environments. To understand the link between the evolution of Lyman-alpha emission lines and the disks themselves, we model HST-COS spectra from targets included in Data Release 3 of the Hubble UV Legacy Library of Young Stars as Essential Standards (ULLYSES) program. We find that resonant scattering in a simple spherical expanding shell is able to reproduce the high velocity emission line wings, providing estimates of the average velocities within the bulk intervening H I. The model velocities are significantly correlated with the K band veiling, indicating a turnover from Lyman-alpha profiles absorbed by outflowing winds to emission lines suppressed by accretion flows as the hot inner disk is depleted. Just 30% of targets in our sample have profiles with red-shifted absorption from accretion flows, many of which have resolved dust gaps. At this stage, Lyman-alpha photons may no longer intersect with disk winds along the path to the observer. Our results point to a significant evolution of Lyman-alpha irradiation within the gas disks over time, which may lead to chemical differences that are observable with ALMA and JWST.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
On the connectivity and diameter of Token graphs from a vertex induced sub-graph perspective
Authors:
Jens Walter Fischer
Abstract:
Token graphs, or symmetric powers of graphs, see \cite{alavi2002survey} and \cite{Fabila-Monroy2012}, are defined on the $k$-combinations of the vertex set of some graph $L$, where edges exist between two such combinations, if their symmetric difference corresponds to an edge in the underlying graph $L$. It has been noted, for example in \cite{AUDENAERT200774}, that these graphs constitute an inhe…
▽ More
Token graphs, or symmetric powers of graphs, see \cite{alavi2002survey} and \cite{Fabila-Monroy2012}, are defined on the $k$-combinations of the vertex set of some graph $L$, where edges exist between two such combinations, if their symmetric difference corresponds to an edge in the underlying graph $L$. It has been noted, for example in \cite{AUDENAERT200774}, that these graphs constitute an inherent correspondence between the relationships between random walks and graph invariants, and particle systems and higher order graph properties, employing in particular the structure of vertex induced sub-graphs. In this work, we contribute to this perspective, by giving a synthetic perspective on the vertex connectivity of token graphs, which equals its minimal degree, as well as on their diameter, if the underlying graph $L$ has diameter $2$. Some combinatorial results on the clique-Johnson graph link between $L$ and its token graph are proven as well.
△ Less
Submitted 13 July, 2023; v1 submitted 30 December, 2022;
originally announced December 2022.
-
Local minimizers of the interface length functional based on a concept of local paired calibrations
Authors:
Julian Fischer,
Sebastian Hensel,
Tim Laux,
Theresa M. Simon
Abstract:
We establish that regular flat partitions are locally minimizing for the interface energy with respect to $L^1$ perturbations of the phases. Regular flat partitions are partitions of open sets in $\mathbb{R}^2$ whose network of interfaces consists of finitely many straight segments with a singular set made up of finitely many triple junctions at which the Herring angle condition is satisfied. This…
▽ More
We establish that regular flat partitions are locally minimizing for the interface energy with respect to $L^1$ perturbations of the phases. Regular flat partitions are partitions of open sets in $\mathbb{R}^2$ whose network of interfaces consists of finitely many straight segments with a singular set made up of finitely many triple junctions at which the Herring angle condition is satisfied. This result not only holds for the case of the perimeter functional but for a general class of surface tension matrices. Our proof relies on a localized version of the paired calibration method which was introduced by Lawlor and Morgan (Pac. J. Appl. Math., 166(1), 1994) in conjunction with a relative energy functional that precisely captures the suboptimality of classical calibration estimates. Vice versa, we show that any stationary point of the length functional (in a sense of metric spaces) has to be a regular flat partition.
△ Less
Submitted 21 February, 2023; v1 submitted 22 December, 2022;
originally announced December 2022.
-
Recognition and reconstruction of cell differentiation patterns with deep learning
Authors:
Robin Dirk,
Jonas L. Fischer,
Simon Schardt,
Markus J. Ankenbrand,
Sabine C. Fischer
Abstract:
Cell lineage decisions occur in three-dimensional spatial patterns that are difficult to identify by eye. There is an ongoing effort to replicate such patterns using mathematical modeling. One approach uses long ranging cell-cell communication to replicate common spatial arrangements like checkerboard and engulfing patterns. In this model, the cell-cell communication has been implemented as a sign…
▽ More
Cell lineage decisions occur in three-dimensional spatial patterns that are difficult to identify by eye. There is an ongoing effort to replicate such patterns using mathematical modeling. One approach uses long ranging cell-cell communication to replicate common spatial arrangements like checkerboard and engulfing patterns. In this model, the cell-cell communication has been implemented as a signal that disperses throughout the tissue. On the other hand, machine learning models have been developed for pattern recognition and pattern reconstruction tasks. We combined synthetic data generated by the mathematical model with deep learning algorithms to recognize and reconstruct spatial cell fate patterns in organoids of mouse embryonic stem cells. A graph neural network was developed and trained on synthetic data from the model. Application to in vitro data predicted a low signal dispersion value. To test this result, we implemented a multilayer perceptron for the prediction of a given cell fate based on the fates of the neighboring cells. The results show a 70% accuracy of cell fate reconstruction based on the nine nearest neighbors of a cell. Overall, our approach combines deep learning with mathematical modeling to link cell fate patterns with potential underlying mechanisms.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Boosting Extra-functional Code Reusability in Cyber-physical Production Systems: The Error Handling Case Study
Authors:
Birgit Vogel-Heuser,
Juliane Fischer,
Dieter Hess,
Eva-Maria Neumann,
Marcus Wuerr
Abstract:
Cyber-Physical Production Systems (CPPS) are long-living and mechatronic systems, which include mechanics, electrics/electronics and software. The interdisciplinary nature combined with challenges and trends in the context of Industry 4.0 such as a high degree of customization, small lot sizes and evolution cause a high amount of variability. Mastering the variability of functional control softwar…
▽ More
Cyber-Physical Production Systems (CPPS) are long-living and mechatronic systems, which include mechanics, electrics/electronics and software. The interdisciplinary nature combined with challenges and trends in the context of Industry 4.0 such as a high degree of customization, small lot sizes and evolution cause a high amount of variability. Mastering the variability of functional control software, e.g., different control variants of an actuator type, is itself a challenge in developing and reusing CPPS software. This task becomes even more complex when considering extra-functional software such as operating modes, diagnosis and error handling. These software parts have high interdependencies with functional software, often involving the human-machine interface (HMI) to enable the intervention of operators. This paper illustrates the challenges in documenting the dependencies of these software parts including their variability using family models. A procedural and an object-oriented concept for implementing error handling, which represents an extra-functional task with high dependencies to functional software and the HMI, are proposed. The suitability of both concepts to increase the software's reusability and, thus, its flexibility in the context of Industry 4.0 is discussed. Their comparison confirms the high potential of the object-oriented extension of IEC 61131-3 to handle planned reuse of extra-functional CPPS software successfully.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
MICOSE4aPS: Industrially Applicable Maturity Metric to Improve Systematic Reuse of Control Software
Authors:
Birgit Vogel-Heuser,
Eva-Maria Neumann,
Juliane Fischer
Abstract:
automated Production Systems (aPS) are highly complex, mechatronic systems that usually have to operate reliably for many decades. Standardization and reuse of control software modules is a core prerequisite to achieve the required system quality in increasingly shorter development cycles. However, industrial case studies in the field of aPS show that many aPS companies still struggle with strateg…
▽ More
automated Production Systems (aPS) are highly complex, mechatronic systems that usually have to operate reliably for many decades. Standardization and reuse of control software modules is a core prerequisite to achieve the required system quality in increasingly shorter development cycles. However, industrial case studies in the field of aPS show that many aPS companies still struggle with strategically reusing software. This paper proposes a metric-based approach to objectively measure the maturity of industrial IEC 61131-based control software in aPS (MICOSE4aPS) to identify potential weaknesses and quality issues hampering systematic reuse. Module developers in the machine and plant manufacturing industry can directly benefit as the metric calculation is integrated into the software engineering workflow. An in-depth industrial evaluation in a top-ranked machine manufacturing company in food packaging and an expert evaluation with different companies confirmed the benefit to efficiently manage the quality of control software.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Design, Application and Evaluation of a Multi Agent System in the Logistics Domain
Authors:
Juliane Fischer,
Christian Lieberoth-Leden,
Johannes Fottner,
Birgit Vogel-Heuser
Abstract:
The increasing demand for flexibility of automated production systems also affects the automated material flow systems (aMFS) they contain and demands reconfigurable systems. However, the centralized control concept usually applied in aMFS hinders an easy adaptation, as the entire control software has to be re-tested, when manually changing sub-parts of the control. As adaption and subsequent test…
▽ More
The increasing demand for flexibility of automated production systems also affects the automated material flow systems (aMFS) they contain and demands reconfigurable systems. However, the centralized control concept usually applied in aMFS hinders an easy adaptation, as the entire control software has to be re-tested, when manually changing sub-parts of the control. As adaption and subsequent testing are a time-consuming task, concepts for splitting the control from one centralized to multiple, decentralized control nodes are required. Therefore, this paper presents a holistic agent-based control concept for aMFS, whereby the system is divided into so-called automated material flow modules (aMFM), each being controlled by a dedicated module agent. The concept allows the reconfiguration of aMFS, consisting of heterogeneous, stationary aMFM, during runtime. Furthermore, it includes aspects such as uniform agent knowledge bases through metamodel-based development, a communication ontology considering different information types and properties, strategic route optimization in decentralized control architecture and a visualization concept to make decisions of the module agents comprehensible to operators and maintenance staff. The evaluation of the concept is performed by means of material flow simulations as well as a prototypical implementation on a lab-sized demonstrator.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Measuring the Overall Complexity of Graphical and Textual IEC 61131-3 Control Software
Authors:
Juliane Fischer,
Birgit Vogel-Heuser,
Heiko Schneider,
Nikolai Langer,
Markus Felger,
Matthias Bengel
Abstract:
Software implements a significant proportion of functionality in factory automation. Thus, efficient development and the reuse of software parts, so-called units, enhance competitiveness. Thereby, complex control software units are more difficult to understand, leading to increased development, testing and maintenance costs. However, measuring complexity is challenging due to many different, subje…
▽ More
Software implements a significant proportion of functionality in factory automation. Thus, efficient development and the reuse of software parts, so-called units, enhance competitiveness. Thereby, complex control software units are more difficult to understand, leading to increased development, testing and maintenance costs. However, measuring complexity is challenging due to many different, subjective views on the topic. This paper compares different complexity definitions from literature and considers with a qualitative questionnaire study the complexity perception of domain experts, who confirm the importance of objective measures to compare complexity. The paper proposes a set of metrics that measure various classes of software complexity to identify the most complex software units as a prerequisite for refactoring. The metrics include complexity caused by size, data structure, control flow, information flow and lexical structure. Unlike most literature approaches, the metrics are compliant with graphical and textual languages from the IEC 61131-3 standard. Further, a concept for interpreting the metric results is presented. A comprehensive evaluation with industrial software from two German plant manufacturers validates the metrics' suitability to measure complexity.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Modularity and Architecture of PLC-based Software for Automated Production Systems: An analysis in industrial companies
Authors:
Birgit Vogel-Heuser,
Juliane Fischer,
Stefan Feldmann,
Sebastian Ulewicz,
Susanne Rösch
Abstract:
Adaptive and flexible production systems require modular and reusable software especially considering their long term life cycle of up to 50 years. SWMAT4aPS, an approach to measure Software Maturity for automated Production Systems is introduced. The approach identifies weaknesses and strengths of various companie's solutions for modularity of software in the design of automated Production System…
▽ More
Adaptive and flexible production systems require modular and reusable software especially considering their long term life cycle of up to 50 years. SWMAT4aPS, an approach to measure Software Maturity for automated Production Systems is introduced. The approach identifies weaknesses and strengths of various companie's solutions for modularity of software in the design of automated Production Systems (aPS). At first, a self assessed questionnaire is used to evaluate a large number of companies concerning their software maturity. Secondly, we analyze PLC code, architectural levels, workflows and abilities to configure code automatically out of engineering information in four selected companies. In this paper, the questionnaire results from 16 German world leading companies in machine and plant manufacturing and four case studies validating the results from the detailed analyses are introduced to prove the applicability of the approach and give a survey of the state of the art in industry.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
On sub-graphs of the Johnson $\mathcal{J}(n,k)$ graph induced by particle systems on simple graphs
Authors:
Jens Walter Fischer
Abstract:
Understanding the topology of the state space has proven to be extremely efficient for dynamical systems with a continuous state space. On the other hand, for particle systems on finite simple graphs, it has not yet been subject to deep investigation due to combinatorial hurdles and existing efficient spectral theoretic approaches to the analysis of classical particle systems. In the context of co…
▽ More
Understanding the topology of the state space has proven to be extremely efficient for dynamical systems with a continuous state space. On the other hand, for particle systems on finite simple graphs, it has not yet been subject to deep investigation due to combinatorial hurdles and existing efficient spectral theoretic approaches to the analysis of classical particle systems. In the context of complex systems with heterogeneous interactions of particles, these techniques can break down due to intractability. This work provides a tool box of results on the topology of state spaces of particles systems under the sole conditions that exactly one particle moves at a time and no two particles may occupy the same vertex at the same time. The Johnson $\mathcal{J}(n,k)$ graph yields the overarching structure and we prove that any particle system with exclusion property and single particle movements may be embedded as a dynamical system on a sub-graph of $\mathcal{J}(n,k)$.
△ Less
Submitted 2 November, 2022; v1 submitted 21 October, 2022;
originally announced October 2022.
-
Modulated Kondo screening along magnetic mirror twin boundaries in monolayer MoS2 on graphene
Authors:
Camiel van Efferen,
Jeison Fischer,
Theo A. Costi,
Achim Rosch,
Thomas Michely,
Wouter Jolie
Abstract:
A many-body resonance emerges at the Fermi energy when an electron bath screens the magnetic moment of a half-filled impurity level. This Kondo effect, originally introduced to explain the abnormal resistivity behavior in bulk magnetic alloys, has been realized in many quantum systems over the past decades, such as quantum dots, quantum point contacts, nanowires, single-molecule transistors, heavy…
▽ More
A many-body resonance emerges at the Fermi energy when an electron bath screens the magnetic moment of a half-filled impurity level. This Kondo effect, originally introduced to explain the abnormal resistivity behavior in bulk magnetic alloys, has been realized in many quantum systems over the past decades, such as quantum dots, quantum point contacts, nanowires, single-molecule transistors, heavy-fermion lattices, down to adsorbed single atoms. Here we describe a unique Kondo system which allows us to experimentally resolve the spectral function consisting of impurity levels and Kondo resonance in a large Kondo temperature range, as well as their spatial modulation. Our experimental Kondo system, based on a discrete half-filled quantum confined state within a MoS2 grain boundary, in conjunction with numerical renormalization group calculations, enables us to test the predictive power of the Anderson model which is the basis of the microscopic understanding of Kondo physics.
△ Less
Submitted 8 May, 2023; v1 submitted 18 October, 2022;
originally announced October 2022.
-
300: An ACA 870 $μ$m Continuum Survey of Orion Protostars and their Evolution
Authors:
Samuel Federman,
S. Thomas Megeath,
John J. Tobin,
Patrick D. Sheehan,
Riwaj Pokhrel,
Nolan Habel,
Amelia M. Stutz,
William J. Fischer,
Lee Hartmann,
Thomas Stanke,
Mayank Narang,
Mayra Osorio,
Prabhani Atnagulov,
Rohan Rahatgaonkar
Abstract:
We present an 870 $μ$m continuum survey of 300 protostars from the Herschel Orion Protostar Survey using the Atacama Compact Array (ACA). These data measure protostellar flux densities on envelope scales $\leq$8000 au (20") and resolve the structure of envelopes with 1600 au (4") resolution, a factor of 3-5 improvement in angular resolution over existing single-dish 870 $μ$m observations. We compa…
▽ More
We present an 870 $μ$m continuum survey of 300 protostars from the Herschel Orion Protostar Survey using the Atacama Compact Array (ACA). These data measure protostellar flux densities on envelope scales $\leq$8000 au (20") and resolve the structure of envelopes with 1600 au (4") resolution, a factor of 3-5 improvement in angular resolution over existing single-dish 870 $μ$m observations. We compare the ACA observations to Atacama Large Millimeter/submillimeter Array 12 m array observations at 870 $μ$m with $\sim$0.1 (40 au) resolution. Using the 12 m data to measure the fluxes from disks and the ACA data within 2500 au to measure the combined disk plus envelope fluxes, we calculate the 12 m/ACA 870 $μ$m flux ratios. Our sample shows a clear evolution in this ratio. Class 0 protostars are mostly envelope-dominated with ratios $<$0.5. In contrast, Flat Spectrum protostars are primarily disk-dominated with ratios near 1, although with a number of face-on protostars dominated by their envelopes. Class I protostars span the range from envelope to disk-dominated. The increase in ratio is accompanied by a decrease in the envelope fluxes and estimated mass infall rates. We estimate that 80$\%$ of the mass is accreted during the envelope-dominated phase. We find that the 12 m/ACA flux ratio is an evolutionary indicator that largely avoids the inclination and foreground extinction dependence of spectral energy distribution-based indicators.
△ Less
Submitted 23 February, 2023; v1 submitted 14 October, 2022;
originally announced October 2022.
-
LapGM: A Multisequence MR Bias Correction and Normalization Model
Authors:
Luciano Vinas,
Arash A. Amini,
Jade Fischer,
Atchar Sudhyadhom
Abstract:
A spatially regularized Gaussian mixture model, LapGM, is proposed for the bias field correction and magnetic resonance normalization problem. The proposed spatial regularizer gives practitioners fine-tuned control between balancing bias field removal and preserving image contrast preservation for multi-sequence, magnetic resonance images. The fitted Gaussian parameters of LapGM serve as control v…
▽ More
A spatially regularized Gaussian mixture model, LapGM, is proposed for the bias field correction and magnetic resonance normalization problem. The proposed spatial regularizer gives practitioners fine-tuned control between balancing bias field removal and preserving image contrast preservation for multi-sequence, magnetic resonance images. The fitted Gaussian parameters of LapGM serve as control values which can be used to normalize image intensities across different patient scans. LapGM is compared to well-known debiasing algorithm N4ITK in both the single and multi-sequence setting. As a normalization procedure, LapGM is compared to known techniques such as: max normalization, Z-score normalization, and a water-masked region-of-interest normalization. Lastly a CUDA-accelerated Python package $\texttt{lapgm}$ is provided from the authors for use.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Extension of HOPS Out to 500 ParSecs (eHOPS). I. Identification and Modeling of Protostars in the Aquila Molecular Clouds
Authors:
Riwaj Pokhrel,
S. Thomas Megeath,
Robert A. Gutermuth,
Elise Furlan,
William J. Fischer,
Samuel Federman,
John J. Tobin,
Amelia M. Stutz,
Lee Hartmann,
Mayra Osorio,
Dan M. Watson,
Thomas Stanke,
P. Manoj,
Mayank Narang,
Prabhani Atnagulov,
Nolan Habel,
Wafa Zakri
Abstract:
We present a Spitzer/Herschel focused survey of the Aquila molecular clouds ($d \sim 436$~pc) as part of the eHOPS (extension of HOPS Out to 500 ParSecs) census of nearby protostars. For every source detected in the Herschel/PACS bands, the eHOPS-Aquila catalog contains 1-850~$μ$m SEDs assembled from 2MASS, Spitzer, Herschel, WISE, and JCMT/SCUBA-2 data. Using a newly developed set of criteria, we…
▽ More
We present a Spitzer/Herschel focused survey of the Aquila molecular clouds ($d \sim 436$~pc) as part of the eHOPS (extension of HOPS Out to 500 ParSecs) census of nearby protostars. For every source detected in the Herschel/PACS bands, the eHOPS-Aquila catalog contains 1-850~$μ$m SEDs assembled from 2MASS, Spitzer, Herschel, WISE, and JCMT/SCUBA-2 data. Using a newly developed set of criteria, we classify objects by their SEDs as protostars, pre-ms sequence stars with disks, and galaxies. A total of 172 protostars are found in Aquila, tightly concentrated in the molecular filaments that thread the clouds. Of these, 71 (42\%) are Class 0 protostars, 54 (31\%) are Class I protostars, 43 (25\%) are flat-spectrum protostars, and 4 (2\%) are Class II sources. Ten of the Class 0 protostars are young PACS Bright Red Sources similar to those discovered in Orion. We compare the SEDs to a grid of radiative transfer models to constrain the luminosities, envelope densities, and envelope masses of the protostars. A comparison of the eHOPS-Aquila to the HOPS protostars in Orion finds that the protostellar luminosity functions in the two star-forming regions are statistically indistinguishable, the bolometric temperatures/envelope masses of eHOPS-Aquila protostars are shifted to cooler temperatures/higher masses, and the eHOPS-Aquila protostars do not show the decline in luminosity with evolution found in Orion. We briefly discuss whether these differences are due to biases between the samples, diverging star formation histories, or the influence of environment on protostellar evolution.
△ Less
Submitted 22 February, 2023; v1 submitted 24 September, 2022;
originally announced September 2022.
-
The importance of radiative pumping on the emission of the H_2O submillimeter lines in galaxies
Authors:
Eduardo González-Alfonso,
Jacqueline Fischer,
Javier R. Goicoechea,
Chentao Yang,
Miguel Pereira-Santaella,
Kenneth P. Stewart
Abstract:
H_2O submillimeter emission is a powerful diagnostic of the molecular interstellar medium in a variety of sources, including low- and high-mass star forming regions of the Milky Way, and from local to high redshift galaxies. However, the excitation mechanism of these lines in galaxies has been debated, preventing a basic consensus on the physical information that H_2O provides. Both radiative pump…
▽ More
H_2O submillimeter emission is a powerful diagnostic of the molecular interstellar medium in a variety of sources, including low- and high-mass star forming regions of the Milky Way, and from local to high redshift galaxies. However, the excitation mechanism of these lines in galaxies has been debated, preventing a basic consensus on the physical information that H_2O provides. Both radiative pumping due to H_2O absorption of far-infrared photons emitted by dust and collisional excitation in dense shocked gas have been proposed to explain the H_2O emission. Here we propose two basic diagnostics to distinguish between the two mechanisms: 1) in shock excited regions, the ortho-H_2O 3_{21}-2_{12} 75um and the para-H_2O 2_{20}-1_{11} 101um rotational lines are expected to be in emission while, if radiative pumping dominates, both far-infrared lines are expected to be in absorption; 2) based on statistical equilibrium of H_2O level populations, the radiative pumping scenario predicts that the apparent isotropic net rate of far-infrared absorption in the 3_{21}-2_{12} (75um) and 2_{20}-1_{11} (101um) lines should be higher than or equal to the apparent isotropic net rate of submillimeter emission in the 3_{21}-3_{12} (1163 GHz) and 2_20-2_{11} (1229 GHz) lines, respectively. Applying both criteria to all 16 galaxies and several galactic high-mass star-forming regions where the H_2O 75um and submillimeter lines have been observed with Herschel/PACS and SPIRE, we show that in most (extra)galactic sources the H_2O submillimeter line excitation is dominated by far-infrared pumping, with collisional excitation of the low-excitation levels in some of them. Based on this finding, we revisit the interpretation of the correlation between the luminosity of the H_2O 988 GHz line and the source luminosity in the combined galactic and extragalactic sample.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
High emission rate from a Purcell-enhanced, triggered source of pure single photons in the telecom C-band
Authors:
Cornelius Nawrath,
Raphael Joos,
Sascha Kolatschek,
Stephanie Bauer,
Pascal Pruy,
Florian Hornung,
Julius Fischer,
Jiasheng Huang,
Ponraj Vijayan,
Robert Sittig,
Michael Jetter,
Simone Luca Portalupi,
Peter Michler
Abstract:
Several emission features mark semiconductor quantum dots as promising non-classical light sources for prospective quantum implementations. For long-distance transmission [1] and Si-based on-chip processing[2, 3], the possibility to match the telecom C-band [4] stands out, while source brightness and high single-photon purity are key features in virtually any quantum implementation [5, 6]. Here we…
▽ More
Several emission features mark semiconductor quantum dots as promising non-classical light sources for prospective quantum implementations. For long-distance transmission [1] and Si-based on-chip processing[2, 3], the possibility to match the telecom C-band [4] stands out, while source brightness and high single-photon purity are key features in virtually any quantum implementation [5, 6]. Here we present an InAs/InGaAs/GaAs quantum dot emitting in the telecom C-band coupled to a circular Bragg grating. The Purcell enhancement of the emission enables a simultaneously high brightness with a fiber-coupled single-photon count rate of 13.9MHz for an excitation repetition rate of 228MHz (first-lens collection efficiency ca. 17% for NA = 0.6), while maintaining a low multi-photon contribution of g(2)(0) = 0.0052. Moreover, the compatibility with temperatures of up to 40K attainable with compact cryo coolers, further underlines the suitability for out-of-the-lab implementations.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Industry Led Use-Case Development for Human-Swarm Operations
Authors:
Jediah R. Clark,
Mohammad Naiseh,
Joel Fischer,
Marise Galvez Trigo,
Katie Parnell,
Mario Brito,
Adrian Bodenmann,
Sarvapali D. Ramchurn,
Mohammad Divband Soorati
Abstract:
In the domain of unmanned vehicles, autonomous robotic swarms promise to deliver increased efficiency and collective autonomy. How these swarms will operate in the future, and what communication requirements and operational boundaries will arise are yet to be sufficiently defined. A workshop was conducted with 11 professional unmanned-vehicle operators and designers with the objective of identifyi…
▽ More
In the domain of unmanned vehicles, autonomous robotic swarms promise to deliver increased efficiency and collective autonomy. How these swarms will operate in the future, and what communication requirements and operational boundaries will arise are yet to be sufficiently defined. A workshop was conducted with 11 professional unmanned-vehicle operators and designers with the objective of identifying use-cases for developing and testing robotic swarms. Three scenarios were defined by experts and were then compiled to produce a single use case outlining the scenario, objectives, agents, communication requirements and stages of operation when collaborating with highly autonomous swarms. Our compiled use case is intended for researchers, designers, and manufacturers alike to test and tailor their design pipeline to accommodate for some of the key issues in human-swarm ininteraction. Examples of application include informing simulation development, forming the basis of further design workshops, and identifying trust issues that may arise between human operators and the swarm.
△ Less
Submitted 24 July, 2022; v1 submitted 19 July, 2022;
originally announced July 2022.
-
Pinching Azumaya algebras
Authors:
Johannes Fischer
Abstract:
We show, that for a morphism of schemes from X to Y, that is a finite modification in finitely many closed points, a cohomological Brauer class on Y is represented by an Azumaya algebra if its pullback to X is represented by an Azumaya algebra. Part of the proof uses an extension of a result by Ferrand, on pinching of finite locally free sheaves, to Azumaya algebras.
We show, that for a morphism of schemes from X to Y, that is a finite modification in finitely many closed points, a cohomological Brauer class on Y is represented by an Azumaya algebra if its pullback to X is represented by an Azumaya algebra. Part of the proof uses an extension of a result by Ferrand, on pinching of finite locally free sheaves, to Azumaya algebras.
△ Less
Submitted 14 April, 2023; v1 submitted 13 July, 2022;
originally announced July 2022.
-
Implementing Competency-Based Grading Improves the Performance of Women and First Generation Students in Introductory Physics
Authors:
Matthew Richard,
Jennifer Delgado,
Sarah LeGresley,
Christopher J. Fischer
Abstract:
We present a model for competency-based grading for calculus-based introductory physics that encourages students to obtain proficiency with all course content. By allowing students to continually improve their proficiency with skills and content throughout the semester, this formative grading system is designed to create a more flexible learning environment that better accommodates the varying sch…
▽ More
We present a model for competency-based grading for calculus-based introductory physics that encourages students to obtain proficiency with all course content. By allowing students to continually improve their proficiency with skills and content throughout the semester, this formative grading system is designed to create a more flexible learning environment that better accommodates the varying schedules and needs of students. While all students show improvement in their performance following the implementation of this grading system, the largest gains were found for women and first generation students, both of whom often pose a retention risk in science and engineering degree programs.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Transcendental solution to linear coefficient non-homogeneous second order recurrence relation with constant non-homogenity
Authors:
Jens Walter Fischer
Abstract:
Second order recurrence relations of real numbers arise form various applications in discrete time dynamical systems as well as in the context on Markov chains. Solutions to the recurrence relations are fully defined by the first two initial values as well as the recurrence formula. We calculate in this work explicitly as a function of $a_1$ the minimal positive solution $(a_i)_{i\in\mathbb{N}}$ t…
▽ More
Second order recurrence relations of real numbers arise form various applications in discrete time dynamical systems as well as in the context on Markov chains. Solutions to the recurrence relations are fully defined by the first two initial values as well as the recurrence formula. We calculate in this work explicitly as a function of $a_1$ the minimal positive solution $(a_i)_{i\in\mathbb{N}}$ to non-homogeneous second order recurrence relation with affine coefficients when the non-homogeneity is constant and negative, and the first initial value equals $a_0=0$. We show that rational coefficients lead to a sequence of transcendental numbers. Additionally, we prove that this sequence is the only bounded solution when varying $a_1$, converges to $0$ and obtain the convergence speed in $O(i^{-1})$. We comment in the last section further on the choice of rational parameters in the recurrence relation and we make a link to the impossibility of obtaining computer based visualizations of the minimal positive solution $(a_i)_{i\in\mathbb{N}}$.
△ Less
Submitted 17 August, 2022; v1 submitted 26 April, 2022;
originally announced April 2022.
-
A census of young stellar objects in two line-of-sight star forming regions toward IRAS 22147+5948 in the outer Galaxy
Authors:
Agata Karska,
Maciej Koprowski,
Aleksandra Solarz,
Ryszard Szczerba,
Marta Sewiło,
Natasza Siódmiak,
Davide Elia,
Marcin Gawroński,
Konrad Grzesiak,
Bosco H. K. Yung,
William J. Fischer,
Lars E. Kristensen
Abstract:
(abridged) Star formation in the outer Galaxy, i.e., outside of the Solar circle, has been lightly studied in part due to low CO brightness of molecular clouds linked with the negative metallicity gradient. Recent infrared surveys provide an overview of dust emission in large sections of the Galaxy, but suffer from cloud confusion and poor spatial resolution at far-infrared wavelengths. We aim to…
▽ More
(abridged) Star formation in the outer Galaxy, i.e., outside of the Solar circle, has been lightly studied in part due to low CO brightness of molecular clouds linked with the negative metallicity gradient. Recent infrared surveys provide an overview of dust emission in large sections of the Galaxy, but suffer from cloud confusion and poor spatial resolution at far-infrared wavelengths. We aim to develop a methodology to identify and classify young stellar objects (YSOs) in star-forming regions in the outer Galaxy, and use it to solve a long-standing confusion with the distance and evolutionary status of IRAS 22147+5948. We use Support Vector Machine learning algorithm to complement standard color-color and color-magnitude diagrams in search for YSOs in the IRAS 22147 region using publicly available data from the `Spitzer Mapping of the Outer Galaxy' survey. The agglomerative hierarchical clustering algorithm is used to identify clusters, along with the Robitaille et al. (2017) code to calculate physical properties of individual YSOs. We identify 13 Class I and 13 Class II YSO candidates using the color-color diagrams, and additional 2 and 21 sources, respectively, using the machine learning techniques. Spectral energy distributions of 23 sources are modelled with a star and a passive disk, corresponding to Class II objects. Models of 3 sources include envelopes typical for Class I objects. The objects are grouped in 2 clusters located at the distance of ~2.2 kpc, and 5 clusters at ~5.6 kpc. The spatial extent of CO, radio continuum, and dust emission confirms the origin of YSOs in two distinct star-forming regions along a similar line-of-sight. The outer Galaxy might serve as a unique laboratory of star formation across environments on condition that complementary methods and ancillary data are used to properly account for cloud confusion and distance uncertainties.
△ Less
Submitted 11 May, 2022; v1 submitted 25 April, 2022;
originally announced April 2022.
-
Gate-controlled skyrmion and domain wall chirality
Authors:
Charles-Elie Fillion,
Johanna Fischer,
Raj Kumar,
Aymen Fassatoui,
Stefania Pizzini,
Laurent Ranno,
Djoudi Ourdani,
Mohamed Belmeguenai,
Yves Roussigné,
Salim-Mourad Chérif,
Stéphane Auffret,
Isabelle Joumard,
Olivier Boulle,
Gilles Gaudin,
Liliana Buda-Prejbeanu,
Claire Baraduc,
Hélène Béa
Abstract:
Magnetic skyrmions are localized chiral spin textures, which offer great promise to store and process information at the nanoscale. In the presence of asymmetric exchange interactions, their chirality, which governs their dynamics, is generally considered as an intrinsic parameter set during the sample deposition. In this work, we experimentally demonstrate that a gate voltage can control this key…
▽ More
Magnetic skyrmions are localized chiral spin textures, which offer great promise to store and process information at the nanoscale. In the presence of asymmetric exchange interactions, their chirality, which governs their dynamics, is generally considered as an intrinsic parameter set during the sample deposition. In this work, we experimentally demonstrate that a gate voltage can control this key parameter. We probe the chirality of skyrmions and chiral domain walls by observing the direction of their current-induced motion and show that a gate voltage can reverse it. This local and dynamical reversal of the chirality is due to a sign inversion of the interfacial Dzyaloshinskii-Moriya interaction that we attribute to ionic migration of oxygen under gate voltage. Micromagnetic simulations show that the chirality reversal is a continuous transformation, in which the skyrmion is conserved. This control of chirality with 2 - 3 V gate voltage can be used for skyrmion-based logic devices, yielding new functionalities.
△ Less
Submitted 7 September, 2022; v1 submitted 8 April, 2022;
originally announced April 2022.
-
SHAIL: Safety-Aware Hierarchical Adversarial Imitation Learning for Autonomous Driving in Urban Environments
Authors:
Arec Jamgochian,
Etienne Buehrle,
Johannes Fischer,
Mykel J. Kochenderfer
Abstract:
Designing a safe and human-like decision-making system for an autonomous vehicle is a challenging task. Generative imitation learning is one possible approach for automating policy-building by leveraging both real-world and simulated decisions. Previous work that applies generative imitation learning to autonomous driving policies focuses on learning a low-level controller for simple settings. How…
▽ More
Designing a safe and human-like decision-making system for an autonomous vehicle is a challenging task. Generative imitation learning is one possible approach for automating policy-building by leveraging both real-world and simulated decisions. Previous work that applies generative imitation learning to autonomous driving policies focuses on learning a low-level controller for simple settings. However, to scale to complex settings, many autonomous driving systems combine fixed, safe, optimization-based low-level controllers with high-level decision-making logic that selects the appropriate task and associated controller. In this paper, we attempt to bridge this gap in complexity by employing Safety-Aware Hierarchical Adversarial Imitation Learning (SHAIL), a method for learning a high-level policy that selects from a set of low-level controller instances in a way that imitates low-level driving data on-policy. We introduce an urban roundabout simulator that controls non-ego vehicles using real data from the Interaction dataset. We then demonstrate empirically that even with simple controller options, our approach can produce better behavior than previous approaches in driver imitation that have difficulty scaling to complex environments. Our implementation is available at https://github.com/sisl/InteractionImitation.
△ Less
Submitted 10 June, 2023; v1 submitted 4 April, 2022;
originally announced April 2022.
-
Quantitative convergence of the vectorial Allen-Cahn equation towards multiphase mean curvature flow
Authors:
Julian Fischer,
Alice Marveggio
Abstract:
Phase-field models such as the Allen-Cahn equation may give rise to the formation and evolution of geometric shapes, a phenomenon that may be analyzed rigorously in suitable scaling regimes. In its sharp-interface limit, the vectorial Allen-Cahn equation with a potential with $N\geq 3$ distinct minima has been conjectured to describe the evolution of branched interfaces by multiphase mean curvatur…
▽ More
Phase-field models such as the Allen-Cahn equation may give rise to the formation and evolution of geometric shapes, a phenomenon that may be analyzed rigorously in suitable scaling regimes. In its sharp-interface limit, the vectorial Allen-Cahn equation with a potential with $N\geq 3$ distinct minima has been conjectured to describe the evolution of branched interfaces by multiphase mean curvature flow.
In the present work, we give a rigorous proof for this statement in two and three ambient dimensions and for a suitable class of potentials: As long as a strong solution to multiphase mean curvature flow exists, solutions to the vectorial Allen-Cahn equation with well-prepared initial data converge towards multiphase mean curvature flow in the limit of vanishing interface width parameter $\varepsilon\searrow 0$. We even establish the rate of convergence $O(\varepsilon^{1/2})$.
Our approach is based on the gradient flow structure of the Allen-Cahn equation and its limiting motion: Building on the recent concept of "gradient flow calibrations" for multiphase mean curvature flow, we introduce a notion of relative entropy for the vectorial Allen-Cahn equation with multi-well potential. This enables us to overcome the limitations of other approaches, e.g. avoiding the need for a stability analysis of the Allen-Cahn operator or additional convergence hypotheses for the energy at positive times.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
Optimal control and selectivity of qubits in contact with a structured environment
Authors:
Quentin Ansel,
Jonas Fischer,
Dominique Sugny,
Bruno Bellomo
Abstract:
We present a theoretical study of the optimal control of a qubit interacting with a structured environment. We consider a model system in which the bath is a bosonic reservoir at zero temperature and the qubit frequency is the only control parameter. Using optimal control techniques, we show the extent to which qubit population and relaxation effects can be manipulated. The reachable qubit states…
▽ More
We present a theoretical study of the optimal control of a qubit interacting with a structured environment. We consider a model system in which the bath is a bosonic reservoir at zero temperature and the qubit frequency is the only control parameter. Using optimal control techniques, we show the extent to which qubit population and relaxation effects can be manipulated. The reachable qubit states by a shaped control with a fixed maximum intensity are found numerically. We analyze the role of standard control mechanisms and the structure of the set of reachable states with respect to the coupling strength between the system and the environment. This investigation is used as a starting point to explore the selectivity problem of two uncoupled qubits interacting with their own baths and characterized by a specific coupling strength. We numerically derive the optimal control solution for a wide range of parameters and we show that the control law is close to a sinusoidal function with a specific frequency in some peculiar cases.
△ Less
Submitted 3 October, 2022; v1 submitted 29 March, 2022;
originally announced March 2022.
-
A monotonicity formula for minimizers of the Mumford-Shah functional in 2d and a sharp lower bound on the energy density
Authors:
Julian Fischer
Abstract:
We establish a new monotonicity formula for minimizers of the Mumford-Shah functional in planar domains. Our formula follows the spirit of Bucur-Luckhaus, but works with the David-Léger entropy instead of the energy. Interestingly, this allows for a sharp truncation threshold. In particular, our monotonicity formula is able to discriminate between points at a $C^1$ interface and any other type of…
▽ More
We establish a new monotonicity formula for minimizers of the Mumford-Shah functional in planar domains. Our formula follows the spirit of Bucur-Luckhaus, but works with the David-Léger entropy instead of the energy. Interestingly, this allows for a sharp truncation threshold. In particular, our monotonicity formula is able to discriminate between points at a $C^1$ interface and any other type of singularity in terms of a finite gap in the entropy. As a corollary, we prove an optimal lower bound on the energy density around any nonsmooth point for minimizers of the Mumford-Shah functional.
△ Less
Submitted 24 March, 2022;
originally announced March 2022.
-
Accretion Variability as a Guide to Stellar Mass Assembly
Authors:
William J. Fischer,
Lynne A. Hillenbrand,
Gregory J. Herczeg,
Doug Johnstone,
Ágnes Kóspál,
Michael M. Dunham
Abstract:
Variable accretion in young stellar objects reveals itself photometrically and spectroscopically over a continuum of timescales and amplitudes. Most dramatic are the large outbursts (e.g., FU Ori, V1647 Ori, and EX Lup type events), but more frequent are the less coherent, smaller burst-like variations in accretion rate. Improving our understanding of time-variable accretion directly addresses the…
▽ More
Variable accretion in young stellar objects reveals itself photometrically and spectroscopically over a continuum of timescales and amplitudes. Most dramatic are the large outbursts (e.g., FU Ori, V1647 Ori, and EX Lup type events), but more frequent are the less coherent, smaller burst-like variations in accretion rate. Improving our understanding of time-variable accretion directly addresses the fundamental question of how stars gain their masses. We review variability phenomena, as characterized from observations across the wavelength spectrum, and how those observations probe underlying physical conditions. The diversity of observed lightcurves and spectra at optical and infrared wavelengths defies a simple classification of outbursts and bursts into well-defined categories. Mid-infrared and submillimeter wavelengths are sensitive to lower-temperature phenomena and more embedded, younger sources, and it is currently unclear if observed flux variations probe similar or distinct physics relative to the shorter wavelengths. We highlight unresolved issues and emphasize the value of spectroscopy, multiwavelength studies, and ultimately patience in using variable accretion to understand stellar mass assembly.
△ Less
Submitted 17 November, 2023; v1 submitted 21 March, 2022;
originally announced March 2022.
-
Demonstration of latency-aware 5G network slicing on optical metro networks
Authors:
B. Shariati,
L. Velasco,
J. -J. Pedreño-Manresa,
A. Dochhan,
R. Casellas,
A. Muqaddas,
O. González de Dios,
L. Luque Canto,
B. Lent,
J. E. López de Vergara,
S. López-Buedo,
F. Moreno,
P. Pavón,
M. Ruiz,
S. K. Patri,
A. Giorgetti,
F. Cugini,
A. Sgambelluri,
R. Nejabati,
D. Simeonidou,
R. -P. Braun,
A. Autenrieth,
J. -P. Elbers,
J. K. Fischer,
R. Freund
Abstract:
The H2020 METRO-HAUL European project has architected a latency-aware, cost-effective, agile, and programmable optical metro network. This includes the design of semidisaggregated metro nodes with compute and storage capabilities, which interface effectively with both 5G access and multi-Tbit/s elastic optical networks in the core. In this paper, we report the automated deployment of 5G services,…
▽ More
The H2020 METRO-HAUL European project has architected a latency-aware, cost-effective, agile, and programmable optical metro network. This includes the design of semidisaggregated metro nodes with compute and storage capabilities, which interface effectively with both 5G access and multi-Tbit/s elastic optical networks in the core. In this paper, we report the automated deployment of 5G services, in particular, a public safety video surveillance use case employing low-latency object detection and tracking using on-camera and on-the-edge analytics. The demonstration features flexible deployment of network slice instances, implemented in terms of European Telecommunications Standards Institute (ETSI) network function virtualization network services. We summarize the key findings in a detailed analysis of end-to-end quality of service, service setup time, and soft-failure detection time. The results show that the round-trip time over an 80 km link is under 800s and the service deployment time is under 180s.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
A Survey on Machine Learning Approaches for Modelling Intuitive Physics
Authors:
Jiafei Duan,
Arijit Dasgupta,
Jason Fischer,
Cheston Tan
Abstract:
Research in cognitive science has provided extensive evidence of human cognitive ability in performing physical reasoning of objects from noisy perceptual inputs. Such a cognitive ability is commonly known as intuitive physics. With advancements in deep learning, there is an increasing interest in building intelligent systems that are capable of performing physical reasoning from a given scene for…
▽ More
Research in cognitive science has provided extensive evidence of human cognitive ability in performing physical reasoning of objects from noisy perceptual inputs. Such a cognitive ability is commonly known as intuitive physics. With advancements in deep learning, there is an increasing interest in building intelligent systems that are capable of performing physical reasoning from a given scene for the purpose of building better AI systems. As a result, many contemporary approaches in modelling intuitive physics for machine cognition have been inspired by literature from cognitive science. Despite the wide range of work in physical reasoning for machine cognition, there is a scarcity of reviews that organize and group these deep learning approaches. Especially at the intersection of intuitive physics and artificial intelligence, there is a need to make sense of the diverse range of ideas and approaches. Therefore, this paper presents a comprehensive survey of recent advances and techniques in intuitive physics-inspired deep learning approaches for physical reasoning. The survey will first categorize existing deep learning approaches into three facets of physical reasoning before organizing them into three general technical approaches and propose six categorical tasks of the field. Finally, we highlight the challenges of the current field and present some future research directions.
△ Less
Submitted 27 April, 2022; v1 submitted 13 February, 2022;
originally announced February 2022.
-
The ODYSSEUS Survey. Motivation and First Results: Accretion, Ejection, and Disk Irradiation of CVSO 109
Authors:
C. C. Espaillat,
G. J. Herczeg,
T. Thanathibodee,
C. Pittman,
N. Calvet,
N. Arulanantham,
K. France,
Javier Serna,
J. Hernandez,
A. Kospal,
F. M. Walter,
A. Frasca,
W. J. Fischer,
C. M. Johns-Krull,
P. C. Schneider,
C. Robinson,
Suzan Edwards,
P. Abraham,
Min Fang,
J. Erkal,
C. F. Manara,
J. M. Alcala,
E. Alecian,
R. D. Alexander,
J. Alonso-Santiago
, et al. (37 additional authors not shown)
Abstract:
The Hubble UV Legacy Library of Young Stars as Essential Standards (ULLYSES) Director's Discretionary Program of low-mass pre-main-sequence stars, coupled with forthcoming data from ALMA and JWST, will provide the foundation to revolutionize our understanding of the relationship between young stars and their protoplanetary disks. A comprehensive evaluation of the physics of disk evolution and plan…
▽ More
The Hubble UV Legacy Library of Young Stars as Essential Standards (ULLYSES) Director's Discretionary Program of low-mass pre-main-sequence stars, coupled with forthcoming data from ALMA and JWST, will provide the foundation to revolutionize our understanding of the relationship between young stars and their protoplanetary disks. A comprehensive evaluation of the physics of disk evolution and planet formation requires understanding the intricate relationships between mass accretion, mass outflow, and disk structure. Here we describe the Outflows and Disks around Young Stars: Synergies for the Exploration of ULLYSES Spectra (ODYSSEUS) Survey and present initial results of the classical T Tauri Star CVSO 109 in Orion OB1b as a demonstration of the science that will result from the survey. ODYSSEUS will analyze the ULLYSES spectral database, ensuring a uniform and systematic approach in order to (1) measure how the accretion flow depends on the accretion rate and magnetic structures, (2) determine where winds and jets are launched and how mass-loss rates compare with accretion, and (3) establish the influence of FUV radiation on the chemistry of the warm inner regions of planet-forming disks. ODYSSEUS will also acquire and provide contemporaneous observations at X-ray, optical, NIR, and millimeter wavelengths to enhance the impact of the ULLYSES data. Our goal is to provide a consistent framework to accurately measure the level and evolution of mass accretion in protoplanetary disks, the properties and magnitudes of inner-disk mass loss, and the influence of UV radiation fields that determine ionization levels and drive disk chemistry.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
The Rate, Amplitude and Duration of Outbursts from Class 0 Protostars in Orion
Authors:
W. Zakri,
S. T. Megeath,
W. J. Fischer,
Robert Gutermuth,
Elise Furlan,
Lee Hartmann,
Nicole Karnath,
Mayra Osorio,
Emily Safron,
Thomas Stanke,
Amelia M. Stutz,
John J. Tobin,
Thomas S. Allen,
Sam Federman,
Nolan Habel,
P. Manoj,
Mayank Narang,
Riwaj Pokhrel,
Luisa Rebull,
Patrick D. Sheehan,
Dan M. Watson
Abstract:
At least half of a protostar's mass is accreted in the Class 0 phase, when the central protostar is deeply embedded in a dense, infalling envelope. We present the first systematic search for outbursts from Class 0 protostars in the Orion clouds. Using photometry from Spitzer/IRAC spanning 2004 to 2017, we detect three outbursts from Class 0 protostars with $\ge 2$ mag changes at 3.6 or 4.5 $μ$m. T…
▽ More
At least half of a protostar's mass is accreted in the Class 0 phase, when the central protostar is deeply embedded in a dense, infalling envelope. We present the first systematic search for outbursts from Class 0 protostars in the Orion clouds. Using photometry from Spitzer/IRAC spanning 2004 to 2017, we detect three outbursts from Class 0 protostars with $\ge 2$ mag changes at 3.6 or 4.5 $μ$m. This is comparable to the magnitude change of a known protostellar FU Ori outburst. Two are newly detected bursts from the protostars HOPS 12 and 124. The number of detections implies that Class 0 protostars burst every 438 yr, with a 95% confidence interval of 161 to 1884 yr. Combining Spitzer and WISE/NEOWISE data spanning 2004-2019, we show that the bursts persist for more than nine years with significant variability during each burst. Finally, we use $19-100$ $μ$m photometry from SOFIA, Spitzer and Herschel to measure the amplitudes of the bursts. Based on the burst interval, a duration of 15 yr, and the range of observed amplitudes, 3-100% of the mass accretion during the Class 0 phase occurs during bursts. In total, we show that bursts from Class 0 protostars are as frequent, or even more frequent, than those from more evolved protostars. This is consistent with bursts being driven by instabilities in disks triggered by rapid mass infall. Furthermore, we find that bursts may be a significant, if not dominant, mode of mass accretion during the Class 0 phase.
△ Less
Submitted 12 January, 2022;
originally announced January 2022.
-
Metal-insulator transition in monolayer MoS$_2$ via contactless chemical doping
Authors:
Camiel van Efferen,
Clifford Murray,
Jeison Fischer,
Carsten Busse,
Hannu-Pekka Komsa,
Thomas Michely,
Wouter Jolie
Abstract:
Much effort has been made to modify the properties of transition metal dichalcogenide layers via their environment as a route to new functionalization. However, it remains a challenge to induce large electronic changes without chemically altering the layer or compromising its two-dimensionality. Here, a non-invasive technique is used to shift the chemical potential of monolayer MoS$_2$ through p-…
▽ More
Much effort has been made to modify the properties of transition metal dichalcogenide layers via their environment as a route to new functionalization. However, it remains a challenge to induce large electronic changes without chemically altering the layer or compromising its two-dimensionality. Here, a non-invasive technique is used to shift the chemical potential of monolayer MoS$_2$ through p- and n-type doping of graphene (Gr), which remains a well-decoupled 2D substrate. With the intercalation of oxygen (O) under Gr, a nearly rigid Fermi level shift of 0.45 eV in MoS$_2$ is demonstrated, whereas the intercalation of europium (Eu) induces a metal-insulator transition in MoS$_2$, accompanied by a giant band gap reduction of 0.67 eV. Additionally, the effect of the substrate charge on 1D states within MoS$_2$ mirror-twin boundaries (MTBs) is explored. It is found that the 1D nature of the MTB states is not compromised, even when MoS$_2$ is made metallic. Furthermore, with the periodicity of the 1D states dependent on substrate-induced charging and depletion, the boundaries serve as chemical potential sensors functional up to room temperature.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Plant 'n' Seek: Can You Find the Winning Ticket?
Authors:
Jonas Fischer,
Rebekka Burkholz
Abstract:
The lottery ticket hypothesis has sparked the rapid development of pruning algorithms that aim to reduce the computational costs associated with deep learning during training and model deployment. Currently, such algorithms are primarily evaluated on imaging data, for which we lack ground truth information and thus the understanding of how sparse lottery tickets could be. To fill this gap, we deve…
▽ More
The lottery ticket hypothesis has sparked the rapid development of pruning algorithms that aim to reduce the computational costs associated with deep learning during training and model deployment. Currently, such algorithms are primarily evaluated on imaging data, for which we lack ground truth information and thus the understanding of how sparse lottery tickets could be. To fill this gap, we develop a framework that allows us to plant and hide winning tickets with desirable properties in randomly initialized neural networks. To analyze the ability of state-of-the-art pruning to identify tickets of extreme sparsity, we design and hide such tickets solving four challenging tasks. In extensive experiments, we observe similar trends as in imaging studies, indicating that our framework can provide transferable insights into realistic problems. Additionally, we can now see beyond such relative trends and highlight limitations of current pruning methods. Based on our results, we conclude that the current limitations in ticket sparsity are likely of algorithmic rather than fundamental nature. We anticipate that comparisons to planted tickets will facilitate future developments of efficient pruning algorithms.
△ Less
Submitted 7 June, 2022; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Estimating Mutual Information via Geodesic $k$NN
Authors:
Alexander Marx,
Jonas Fischer
Abstract:
Estimating mutual information (MI) between two continuous random variables $X$ and $Y$ allows to capture non-linear dependencies between them, non-parametrically. As such, MI estimation lies at the core of many data science applications. Yet, robustly estimating MI for high-dimensional $X$ and $Y$ is still an open research question.
In this paper, we formulate this problem through the lens of ma…
▽ More
Estimating mutual information (MI) between two continuous random variables $X$ and $Y$ allows to capture non-linear dependencies between them, non-parametrically. As such, MI estimation lies at the core of many data science applications. Yet, robustly estimating MI for high-dimensional $X$ and $Y$ is still an open research question.
In this paper, we formulate this problem through the lens of manifold learning. That is, we leverage the common assumption that the information of $X$ and $Y$ is captured by a low-dimensional manifold embedded in the observed high-dimensional space and transfer it to MI estimation. As an extension to state-of-the-art $k$NN estimators, we propose to determine the $k$-nearest neighbors via geodesic distances on this manifold rather than from the ambient space, which allows us to estimate MI even in the high-dimensional setting. An empirical evaluation of our method, G-KSG, against the state-of-the-art shows that it yields good estimations of MI in classical benchmark and manifold tasks, even for high dimensional datasets, which none of the existing methods can provide.
△ Less
Submitted 18 January, 2022; v1 submitted 26 October, 2021;
originally announced October 2021.
-
Lottery Tickets with Nonzero Biases
Authors:
Jonas Fischer,
Advait Gadhikar,
Rebekka Burkholz
Abstract:
The strong lottery ticket hypothesis holds the promise that pruning randomly initialized deep neural networks could offer a computationally efficient alternative to deep learning with stochastic gradient descent. Common parameter initialization schemes and existence proofs, however, are focused on networks with zero biases, thus foregoing the potential universal approximation property of pruning.…
▽ More
The strong lottery ticket hypothesis holds the promise that pruning randomly initialized deep neural networks could offer a computationally efficient alternative to deep learning with stochastic gradient descent. Common parameter initialization schemes and existence proofs, however, are focused on networks with zero biases, thus foregoing the potential universal approximation property of pruning. To fill this gap, we extend multiple initialization schemes and existence proofs to nonzero biases, including explicit 'looks-linear' approaches for ReLU activation functions. These do not only enable truly orthogonal parameter initialization but also reduce potential pruning errors. In experiments on standard benchmark data, we further highlight the practical benefits of nonzero bias initialization schemes, and present theoretically inspired extensions for state-of-the-art strong lottery ticket pruning.
△ Less
Submitted 7 June, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Label-Descriptive Patterns and Their Application to Characterizing Classification Errors
Authors:
Michael Hedderich,
Jonas Fischer,
Dietrich Klakow,
Jilles Vreeken
Abstract:
State-of-the-art deep learning methods achieve human-like performance on many tasks, but make errors nevertheless. Characterizing these errors in easily interpretable terms gives insight into whether a classifier is prone to making systematic errors, but also gives a way to act and improve the classifier. We propose to discover those feature-value combinations (i.e., patterns) that strongly correl…
▽ More
State-of-the-art deep learning methods achieve human-like performance on many tasks, but make errors nevertheless. Characterizing these errors in easily interpretable terms gives insight into whether a classifier is prone to making systematic errors, but also gives a way to act and improve the classifier. We propose to discover those feature-value combinations (i.e., patterns) that strongly correlate with correct resp. erroneous predictions to obtain a global and interpretable description for arbitrary classifiers. We show this is an instance of the more general label description problem, which we formulate in terms of the Minimum Description Length principle. To discover a good pattern set, we develop the efficient Premise algorithm. Through an extensive set of experiments we show it performs very well in practice on both synthetic and real-world data. Unlike existing solutions, it ably recovers ground truth patterns, even on highly imbalanced data over many features. Through two case studies on Visual Question Answering and Named Entity Recognition, we confirm that Premise gives clear and actionable insight into the systematic errors made by modern NLP classifiers.
△ Less
Submitted 17 June, 2022; v1 submitted 18 October, 2021;
originally announced October 2021.
-
Federated Learning from Small Datasets
Authors:
Michael Kamp,
Jonas Fischer,
Jilles Vreeken
Abstract:
Federated learning allows multiple parties to collaboratively train a joint model without sharing local data. This enables applications of machine learning in settings of inherently distributed, undisclosable data such as in the medical domain. In practice, joint training is usually achieved by aggregating local models, for which local training objectives have to be in expectation similar to the j…
▽ More
Federated learning allows multiple parties to collaboratively train a joint model without sharing local data. This enables applications of machine learning in settings of inherently distributed, undisclosable data such as in the medical domain. In practice, joint training is usually achieved by aggregating local models, for which local training objectives have to be in expectation similar to the joint (global) objective. Often, however, local datasets are so small that local objectives differ greatly from the global objective, resulting in federated learning to fail. We propose a novel approach that intertwines model aggregations with permutations of local models. The permutations expose each local model to a daisy chain of local datasets resulting in more efficient training in data-sparse domains. This enables training on extremely small local datasets, such as patient data across hospitals, while retaining the training efficiency and privacy benefits of federated learning.
△ Less
Submitted 12 October, 2023; v1 submitted 7 October, 2021;
originally announced October 2021.
-
Global renormalised solutions and equilibration of reaction-diffusion systems with non-linear diffusion
Authors:
Klemens Fellner,
Julian Fischer,
Michael Kniely,
Bao Quoc Tang
Abstract:
The global existence of renormalised solutions and convergence to equilibrium for reaction-diffusion systems with non-linear diffusion are investigated. The system is assumed to have quasi-positive non-linearities and to satisfy an entropy inequality. The difficulties in establishing global renormalised solutions caused by possibly degenerate diffusion are overcome by introducing a new class of we…
▽ More
The global existence of renormalised solutions and convergence to equilibrium for reaction-diffusion systems with non-linear diffusion are investigated. The system is assumed to have quasi-positive non-linearities and to satisfy an entropy inequality. The difficulties in establishing global renormalised solutions caused by possibly degenerate diffusion are overcome by introducing a new class of weighted truncation functions. By means of the obtained global renormalised solutions, we study the large-time behaviour of complex balanced systems arising from chemical reaction network theory with non-linear diffusion. When the reaction network does not admit boundary equilibria, the complex balanced equilibrium is shown, by using the entropy method, to exponentially attract all renormalised solutions in the same compatibility class. This convergence extends even to a range of non-linear diffusion, where global existence is an open problem, yet we are able to show that solutions to approximate systems converge exponentially to equilibrium uniformly in the regularisation parameter.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
The Dean-Kawasaki equation and the structure of density fluctuations in systems of diffusing particles
Authors:
Federico Cornalba,
Julian Fischer
Abstract:
The Dean-Kawasaki equation - a strongly singular SPDE - is a basic equation of fluctuating hydrodynamics; it has been proposed in the physics literature to describe the fluctuations of the density of $N$ independent diffusing particles in the regime of large particle numbers $N\gg 1$. The singular nature of the Dean-Kawasaki equation presents a substantial challenge for both its analysis and its r…
▽ More
The Dean-Kawasaki equation - a strongly singular SPDE - is a basic equation of fluctuating hydrodynamics; it has been proposed in the physics literature to describe the fluctuations of the density of $N$ independent diffusing particles in the regime of large particle numbers $N\gg 1$. The singular nature of the Dean-Kawasaki equation presents a substantial challenge for both its analysis and its rigorous mathematical justification. Besides being non-renormalisable by the theory of regularity structures by Hairer et al., it has recently been shown to not even admit nontrivial martingale solutions.
In the present work, we give a rigorous and fully quantitative justification of the Dean-Kawasaki equation by considering the natural regularisation provided by standard numerical discretisations: We show that structure-preserving discretisations of the Dean-Kawasaki equation may approximate the density fluctuations of $N$ non-interacting diffusing particles to arbitrary order in $N^{-1}$ (in suitable weak metrics). In other words, the Dean-Kawasaki equation may be interpreted as a "recipe" for accurate and efficient numerical simulations of the density fluctuations of independent diffusing particles.
△ Less
Submitted 5 July, 2023; v1 submitted 14 September, 2021;
originally announced September 2021.
-
Single-crystal graphene on Ir(110)
Authors:
Stefan Kraus,
Felix Huttmann,
Jeison Fischer,
Timo Knispel,
Ken Bischof,
Alexander Herman,
Marco Bianchi,
Raluca-Maria Stan,
Ann Julie Holt,
Vasile Caciuc,
Shigeru Tsukamoto,
Heiko Wende,
Philip Hofmann,
Nicolae Atodiresei,
Thomas Michely
Abstract:
A single-crystal sheet of graphene is synthesized on the low-symmetry substrate Ir(110) by thermal decomposition of C$_2$H$_4$ at 1500 K. Using scanning tunneling microscopy, low-energy electron diffraction, angle-resolved photoemission spectroscopy, and ab initio density functional theory the structure and electronic properties of the adsorbed graphene sheet and its moiré with the substrate are u…
▽ More
A single-crystal sheet of graphene is synthesized on the low-symmetry substrate Ir(110) by thermal decomposition of C$_2$H$_4$ at 1500 K. Using scanning tunneling microscopy, low-energy electron diffraction, angle-resolved photoemission spectroscopy, and ab initio density functional theory the structure and electronic properties of the adsorbed graphene sheet and its moiré with the substrate are uncovered. The adsorbed graphene layer forms a wave pattern of nm wave length with a corresponding modulation of its electronic properties. This wave pattern is demonstrated to enable the templated adsorption of aromatic molecules and the uniaxial growth of organometallic wires. Not limited to this, graphene on Ir(110) is also a versatile substrate for 2D-layer growth and makes it possible to grow epitaxial layers on ureconstructed Ir(110).
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Minimizing Safety Interference for Safe and Comfortable Automated Driving with Distributional Reinforcement Learning
Authors:
Danial Kamran,
Tizian Engelgeh,
Marvin Busch,
Johannes Fischer,
Christoph Stiller
Abstract:
Despite recent advances in reinforcement learning (RL), its application in safety critical domains like autonomous vehicles is still challenging. Although punishing RL agents for risky situations can help to learn safe policies, it may also lead to highly conservative behavior. In this paper, we propose a distributional RL framework in order to learn adaptive policies that can tune their level of…
▽ More
Despite recent advances in reinforcement learning (RL), its application in safety critical domains like autonomous vehicles is still challenging. Although punishing RL agents for risky situations can help to learn safe policies, it may also lead to highly conservative behavior. In this paper, we propose a distributional RL framework in order to learn adaptive policies that can tune their level of conservativity at run-time based on the desired comfort and utility. Using a proactive safety verification approach, the proposed framework can guarantee that actions generated from RL are fail-safe according to the worst-case assumptions. Concurrently, the policy is encouraged to minimize safety interference and generate more comfortable behavior. We trained and evaluated the proposed approach and baseline policies using a high level simulator with a variety of randomized scenarios including several corner cases which rarely happen in reality but are very crucial. In light of our experiments, the behavior of policies learned using distributional RL can be adaptive at run-time and robust to the environment uncertainty. Quantitatively, the learned distributional RL agent drives in average 8 seconds faster than the normal DQN policy and requires 83\% less safety interference compared to the rule-based policy with slightly increasing the average crossing time. We also study sensitivity of the learned policy in environments with higher perception noise and show that our algorithm learns policies that can still drive reliable when the perception noise is two times higher than the training configuration for automated merging and crossing at occluded intersections.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Bright Purcell enhanced single-photon source in the telecom O-band based on a quantum dot in a circular Bragg grating
Authors:
Sascha Kolatschek,
Cornelius Nawrath,
Stephanie Bauer,
Jiasheng Huang,
Julius Fischer,
Robert Sittig,
Michael Jetter,
Simone L. Portalupi,
Peter Michler
Abstract:
The combination of semiconductor quantum dots (QDs) with photonic cavities is a promising way to realize non-classical light sources with state-of-the-art performances in terms of brightness, indistinguishability and repetition rate. In the present work we demonstrate the coupling of an InGaAs/GaAs QDs emitting in the telecom O-band to a circular Bragg grating cavity. We demonstrate a broadband ge…
▽ More
The combination of semiconductor quantum dots (QDs) with photonic cavities is a promising way to realize non-classical light sources with state-of-the-art performances in terms of brightness, indistinguishability and repetition rate. In the present work we demonstrate the coupling of an InGaAs/GaAs QDs emitting in the telecom O-band to a circular Bragg grating cavity. We demonstrate a broadband geometric extraction efficiency enhancement by investigating two emission lines under above-band excitation, inside and detuned from the cavity mode, respectively. In the first case, a Purcell enhancement of 4 is attained. For the latter case, an end-to-end brightness of 1.4% with a brightness at the first lens of 23% is achieved. Using p-shell pumping, a combination of high count rate with pure single-photon emission (g(2)(0) = 0.01 in saturation) is achieved. Finally a good single-photon purity (g(2)(0) = 0.13) together with a high detector count rate of 191kcps is demonstrated for a temperature of up to 77K.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.