-
Cold Seeded Epitaxy and Flexomagnetism in Smooth GdAuGe Membranes Exfoliated from graphene/Ge(111)
Authors:
Z LaDuca,
T Samanta,
N Hagopian,
T Jung,
K Su,
K Genser,
K M Rabe,
P M Voyles,
M S Arnold,
J K Kawasaki
Abstract:
Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do not wet the graphene surface. We develop a cold seed approach for synthesizing smooth intermetallic films on graphene that can be exfoliated to form few nanomet…
▽ More
Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do not wet the graphene surface. We develop a cold seed approach for synthesizing smooth intermetallic films on graphene that can be exfoliated to form few nanometer thick single crystalline membranes. Our seeded GdAuGe films have narrow x-ray rocking curve widths of 9-24 arc seconds, which is two orders of magnitude lower than their counterparts grown by typical high temperature methods, and have atomically sharp interfaces observed by transmission electron microscopy. Upon exfoliation and rippling, strain gradients in GdAuGe membranes induce an antiferromagnetic to ferri/ferromagnetic transition. Our smooth, ultrathin membranes provide a clean platform for discovering new flexomagnetic effects in quantum materials.
△ Less
Submitted 8 June, 2024;
originally announced June 2024.
-
Optimizing Geant4 Hadronic Models
Authors:
Krzysztof Genser,
Soon Yung Jun,
Alberto Ribon,
Vladimir Uzhinsky,
Julia Yarba
Abstract:
Geant4, the leading detector simulation toolkit used in high energy physics, employs a set of physics models to simulate interactions of particles with matter across a wide range of energies. These models, especially the hadronic ones, rely largely on directly measured cross-sections and inclusive characteristics, and use physically motivated parameters. However, they generally aim to cover a broa…
▽ More
Geant4, the leading detector simulation toolkit used in high energy physics, employs a set of physics models to simulate interactions of particles with matter across a wide range of energies. These models, especially the hadronic ones, rely largely on directly measured cross-sections and inclusive characteristics, and use physically motivated parameters. However, they generally aim to cover a broad range of possible simulation tasks and may not always be optimized for a particular process or a given material. The Geant4 collaboration recently made many parameters of the models accessible via a configuration interface. This opens a possibility to fit simulated distributions to the thin target experimental datasets and extract optimal values of the model parameters and the associated uncertainties. Such efforts are currently undertaken by the Geant4 collaboration with the goal of offering alternative sets of model parameters, also known as "tunes", for certain applications. The effort should subsequently lead to more accurate estimates of the systematic errors in physics measurements given the detector simulation role in performing the physics measurements. Results of the study are presented to illustrate how Geant4 model parameters can be optimized through applying fitting techniques, to improve the agreement between the Geant4 and the experimental data.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Effect of Pt vacancies on magnetotransport of Weyl semimetal candidate GdPtSb epitaxial films
Authors:
Dongxue Du,
Laxman Raju Thoutam,
Konrad T. Genser,
Chenyu Zhang,
Karin M. Rabe,
Bharat Jalan,
Paul M. Voyles,
Jason K. Kawasaki
Abstract:
We examine the effects of Pt vacancies on the magnetotransport properties of Weyl semimetal candidate GdPtSb films, grown by molecular beam epitaxy on c-plane sapphire. Rutherford backscattering spectrometry (RBS) and x-ray diffraction measurements suggest that phase pure GdPt$_{x}$Sb films can accommodate up to $15\%$ Pt vacancies ($x=0.85$), which act as acceptors as measured by Hall effect. Two…
▽ More
We examine the effects of Pt vacancies on the magnetotransport properties of Weyl semimetal candidate GdPtSb films, grown by molecular beam epitaxy on c-plane sapphire. Rutherford backscattering spectrometry (RBS) and x-ray diffraction measurements suggest that phase pure GdPt$_{x}$Sb films can accommodate up to $15\%$ Pt vacancies ($x=0.85$), which act as acceptors as measured by Hall effect. Two classes of electrical transport behavior are observed. Pt-deficient films display a metallic temperature dependent resistivity (d$ρ$/dT$>$0). The longitudinal magnetoresistance (LMR, magnetic field $\mathbf{B}$ parallel to electric field $\mathbf{E}$) is more negative than transverse magnetoresistance (TMR, $\mathbf{B} \perp \mathbf{E}$), consistent with the expected chiral anomaly for a Weyl semimetal. The combination of Pt-vacancy disorder and doping away from the expected Weyl nodes; however, suggests conductivity fluctuations may explain the negative LMR rather than chiral anomaly. Samples closer to stoichiometry display the opposite behavior: semiconductor-like resistivity (d$ρ$/dT$<$0) and more negative transverse magnetoresistance than longitudinal magnetoresistance. Hysteresis and other nonlinearities in the low field Hall effect and magnetoresistance suggest that spin disorder scattering, and possible topological Hall effect, may dominate the near stoichiometric samples. Our findings highlight the complications of transport-based identification of Weyl nodes, but point to possible topological spin textures in GdPtSb.
△ Less
Submitted 7 April, 2023;
originally announced April 2023.
-
Software and Computing for Small HEP Experiments
Authors:
Dave Casper,
Maria Elena Monzani,
Benjamin Nachman,
Costas Andreopoulos,
Stephen Bailey,
Deborah Bard,
Wahid Bhimji,
Giuseppe Cerati,
Grigorios Chachamis,
Jacob Daughhetee,
Miriam Diamond,
V. Daniel Elvira,
Alden Fan,
Krzysztof Genser,
Paolo Girotti,
Scott Kravitz,
Robert Kutschke,
Vincent R. Pascuzzi,
Gabriel N. Perdue,
Erica Snider,
Elizabeth Sexton-Kennedy,
Graeme Andrew Stewart,
Matthew Szydagis,
Eric Torrence,
Christopher Tunnell
Abstract:
This white paper briefly summarized key conclusions of the recent US Community Study on the Future of Particle Physics (Snowmass 2021) workshop on Software and Computing for Small High Energy Physics Experiments.
This white paper briefly summarized key conclusions of the recent US Community Study on the Future of Particle Physics (Snowmass 2021) workshop on Software and Computing for Small High Energy Physics Experiments.
△ Less
Submitted 27 December, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Detector and Beamline Simulation for Next-Generation High Energy Physics Experiments
Authors:
Sunanda Banerjee,
D. N. Brown,
David N. Brown,
Paolo Calafiura,
Jacob Calcutt,
Philippe Canal,
Miriam Diamond,
Daniel Elvira,
Thomas Evans,
Renee Fatemi,
Krzysztof Genser,
Robert Hatcher,
Alexander Himmel,
Seth R. Johnson,
Soon Yung Jun,
Michael Kelsey,
Evangelos Kourlitis,
Robert K. Kutschke,
Guilherme Lima,
Kevin Lynch,
Kendall Mahn,
Zachary Marshall,
Michael Mooney,
Adam Para,
Vincent R. Pascuzzi
, et al. (9 additional authors not shown)
Abstract:
The success of high energy physics programs relies heavily on accurate detector simulations and beam interaction modeling. The increasingly complex detector geometries and beam dynamics require sophisticated techniques in order to meet the demands of current and future experiments. Common software tools used today are unable to fully utilize modern computational resources, while data-recording rat…
▽ More
The success of high energy physics programs relies heavily on accurate detector simulations and beam interaction modeling. The increasingly complex detector geometries and beam dynamics require sophisticated techniques in order to meet the demands of current and future experiments. Common software tools used today are unable to fully utilize modern computational resources, while data-recording rates are often orders of magnitude larger than what can be produced via simulation. In this paper, we describe the state, current and future needs of high energy physics detector and beamline simulations and related challenges, and we propose a number of possible ways to address them.
△ Less
Submitted 20 April, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
HL-LHC Computing Review: Common Tools and Community Software
Authors:
HEP Software Foundation,
:,
Thea Aarrestad,
Simone Amoroso,
Markus Julian Atkinson,
Joshua Bendavid,
Tommaso Boccali,
Andrea Bocci,
Andy Buckley,
Matteo Cacciari,
Paolo Calafiura,
Philippe Canal,
Federico Carminati,
Taylor Childers,
Vitaliano Ciulli,
Gloria Corti,
Davide Costanzo,
Justin Gage Dezoort,
Caterina Doglioni,
Javier Mauricio Duarte,
Agnieszka Dziurda,
Peter Elmer,
Markus Elsing,
V. Daniel Elvira,
Giulio Eulisse
, et al. (85 additional authors not shown)
Abstract:
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc…
▽ More
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Epitaxy, exfoliation, and strain-induced magnetism in rippled Heusler membranes
Authors:
Dongxue Du,
Sebastian Manzo,
Chenyu Zhang,
Vivek Saraswat,
Konrad T. Genser,
Karin M. Rabe,
Paul M. Voyles,
Michael S. Arnold,
Jason K. Kawasaki
Abstract:
Single-crystalline membranes of functional materials enable the tuning of properties via extreme strain states; however, conventional routes for producing membranes require the use of sacrificial layers and chemical etchants, which can both damage the membrane and limit the ability to make them ultrathin. Here we demonstrate the epitaxial growth of the cubic Heusler compound GdPtSb on graphene-ter…
▽ More
Single-crystalline membranes of functional materials enable the tuning of properties via extreme strain states; however, conventional routes for producing membranes require the use of sacrificial layers and chemical etchants, which can both damage the membrane and limit the ability to make them ultrathin. Here we demonstrate the epitaxial growth of the cubic Heusler compound GdPtSb on graphene-terminated Al$_2$O$_3$ substrates. Despite the presence of the graphene interlayer, the Heusler films have epitaxial registry to the underlying sapphire, as revealed by x-ray diffraction, reflection high energy electron diffraction, and transmission electron microscopy. The weak Van der Waals interactions of graphene enable mechanical exfoliation to yield free-standing GdPtSb membranes, which form ripples when transferred to a flexible polymer handle. Whereas unstrained GdPtSb is antiferromagnetic, measurements on rippled membranes show a spontaneous magnetic moment at room temperature, with a saturation magnetization of 5.2 bohr magneton per Gd. First-principles calculations show that the coupling to homogeneous strain is too small to induce ferromagnetism, suggesting a dominant role for strain gradients. Our membranes provide a novel platform for tuning the magnetic properties of intermetallic compounds via strain (piezomagnetixm and magnetostriction) and strain gradients (flexomagnetism).
△ Less
Submitted 3 April, 2021; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Control of polymorphism during epitaxial growth of hyperferroelectric candidate LiZnSb on GaSb (111)B
Authors:
Dongxue Du,
Patrick J. Strohbeen,
Hanjong Paik,
Chenyu Zhang,
Konrad Genser,
Karin M. Rabe,
Paul M. Voyles,
Darrell G. Schlom,
Jason K. Kawasaki
Abstract:
A major challenge for ferroelectric devices is the depolarization field, which competes with and often destroys long-range polar order in the limit of ultrathin films. Recent theoretical predictions suggest a new class of materials, termed hyperferroelectics, that should be robust against the depolarization field and enable ferroelectricity down to the monolayer limit. Here we demonstrate the epit…
▽ More
A major challenge for ferroelectric devices is the depolarization field, which competes with and often destroys long-range polar order in the limit of ultrathin films. Recent theoretical predictions suggest a new class of materials, termed hyperferroelectics, that should be robust against the depolarization field and enable ferroelectricity down to the monolayer limit. Here we demonstrate the epitaxial growth of hexagonal LiZnSb, one of the hyperferroelectric candidate materials, by molecular-beam epitaxy on GaSb (111)B substrates. Due to the high volatility of all three atomic species, we find that LiZnSb can be grown in an adsorption-controlled window, using an excess zinc flux. Within this window, the desired polar hexagonal phase is stabilized with respect to a competing cubic polymorph, as revealed by X-ray diffraction and transmission electron microscopy measurements. First-principles calculations show that for moderate amounts of epitaxial strain and moderate concentrations of Li vacancies, the cubic LiZnSb phase is lower in formation energy than the hexagonal phase, but only by a few meV per formula unit. Therefore we suggest that kinetics plays a role in stabilizing the desired hexagonal phase at low temperatures. Our results provide a path towards experimentally demonstrating ferroelectricity and hyperferroelectricity in a new class of ternary intermetallic compounds.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Response to NITRD, NCO, NSF Request for Information on "Update to the 2016 National Artificial Intelligence Research and Development Strategic Plan"
Authors:
J. Amundson,
J. Annis,
C. Avestruz,
D. Bowring,
J. Caldeira,
G. Cerati,
C. Chang,
S. Dodelson,
D. Elvira,
A. Farahi,
K. Genser,
L. Gray,
O. Gutsche,
P. Harris,
J. Kinney,
J. B. Kowalkowski,
R. Kutschke,
S. Mrenna,
B. Nord,
A. Para,
K. Pedro,
G. N. Perdue,
A. Scheinker,
P. Spentzouris,
J. St. John
, et al. (5 additional authors not shown)
Abstract:
We present a response to the 2018 Request for Information (RFI) from the NITRD, NCO, NSF regarding the "Update to the 2016 National Artificial Intelligence Research and Development Strategic Plan." Through this document, we provide a response to the question of whether and how the National Artificial Intelligence Research and Development Strategic Plan (NAIRDSP) should be updated from the perspect…
▽ More
We present a response to the 2018 Request for Information (RFI) from the NITRD, NCO, NSF regarding the "Update to the 2016 National Artificial Intelligence Research and Development Strategic Plan." Through this document, we provide a response to the question of whether and how the National Artificial Intelligence Research and Development Strategic Plan (NAIRDSP) should be updated from the perspective of Fermilab, America's premier national laboratory for High Energy Physics (HEP). We believe the NAIRDSP should be extended in light of the rapid pace of development and innovation in the field of Artificial Intelligence (AI) since 2016, and present our recommendations below. AI has profoundly impacted many areas of human life, promising to dramatically reshape society --- e.g., economy, education, science --- in the coming years. We are still early in this process. It is critical to invest now in this technology to ensure it is safe and deployed ethically. Science and society both have a strong need for accuracy, efficiency, transparency, and accountability in algorithms, making investments in scientific AI particularly valuable. Thus far the US has been a leader in AI technologies, and we believe as a national Laboratory it is crucial to help maintain and extend this leadership. Moreover, investments in AI will be important for maintaining US leadership in the physical sciences.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
GEANT4 Parameter Tuning Using Professor
Authors:
V. Elvira,
L. Fields,
K. L. Genser,
R. Hatcher,
V. Ivanchenko,
M. Kelsey,
T. Koi,
G. N. Perdue,
A. Ribon,
V. Uzhinsky,
D. H. Wright,
J. Yarba,
S. Y. Jun
Abstract:
The Geant4 toolkit is used extensively in high energy physics to simulate the passage of particles through matter and to predict effects such as detector efficiencies and smearing. Geant4 uses many underlying models to predict particle interaction kinematics, and uncertainty in these models leads to uncertainty in high energy physics measurements. The Geant4 collaboration recently made free parame…
▽ More
The Geant4 toolkit is used extensively in high energy physics to simulate the passage of particles through matter and to predict effects such as detector efficiencies and smearing. Geant4 uses many underlying models to predict particle interaction kinematics, and uncertainty in these models leads to uncertainty in high energy physics measurements. The Geant4 collaboration recently made free parameters in some models accessible through partnership with Geant4 developers. We present a study of the impact of varying parameters in three Geant4 hadronic physics models on agreement with thin target datasets and describe fits to these datasets using the Professor model tuning framework. We find that varying parameters produces substantially better agreement with some datasets, but that more degrees of freedom are required for full agreement. This work is a first step towards a common framework for propagating uncertainties in Geant4 models to high energy physics measurements, and we outline future work required to complete that goal.
△ Less
Submitted 16 June, 2020; v1 submitted 14 October, 2019;
originally announced October 2019.
-
HEP Software Foundation Community White Paper Working Group - Detector Simulation
Authors:
HEP Software Foundation,
:,
J Apostolakis,
M Asai,
S Banerjee,
R Bianchi,
P Canal,
R Cenci,
J Chapman,
G Corti,
G Cosmo,
S Easo,
L de Oliveira,
A Dotti,
V Elvira,
S Farrell,
L Fields,
K Genser,
A Gheata,
M Gheata,
J Harvey,
F Hariri,
R Hatcher,
K Herner,
M Hildreth
, et al. (40 additional authors not shown)
Abstract:
A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation appl…
▽ More
A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation applications of HEP experiments and the improvements that will need to be made in order to meet the goals of future HEP experimental programmes. The scope of the topics covered includes the main components of a HEP simulation application, such as MC truth handling, geometry modeling, particle propagation in materials and fields, physics modeling of the interactions of particles with matter, the treatment of pileup and other backgrounds, as well as signal processing and digitisation. The resulting work programme described in this document focuses on the need to improve both the software performance and the physics of detector simulation. The goals are to increase the accuracy of the physics models and expand their applicability to future physics programmes, while achieving large factors in computing performance gains consistent with projections on available computing resources.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Mu2e Technical Design Report
Authors:
L. Bartoszek,
E. Barnes,
J. P. Miller,
J. Mott,
A. Palladino,
J. Quirk,
B. L. Roberts,
J. Crnkovic,
V. Polychronakos,
V. Tishchenko,
P. Yamin,
C. -h. Cheng,
B. Echenard,
K. Flood,
D. G. Hitlin,
J. H. Kim,
T. S. Miyashita,
F. C. Porter,
M. Röhrken,
J. Trevor,
R. -Y. Zhu,
E. Heckmaier,
T. I. Kang,
G. Lim,
W. Molzon
, et al. (238 additional authors not shown)
Abstract:
The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L…
▽ More
The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval.
△ Less
Submitted 16 March, 2015; v1 submitted 21 January, 2015;
originally announced January 2015.
-
Mu2e Conceptual Design Report
Authors:
The Mu2e Project,
Collaboration,
:,
R. J. Abrams,
D. Alezander,
G. Ambrosio,
N. Andreev,
C. M. Ankenbrandt,
D. M. Asner,
D. Arnold,
A. Artikov,
E. Barnes,
L. Bartoszek,
R. H. Bernstein,
K. Biery,
V. Biliyar,
R. Bonicalzi,
R. Bossert,
M. Bowden,
J. Brandt,
D. N. Brown,
J. Budagov,
M. Buehler,
A. Burov,
R. Carcagno
, et al. (203 additional authors not shown)
Abstract:
Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe…
▽ More
Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012.
△ Less
Submitted 29 November, 2012;
originally announced November 2012.
-
Data processing model for the CDF experiment
Authors:
J. Antos,
M. Babik,
D. Benjamin,
S. Cabrera,
A. W. Chan,
Y. C. Chen,
M. Coca,
B. Cooper,
S. Farrington,
K. Genser,
K. Hatakeyama,
S. Hou,
T. L. Hsieh,
B. Jayatilaka,
S. Y. Jun,
A. V. Kotwal,
A. C. Kraan,
R. Lysak,
I. V. Mandrichenko,
P. Murat,
A. Robson,
P. Savard,
M. Siket,
B. Stelzer,
J. Syu
, et al. (5 additional authors not shown)
Abstract:
The data processing model for the CDF experiment is described. Data processing reconstructs events from parallel data streams taken with different combinations of physics event triggers and further splits the events into datasets of specialized physics datasets. The design of the processing control system faces strict requirements on bookkeeping records, which trace the status of data files and…
▽ More
The data processing model for the CDF experiment is described. Data processing reconstructs events from parallel data streams taken with different combinations of physics event triggers and further splits the events into datasets of specialized physics datasets. The design of the processing control system faces strict requirements on bookkeeping records, which trace the status of data files and event contents during processing and storage. The computing architecture was updated to meet the mass data flow of the Run II data collection, recently upgraded to a maximum rate of 40 MByte/sec. The data processing facility consists of a large cluster of Linux computers with data movement managed by the CDF data handling system to a multi-petaByte Enstore tape library. The latest processing cycle has achieved a stable speed of 35 MByte/sec (3 TByte/day). It can be readily scaled by increasing CPU and data-handling capacity as required.
△ Less
Submitted 9 June, 2006; v1 submitted 5 June, 2006;
originally announced June 2006.
-
Data production models for the CDF experiment
Authors:
J. Antos,
M. Babik,
D. Benjamin,
S. Cabrera,
A. W. Chan,
Y. C. Chen,
M. Coca,
B. Cooper,
K. Genser,
K. Hatakeyama,
S. Hou,
T. L. Hsieh,
B. Jayatilaka,
A. C. Kraan,
R. Lysak,
I. V. Mandrichenko,
A. Robson,
M. Siket,
B. Stelzer,
J. Syu,
P. K. Teng,
S. C. Timm,
T. Tomura,
E. Vataga,
S. A. Wolbers
, et al. (1 additional authors not shown)
Abstract:
The data production for the CDF experiment is conducted on a large Linux PC farm designed to meet the needs of data collection at a maximum rate of 40 MByte/sec. We present two data production models that exploits advances in computing and communication technology. The first production farm is a centralized system that has achieved a stable data processing rate of approximately 2 TByte per day.…
▽ More
The data production for the CDF experiment is conducted on a large Linux PC farm designed to meet the needs of data collection at a maximum rate of 40 MByte/sec. We present two data production models that exploits advances in computing and communication technology. The first production farm is a centralized system that has achieved a stable data processing rate of approximately 2 TByte per day. The recently upgraded farm is migrated to the SAM (Sequential Access to data via Metadata) data handling system. The software and hardware of the CDF production farms has been successful in providing large computing and data throughput capacity to the experiment.
△ Less
Submitted 5 June, 2006;
originally announced June 2006.
-
Search for Top with D0 Detector in Dilepton Channel
Authors:
Krzysztof GENSER,
D0 Collaboration
Abstract:
Preliminary results from a search for high mass ttbar quark pair production in ppbar collisions at sqrt(s)=1.8TeV with the D0 detector in the ee+jets, emu+jets, and mumu+jets decay channels are presented. No conclusive evidence for top quark production for an integrated luminosity of 13.5+/-1.6pb-1 is observed.
Preliminary results from a search for high mass ttbar quark pair production in ppbar collisions at sqrt(s)=1.8TeV with the D0 detector in the ee+jets, emu+jets, and mumu+jets decay channels are presented. No conclusive evidence for top quark production for an integrated luminosity of 13.5+/-1.6pb-1 is observed.
△ Less
Submitted 12 October, 1994;
originally announced October 1994.
