Design and characterisation of an antiproton deceleration beamline for the PUMA experiment
Authors:
J. Fischer,
A. Schmidt,
N. Azaryan,
F. Butin,
J. Ferreira Somoza,
A. Husson,
C. Klink,
A. Obertelli,
M. Schlaich,
A. Sinturel,
N. Thaus,
F. Wienholtz
Abstract:
We report on the design and characterization of an antiproton deceleration beamline, based on a pulsed drift tube, for the PUMA experiment at the Antimatter Factory at CERN. The design has been tailored to high-voltage (100 kV) and ultra-high vacuum (below $10^{-10}$ mbar) conditions. A first operation achieved decelerating antiprotons from an initial energy of 100 keV down to ($3898\pm 3$) eV, ma…
▽ More
We report on the design and characterization of an antiproton deceleration beamline, based on a pulsed drift tube, for the PUMA experiment at the Antimatter Factory at CERN. The design has been tailored to high-voltage (100 kV) and ultra-high vacuum (below $10^{-10}$ mbar) conditions. A first operation achieved decelerating antiprotons from an initial energy of 100 keV down to ($3898\pm 3$) eV, marking the initial stage in trapping antiprotons for the PUMA experiment. Employing a high-voltage ramping scheme, the pressure remains below $2\cdot 10^{-10}$ mbar upstream of the pulsed drift tube for 75% of the cycle time. The beamline reached a transmission of ($55 \pm 3$)% for antiprotons decelerated to 4 keV. The beam is focused on a position sensitive detector to a spot with horizontal and vertical standard deviations of $σ_\mathrm{horiz}$ = ($3.0 \pm 0.1$) mm and $σ_\mathrm{vert}$ = ($3.8 \pm 0.2$) mm, respectively. This spot size is within the acceptance of the PUMA Penning trap.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
A multi-reflection time-of-flight mass spectrometer for the offline ion source of the PUMA experiment
Authors:
M. Schlaich,
J. Fischer,
P. Fischer,
C. Klink,
A. Obertelli,
A. Schmidt,
L. Schweikhard,
F. Wienholtz
Abstract:
The antiProton Unstable Matter Annihilation experiment (PUMA) at CERN aims at investigating the nucleon composition in the matter density tail of radioactive as well as stable isotopes by use of low-energy antiproton-nucleon annihilation processes. For this purpose, antiprotons provided by the Extra Low ENergy Antiproton (ELENA) facility will be trapped together with the ions of interest. While ex…
▽ More
The antiProton Unstable Matter Annihilation experiment (PUMA) at CERN aims at investigating the nucleon composition in the matter density tail of radioactive as well as stable isotopes by use of low-energy antiproton-nucleon annihilation processes. For this purpose, antiprotons provided by the Extra Low ENergy Antiproton (ELENA) facility will be trapped together with the ions of interest. While exotic ions will be obtained by the Isotope mass Separator On-Line DEvice (ISOLDE), stable ions will be delivered from an offline ion source setup designed for this purpose. This allows the proposed technique to be applied to a variety of stable nuclei and for reference measurements. For beam purification, the ion source setup includes a multi-reflection time-of-flight mass spectrometer (MR-ToF MS). Supported by SIMION simulations, an earlier MR-ToF MS design has been modified to meet the requirements of PUMA. During commissioning of the new MR-ToF device with Ar$^+$ ions, mass resolving powers in excess of 50,000 have been obtained after 150 revolutions, limited by the chopping of the continuous beam from an electron impact ionisation source.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
