-
A neural processing approach to quantum state discrimination
Authors:
Saeed A. Khan,
Fangjun Hu,
Gerasimos Angelatos,
Michael Hatridge,
Hakan E. Türeci
Abstract:
Although linear quantum amplification has proven essential to the processing of weak quantum signals, extracting higher-order quantum features such as correlations in principle demands nonlinear operations. However, nonlinear processing of quantum signals is often associated with non-idealities and excess noise, and absent a general framework to harness nonlinearity, such regimes are typically avo…
▽ More
Although linear quantum amplification has proven essential to the processing of weak quantum signals, extracting higher-order quantum features such as correlations in principle demands nonlinear operations. However, nonlinear processing of quantum signals is often associated with non-idealities and excess noise, and absent a general framework to harness nonlinearity, such regimes are typically avoided. Here we present a framework to uncover general quantum signal processing principles of a broad class of bosonic quantum nonlinear processors (QNPs), inspired by a remarkably analogous paradigm in nature: the processing of environmental stimuli by nonlinear, noisy neural ensembles, to enable perception. Using a quantum-coherent description of a QNP monitoring a quantum signal source, we show that quantum nonlinearity can be harnessed to calculate higher-order features of an incident quantum signal, concentrating them into linearly-measurable observables, a transduction not possible using linear amplifiers. Secondly, QNPs provide coherent nonlinear control over quantum fluctuations including their own added noise, enabling noise suppression in an observable without suppressing transduced information, a paradigm that bears striking similarities to optimal neural codings that allow perception even under highly stochastic neural dynamics. Unlike the neural case, we show that QNP-engineered noise distributions can exhibit non-classical correlations, providing a new means to harness resources such as entanglement. Finally, we show that even simple QNPs in realistic measurement chains can provide enhancements of signal-to-noise ratio for practical tasks such as quantum state discrimination. Our work provides pathways to utilize nonlinear quantum systems as general computation devices, and enables a new paradigm for nonlinear quantum information processing.
△ Less
Submitted 5 September, 2024;
originally announced September 2024.
-
Engineering a multi-level bath for transmon with three-wave mixing and parametric drives
Authors:
Xi Cao,
Maria Mucci,
Gangqiang Liu,
David Pekker,
Michael Hatridge
Abstract:
A photonic system with a tunable bath environment provides an extra degree of freedom for quantum simulators. Such a system can be realized by parametrically modulating the coupling between the system and bath. In this letter, by coupling a transmon qubit to a lossy Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) mode, we experimentally create a tunable chemical potential for the qu…
▽ More
A photonic system with a tunable bath environment provides an extra degree of freedom for quantum simulators. Such a system can be realized by parametrically modulating the coupling between the system and bath. In this letter, by coupling a transmon qubit to a lossy Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) mode, we experimentally create a tunable chemical potential for the qubit mode. We show that the qubit can be thermalized to equilibrium with different population distributions under different parametric pumping conditions. We further extend our method to the third level of the transmon, showing its practical use beyond the simple two-level case. Our results provide a useful tool that can be readily integrated with quantum simulators that would benefit from a non-trivial photon population distribution.
△ Less
Submitted 31 July, 2024;
originally announced July 2024.
-
Simple, High Saturation Power, Quantum-limited, RF SQUID Array-based Josephson Parametric Amplifiers
Authors:
Ryan Kaufman,
Chenxu Liu,
Katarina Cicak,
Boris Mesits,
Mingkang Xia,
Chao Zhou,
Maria Nowicki,
José Aumentado,
David Pekker,
Michael Hatridge
Abstract:
High-fidelity quantum non-demolition qubit measurement is critical to error correction and rapid qubit feedback in large-scale quantum computing. High-fidelity readout requires passing a short and strong pulse through the qubit's readout resonator, which is then processed by a sufficiently high bandwidth, high saturation power, and quantum-limited amplifier. We have developed a design pipeline tha…
▽ More
High-fidelity quantum non-demolition qubit measurement is critical to error correction and rapid qubit feedback in large-scale quantum computing. High-fidelity readout requires passing a short and strong pulse through the qubit's readout resonator, which is then processed by a sufficiently high bandwidth, high saturation power, and quantum-limited amplifier. We have developed a design pipeline that combines time-domain simulation of the un-truncated device Hamiltonian, fabrication constraints, and maximization of saturation power. We have realized an amplifier based on a modified NIST tri-layer Nb fabrication suite which utilizes an array of 25 radio frequency Superconducting QUantum Interference Devices (rf SQUIDs) embedded within a low-Q resonator powered by a high-power voltage pump delivered via a diplexer on the signal port. We show that, despite the intensity of the pump, the device is quantum-efficient and capable of high-fidelity measurement limited by state transitions in the transmon. We present experimental data demonstrating up to -91.2 dBm input saturation power with 20 dB gain, up to 28 MHz instantaneous bandwidth, and phase-preserving qubit measurements with 62% quantum efficiency.
△ Less
Submitted 21 May, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Pump-efficient Josephson parametric amplifiers with high saturation power
Authors:
Nicholas M. Hougland,
Zhuan Li,
Ryan Kaufman,
Boris Mesits,
Roger S. K. Mong,
Michael Hatridge,
David Pekker
Abstract:
Circuit QED based quantum information processing relies on low noise amplification for signal readout. In the realm of microwave superconducting circuits, this amplification is often achieved via Josephson parametric amplifiers (JPA). In the past, these amplifiers exhibited low power added efficiency (PAE), which is roughly the fraction of pump power that is converted to output signal power. This…
▽ More
Circuit QED based quantum information processing relies on low noise amplification for signal readout. In the realm of microwave superconducting circuits, this amplification is often achieved via Josephson parametric amplifiers (JPA). In the past, these amplifiers exhibited low power added efficiency (PAE), which is roughly the fraction of pump power that is converted to output signal power. This is increasingly relevant because recent attempts to build high saturation power amplifiers achieve this at the cost of very low PAE, which in turn puts a high heat load on the cryostat and limits the number of these devices that a dilution refrigerator can host. Here, we numerically investigate upper bounds on PAE. We focus on a class of parametric amplifiers that consists of a capacitor shunted by a nonlinear inductive block. We first set a benchmark for this class of amplifiers by considering nonlinear blocks described by an arbitrary polynomial current-phase relation. Next, we propose two circuit implementations of the nonlinear block. Finally, we investigate chaining polynomial amplifiers. We find that while amplifiers with higher gain have a lower PAE, regardless of the gain there is considerable room to improve as compared to state of the art devices. For example, for a phase-sensitive amplifier with a power gain of 20 dB, the PAE is ~0.1% for typical JPAs, 5.9% for our simpler circuit JPAs, 34% for our more complex circuit JPAs, 48% for our arbitrary polynomial amplifiers, and at least 95% for our chained amplifiers.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Experimental advances with the QICK (Quantum Instrumentation Control Kit) for superconducting quantum hardware
Authors:
Chunyang Ding,
Martin Di Federico,
Michael Hatridge,
Andrew Houck,
Sebastien Leger,
Jeronimo Martinez,
Connie Miao,
David I. Schuster,
Leandro Stefanazzi,
Chris Stoughton,
Sara Sussman,
Ken Treptow,
Sho Uemura,
Neal Wilcer,
Helin Zhang,
Chao Zhou,
Gustavo Cancelo
Abstract:
The QICK is a standalone open source qubit controller that was first introduced in 2022. In this follow-up work, we present recent experimental use cases that the QICK uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, pre-distorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fid…
▽ More
The QICK is a standalone open source qubit controller that was first introduced in 2022. In this follow-up work, we present recent experimental use cases that the QICK uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, pre-distorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fidelity parametric entangling gates. We explain in detail how the QICK was used to enable these experiments.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
Practical Trainable Temporal Postprocessor for Multistate Quantum Measurement
Authors:
Saeed A. Khan,
Ryan Kaufman,
Boris Mesits,
Michael Hatridge,
Hakan E. Türeci
Abstract:
We develop and demonstrate a trainable temporal post-processor (TPP) harnessing a simple but versatile machine learning algorithm to provide optimal processing of quantum measurement data subject to arbitrary noise processes, for the readout of an arbitrary number of quantum states. We demonstrate the TPP on the essential task of qubit state readout, which has historically relied on temporal proce…
▽ More
We develop and demonstrate a trainable temporal post-processor (TPP) harnessing a simple but versatile machine learning algorithm to provide optimal processing of quantum measurement data subject to arbitrary noise processes, for the readout of an arbitrary number of quantum states. We demonstrate the TPP on the essential task of qubit state readout, which has historically relied on temporal processing via matched filters in spite of their applicability only for specific noise conditions. Our results show that the TPP can reliably outperform standard filtering approaches under complex readout conditions, such as high power readout. Using simulations of quantum measurement noise sources, we show that this advantage relies on the TPP's ability to learn optimal linear filters that account for general quantum noise correlations in data, such as those due to quantum jumps, or correlated noise added by a phase-preserving quantum amplifier. Furthermore, we derive an exact analytic form for the optimal TPP weights: this positions the TPP as a linearly-scaling generalization of matched filtering, valid for an arbitrary number of states under the most general readout noise conditions, all while preserving a training complexity that is essentially negligible in comparison to that of training neural networks for processing temporal quantum measurement data. The TPP can be autonomously and reliably trained on measurement data and requires only linear operations, making it ideal for FPGA implementations in cQED for real-time processing of measurement data from general quantum systems.
△ Less
Submitted 27 July, 2024; v1 submitted 27 October, 2023;
originally announced October 2023.
-
MIRAGE: Quantum Circuit Decomposition and Routing Collaborative Design using Mirror Gates
Authors:
Evan McKinney,
Michael Hatridge,
Alex K. Jones
Abstract:
Building efficient large-scale quantum computers is a significant challenge due to limited qubit connectivities and noisy hardware operations. Transpilation is critical to ensure that quantum gates are on physically linked qubits, while minimizing $\texttt{SWAP}$ gates and simultaneously finding efficient decomposition into native $\textit{basis gates}$. The goal of this multifaceted optimization…
▽ More
Building efficient large-scale quantum computers is a significant challenge due to limited qubit connectivities and noisy hardware operations. Transpilation is critical to ensure that quantum gates are on physically linked qubits, while minimizing $\texttt{SWAP}$ gates and simultaneously finding efficient decomposition into native $\textit{basis gates}$. The goal of this multifaceted optimization step is typically to minimize circuit depth and to achieve the best possible execution fidelity. In this work, we propose $\textit{MIRAGE}$, a collaborative design and transpilation approach to minimize $\texttt{SWAP}$ gates while improving decomposition using $\textit{mirror gates}$. Mirror gates utilize the same underlying physical interactions, but when their outputs are reversed, they realize a different or $\textit{mirrored}$ quantum operation. Given the recent attention to $\sqrt{\texttt{iSWAP}}$ as a powerful basis gate with decomposition advantages over $\texttt{CNOT}$, we show how systems that implement the $\texttt{iSWAP}$ family of gates can benefit from mirror gates. Further, $\textit{MIRAGE}$ uses mirror gates to reduce routing pressure and reduce true circuit depth instead of just minimizing $\texttt{SWAP}$s. We explore the benefits of decomposition for $\sqrt{\texttt{iSWAP}}$ and $\sqrt[4]{\texttt{iSWAP}}$ using mirror gates, including both expanding Haar coverage and conducting a detailed fault rate analysis trading off circuit depth against approximate gate decomposition. We also describe a novel greedy approach accepting mirror substitution at different aggression levels within MIRAGE. Finally, for $\texttt{iSWAP}$ systems that use square-lattice topologies, $\textit{MIRAGE}$ provides an average of 29.6% reduction in circuit depth by eliminating an average of 59.9f% $\texttt{SWAP}$ gates, which ultimately improves the practical applicability of our algorithm.
△ Less
Submitted 10 August, 2023; v1 submitted 7 August, 2023;
originally announced August 2023.
-
Fast superconducting qubit control with sub-harmonic drives
Authors:
Mingkang Xia,
Chao Zhou,
Chenxu Liu,
Param Patel,
Xi Cao,
Pinlei Lu,
Boris Mesits,
Maria Mucci,
David Gorski,
David Pekker,
Michael Hatridge
Abstract:
Increasing the fidelity of single-qubit gates requires a combination of faster pulses and increased qubit coherence. However, with resonant qubit drive via a capacitively coupled port, these two objectives are mutually contradictory, as higher qubit quality factor requires a weaker coupling, necessitating longer pulses for the same applied power. Increasing drive power, on the other hand, can heat…
▽ More
Increasing the fidelity of single-qubit gates requires a combination of faster pulses and increased qubit coherence. However, with resonant qubit drive via a capacitively coupled port, these two objectives are mutually contradictory, as higher qubit quality factor requires a weaker coupling, necessitating longer pulses for the same applied power. Increasing drive power, on the other hand, can heat the qubit's environment and degrade coherence. In this work, by using the inherent non-linearity of the transmon qubit, we circumvent this issue by introducing a new parametric driving scheme to perform single-qubit control. Specifically, we achieve rapid gate speed by pumping the transmon's native Kerr term at approximately one third of the qubit's resonant frequency. Given that transmons typically operate within a fairly narrow range of anharmonicity, this technique is applicable to all transmons. In both theory and experiment, we show that the Rabi rate of the process is proportional to applied drive amplitude cubed, allowing for rapid gate speed with only modest increases in applied power. In addition, we demonstrate that filtering can be used to protect the qubit's coherence while performing rapid gates, and present theoretical calculations indicating that decay due to multi-photon losses, even in very strongly coupled drive lines, will not limit qubit lifetime. We demonstrate $π/2$ pulses as short as tens of nanoseconds with fidelity as high as 99.7\%, limited by the modest coherence of our transmon. We also present calculations indicating that this technique could reduce cryostat heating for fast gates, a vital requirement for large-scale quantum computers.
△ Less
Submitted 16 June, 2023;
originally announced June 2023.
-
Parallel Driving for Fast Quantum Computing Under Speed Limits
Authors:
Evan McKinney,
Chao Zhou,
Mingkang Xia,
Michael Hatridge,
Alex K. Jones
Abstract:
Increasing quantum circuit fidelity requires an efficient instruction set to avoid errors from decoherence. The choice of a two-qubit (2Q) hardware basis gate depends on a quantum modulator's native Hamiltonian interactions and applied control drives. In this paper, we propose a collaborative design approach to select the best ratio of drive parameters that determine the best basis gate for a part…
▽ More
Increasing quantum circuit fidelity requires an efficient instruction set to avoid errors from decoherence. The choice of a two-qubit (2Q) hardware basis gate depends on a quantum modulator's native Hamiltonian interactions and applied control drives. In this paper, we propose a collaborative design approach to select the best ratio of drive parameters that determine the best basis gate for a particular modulator. This requires considering the theoretical computing power of the gate along with the practical speed limit of that gate, given the modulator drive parameters. The practical speed limit arises from the couplers' tolerance for strong driving when one or more pumps is applied, for which some combinations can result in higher overall speed limits than others. Moreover, as this 2Q basis gate is typically applied multiple times in succession, interleaved by 1Q gates applied directly to the qubits, the speed of the 1Q gates can become a limiting factor for the quantum circuit. We propose a parallel-drive approach that drives the modulator and qubits simultaneously, allowing a richer capability of the 2Q basis gate and in some cases for this 1Q drive time to be absorbed entirely into the 2Q operation. This allows increasingly short duration 2Q gates while mitigating a significant source of overhead in some quantum systems. On average, this approach can decrease circuit duration by 17.84% and decrease infidelity for random 2Q gates by 10.5% compared to the best basic 2Q gate, $\sqrt{\texttt{iSWAP}}$.
△ Less
Submitted 8 March, 2023; v1 submitted 2 February, 2023;
originally announced February 2023.
-
Architectures for Multinode Superconducting Quantum Computers
Authors:
James Ang,
Gabriella Carini,
Yanzhu Chen,
Isaac Chuang,
Michael Austin DeMarco,
Sophia E. Economou,
Alec Eickbusch,
Andrei Faraon,
Kai-Mei Fu,
Steven M. Girvin,
Michael Hatridge,
Andrew Houck,
Paul Hilaire,
Kevin Krsulich,
Ang Li,
Chenxu Liu,
Yuan Liu,
Margaret Martonosi,
David C. McKay,
James Misewich,
Mark Ritter,
Robert J. Schoelkopf,
Samuel A. Stein,
Sara Sussman,
Hong X. Tang
, et al. (8 additional authors not shown)
Abstract:
Many proposals to scale quantum technology rely on modular or distributed designs where individual quantum processors, called nodes, are linked together to form one large multinode quantum computer (MNQC). One scalable method to construct an MNQC is using superconducting quantum systems with optical interconnects. However, a limiting factor of these machines will be internode gates, which may be t…
▽ More
Many proposals to scale quantum technology rely on modular or distributed designs where individual quantum processors, called nodes, are linked together to form one large multinode quantum computer (MNQC). One scalable method to construct an MNQC is using superconducting quantum systems with optical interconnects. However, a limiting factor of these machines will be internode gates, which may be two to three orders of magnitude noisier and slower than local operations. Surmounting the limitations of internode gates will require a range of techniques, including improvements in entanglement generation, the use of entanglement distillation, and optimized software and compilers, and it remains unclear how improvements to these components interact to affect overall system performance, what performance from each is required, or even how to quantify the performance of each. In this paper, we employ a `co-design' inspired approach to quantify overall MNQC performance in terms of hardware models of internode links, entanglement distillation, and local architecture. In the case of superconducting MNQCs with microwave-to-optical links, we uncover a tradeoff between entanglement generation and distillation that threatens to degrade performance. We show how to navigate this tradeoff, lay out how compilers should optimize between local and internode gates, and discuss when noisy quantum links have an advantage over purely classical links. Using these results, we introduce a roadmap for the realization of early MNQCs which illustrates potential improvements to the hardware and software of MNQCs and outlines criteria for evaluating the landscape, from progress in entanglement generation and quantum memory to dedicated algorithms such as distributed quantum phase estimation. While we focus on superconducting devices with optical interconnects, our approach is general across MNQC implementations.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Quantum-limited amplification without instability
Authors:
A. Metelmann,
O. Lanes,
T-Z. Chien,
A. McDonald,
M. Hatridge,
A. A. Clerk
Abstract:
Quantum parametric amplifiers typically generate by operating in proximity to a point of dynamical instability. We consider an alternate general strategy where quantum-limited, large-gain amplification is achieved without any proximity to a dynamical instability. Our basic mechanism (involving dynamics that conserves the number of squeezed photons) enables the design of a variety of one and two mo…
▽ More
Quantum parametric amplifiers typically generate by operating in proximity to a point of dynamical instability. We consider an alternate general strategy where quantum-limited, large-gain amplification is achieved without any proximity to a dynamical instability. Our basic mechanism (involving dynamics that conserves the number of squeezed photons) enables the design of a variety of one and two mode amplifiers that are not limited by any fundamental gain-bandwidth constraint. We focus on a particular realization that allows us to realize an ideal single-mode squeezing operation in transmission, and which has zero reflection. We present both a thorough theoretical analysis of this system (including pump-depletion effects), and also discuss results of an experimental superconducting quantum circuit implementation.
△ Less
Submitted 29 July, 2022;
originally announced August 2022.
-
Co-Designed Architectures for Modular Superconducting Quantum Computers
Authors:
Evan McKinney,
Mingkang Xia,
Chao Zhou,
Pinlei Lu,
Michael Hatridge,
Alex K. Jones
Abstract:
Noisy, Intermediate Scale Quantum (NISQ) computers have reached the point where they can show the potential for quantum advantage over classical computing. Unfortunately, NISQ machines introduce sufficient noise that even for moderate size quantum circuits the results can be unreliable. We propose a co-designed superconducting quantum computer using a Superconducting Nonlinear Asymmetric Inductive…
▽ More
Noisy, Intermediate Scale Quantum (NISQ) computers have reached the point where they can show the potential for quantum advantage over classical computing. Unfortunately, NISQ machines introduce sufficient noise that even for moderate size quantum circuits the results can be unreliable. We propose a co-designed superconducting quantum computer using a Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) modulator. The SNAIL modulator is designed by considering both the ideal fundamental qubit gate operation while maximizing the qubit coupling capabilities. First, the SNAIL natively implements $\sqrt[n]{\texttt{iSWAP}}$ gates realized through proportionally scaled pulse lengths. This naturally includes $\sqrt{\texttt{iSWAP}}$, which provides an advantage over $\texttt{CNOT}$ as a basis gate. Second, the SNAIL enables high-degree couplings that allow rich and highly parallel qubit connection topologies without suffering from frequency crowding. Building on our previously demonstrated SNAIL-based quantum state router we propose a quantum 4-ary tree and a hypercube inspired corral built from interconnected quantum modules. We compare their advantage in data movement based on necessary \texttt{SWAP} gates to the traditional lattice and heavy-hex lattice used in latest commercial quantum computers. We demonstrate the co-design advantage of our SNAIL-based machine with $\sqrt{\texttt{iSWAP}}$ basis gates and rich topologies against $\texttt{CNOT}$/heavy-hex and $\texttt{FSIM}$/lattice for 16-20 qubit and extrapolated designs circa 80 qubit architectures. We compare total circuit time and total gate count to understand fidelity for systems dominated by decoherence and control imperfections, respectively. Finally, we provide a gate duration sensitivity study on further decreasing the SNAIL pulse length to realize $\sqrt[n]{\texttt{iSWAP}}$ qubit systems to reduce decoherence times.
△ Less
Submitted 19 October, 2022; v1 submitted 9 May, 2022;
originally announced May 2022.
-
Realizing all-to-all couplings among detachable quantum modules using a microwave quantum state router
Authors:
Chao Zhou,
Pinlei Lu,
Matthieu Praquin,
Tzu-Chiao Chien,
Ryan Kaufman,
Xi Cao,
Mingkang Xia,
Roger Mong,
Wolfgang Pfaff,
David Pekker,
Michael Hatridge
Abstract:
One of the primary challenges in realizing large-scale quantum processors is the realization of qubit couplings that balance interaction strength, connectivity, and mode confinement. Moreover, it is very desirable for the device elements to be detachable, allowing components to be built, tested, and replaced independently. In this work, we present a microwave quantum state router, centered on para…
▽ More
One of the primary challenges in realizing large-scale quantum processors is the realization of qubit couplings that balance interaction strength, connectivity, and mode confinement. Moreover, it is very desirable for the device elements to be detachable, allowing components to be built, tested, and replaced independently. In this work, we present a microwave quantum state router, centered on parametrically driven, Josephson-junction based three-wave mixing, that realizes all-to-all couplings among four detachable quantum modules. We demonstrate coherent exchange among all four communication modes, with an average full-iSWAP time of 764ns and average inferred inter-module exchange fidelity of 0.969, limited by mode coherence. We also demonstrate photon transfer and pairwise entanglement between module qubits, and parallel operation of simultaneous iSWAP exchange across the router. Our router-module architecture serves as a prototype of modular quantum computer that has great potential for enabling flexible, demountable, large-scale quantum networks of superconducting qubits and cavities.
△ Less
Submitted 30 May, 2023; v1 submitted 14 September, 2021;
originally announced September 2021.
-
Proposal for a continuous wave laser with linewidth well below the standard quantum limit
Authors:
Chenxu Liu,
Maria Mucci,
Xi Cao,
M. V. Gurudev Dutt,
Michael Hatridge,
David Pekker
Abstract:
Due to their high coherence, a laser is a ubiquitous tool in science. We show that by engineering the coupling between the gain medium and the laser cavity as well as the laser cavity and the output port, it is possible to eliminate most of the noise due to photons entering as well as leaving the laser cavity. Hence, it is possible to reduce the laser linewidth by a factor equal to the number of p…
▽ More
Due to their high coherence, a laser is a ubiquitous tool in science. We show that by engineering the coupling between the gain medium and the laser cavity as well as the laser cavity and the output port, it is possible to eliminate most of the noise due to photons entering as well as leaving the laser cavity. Hence, it is possible to reduce the laser linewidth by a factor equal to the number of photons in the laser cavity below the standard quantum limit. We design and theoretically analyze a superconducting circuit that uses Josephson junctions, capacitors and inductors to implement a microwave laser, including the low-noise couplers that allow the design to surpass the standard quantum limit. Our proposal relies on the elements of superconducting quantum information, and thus is an example of how quantum engineering techniques can inspire us to re-imagine the limits of conventional quantum systems.
△ Less
Submitted 22 October, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Noise reduction in qubit readout with a two-mode squeezed interferometer
Authors:
G. Liu,
X. Cao,
T. -C. Chien,
C. Zhou,
P. Lu,
M. Hatridge
Abstract:
Fault-tolerant quantum information processing with flawed qubits and gates requires highly efficient, quantum non-demolition (QND) qubit readout. In superconducting circuits, qubit readout using coherent light with fidelity above 99% has been achieved by using quantum-limited parametric amplifiers such as the Josephson Parametric Converter (JPC). However, further improvement of such measurement is…
▽ More
Fault-tolerant quantum information processing with flawed qubits and gates requires highly efficient, quantum non-demolition (QND) qubit readout. In superconducting circuits, qubit readout using coherent light with fidelity above 99% has been achieved by using quantum-limited parametric amplifiers such as the Josephson Parametric Converter (JPC). However, further improvement of such measurement is fundamentally limited by the vacuum fluctuations of the coherent light used for readout. In this work we measure a transmon qubit/cavity system with an unbalanced two-mode squeezed light interferometer formed from two JPCs. The first amplifier generates two-mode squeezed vacuum at its output, which is coherently recombined by the second amplifier after one branch is shifted and displaced by the transmon's state after it interacts with the qubit/cavity system on one arm of the interferometer. We have observed a 31% improvement in power Signal-to-Noise Ratio (SNR) of projective readout compared to that of coherent light readout in the same system. To investigate the quantum properties of the two-mode squeezed light in the system, we also studied weak measurement and found, surprisingly, that tuning the interferometer to be as unprojective as possible was associated with an increase in the quantum efficiency of our readout relative to the optimum setting for projective measurement. These enhancements may enable remote entanglement with lower efficiency components in a system with qubits in both arms of the interferometer.
△ Less
Submitted 17 May, 2022; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Nearly quantum-limited Josephson-junction Frequency Comb synthesizer
Authors:
Pinlei Lu,
Saeed Khan,
Tzu-Chiao Chien,
Xi Cao,
Olivia T. Lanes,
Chao Zhou,
Hakan E. Türeci,
Michael J. Hatridge
Abstract:
While coherently-driven Kerr microcavities have rapidly matured as a platform for frequency comb formation, such microresonators generally possess weak Kerr coefficients; consequently, triggering comb generation requires millions of photons to be circulating inside the cavity. This suppresses the role of quantum fluctuations in the comb's dynamics. In this paper, we realize a minimal version of co…
▽ More
While coherently-driven Kerr microcavities have rapidly matured as a platform for frequency comb formation, such microresonators generally possess weak Kerr coefficients; consequently, triggering comb generation requires millions of photons to be circulating inside the cavity. This suppresses the role of quantum fluctuations in the comb's dynamics. In this paper, we realize a minimal version of coherently-driven Kerr-mediated microwave frequency combs in the circuit QED architecture, where the quantum vacuum's fluctuations are the primary limitation on comb coherence. We achieve a comb phase coherence of up to 35~$μ$s, approaching the theoretical device quantum limit of 55~$μ$s, and vastly longer than the modes' inherent lifetimes of 13~ns. The ability within cQED to engineer stronger nonlinearities than optical microresonators, together with operation at cryogenic temperatures, and excellent agreement of comb dynamics with quantum theory indicates a promising platform for the study of complex dynamics of quantum nonlinear systems
△ Less
Submitted 22 April, 2021; v1 submitted 20 May, 2020;
originally announced May 2020.
-
Optimizing Josephson-Ring-Modulator-based Josephson Parametric Amplifiers via full Hamiltonian control
Authors:
Chenxu Liu,
Tzu-Chiao Chien,
Michael Hatridge,
David Pekker
Abstract:
Josephson Parametric Amplifiers (JPA) are nonlinear devices that are used for quantum sensing and qubit readout in the microwave regime. While JPAs regularly operate in the quantum limit, their gain saturates for very small (few photons) input power. In a previous work, we showed that the saturation power of JPAs is not limited by pump depletion, but instead by the high-order nonlinearity of Josep…
▽ More
Josephson Parametric Amplifiers (JPA) are nonlinear devices that are used for quantum sensing and qubit readout in the microwave regime. While JPAs regularly operate in the quantum limit, their gain saturates for very small (few photons) input power. In a previous work, we showed that the saturation power of JPAs is not limited by pump depletion, but instead by the high-order nonlinearity of Josephson junctions, the nonlinear circuit elements that enable amplification in JPAs. Here, we present a systematic study of the nonlinearities in JPAs, we show which nonlinearities limit the saturation power, and present a strategy for optimizing the circuit parameters for achieving the best possible JPA. For concreteness, we focus on JPAs that are constructed around a Josephson Ring Modulator (JRM). We show that by tuning the external and shunt inductors, we should be able to take the best experimentally available JPAs and improve their saturation power by $\sim 15$ dB. Finally, we argue that our methods and qualitative results are applicable to a broad range of cavity based JPAs.
△ Less
Submitted 15 May, 2020; v1 submitted 25 November, 2019;
originally announced November 2019.
-
Superconducting Contact and Quantum Interference Between Two-Dimensional van der Waals and Three-Dimensional Conventional Superconductors
Authors:
Michael R. Sinko,
Sergio C. de la Barrera,
Olivia Lanes,
Kenji Watanabe,
Takashi Taniguchi,
Susheng Tan,
David Pekker,
Michael Hatridge,
Benjamin M. Hunt
Abstract:
Two-dimensional (2D) transition-metal dichalcogenide superconductors have unique and desirable properties for integration with conventional superconducting circuits. However, fully superconducting contact must be made between the 2D material and three-dimensional (3D) superconductors in order to employ the standard microwave drive and readout of qubits in such circuits. Here, we present a method f…
▽ More
Two-dimensional (2D) transition-metal dichalcogenide superconductors have unique and desirable properties for integration with conventional superconducting circuits. However, fully superconducting contact must be made between the 2D material and three-dimensional (3D) superconductors in order to employ the standard microwave drive and readout of qubits in such circuits. Here, we present a method for creating zero-resistance contacts between 2D NbSe$_2$ and 3D aluminum that behave as Josephson junctions (JJs) with large effective areas compared to 3D-3D JJs. We present a model for the supercurrent flow in a 2D-3D superconducting structure by numerical solution of the Ginzburg-Landau equations and find good agreement with experiment. These results demonstrate a crucial step towards a new generation of hybrid superconducting quantum circuits.
△ Less
Submitted 22 June, 2020; v1 submitted 21 November, 2019;
originally announced November 2019.
-
Quantum back-action of variable-strength measurement
Authors:
M. Hatridge,
S. Shankar,
M. Mirrahimi,
F. Schackert,
K. Geerlings,
T. Brecht,
K. M. Sliwa,
B. Abdo,
L. Frunzio,
S. M. Girvin,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depends on the quantity which is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrate this property using a superconducting qubit di…
▽ More
Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depends on the quantity which is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrate this property using a superconducting qubit dispersively coupled to a cavity traversed by a microwave signal. The back-action on the qubit state of a single measurement of both signal quadratures is observed and shown to produce a stochastic operation whose action is determined by the measurement result. This accurate monitoring of a qubit state is an essential prerequisite for measurement-based feedback control of quantum systems.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Multiparametric Amplification and Qubit Measurement with a Kerr-free Josephson Ring Modulator
Authors:
T. -C. Chien,
O. Lanes,
C. Liu,
X. Cao,
P. Lu,
S. Motz,
G. Liu,
D. Pekker,
M. Hatridge
Abstract:
Josephson-junction based parametric amplifiers have become a ubiquitous component in superconducting quantum machines. Although parametric amplifiers regularly achieve near-quantum limited performance, they have many limitations, including low saturation powers, lack of directionality, and narrow bandwidth. The first is believed to stem from the higher order Hamiltonian terms endemic to Josephson…
▽ More
Josephson-junction based parametric amplifiers have become a ubiquitous component in superconducting quantum machines. Although parametric amplifiers regularly achieve near-quantum limited performance, they have many limitations, including low saturation powers, lack of directionality, and narrow bandwidth. The first is believed to stem from the higher order Hamiltonian terms endemic to Josephson junction circuits, and the latter two are direct consequences of the nature of the parametric interactions which power them. In this work, we attack both of these issues. First, we have designed a new, linearly shunted Josephson Ring Modulator (JRM) which nearly nulls all 4th-order terms at a single flux bias point. Next, we achieve gain through a pair of balanced parametric drives. When applied separately, these drives produce phase-preserving gain (G) and gainless photon conversion (C), when applied together, the resultant amplifier (which we term GC) is a bi-directional, phase-sensitive transmission-only amplifier with a large, gain-independent bandwidth. Finally, we have also demonstrated the practical utility of the GC amplifier, as well as its' quantum efficiency, by using it to read out a superconducting transmon qubit.
△ Less
Submitted 20 December, 2019; v1 submitted 5 March, 2019;
originally announced March 2019.
-
Braidonium: a braiding quantum circuit based on the $4π$ Josephson effect
Authors:
John P. T. Stenger,
Michael Hatridge,
Sergey M. Frolov,
David Pekker
Abstract:
We propose a topological qubit in which braiding and readout are mediated by the $4π$ Majorana-Josephson effect. The braidonium device consists of three Majorana nanowires that come together to make a tri-junction; in order to control the superconducting phase differences at the tri-junction the nanowires are enclosed in a ring made of a conventional superconductor; and in order to perform initial…
▽ More
We propose a topological qubit in which braiding and readout are mediated by the $4π$ Majorana-Josephson effect. The braidonium device consists of three Majorana nanowires that come together to make a tri-junction; in order to control the superconducting phase differences at the tri-junction the nanowires are enclosed in a ring made of a conventional superconductor; and in order to perform initialization/readout one of the nanowires is coupled to a fluxonium qubit through a topological Josephson junction. We analyze how flux-based control and readout protocols can be used to demonstrate braiding and qubit operation for realistic materials and circuit parameters.
△ Less
Submitted 22 January, 2019; v1 submitted 9 August, 2018;
originally announced August 2018.
-
Generation of discord through a remote joint continuous variable measurement
Authors:
E. Zalys-Geller,
A. Narla,
S. Shankar,
M. Hatridge,
M. P. Silveri,
K. Sliwa,
Z. Leghtas,
M. H. Devoret
Abstract:
In quantum mechanics, continuously measuring an observable steers the system into one eigenstate of that observable. This property has interesting and useful consequences when the observable is a joint property of two remotely separated qubits. In particular, if the measurement of the two-qubit joint observable is performed in a way that is blind to single-qubit information, quantum back-action ge…
▽ More
In quantum mechanics, continuously measuring an observable steers the system into one eigenstate of that observable. This property has interesting and useful consequences when the observable is a joint property of two remotely separated qubits. In particular, if the measurement of the two-qubit joint observable is performed in a way that is blind to single-qubit information, quantum back-action generates correlation of the discord type even if the measurement is weak and inefficient. We demonstrate the ability to generate these quantum correlations in a circuit-QED setup by performing a weak joint readout of two remote, non-interacting, superconducting transmon qubits using the two non-degenerate modes of a Josephson Parametric Converter (JPC). Single-qubit information is erased from the output in the limit of large gain and with properly tailored cavity drive pulses. Our results of the measurement of discord are in quantitative agreement with theoretical predictions, and demonstrate the utility of the JPC as a which-qubit information eraser.
△ Less
Submitted 14 May, 2018; v1 submitted 3 March, 2018;
originally announced March 2018.
-
Simultaneous monitoring of fluxonium qubits in a waveguide
Authors:
A. Kou,
W. C. Smith,
U. Vool,
I. M. Pop,
K. M. Sliwa,
M. Hatridge,
L. Frunzio,
M. H. Devoret
Abstract:
Most quantum-error correcting codes assume that the decoherence of each physical qubit is independent of the decoherence of any other physical qubit. We can test the validity of this assumption in an experimental setup where a microwave feedline couples to multiple qubits by examining correlations between the qubits. Here, we investigate the correlations between fluxonium qubits located in a singl…
▽ More
Most quantum-error correcting codes assume that the decoherence of each physical qubit is independent of the decoherence of any other physical qubit. We can test the validity of this assumption in an experimental setup where a microwave feedline couples to multiple qubits by examining correlations between the qubits. Here, we investigate the correlations between fluxonium qubits located in a single waveguide. Despite being in a wide-bandwidth electromagnetic environment, the qubits have measured relaxation times in excess of 100 us. We use cascaded Josephson parametric amplifiers to measure the quantum jumps of two fluxonium qubits simultaneously. No correlations are observed between the relaxation times of the two fluxonium qubits, which indicates that the sources of relaxation are local to each qubit. Our architecture can easily be scaled to monitor larger numbers of qubits.
△ Less
Submitted 17 September, 2017; v1 submitted 16 May, 2017;
originally announced May 2017.
-
Josephson parametric converter saturation and higher order effects
Authors:
G. Liu,
T. -C. Chien,
X. Cao,
O. Lanes,
E. Alpern,
D. Pekker,
M. Hatridge
Abstract:
Microwave parametric amplifiers based on Josephson junctions have become a key component of many quantum information experiments. One key limitation which has not been well predicted by theory is the gain saturation behavior which determines its ability to process large amplitude signals. The typical explanation for this behavior in phase-preserving amplifiers based on three-wave mixing is pump de…
▽ More
Microwave parametric amplifiers based on Josephson junctions have become a key component of many quantum information experiments. One key limitation which has not been well predicted by theory is the gain saturation behavior which determines its ability to process large amplitude signals. The typical explanation for this behavior in phase-preserving amplifiers based on three-wave mixing is pump depletion, in which the consumption of pump photons to produce amplification results in a reduction in gain. However, in this work we present experimental data and theoretical calculations showing that the fourth-order Kerr nonlinearities inherent in the Josephson junctions are the dominant factor in the Josephson Parametric Converter (JPC). The Kerr-based theory has the unusual property of causing saturation to both lower and higher gains, depending on bias conditions. This work presents a new methodology for optimizing device performance in the presence of Kerr nonlinearities while retaining device tunability, and points to the necessity of controlling higher-order Hamiltonian terms to make further improvements in parametric devices.
△ Less
Submitted 4 September, 2017; v1 submitted 13 March, 2017;
originally announced March 2017.
-
Robust concurrent remote entanglement between two superconducting qubits
Authors:
A. Narla,
S. Shankar,
M. Hatridge,
Z. Leghtas,
K. M. Sliwa,
E. Zalys-Geller,
S. O. Mundhada,
W. Pfaff,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Entangling two remote quantum systems which never interact directly is an essential primitive in quantum information science and forms the basis for the modular architecture of quantum computing. When protocols to generate these remote entangled pairs rely on using traveling single photon states as carriers of quantum information, they can be made robust to photon losses, unlike schemes that rely…
▽ More
Entangling two remote quantum systems which never interact directly is an essential primitive in quantum information science and forms the basis for the modular architecture of quantum computing. When protocols to generate these remote entangled pairs rely on using traveling single photon states as carriers of quantum information, they can be made robust to photon losses, unlike schemes that rely on continuous variable states. However, efficiently detecting single photons is challenging in the domain of superconducting quantum circuits because of the low energy of microwave quanta. Here, we report the realization of a robust form of concurrent remote entanglement based on a novel microwave photon detector implemented in the superconducting circuit quantum electrodynamics (cQED) platform of quantum information. Remote entangled pairs with a fidelity of $0.57\pm0.01$ are generated at $200$ Hz. Our experiment opens the way for the implementation of the modular architecture of quantum computation with superconducting qubits.
△ Less
Submitted 8 August, 2016; v1 submitted 11 March, 2016;
originally announced March 2016.
-
Planar multilayer circuit quantum electrodynamics
Authors:
Z. K. Minev,
K. Serniak,
I. M. Pop,
Z. Leghtas,
K. Sliwa,
M. Hatridge,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Experimental quantum information processing with superconducting circuits is rapidly advancing, driven by innovation in two classes of devices, one involving planar micro-fabricated (2D) resonators, and the other involving machined three-dimensional (3D) cavities. We demonstrate that circuit quantum electrodynamics can be implemented in a multilayer superconducting structure that combines 2D and 3…
▽ More
Experimental quantum information processing with superconducting circuits is rapidly advancing, driven by innovation in two classes of devices, one involving planar micro-fabricated (2D) resonators, and the other involving machined three-dimensional (3D) cavities. We demonstrate that circuit quantum electrodynamics can be implemented in a multilayer superconducting structure that combines 2D and 3D advantages. We employ standard micro-fabrication techniques to pattern each layer, and rely on a vacuum gap between the layers to store the electromagnetic energy. Planar qubits are lithographically defined as an aperture in a conducting boundary of the resonators. We demonstrate the aperture concept by implementing an integrated, two cavity-modes, one transmon-qubit system.
△ Less
Submitted 29 May, 2016; v1 submitted 4 September, 2015;
originally announced September 2015.
-
Comparing and combining measurement-based and driven-dissipative entanglement stabilization
Authors:
Yehan Liu,
Shyam Shankar,
Nissim Ofek,
Michael Hatridge,
Anirudh Narla,
Katrina Sliwa,
Luigi Frunzio,
Robert J. Schoelkopf,
Michel H. Devoret
Abstract:
We demonstrate and contrast two approaches to the stabilization of qubit entanglement by feedback. Our demonstration is built on a feedback platform consisting of two superconducting qubits coupled to a cavity which are measured by a nearly-quantum-limited measurement chain and controlled by high-speed classical logic circuits. This platform is used to stabilize entanglement by two nominally disti…
▽ More
We demonstrate and contrast two approaches to the stabilization of qubit entanglement by feedback. Our demonstration is built on a feedback platform consisting of two superconducting qubits coupled to a cavity which are measured by a nearly-quantum-limited measurement chain and controlled by high-speed classical logic circuits. This platform is used to stabilize entanglement by two nominally distinct schemes: a "passive" reservoir engineering method and an "active" correction based on conditional parity measurements. In view of the instrumental roles that these two feedback paradigms play in quantum error-correction and quantum control, we directly compare them on the same experimental setup. Further, we show that a second layer of feedback can be added to each of these schemes, which heralds the presence of a high-fidelity entangled state in realtime. This "nested" feedback brings about a marked entanglement fidelity improvement without sacrificing success probability.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
A quantum memory with near-millisecond coherence in circuit QED
Authors:
Matthew Reagor,
Wolfgang Pfaff,
Christopher Axline,
Reinier W. Heeres,
Nissim Ofek,
Katrina Sliwa,
Eric Holland,
Chen Wang,
Jacob Blumoff,
Kevin Chou,
Michael J. Hatridge,
Luigi Frunzio,
Michel H. Devoret,
Liang Jiang,
Robert J. Schoelkopf
Abstract:
Significant advances in coherence have made superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by qubits, while maintaining superior coherence. We demonstrate a novel superconducting microwave cav…
▽ More
Significant advances in coherence have made superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by qubits, while maintaining superior coherence. We demonstrate a novel superconducting microwave cavity architecture that is highly robust against major sources of loss that are encountered in the engineering of circuit QED systems. The architecture allows for near-millisecond storage of quantum states in a resonator while strong coupling between the resonator and a transmon qubit enables control, encoding, and readout at MHz rates. The observed coherence times constitute an improvement of almost an order of magnitude over those of the best available superconducting qubits. Our design is an ideal platform for studying coherent quantum optics and marks an important step towards hardware-efficient quantum computing with Josephson junction-based quantum circuits.
△ Less
Submitted 25 August, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
Theory of remote entanglement via quantum-limited phase-preserving amplification
Authors:
Matti Silveri,
Evan Zalys-Geller,
Michael Hatridge,
Zaki Leghtas,
Michel H. Devoret,
S. M. Girvin
Abstract:
We show that a quantum-limited phase-preserving amplifier can act as a which-path information eraser when followed by heterodyne detection. This 'beam splitter with gain' implements a continuous joint measurement on the signal sources. As an application, we propose heralded concurrent remote entanglement generation between two qubits coupled dispersively to separate cavities. Dissimilar qubit-cavi…
▽ More
We show that a quantum-limited phase-preserving amplifier can act as a which-path information eraser when followed by heterodyne detection. This 'beam splitter with gain' implements a continuous joint measurement on the signal sources. As an application, we propose heralded concurrent remote entanglement generation between two qubits coupled dispersively to separate cavities. Dissimilar qubit-cavity pairs can be made indistinguishable by simple engineering of the cavity driving fields providing further experimental flexibility and the prospect for scalability. Additionally, we find an analytic solution for the stochastic master equation, a quantum filter, yielding a thorough physical understanding of the nonlinear measurement process leading to an entangled state of the qubits. We determine the concurrence of the entangled states and analyze its dependence on losses and measurement inefficiencies.
△ Less
Submitted 7 June, 2016; v1 submitted 2 July, 2015;
originally announced July 2015.
-
Violating Bell's inequality with an artificial atom and a cat state in a cavity
Authors:
Brian Vlastakis,
Andrei Petrenko,
Nissim Ofek,
Luayn Sun,
Zaki Leghtas,
Katrina Sliwa,
Yehan Liu,
Michael Hatridge,
Jacob Blumoff,
Luigi Frunzio,
Mazyar Mirrahimi,
Liang Jiang,
M. H. Devoret,
R. J. Schoelkopf
Abstract:
The `Schrödinger's cat' thought experiment highlights the counterintuitive facet of quantum theory that entanglement can exist between microscopic and macroscopic systems, producing a superposition of distinguishable states like the fictitious cat that is both alive and dead. The hallmark of entanglement is the detection of strong correlations between systems, for example by the violation of Bell'…
▽ More
The `Schrödinger's cat' thought experiment highlights the counterintuitive facet of quantum theory that entanglement can exist between microscopic and macroscopic systems, producing a superposition of distinguishable states like the fictitious cat that is both alive and dead. The hallmark of entanglement is the detection of strong correlations between systems, for example by the violation of Bell's inequality. Using the CHSH variant of the Bell test, this violation has been observed with photons, atoms, solid state spins, and artificial atoms in superconducting circuits. For larger, more distinguishable states, the conflict between quantum predictions and our classical expectations is typically resolved due to the rapid onset of decoherence. To investigate this reconciliation, one can employ a superposition of coherent states in an oscillator, known as a cat state. In contrast to discrete systems, one can continuously vary the size of the prepared cat state and therefore its dependence on decoherence. Here we demonstrate and quantify entanglement between an artificial atom and a cat state in a cavity, which we call a `Bell-cat' state. We use a circuit QED architecture, high-fidelity measurements, and real-time feedback control to violate Bell's inequality without post-selection or corrections for measurement inefficiencies. Furthermore, we investigate the influence of decoherence by continuously varying the size of created Bell-cat states and characterize the entangled system by joint Wigner tomography. These techniques provide a toolset for quantum information processing with entangled qubits and resonators. While recent results have demonstrated a high level of control of such systems, this experiment demonstrates that information can be extracted efficiently and with high fidelity, a crucial requirement for quantum computing with resonators.
△ Less
Submitted 9 April, 2015;
originally announced April 2015.
-
The reconfigurable Josephson circulator/directional amplifier
Authors:
K. M. Sliwa,
M. Hatridge,
A. Narla,
S. Shankar,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Circulators and directional amplifiers are crucial non-reciprocal signal routing and processing components involved in microwave readout chains for a variety of applications. They are particularly important in the field of superconducting quantum information, where the devices also need to have minimal photon losses to preserve the quantum coherence of signals. Conventional commercial implementati…
▽ More
Circulators and directional amplifiers are crucial non-reciprocal signal routing and processing components involved in microwave readout chains for a variety of applications. They are particularly important in the field of superconducting quantum information, where the devices also need to have minimal photon losses to preserve the quantum coherence of signals. Conventional commercial implementations of each device suffer from losses and are built from very different physical principles, which has led to separate strategies for the construction of their quantum-limited versions. However, as recently proposed theoretically, by establishing simultaneous pairwise conversion and/or gain processes between three modes of a Josephson-junction based superconducting microwave circuit, it is possible to endow the circuit with the functions of either a phase-preserving directional amplifier or a circulator. Here, we experimentally demonstrate these two modes of operation of the same circuit. Furthermore, in the directional amplifier mode, we show that the noise performance is comparable to standard non-directional superconducting amplifiers, while in the circulator mode, we show that the sense of circulation is fully reversible. Our device is far simpler in both modes of operation than previous proposals and implementations, requiring only three microwave pumps. It offers the advantage of flexibility, as it can dynamically switch between modes of operation as its pump conditions are changed. Moreover, by demonstrating that a single three-wave process yields non-reciprocal devices with reconfigurable functions, our work breaks the ground for the development of future, more-complex directional circuits, and has excellent prospects for on-chip integration.
△ Less
Submitted 27 October, 2015; v1 submitted 28 February, 2015;
originally announced March 2015.
-
Confining the state of light to a quantum manifold by engineered two-photon loss
Authors:
Zaki Leghtas,
Steven Touzard,
Ioan M. Pop,
Angela Kou,
Brian Vlastakis,
Andrei Petrenko,
Katrina M. Sliwa,
Anirudh Narla,
Shyam Shankar,
Michael J. Hatridge,
Matthew Reagor,
Luigi Frunzio,
Robert J. Schoelkopf,
Mazyar Mirrahimi,
Michel H. Devoret
Abstract:
Physical systems usually exhibit quantum behavior, such as superpositions and entanglement, only when they are sufficiently decoupled from a lossy environment. Paradoxically, a specially engineered interaction with the environment can become a resource for the generation and protection of quantum states. This notion can be generalized to the confinement of a system into a manifold of quantum state…
▽ More
Physical systems usually exhibit quantum behavior, such as superpositions and entanglement, only when they are sufficiently decoupled from a lossy environment. Paradoxically, a specially engineered interaction with the environment can become a resource for the generation and protection of quantum states. This notion can be generalized to the confinement of a system into a manifold of quantum states, consisting of all coherent superpositions of multiple stable steady states. We have experimentally confined the state of a harmonic oscillator to the quantum manifold spanned by two coherent states of opposite phases. In particular, we have observed a Schrodinger cat state spontaneously squeeze out of vacuum, before decaying into a classical mixture. This was accomplished by designing a superconducting microwave resonator whose coupling to a cold bath is dominated by photon pair exchange. This experiment opens new avenues in the fields of nonlinear quantum optics and quantum information, where systems with multi-dimensional steady state manifolds can be used as error corrected logical qubits.
△ Less
Submitted 15 December, 2014;
originally announced December 2014.
-
Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations
Authors:
Uri Vool,
Ioan M. Pop,
Katrina Sliwa,
Baleegh Abdo,
Chen Wang,
Teresa Brecht,
Yvonne Y. Gao,
Shyam Shankar,
Michael Hatridge,
Gianluigi Catelani,
Mazyar Mirrahimi,
Luigi Frunzio,
Robert J. Schoelkopf,
Leonid I. Glazman,
Michel H. Devoret
Abstract:
As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxa…
▽ More
As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxation is dominated by quasiparticle loss. Resolution on the scale of a single quasiparticle is obtained by performing quantum non-demolition projective measurements within a time interval much shorter than $T_1$, using a quantum limited amplifier (Josephson Parametric Converter). The quantum jumps statistics switches between the expected Poisson distribution and a non-Poissonian one, indicating large relative fluctuations in the quasiparticle population, on time scales varying from seconds to hours. This dynamics can be modified controllably by injecting quasiparticles or by seeding quasiparticle-trapping vortices by cooling down in magnetic field.
△ Less
Submitted 9 December, 2014; v1 submitted 6 June, 2014;
originally announced June 2014.
-
Wireless Josephson Amplifier
Authors:
A. Narla,
K. M. Sliwa,
M. Hatridge,
S. Shankar,
L. Frunzio,
R. J. Schoelkopf,
M. H. Devoret
Abstract:
Josephson junction parametric amplifiers are playing a crucial role in the readout chain in superconducting quantum information experiments. However, their integration with current 3D cavity implementations poses the problem of transitioning between waveguide, coax cables and planar circuits. Moreover, Josephson amplifiers require auxiliary microwave components, like directional couplers and/or hy…
▽ More
Josephson junction parametric amplifiers are playing a crucial role in the readout chain in superconducting quantum information experiments. However, their integration with current 3D cavity implementations poses the problem of transitioning between waveguide, coax cables and planar circuits. Moreover, Josephson amplifiers require auxiliary microwave components, like directional couplers and/or hybrids, that are sources of spurious losses and impedance mismatches that limit measurement efficiency and amplifier tunability. We have developed a new wireless architecture for these parametric amplifiers that eliminates superfluous microwave components and interconnects. This greatly simplifies their assembly and integration into experiments. We present an experimental realization of such a device operating in the $9-11$ GHz band with about $100$ MHz of amplitude gain-bandwidth product, on par with devices mounted in conventional sample holders. The simpler impedance environment presented to the amplifier also results in increased amplifier tunability.
△ Less
Submitted 21 July, 2014; v1 submitted 19 April, 2014;
originally announced April 2014.
-
Josephson directional amplifier for quantum measurement of superconducting circuits
Authors:
Baleegh Abdo,
Katrina Sliwa,
S. Shankar,
Michael Hatridge,
Luigi Frunzio,
Robert Schoelkopf,
Michel Devoret
Abstract:
We have realized a microwave quantum-limited amplifier that is directional and can therefore function without the front circulator needed in many quantum measurements. The amplification takes place in only one direction between the input and output ports. Directionality is achieved by multi-pump parametric amplification combined with wave interference. We have verified the device noise performance…
▽ More
We have realized a microwave quantum-limited amplifier that is directional and can therefore function without the front circulator needed in many quantum measurements. The amplification takes place in only one direction between the input and output ports. Directionality is achieved by multi-pump parametric amplification combined with wave interference. We have verified the device noise performances by using it to readout a superconducting qubit and observed quantum jumps. With an improved version of this device, qubit and preamplifer could be integrated on the same chip.
△ Less
Submitted 21 November, 2013;
originally announced November 2013.
-
Tracking Photon Jumps with Repeated Quantum Non-Demolition Parity Measurements
Authors:
L. Sun,
A. Petrenko,
Z. Leghtas,
B. Vlastakis,
G. Kirchmair,
K. M. Sliwa,
A. Narla,
M. Hatridge,
S. Shankar,
J. Blumoff,
L. Frunzio,
M. Mirrahimi,
M. H. Devoret,
R. J. Schoelkopf
Abstract:
Quantum error correction (QEC) is required for a practical quantum computer because of the fragile nature of quantum information. In QEC, information is redundantly stored in a large Hilbert space and one or more observables must be monitored to reveal the occurrence of an error, without disturbing the information encoded in an unknown quantum state. Such observables, typically multi-qubit paritie…
▽ More
Quantum error correction (QEC) is required for a practical quantum computer because of the fragile nature of quantum information. In QEC, information is redundantly stored in a large Hilbert space and one or more observables must be monitored to reveal the occurrence of an error, without disturbing the information encoded in an unknown quantum state. Such observables, typically multi-qubit parities such as <XXXX>, must correspond to a special symmetry property inherent to the encoding scheme. Measurements of these observables, or error syndromes, must also be performed in a quantum non-demolition (QND) way and faster than the rate at which errors occur. Previously, QND measurements of quantum jumps between energy eigenstates have been performed in systems such as trapped ions, electrons, cavity quantum electrodynamics (QED), nitrogen-vacancy (NV) centers, and superconducting qubits. So far, however, no fast and repeated monitoring of an error syndrome has been realized. Here, we track the quantum jumps of a possible error syndrome, the photon number parity of a microwave cavity, by mapping this property onto an ancilla qubit. This quantity is just the error syndrome required in a recently proposed scheme for a hardware-efficient protected quantum memory using Schrödinger cat states in a harmonic oscillator. We demonstrate the projective nature of this measurement onto a parity eigenspace by observing the collapse of a coherent state onto even or odd cat states. The measurement is fast compared to the cavity lifetime, has a high single-shot fidelity, and has a 99.8% probability per single measurement of leaving the parity unchanged. In combination with the deterministic encoding of quantum information in cat states realized earlier, our demonstrated QND parity tracking represents a significant step towards implementing an active system that extends the lifetime of a quantum bit.
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
Stabilizing entanglement autonomously between two superconducting qubits
Authors:
S. Shankar,
M. Hatridge,
Z. Leghtas,
K. M. Sliwa,
A. Narla,
U. Vool,
S. M. Girvin,
L. Frunzio,
M. Mirrahimi,
M. H. Devoret
Abstract:
Quantum error-correction codes would protect an arbitrary state of a multi-qubit register against decoherence-induced errors, but their implementation is an outstanding challenge for the development of large-scale quantum computers. A first step is to stabilize a non-equilibrium state of a simple quantum system such as a qubit or a cavity mode in the presence of decoherence. Several groups have re…
▽ More
Quantum error-correction codes would protect an arbitrary state of a multi-qubit register against decoherence-induced errors, but their implementation is an outstanding challenge for the development of large-scale quantum computers. A first step is to stabilize a non-equilibrium state of a simple quantum system such as a qubit or a cavity mode in the presence of decoherence. Several groups have recently accomplished this goal using measurement-based feedback schemes. A next step is to prepare and stabilize a state of a composite system. Here we demonstrate the stabilization of an entangled Bell state of a quantum register of two superconducting qubits for an arbitrary time. Our result is achieved by an autonomous feedback scheme which combines continuous drives along with a specifically engineered coupling between the two-qubit register and a dissipative reservoir. Similar autonomous feedback techniques have recently been used for qubit reset and the stabilization of a single qubit state, as well as for creating and stabilizing states of multipartite quantum systems. Unlike conventional, measurement-based schemes, an autonomous approach counter-intuitively uses engineered dissipation to fight decoherence, obviating the need for a complicated external feedback loop to correct errors, simplifying implementation. Instead the feedback loop is built into the Hamiltonian such that the steady state of the system in the presence of drives and dissipation is a Bell state, an essential building-block state for quantum information processing. Such autonomous schemes, broadly applicable to a variety of physical systems as demonstrated by a concurrent publication with trapped ion qubits, will be an essential tool for the implementation of quantum-error correction.
△ Less
Submitted 23 October, 2013; v1 submitted 16 July, 2013;
originally announced July 2013.
-
Stabilizing a Bell state of two superconducting qubits by dissipation engineering
Authors:
Z. Leghtas,
U. Vool,
S. Shankar,
M. Hatridge,
S. M. Girvin,
M. H. Devoret,
M. Mirrahimi
Abstract:
We propose a dissipation engineering scheme that prepares and protects a maximally entangled state of a pair of superconducting qubits. This is done by off-resonantly coupling the two qubits to a low-Q cavity mode playing the role of a dissipative reservoir. We engineer this coupling by applying six continuous-wave microwave drives with appropriate frequencies. The two qubits need not be identical…
▽ More
We propose a dissipation engineering scheme that prepares and protects a maximally entangled state of a pair of superconducting qubits. This is done by off-resonantly coupling the two qubits to a low-Q cavity mode playing the role of a dissipative reservoir. We engineer this coupling by applying six continuous-wave microwave drives with appropriate frequencies. The two qubits need not be identical. We show that our approach does not require any fine-tuning of the parameters and requires only that certain ratios between them be large. With currently achievable coherence times, simulations indicate that a Bell state can be maintained over arbitrary long times with fidelities above 94%. Such performance leads to a significant violation of Bell's inequality (CHSH correlation larger than 2.6) for arbitrary long times.
△ Less
Submitted 15 March, 2013;
originally announced March 2013.
-
Three-wave mixing with three incoming waves: Signal-Idler Coherent Cancellation and Gain Enhancement in a Parametric Amplifier
Authors:
Flavius Schackert,
Ananda Roy,
Michael Hatridge,
A. Douglas Stone,
Michel H. Devoret
Abstract:
Coherent, purely-dispersive three-wave mixing systems in optics and superconducting microwave circuits can be operated as parametric amplifiers, generating from a pump wave at one frequency amplified signal and idler waves at lower frequencies. Here we demonstrate the reciprocal process using a Josephson amplifier in which coherently imposed signal and idler beams up-convert to the pump frequency.…
▽ More
Coherent, purely-dispersive three-wave mixing systems in optics and superconducting microwave circuits can be operated as parametric amplifiers, generating from a pump wave at one frequency amplified signal and idler waves at lower frequencies. Here we demonstrate the reciprocal process using a Josephson amplifier in which coherently imposed signal and idler beams up-convert to the pump frequency. For signal and idler beams strong enough to significantly deplete the pump, we show that this reciprocal process ("coherent cancellation") leads to large, phase-sensitive modulation and even enhancement of the amplifier gain, in good agreement with theoretical predictions.
△ Less
Submitted 8 January, 2013;
originally announced January 2013.
-
Full coherent frequency conversion between two microwave propagating modes
Authors:
Baleegh Abdo,
Katrina Sliwa,
Flavius Schackert,
Nicolas Bergeal,
Michael Hatridge,
Luigi Frunzio,
A. Douglas Stone,
Michel H. Devoret
Abstract:
We demonstrate full frequency conversion in the microwave domain using a Josephson three-wave mixing device pumped at the difference between the frequencies of its fundamental eigenmodes. By measuring the signal output as a function of the intensity and phase of the three input signal, idler and pump tones, we show that the device functions as a controllable three-wave beam-splitter/combiner for p…
▽ More
We demonstrate full frequency conversion in the microwave domain using a Josephson three-wave mixing device pumped at the difference between the frequencies of its fundamental eigenmodes. By measuring the signal output as a function of the intensity and phase of the three input signal, idler and pump tones, we show that the device functions as a controllable three-wave beam-splitter/combiner for propagating microwave modes, in accordance with theory. Losses at the full conversion point are found to be less than 10^-2. Potential applications of the device include quantum information transduction and realization of an ultra-sensitive interferometer with controllable feedback.
△ Less
Submitted 10 December, 2012;
originally announced December 2012.
-
Josephson Amplifier for Qubit Readout
Authors:
Baleegh Abdo,
Flavius Schackert,
Michael Hatridge,
Chad Rigetti,
Michel Devoret
Abstract:
We report on measurements of a Josephson amplifier (J-amp) suitable for quantum-state qubit readout in the microwave domain. It consists of two microstrip resonators which intersect at a Josephson ring modulator. A maximum gain of about 20 dB, a bandwidth of 9 MHz, and a center-frequency tunability of about 60 MHz with gain in excess of 10 dB have been attained for idler and signal of frequencies…
▽ More
We report on measurements of a Josephson amplifier (J-amp) suitable for quantum-state qubit readout in the microwave domain. It consists of two microstrip resonators which intersect at a Josephson ring modulator. A maximum gain of about 20 dB, a bandwidth of 9 MHz, and a center-frequency tunability of about 60 MHz with gain in excess of 10 dB have been attained for idler and signal of frequencies 6.4 GHz and 8.1 GHz, in accordance with theory. Maximum input power measurements of the J-amp show a relatively good agreement with theoretical prediction. We discuss how the amplifier characteristics can be improved.
△ Less
Submitted 24 October, 2011; v1 submitted 7 March, 2011;
originally announced March 2011.
-
Dispersive magnetometry with a quantum limited SQUID parametric amplifier
Authors:
M. Hatridge,
R. Vijay,
D. H. Slichter,
J. Clarke,
I. Siddiqi
Abstract:
There is currently fundamental and technological interest in measuring and manipulating nanoscale magnets, particularly in the quantum coherent regime. To observe the dynamics of such systems one requires a magnetometer with not only exceptional sensitivity but also high gain, wide bandwidth and low backaction. We demonstrate a dispersive magnetometer consisting of a two-junction SQUID in parallel…
▽ More
There is currently fundamental and technological interest in measuring and manipulating nanoscale magnets, particularly in the quantum coherent regime. To observe the dynamics of such systems one requires a magnetometer with not only exceptional sensitivity but also high gain, wide bandwidth and low backaction. We demonstrate a dispersive magnetometer consisting of a two-junction SQUID in parallel with an integrated, lumped-element capacitor. Input flux signals are encoded as a phase modulation of the microwave drive tone applied to the magnetometer, resulting in a single quadrature voltage signal. For strong drive power, the nonlinearity of the resonator results in quantum limited, phase sensitive parametric amplification of this signal, which improves flux sensitvity at the expense of bandwidth. \ Depending on the drive parameters, the device performance ranges from an effective flux noise of 0.29\textbf{}$μΦ_{0}$Hz$^{-\frac{1}{2}}$ and 20 MHz of signal bandwidth to a noise of 0.14 $μΦ_{0}$Hz$^{-\frac{1}{2}}$ and a bandwidth of 0.6 MHz. These results are in excellent agreement with our theoretical model.
△ Less
Submitted 13 December, 2010; v1 submitted 11 March, 2010;
originally announced March 2010.