-
$g_{9/2}$ neutron strength in the $N=29$ isotones and the $^{52}$Cr($d,p$)$^{53}$Cr reaction
Authors:
L. A. Riley,
D. T. Simms,
L. T. Baby,
A. L. Conley,
P. D. Cottle,
J. Esparza,
K. Hanselman,
I. C. S. Hay,
M. Heinze,
B. Kelly,
K. W. Kemper,
G. W. McCann,
R. Renom,
M. Spieker,
I. Wiedenhöver
Abstract:
We performed a measurement of the $^{52}$Cr$(d,p)^{53}$Cr reaction at 16 MeV using the Florida State University Super-Enge Split-Pole Spectrograph (SE-SPS) and observed 26 states. While all of the states observed here had been seen in previous $(d,p)$ experiments, we changed five $L$ assignments from those reported previously and determined $L$ values for nine states that had not had such assignme…
▽ More
We performed a measurement of the $^{52}$Cr$(d,p)^{53}$Cr reaction at 16 MeV using the Florida State University Super-Enge Split-Pole Spectrograph (SE-SPS) and observed 26 states. While all of the states observed here had been seen in previous $(d,p)$ experiments, we changed five $L$ assignments from those reported previously and determined $L$ values for nine states that had not had such assignments made previously.
The $g_{9/2}$ neutron strength observed in $^{53}$Cr in the present work and in the $N=29$ isotones $^{49}$Ca, $^{51}$Ti, and $^{55}$Fe via $(d,p)$ reactions is much smaller than the sum rule for this strength. Most of the observed $L=4$ strength in these nuclei is located in states near 4 MeV excitation energy. The remaining $g_{9/2}$ strength may be located in the continuum or may be fragmented among many bound states. A covariant density functional theory calculation provides support for the hypothesis that the $g_{9/2}$ neutron orbit is unbound in $^{53}$Cr. The ($α,^3$He) reaction may provide a more sensitive probe for the missing $g_{9/2}$ neutron strength. In addition, particle-$γ$ coincidence experiments may help resolve some remaining questions in this nucleus.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
$^{54}$Fe($d$,$p$)$^{55}$Fe and the evolution of single neutron energies in the $N=29$ isotones
Authors:
L. A. Riley,
I. C. S. Hay,
L. T. Baby,
A. L. Conley,
P. D. Cottle,
J. Esparza,
K. Hanselman,
B. Kelly,
K. W. Kemper,
K. T. Macon,
G. W. McCann,
M. W. Quirin,
R. Renom,
R. L. Saunders,
M. Spieker,
I. Wiedenhöver
Abstract:
A measurement of the $^{54}$Fe($d$,$p$)$^{55}$Fe reaction at 16 MeV was performed using the Florida State University Super-Enge Split-Pole Spectrograph to determine single-neutron energies for the $2p_{3/2}$, $2p_{1/2}$, $1f_{5/2}$, $1g_{9/2}$ and $2d_{5/2}$ orbits. Two states were observed that had not been observed in previous (d, p) measurements. In addition, we made angular momentum transfer,…
▽ More
A measurement of the $^{54}$Fe($d$,$p$)$^{55}$Fe reaction at 16 MeV was performed using the Florida State University Super-Enge Split-Pole Spectrograph to determine single-neutron energies for the $2p_{3/2}$, $2p_{1/2}$, $1f_{5/2}$, $1g_{9/2}$ and $2d_{5/2}$ orbits. Two states were observed that had not been observed in previous (d, p) measurements. In addition, we made angular momentum transfer, \textit{L}, assignments to four states and changed \textit{L} assignments from previous ($d$, $p$) measurements for nine more states. The spin-orbit splitting between the $2p_{3/2}$ and $2p_{1/2}$ orbits is similar to that in the other $N=29$ isotones and not close to zero as a previous measurement suggested. While the $1f_{5/2}$ single neutron energy is significantly lower in $^{55}$Fe than in $^{51}$Ti, as predicted by a covariant density functional theory calculation, the single-neutron energy for this orbit in $^{55}$Fe is more than 1 MeV higher than the calculation suggests, although it is only 400 keV above the $2p_{1/2}$ orbit. The summed spectroscopic strength we observed for the $1g_{9/2}$ orbit up to the single-neutron separation energy of 9.3 MeV is only 0.3. This is surprising because the $1g_{9/2}$ orbit is predicted by Togashi \textit{et al.} to be located only 5.5 MeV above the $2p_{3/2}$ orbit.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
The detection of an extremely bright fast radio burst in a phased array feed survey
Authors:
Keith Bannister,
Ryan Shannon,
Jean-Pierre Macquart,
Chris Flynn,
Philip Edwards,
Morgan O'Neill,
Stefan Osłowski,
Matthew Bailes,
Barak Zackay,
Nathan Clarke,
Larry D'Addario,
Richard Dodson,
Peter Hall,
Andrew Jameson,
Dayton Jones,
Robert Navarro,
Joseph Trinh,
James Allison,
Craig Anderson,
Martin Bell,
Aaron Chippendale,
Jordan Collier,
George Heald,
Ian Heywood,
Aidan Hotan
, et al. (31 additional authors not shown)
Abstract:
We report the detection of an ultra-bright fast radio burst (FRB) from a modest, 3.4-day pilot survey with the Australian Square Kilometre Array Pathfinder. The survey was conducted in a wide-field fly's-eye configuration using the phased-array-feed technology deployed on the array to instantaneously observe an effective area of $160$ deg$^2$, and achieve an exposure totaling $13200$ deg$^2$ hr. W…
▽ More
We report the detection of an ultra-bright fast radio burst (FRB) from a modest, 3.4-day pilot survey with the Australian Square Kilometre Array Pathfinder. The survey was conducted in a wide-field fly's-eye configuration using the phased-array-feed technology deployed on the array to instantaneously observe an effective area of $160$ deg$^2$, and achieve an exposure totaling $13200$ deg$^2$ hr. We constrain the position of FRB 170107 to a region $8'\times8'$ in size (90% containment) and its fluence to be $58\pm6$ Jy ms. The spectrum of the burst shows a sharp cutoff above $1400$ MHz, which could be either due to scintillation or an intrinsic feature of the burst. This confirms the existence of an ultra-bright ($>20$ Jy ms) population of FRBs.
△ Less
Submitted 23 May, 2017; v1 submitted 22 May, 2017;
originally announced May 2017.
-
The Australian Square Kilometre Array Pathfinder: Performance of the Boolardy Engineering Test Array
Authors:
D. McConnell,
J. R. Allison,
K. Bannister,
M. E. Bell,
H. E. Bignall,
A. P. Chippendale,
P. G. Edwards,
L. Harvey-Smith,
S. Hegarty,
I. Heywood,
A. W. Hotan,
B. T. Indermuehle,
E. Lenc,
J. Marvil,
A. Popping,
W. Raja,
J. E. Reynolds,
R. J. Sault,
P. Serra,
M. A. Voronkov,
M. Whiting,
S. W. Amy,
P. Axtens,
L. Ball,
T. J. Bateman
, et al. (49 additional authors not shown)
Abstract:
We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, a…
▽ More
We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, and the adaptations that have been made to the traditional calibration and imaging procedures in order to allow BETA to function as a multi-beam aperture synthesis telescope. We describe the commissioning of the instrument and present details of BETA's performance: sensitivity, beam characteristics, polarimetric properties and image quality. We summarise the astronomical science that it has produced and draw lessons from operating BETA that will be relevant to the commissioning and operation of the final ASKAP telescope.
△ Less
Submitted 2 August, 2016;
originally announced August 2016.
-
Recent Developments in Measuring Signal and Noise in Phased Array Feeds at CSIRO
Authors:
A. P. Chippendale,
D. McConnell,
K. Bannister,
N. Nikolic,
A. W. Hotan,
K. W. Smart,
R. D. Shaw,
D. B. Hayman,
S. G. Hay
Abstract:
We describe recent developments in measuring both signal and noise in phased array feeds for radio astronomy at CSIRO. We introduce new techniques including aperture array noise measurements with beamforming weights matched to a reflector's focal field. Weights are calculated via antenna-range and in-reflector measurements. We also describe the separation of system temperature and aperture efficie…
▽ More
We describe recent developments in measuring both signal and noise in phased array feeds for radio astronomy at CSIRO. We introduce new techniques including aperture array noise measurements with beamforming weights matched to a reflector's focal field. Weights are calculated via antenna-range and in-reflector measurements. We also describe the separation of system temperature and aperture efficiency via drift scans.
△ Less
Submitted 12 February, 2016; v1 submitted 1 February, 2016;
originally announced February 2016.
-
Wide-field broadband radio imaging with phased array feeds: a pilot multi-epoch continuum survey with ASKAP-BETA
Authors:
I. Heywood,
K. W. Bannister,
J. Marvil,
J. R. Allison,
L. Ball,
M. E. Bell,
D. C. -J. Bock,
M. Brothers,
J. D. Bunton,
A. P. Chippendale,
F. Cooray,
T. J. Cornwell,
D. DeBoer,
P. Edwards,
R. Gough,
N. Gupta,
L. Harvey-Smith,
S. Hay,
A. W. Hotan,
B. Indermuehle,
C. Jacka,
C. A. Jackson,
S. Johnston,
A. E. Kimball,
B. S. Koribalski
, et al. (23 additional authors not shown)
Abstract:
The Boolardy Engineering Test Array is a 6 x 12 m dish interferometer and the prototype of the Australian Square Kilometre Array Pathfinder (ASKAP), equipped with the first generation of ASKAP's phased array feed (PAF) receivers. These facilitate rapid wide-area imaging via the deployment of simultaneous multiple beams within a 30 square degree field of view. By cycling the array through 12 interl…
▽ More
The Boolardy Engineering Test Array is a 6 x 12 m dish interferometer and the prototype of the Australian Square Kilometre Array Pathfinder (ASKAP), equipped with the first generation of ASKAP's phased array feed (PAF) receivers. These facilitate rapid wide-area imaging via the deployment of simultaneous multiple beams within a 30 square degree field of view. By cycling the array through 12 interleaved pointing positions and using 9 digitally formed beams we effectively mimic a traditional 1 hour x 108 pointing survey, covering 150 square degrees over 711 - 1015 MHz in 12 hours of observing time. Three such observations were executed over the course of a week. We verify the full bandwidth continuum imaging performance and stability of the system via self-consistency checks and comparisons to existing radio data. The combined three epoch image has arcminute resolution and a 1-sigma thermal noise level of 375 micro-Jy per beam, although the effective noise is a factor 3 higher due to residual sidelobe confusion. From this we derive a catalogue of 3,722 discrete radio components, using the 35 percent fractional bandwidth to measure in-band spectral indices for 1,037 of them. A search for transient events reveals one significantly variable source within the survey area. The survey covers approximately two-thirds of the Spitzer South Pole Telescope Deep Field. This pilot project demonstrates the viability and potential of using PAFs to rapidly and accurately survey the sky at radio wavelengths.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
A pilot ASKAP survey of radio transient events in the region around the intermittent pulsar PSR J1107-5907
Authors:
G. Hobbs,
I. Heywood,
M. E. Bell,
M. Kerr,
A. Rowlinson,
S. Johnston,
R. M. Shannon,
M. A. Voronkov,
C. Ward,
J. Banyer,
P. J. Hancock,
Tara Murphy,
J. R. Allison,
S. W. Amy,
L. Ball,
K. Bannister,
D. C. -J. Bock,
D. Brodrick,
M. Brothers,
A. J. Brown,
J. D. Bunton,
J. Chapman,
A. P. Chippendale,
Y. Chung,
D. DeBoer
, et al. (53 additional authors not shown)
Abstract:
We use observations from the Boolardy Engineering Test Array (BETA) of the Australian Square Kilometre Array Pathfinder (ASKAP) telescope to search for transient radio sources in the field around the intermittent pulsar PSR J1107-5907. The pulsar is thought to switch between an "off" state in which no emission is detectable, a weak state and a strong state. We ran three independent transient detec…
▽ More
We use observations from the Boolardy Engineering Test Array (BETA) of the Australian Square Kilometre Array Pathfinder (ASKAP) telescope to search for transient radio sources in the field around the intermittent pulsar PSR J1107-5907. The pulsar is thought to switch between an "off" state in which no emission is detectable, a weak state and a strong state. We ran three independent transient detection pipelines on two-minute snapshot images from a 13 hour BETA observation in order to 1) study the emission from the pulsar, 2) search for other transient emission from elsewhere in the image and 3) to compare the results from the different transient detection pipelines. The pulsar was easily detected as a transient source and, over the course of the observations, it switched into the strong state three times giving a typical timescale between the strong emission states of 3.7 hours. After the first switch it remained in the strong state for almost 40 minutes. The other strong states lasted less than 4 minutes. The second state change was confirmed using observations with the Parkes radio telescope. No other transient events were found and we place constraints on the surface density of such events on these timescales. The high sensitivity Parkes observations enabled us to detect individual bright pulses during the weak state and to study the strong state over a wide observing band. We conclude by showing that future transient surveys with ASKAP will have the potential to probe the intermittent pulsar population.
△ Less
Submitted 8 December, 2015;
originally announced December 2015.
-
Measured Aperture-Array Noise Temperature of the Mark II Phased Array Feed for ASKAP
Authors:
A. P. Chippendale,
A. J. Brown,
R. J. Beresford,
G. A. Hampson,
R. D. Shaw,
D. B. Hayman,
A. Macleod,
A. R. Forsyth,
S. G. Hay,
M. Leach,
C. Cantrall,
M. L. Brothers,
A. W. Hotan
Abstract:
We have measured the aperture-array noise temperature of the first Mk. II phased array feed that CSIRO has built for the Australian Square Kilometre Array Pathfinder telescope. As an aperture array, the Mk. II phased array feed achieves a beam equivalent noise temperature less than 40 K from 0.78 GHz to 1.7 GHz and less than 50 K from 0.7 GHz to 1.8 GHz for a boresight beam directed at the zenith.…
▽ More
We have measured the aperture-array noise temperature of the first Mk. II phased array feed that CSIRO has built for the Australian Square Kilometre Array Pathfinder telescope. As an aperture array, the Mk. II phased array feed achieves a beam equivalent noise temperature less than 40 K from 0.78 GHz to 1.7 GHz and less than 50 K from 0.7 GHz to 1.8 GHz for a boresight beam directed at the zenith. We believe these are the lowest reported noise temperatures over these frequency ranges for ambient-temperature phased arrays. The measured noise temperature includes receiver electronics noise, ohmic losses in the array, and stray radiation from sidelobes illuminating the sky and ground away from the desired field of view. This phased array feed was designed for the Australian Square Kilometre Array Pathfinder to demonstrate fast astronomical surveys with a wide field of view for the Square Kilometre Array.
△ Less
Submitted 6 November, 2015; v1 submitted 17 September, 2015;
originally announced September 2015.
-
Measured Sensitivity of the First Mark II Phased Array Feed on an ASKAP Antenna
Authors:
A. P. Chippendale,
A. J. Brown,
R. J. Beresford,
G. A. Hampson,
A. Macleod,
R. D. Shaw,
M. L. Brothers,
C. Cantrall,
A. R. Forsyth,
S. G. Hay,
M. Leach
Abstract:
This paper presents the measured sensitivity of CSIRO's first Mk. II phased array feed (PAF) on an ASKAP antenna. The Mk. II achieves a minimum system-temperature-over-efficiency $T_\mathrm{sys}/η$ of 78 K at 1.23 GHz and is 95 K or better from 835 MHz to 1.8 GHz. This PAF was designed for the Australian SKA Pathfinder telescope to demonstrate fast astronomical surveys with a wide field of view fo…
▽ More
This paper presents the measured sensitivity of CSIRO's first Mk. II phased array feed (PAF) on an ASKAP antenna. The Mk. II achieves a minimum system-temperature-over-efficiency $T_\mathrm{sys}/η$ of 78 K at 1.23 GHz and is 95 K or better from 835 MHz to 1.8 GHz. This PAF was designed for the Australian SKA Pathfinder telescope to demonstrate fast astronomical surveys with a wide field of view for the Square Kilometre Array (SKA).
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
ASKAP HI imaging of the galaxy group IC 1459
Authors:
P. Serra,
B. Koribalski,
V. Kilborn,
J. R. Allison,
S. W. Amy,
L. Ball,
K. Bannister,
M. E. Bell,
D. C. -J. Bock,
R. Bolton,
M. Bowen,
B. Boyle,
S. Broadhurst,
D. Brodrick,
M. Brothers,
J. D. Bunton,
J. Chapman,
W. Cheng,
A. P. Chippendale,
Y. Chung,
F. Cooray,
T. Cornwell,
D. DeBoer,
P. Diamond,
R. Forsyth
, et al. (54 additional authors not shown)
Abstract:
We present HI imaging of the galaxy group IC 1459 carried out with six antennas of the Australian SKA Pathfinder equipped with phased-array feeds. We detect and resolve HI in eleven galaxies down to a column density of $\sim10^{20}$ cm$^{-2}$ inside a ~6 deg$^2$ field and with a resolution of ~1 arcmin on the sky and ~8 km/s in velocity. We present HI images, velocity fields and integrated spectra…
▽ More
We present HI imaging of the galaxy group IC 1459 carried out with six antennas of the Australian SKA Pathfinder equipped with phased-array feeds. We detect and resolve HI in eleven galaxies down to a column density of $\sim10^{20}$ cm$^{-2}$ inside a ~6 deg$^2$ field and with a resolution of ~1 arcmin on the sky and ~8 km/s in velocity. We present HI images, velocity fields and integrated spectra of all detections, and highlight the discovery of three HI clouds -- two in the proximity of the galaxy IC 5270 and one close to NGC 7418. Each cloud has an HI mass of $10^9$ M$_\odot$ and accounts for ~15% of the HI associated with its host galaxy. Available images at ultraviolet, optical and infrared wavelengths do not reveal any clear stellar counterpart of any of the clouds, suggesting that they are not gas-rich dwarf neighbours of IC 5270 and NGC 7418. Using Parkes data we find evidence of additional extended, low-column-density HI emission around IC 5270, indicating that the clouds are the tip of the iceberg of a larger system of gas surrounding this galaxy. This result adds to the body of evidence on the presence of intra-group gas within the IC 1459 group. Altogether, the HI found outside galaxies in this group amounts to several times $10^9$ M$_\odot$, at least 10% of the HI contained inside galaxies. This suggests a substantial flow of gas in and out of galaxies during the several billion years of the group's evolution.
△ Less
Submitted 14 June, 2015;
originally announced June 2015.
-
Discovery of HI gas in a young radio galaxy at $z = 0.44$ using the Australian Square Kilometre Array Pathfinder
Authors:
J. R. Allison,
E. M. Sadler,
V. A. Moss,
M. T. Whiting,
R. W. Hunstead,
M. B. Pracy,
S. J. Curran,
S. M. Croom,
M. Glowacki,
R. Morganti,
S. S. Shabala,
M. A. Zwaan,
G. Allen,
S. W. Amy,
P. Axtens,
L. Ball,
K. W. Bannister,
S. Barker,
M. E. Bell,
D. C. -J. Bock,
R. Bolton,
M. Bowen,
B. Boyle,
R. Braun,
S. Broadhurst
, et al. (78 additional authors not shown)
Abstract:
We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The…
▽ More
We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The absorption line is detected at $z = 0.44$ towards the GHz-peaked spectrum radio source PKS B1740$-$517 and demonstrates ASKAP's excellent capability for performing a future wide-field survey for HI absorption at these redshifts. Optical spectroscopy and imaging using the Gemini-South telescope indicates that the HI gas is intrinsic to the host galaxy of the radio source. The narrow OIII emission lines show clear double-peaked structure, indicating either large-scale outflow or rotation of the ionized gas. Archival data from the \emph{XMM-Newton} satellite exhibit an absorbed X-ray spectrum that is consistent with a high column density obscuring medium around the active galactic nucleus. The HI absorption profile is complex, with four distinct components ranging in width from 5 to 300 km s$^{-1}$ and fractional depths from 0.2 to 20 per cent. In addition to systemic HI gas, in a circumnuclear disc or ring structure aligned with the radio jet, we find evidence for a possible broad outflow of neutral gas moving at a radial velocity of $v \sim 300$ km s$^{-1}$. We infer that the expanding young radio source ($t_{\rm age} \approx 2500$ yr) is cocooned within a dense medium and may be driving circumnuclear neutral gas in an outflow of $\sim$ 1 $\mathrm{M}_{\odot}$ yr$^{-1}$.
△ Less
Submitted 16 August, 2015; v1 submitted 4 March, 2015;
originally announced March 2015.
-
The Australian Square Kilometre Array Pathfinder: System Architecture and Specifications of the Boolardy Engineering Test Array
Authors:
A. W. Hotan,
J. D. Bunton,
L. Harvey-Smith,
B. Humphreys,
B. D. Jeffs,
T. Shimwell,
J. Tuthill,
M. Voronkov,
G. Allen,
S. Amy,
K. Ardern,
P. Axtens,
L. Ball,
K. Bannister,
S. Barker,
T. Bateman,
R. Beresford,
D. Bock,
R. Bolton,
M. Bowen,
B. Boyle,
R. Braun,
S. Broadhurst,
D. Brodrick,
K. Brooks
, et al. (76 additional authors not shown)
Abstract:
This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interfe…
▽ More
This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least 9 dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations.
△ Less
Submitted 4 September, 2014;
originally announced September 2014.
-
Measuring Noise Temperatures of Phased-Array Antennas for Astronomy at CSIRO
Authors:
Aaron Chippendale,
Douglas Hayman,
Stuart Hay
Abstract:
We describe the development of a noise-temperature testing capability for phased-array antennas operating in receive mode from 0.7 GHz to 1.8 GHz. Sampled voltages from each array port were recorded digitally as the zenith-pointing array under test was presented with three scenes: (1) a large microwave absorber at ambient temperature, (2) the unobstructed radio sky, and (3) broadband noise transmi…
▽ More
We describe the development of a noise-temperature testing capability for phased-array antennas operating in receive mode from 0.7 GHz to 1.8 GHz. Sampled voltages from each array port were recorded digitally as the zenith-pointing array under test was presented with three scenes: (1) a large microwave absorber at ambient temperature, (2) the unobstructed radio sky, and (3) broadband noise transmitted from a reference antenna centred over and pointed at the array under test. The recorded voltages were processed in software to calculate the beam equivalent noise temperature for a maximum signal-to-noise ratio beam steered at the zenith. We introduced the reference-antenna measurement to make noise measurements with reproducible, well-defined beams directed at the zenith and thereby at the centre of the absorber target. We applied a detailed model of cosmic and atmospheric contributions to the radio sky emission that we used as a noise-temperature reference. We also present a comprehensive analysis of measurement uncertainty including random and systematic effects. The key systematic effect was due to uncertainty in the beamformed antenna pattern and how efficiently it illuminates the absorber load. We achieved a combined uncertainty as low as 4 K for a 40 K measurement of beam equivalent noise temperature. The measurement and analysis techniques described in this paper were pursued to support noise-performance verification of prototype phased-array feeds for the Australian Square Kilometre Array Pathfinder telescope.
△ Less
Submitted 6 February, 2014;
originally announced February 2014.